CD drive doesn't write CDs

Help me please!!! My CD drive doesn't write CDs, but it still can clean CD-RW. What should i do?

Did you enable the burning function on the drive?
This can be done in the drive properties.
Furthermore did you use the burning application for example Nero?
I agree with Ivan. I think you should additional test different Medias because not every CD is compatible with the drive.
In the user manual you should find the list with compatible medias. In my user manual I have found such list.

Similar Messages

Drive does not write CDs faster than 16x despite advertised speed of 24x

CD tested was a 48-52x Verbatim branded pthalocyanine made by CMC Magnetics.

I think it depends on what your burning (data, music, etc.) and the data under run buffer... so "bad" CD's don't get created.

My cd drive on my macbook doesn't read CDs anymore. It reads DVDs. How do I get it to read CDs again?

My CD drive on my macbook doesn't read CDs anymore. It only reads DVDs. How can I get it to read CDs again?

Is it readable in a Windows computer? If not then you can try Disk Utility to repair the drive-- although that may be dangerous too.
I haven't had this problem so I out of safe ideas. There are ustilies out there. I used the seach term "repair flash drive Mac OS X" to locate some of these.
If the data is essential there are pay-for services to recover data looked the price was in the range $50 - $1000
All the best.

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Unable to read/write CDs/DVDs

I have a Sony DVD RW DW-U10A combo drive. I have been unable to write CDs for a few weeks now, but manage with my MacBook. Now however, the drive in the iMac doesn't see either blank or written CDs, or professionally produced CDs. This also applies to all DVDs.
The only, but major, change that I have made is to upgrade to Tiger. I cannot categorically link the problem with the upgrade.
Could this be the cause of the problem? What can I do to be able to read/write CDs while using Tiger?
How can I clean the CD lense if that is also contributing to the problem?
Thanks in advance
PG

Hello and Welcome to Apple Discussions.
You really need to repost over in the MacBook forums. The hardware is very different.
http://discussions.apple.com/forum.jspa?forumID=1172
regards
mrtotes

DVD Drive Doesn't recognize Media Disc

I have an Envy dv7. Product # B6B75AV. DVD drive hpBD MLT UJ260
I have a program that will copy a dvd from the source, dvd drive #1, to the target same dvd drive #1.
When it is done copying the disc it ejects the original and asks to have a writable media disc inserted.
When I insert the DVD the drive doesn't recognize the blank dvd, keeps asking for it, and when I put it in, it spits back out saying to insert a writable disc. I have used the blank DVD+R for burning other things so it should work. I tired putting in 4 different blank discs to make sure the disc was ok.
Is there anyway to find out for sure whether this DVD writer uses DVD+R or DVD-R?
Any help will be appreciated.

Hi,
You can view all the media capabilities of your optical drive using the free application on the following link.
http://www.vso-software.fr/products/inspector/inspector.php
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cd drive doesn't work since loading itunes

Since installing itunes my computer's cd doesn't work. How can I fix this problem?

Last month my girlfriend was trying to import songs from a cd into her iTunes (v4.7) on her laptop. Her cd-rom drive quit responding. The computer recognizes that the cd drive is there, but it won't recognize any disks. If you put a disk in, the drive doesn't even spin the cd. This happens when itunes is on and off. When I try to access the device via DOS, I get the message, "the device is not ready".
I figured that it was probably her laptop cd-rom crapping out. So, since she could no longer use her computer to put her songs onto her ipod, I was letting her use mine. I had an even older version of itunes V4.1 or 4.2. Now, I hadn't tried to import songs into iTunes in a long time. Lo and behold, I try to import a cd (Death Cab for Cutie:Something About Airplanes) and the cd stops responding. It's the exact same thing that happened to my girlfriends laptop. I tried to update to v5 but that didn't help. When I do the cd diagnostic, the offending drive says "Drive is empty".
On my computer, I have removed upper and lower filters in the registry...no change. I have never had easy cd creater, but we both have ahead Nero Burning Rom software. I can't boot from the drive. I have uninstalled the drive and let windows re-detect it...no change. Windows detects the drive, it just won't read anything...no audio cds, no data cds...
We are now down 2 cd drives and we only have one left.
Is this what you have experienced Randy?

Optical drive doesn't disks from a particular brand

I am trying to burn some video files to 10 DVD's, but my optical drive doesn't recognize 4 of the DVD's I use (which are all of the same brand and freshly bought) - and had a very difficult time with the other 6. DVD's of other brands he reads and burns fine as well as my rewritable CD which I've used a million and one times and is scratched all over.
The 10 DVD's work fine in the Windows PC and Laptop I have, just not in my MacBook...
Is there any way I can get the drive to be able to burn the other DVD's?
Below the stats of the optical drive with one of the 6 burned DVD's in it:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZF1E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: DVD-RW
ID: INFOMEDIA
Blank: No
Erasable: Yes
Overwritable: Yes
Appendable: No
Write Speeds: 1x, 2x

Other than trying to burn at a lower speed I suspect that there is little you can do. You could try a third-party disc burning application like Toast but that would be a lot more expensive that just trying several different types of media.
If you have an Apple Store nearby then you could probably take your disc to the store and try them in another MacBook at the store (it looks like you are using RW media, so you could rewrite them after these tests).
Of course, if after trying a few different brands you still find that you are having problems then you may just have a hardware problem with your MacBook's Superdrive. I suppose that you could also have a software conflict. Have you tried creating a new user account to see if the disc can be burned there (as a test)?

My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?

My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?
My quess is that the new software just doesn't allow the disk drive to work. I would love an explanation why this doesn't work and some help getting it to work. It's really frustrating because I get a bunch of CDs from work and never get to listen to them on my MacBook.

Make sure the discs are free of finger prints. The optical drive cannot read a disc with smudges and dust.
Check Finder > Preferences > General
Make sure: CDs, DVDs, and iPods, is selected.

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

Optical drive doesn't work all the time

My optical drive doesn't mount movies i bought on dvds. IT'S like it has a mind of its own, it only plays movies when it feels like it and forget any install dvds like Snow Leopard, printers etc...! What's the problem with it? I cleaned it and all my dvds are like brand new, no scratches or any thing.

Hello marinfo
Welcome to Apple Discussions
It is normal for all the fans to be running all the time.
If your iMac is making noise, then there is something wrong and you need to take it in for service.
Dennis

My external hard drive doesn't show up in finder, is it dead?

My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

So to give a little big of a background on my computer. I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation. I only worked on it [mostly brousing the web, and itunes] for about 6 months because I was taking all of my general courses for college. I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house. I was only Using it every now and then and it would be idle/ or shut off the rest of the time.
Fast forward to fall 2011. Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer. I installed a free 30 day trial of adobe cs5.5. It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it. After the trial ended I kind of stoped using my computer again, rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
Here's where it gets tricky.
So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space. I had to uninstall all of the programs one at a time other wise it would freeze up. I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while. Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen. So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.
So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date. When I do I get the gray screen with the apple and the spinning wheel. This happens OVER and OVER. I tried soft reseting it, manually turning off the computer, you name it. But it still keeps happening. So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up. But if I connect my external hard drive it shows up right away. I try seeing if it pops up on disk utility, and it doesn't show up there either.
Is it possible that my hard drive is shot? I haven't really used my computer that much. Its pretty much sat at my parents house for 2 of the 3 years I've had it. So its not like I used it a whole lot.
Help! I'm a college student who needs her mac now more than ever for my design classes!

The battery alone is a $5 to $15 part. Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more. This article discusses the varying successes of third party drives on iMacs:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

TM drive doesn't always mount on iMac startup

Hi,
TM seems to work well most of the time. Once in a great while though, TM drive doesn't mount on iMac startup, and if I don't notice the missing icon on the desktop, backups don't happen.
TM drive is a Seagate Free Agent USB 500G. It's connected directly, not through a hub. The drive has no power switch, so I leave it alone -- out of sight, out of mind.
Two questions:
1. Is is something that I am doing or the way I'm set up that causes this infrequent failure?
2. When I notice the missing connection, what's the best way to get the TM drive reconnected? What I do now to reconnect is: shut down the computer, pull the power plug on the TM drive, restart the computer, plug the drive back in.
Your thoughts appreciated.
Jerry

My understanding is that the disk doesn't mount, ie not visible to the system. In that event I can't see that changing Time Machine's disk allocation will achieve anything. It's a hardware initialisation issue.
If the disk isn't mounted (personally I'd check System Profiler to be absolutely sure) then there can't be any transfers going on so you should be safe to just unplug, pause to let the electronics settle and then plug back in. If that works, and the problem is rare, that might be the best way to go, although it might be that there is some problem with the drive which is not good if you are relying on it for back up. I don't know enough about hard drives to comment on that aspect (maybe it's just a driver issue?).

WD external hard drive doesn't appear on my Desktop or in Finder

Hi,
I have a Western Digital hard drive connected to my iMac (Intel). When I first intstalled it, it worked fine. Then it began to intermittently exit my desktop, generating the message This Device Was Not Properly Disconnected. If I restarted my computer it would usually return. However now I can't get it to appear on my Desktop at all.
I ran a WD Smartware check of the hard drive which indicated that it is fine. It powers on, the small white light is on, and I can hear and see that it is on. I also tried different data and power cables and ran Disk Utility, which said the WD drive was fine. The hard drive is connected directly to the computer, and to the wall socket, no buses, etc. I tried to download some pictures from my camera and got the error message Camera Window Does Not Recognize Hard Drive. Finally I tried connecting it to my laptop. The hard drive appears perfectly on the laptop and all my info, photos, backups etc, are there.
According to the WD website, if these are the results of the various trials, the problem is with a driver within my Mac OS. The WD drive doesn't have a driver of its own, it uses one that is built into the Mac OS, which WD says must have become corrupted.
I have no idea how to correct this! Does anyone have an idea?? WD says they don't know, only Apple will know.
I have two other older WD hard drives connected to my Mac as well and they work fine. They are different models though.
Thanks for any help!

Well now the two other WD hard drives are beginning to act the same way...

CD drive doesn't write CDs

Similar Messages

Maybe you are looking for