CD drive not communicating with computer
I get this as a message when my CD drive spits out disc without burning it:
"The disc can’t be burned because an unexpected error occurred (error code 0x8002006E)". The CD drive makes a loud noise and does not complete the burning of disc.
It used to be able to burn CDs, but now does not. Is there anything I can do, or does it need to go to the repair shop?
This is mot likely an issue to the optical eye of the drive tht does all of the reading writing.
You can try having it cleaned which you would have to get a cleaning disk for about 4 bucks and that will clean the eye.
Otherewise it would be to the repair shop for a diagnostics to see what exact part of the drive is having the issue and proceeding from there
Similar Messages
-
Network Drives not waking with computer from sleep after ML install(Wired connection)
Since installing mountain lion my network drives do not wake with the computer. The drive folders for them are not on the desktop. I have to go through my shared directory and click on the drives again for them to appear back on the main screen.
Any ideas?I tried the "usual" reset of PRAM and SMC and now it seemes to work correctly!
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT3964 -
Printer not communicating with computer
I have a mac x 10.5.8 - I have an HP F4280
My printer is no longer connecting with my computer. I have tried different USB cords and its still not working.
It will photocopy and all the lights are on.
I followed the troubleshooting guide and deleted the printer. it will not communicate at all.
I followed all troubleshooting guides and still nothing. Any help would be appreciated.Hi AshleyAnne1234,
Welcome to the HP Forums, I hope you enjoy your experience!
I see by your post that the Mac isn't communicating with the printer.
I will be happy to help you.
Restart the Mac and the printer.
Check the system profile to see if the printer is being recognized at all on the Mac.
Go to the Apple, select about this Mac, click more info, select hardware on the left side of the window, then select USB under hardware, on the right hand side of the window it will list all the USB devices connected.
Check to see if the printer is listed.
If the printer isn't listed then try another USB port on the Mac.
I would try the printer another computer to rule out the USB port on the printer is damaged if you have one available if you are still having issues.
Please let me know if you need further assistance.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Destjet F4480 not communicating with computer
This printer will not communicate with my new computer since we changed to 8.1. We have tried everything, my computer now says HP is there, but nothing will print.
This question was solved.
View Solution.Bev73,
Its possible you have some print jobs stuck in your print queue, Here is a link to a document that might help
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02205477&lc=en&product=3742086&tmp...
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star** -
Iphone not communicating with computer
iPhone4 not connecting to computer - when i first accessed it it recognised it and made it so i could start using my phone but now after plugging it in again nothing is happening - it doesnt even charge!! however if i turn the phone off and plug it in then it turns itself back on again but again it does not charge or connect to itunes - i have tried services.msc in the run menu and the apple device has started so i am very confused - please help only got my phone 2 days ago!!!xxx
Hi,
Have you tried a Reset on the Phone...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Turn the Phone On...
If that does not help... See the Information in these Links:
Device Not Recognised
For Mac
http://support.apple.com/kb/ts1591
For PC
http://support.apple.com/kb/TS1538
Device Frozen
http://support.apple.com/kb/ts1445 -
Keyboard not communicating with computer
When I first boot up my HP All In One, I try to enter my login information but no characters appear. So I restart and am able to log in. But the keyboard stops working. When I hit a key, nothing appears on the screen and I hear kind of a beep (not like normal keyboard sounds).
The keyboard works on my Dell laptop (I'm using it there now) so I figure it must be the keyboard software on the HP. But if I download any software updates for the HP, how can I input my product information without a working keyboard?
The HP is only about 2 months old, by the way.
Thanks for your help.hmm Im not really a a tech export or no anything about the HP all in one models but with most computers you can buy a replacement keyboard that if the computer has the right ports such as a usb port you can plug in a new keyboard.
-
BB not communicating with computer & an"Uncaught exception: java.lang.NullPointerException" issue
I am stuck between a rock & a hard place. I would really like some advice that will prevent me from losing all of my contacts data.
Firstly, I have not backed up any of my data from my BB! I have now very quickly tried to rectify this today, uploading the software and downing loading all updates.
I have some corruption or other on the BB that has caused me to lose 4 of my 5 email accounts and also unable to access the unread emails in the remaining account or text/call out.
One of the messages that I get on the BB is Uncaught exception: java.lang.NullPointerException (the other is longer and I cannot remember what it said, but it was similar).
I have read that I need to backup, wipe then restore to get rid of the corruption. My problem is that I cannot back up therefore if I go ahead and clean the BB then I will lose all of my data?
Is there any way I can transfer the data to my SIM card - it isn't a lot at all, maybe 100 contacts............
Looking forward to a solution, have spent all day mucking around with troublesome technology - when I had so many more important things to do......
Thanks in anticipation.Hi and Welcome to the Forums!
Reloading your OS is best done via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
You can use any OS...you are not limited to your carriers. If you do use an OS from other than your home carrier, then insert, between steps 1 and 2 in the above, the deletion, on your PC, of a file named VENDOR.XML.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
OfficeJet Pro 8600; scanner not communicating with computer
When I try to scan, it appears as though the OfficeJet Pro cannot communicate with my computer. The computer is connected to the internet, and the OfficeJet Pro is connected, but it won't scan. I have used the Office Jet Pro for these purposes before, and it appears to have stopped working all of a sudden. The error message says "no computer found."
Product Name: OfficeJet Pro 8600
Product #: CM749AHi shoffice, and welcome to the HP Forums!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Please let me know how that goes.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Computer not communicating with printer(s) scanner
I recently hooked up an Officejet J6480 wireless printer. I also have a J5780 hooked up via USB. After hours, and I mean hours, of being on-line with Tech Support through Chat and uninstalling and reinstalling, several times, and trying numerous things, neither printer has communication with the computer for scanning. The J6480 will scan if you go through Paint so it is functioning. The J5780 I haven't tested. I have downloaded drivers and every other thing that was suggested and the computer is not communicating with the printer for scanning. I have a Dell computer Inspiron 530S and am running Windows Vista (32) May I also say, that I disable the Firewall & Virus programs when downloading, etc. so it doesn't interfer. I have tried everything but dynamite to get the scanner to respond. I've downloaded the Patch suggested in the drivers listings and everything. Im beside myself because the J5780 scanned fine until I installed the J6480. Now the window on the printer says there are no scan settings available in the window on the printer. Chat Techs, I think, are beside themselves too. I uninstalled the J5780, installed the J6480 and then went into 'Add a Printer'. Everything went fine except the scanner. I get a message from Solution Center saying there is no communication between the computer and the scanner. I think something is missing here. If anyone knows a solution I would be more than grateful. HELP!!!!
Did you do an L3 uninstall of all HP software and start from scratch? The L3 uninstaller should be on the install CD's for each printer. You may have to do a search of the CD to find it.
Tell me what router, ISP and encryption type you are using? Also, what kind of security software are you using?
Have you done a WIndows Update and updated your security system? Do that between the L3 uninstall and the re-install.
There is a lot going on here. I'll hang in there with you...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Imessage on my computer not communicating with my phone.
Imessage on my computer not communicating with my phone. In my computer settings my phone number is no longer an option, just my email. How do I get it back?
HI,
I had this.
On checking the iPhone the iPhone Number was not ticked and the whole option to change it was greyed out.
I removed the Apple ID and waited to see if th Number got ticked (Settings > Messages > Send and Receive).
It did not.
I put the iPhone in Airplane Mode
After a few minutes I "restarted" the iPhone by turning off Airplane Mode
This time the Number was ticked.
I Added the Apple ID and then restarted Messages on the Mac.
I soon got the pop message about the iPhone using it's Number and the Apple ID and Accepted.
8:45 PM Wednesday; March 13, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My iphone 3gs is not communicating with itunes and in windows there is an exclamation mark
my iphone 3gs is not communicating with itunes and in windows there is an exclamation mark next to the usb device. tried removing itunes and reloading, all softwares up to date. just got a new iphone 4s which is on charge but not switched on and used.
For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
For Windows XP http://support.apple.com/kb/HT1925.
Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver. -
My addressbook is not communicating with iTunes!!HELP!!
I can't sync my IOS devices with my last version of the address book! I updated my address book in my Macbook Pro OS X 10.6.8 and then it is not communicating with iTunes. I tried the 28 step troubleshooting to this issue, my iTunes cache is clean but still not syncronizing... Tried to use iCloud online to upload the vcf cards but in each group it losts a lot of contacts (and I don't know why, because they are far away from the iCloud limits...).
For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
For Windows XP http://support.apple.com/kb/HT1925.
Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver. -
My MacBook is not connecting to the host computer for the printer. The host computer has a static IP address which is different from the IP address that the laptop is looking for. How do I change the laptop so that it looks for the host computer's correct IP? The laptop is connected to the router. I know this because I can get on the internet with the laptop.
The host computer is Dell and the operating system is Windows 7. The printer is an Epson, and it is wired to the host computer with a USB cable. It does have host printing turned on.
The three have been working harmoniously for a long time. The router had to be reset; and after that, the MacBook documents would no longer print.
We created a new static IP address on the Dell but the MacBook is not recognizing it. We have researched the internet trying to figure out how to make the MacBook locate and recognize the correct IP address from the Dell so they can communicate with each other. The laptop is not communicating with the host computer because is is looking for the wrong IP. The host IP is 192.168.1.245 and the laptop is looking for 192.168.15.237.
I hope everything is clear. The person who originally set it up is no longer available to help me. Thank you for any help you may give me. -
my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanksThe same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!
-
Help DSCC agent not communicating with AppServer or Tomcat?!
Installing Directory Server Enterprise Edition 6.3 From Zip Distribution on system running Solaris10 11/08.
Cannot get DSCC to work with either AppServer or Tomcat.
Both AppServer & Tomcat deploy DSEE WAR file and I can look at things that I have manually registered via command line. Cacao agent is running it is just not communicating with AppServer or Tomcat so it cannot commit any actions such as starting and stopping directory instances or creating new directories instances within the web app.
Is this a bug that occurs only when doing a new install using the Zip Distribution?
The Error message I get regardless if Appserver or Tomcat is:
"Could not contact the DSCC agent on <server>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11169."
I changed to port 11169 because it had a conflict on default port 11162.
Output from cacaoadm & dsccsetup commands is follows:
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
default instance is DISABLED at system startup.
Smf monitoring process:
8423
8424
Uptime: 0 day(s), 0:47
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-params
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11169
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags=-Xms4M -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8
java-home=/local/jre
jdmk-home=/local/dsee6/private
nss-lib-home=/local/dsee6/private/lib
nss-tools-home=/local/dsee6/bin
retries=4
enable-instrumentation=false
network-bind-address=0.0.0.0
root@dsee:/ $ /local/dscc6/bin/dsccsetup status -v
## /local/webconsole/usr/sbin/smreg/smreg is MISSING
## /local/webconsole/usr/sbin/smcwebserver/smcwebserver is MISSING
## /local/dscc6/dccapp is present
Sun Java (TM) Web Console is not installed
## /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm is present
## /local/dsee6/cacao_2/.configured is present
## /local/dscc6/lib/jar/nquickmodule.jar is present
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param network-bind-address
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param jmxmp-connector-port
Cacao uses a custom port number (11169)
## /local/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /local/var/dscc6/dcc/ads
Port of DSCC registry is 3998
Any work around or ideas on how to get DSCC working?
Thanks!I started over and installed Glassfish and everything just worked. After the fact I think the real problem was related to the server.policy file. I think this was the problem because using the default appserver 8.2 that comes with Solaris has a different path and I got this same error when tried using tomcat also. When installing glassfish it uses this default path as in the server.policy example as follows so it just worked.
Add the following lines in the {install-dir}/domains/domain1/config/server.policy file
// Permissions for Directory Service Control Center
grant codeBase "file:${com.sun.aas.instanceRoot}/applications/j2ee-modules/DSCC/-"
permission java.security.AllPermission;
Hope this helps some as I was really stuck and confused at the time and just started playing with the stuff. Growing pains. Thanks to those that replied.
Thanks!
Wences
Maybe you are looking for
-
HT4913 can someone tell me how to add my pc to itunes?
i dont want it on itunes match its saying going to cost me a yearly subscription.
-
Hi, i am using SO_NEW_DOCUMENT_ATT_SEND_API1 function module to send a mail of my text file to the customer. My problem is, the attachment file alignment is not correct. that means it is not aligning to the left or right. i am using tables paramet
-
I have the latest MacBook Pro, 17 inch. After putting the MacBook to sleep, I lose the sound to applications like iChat and Mail. I don't know how to get it back other than restarting the computer. Suggestions anyone?
-
Which Version Should I download/install
Hello All, I want to download and install an oracle product but unable to understand if I should download 32 bit or 64 bit. Please help me out. The uname -a gives the following output. oracle@host:/home/oracle> uname -a Linux localhost.locadomain.com
-
I created a word doc using Acrobat XI Pro and cut and pasted from other documents into my document. For some reason, some areas of cut and paste have the error message, "this image cannot currently be displayed". Do you know why this could be? Odd