CD drive not found after installing Itunes

When I install Itunes on my computer - the computer can not find or open my CD drive at all. If I uninstall and reboot the CD drive shows up and operates. I have tried to reinstall, update drivers, etc with no luck. Any thoughts??

I have seen several other people with the same issue. The problem seems to be some level of incompatibility between the Gear Software CD/DVD filter driver used by iTunes and some CD/DVD drives under Vista. I too have a Dell with the same problem, but I'm not holding my breath for a fix. The only workaround I know of is to to remove the GearAspiWDM filter driver from the registry. If you do this and reboot, your DVD drive will show up again, and iTunes will work except for burning CDs or DVDs. ITunes will also complain about drivers being installed incorrectly whenever you open it.
Here's the registry key to remove:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}\UpperFilters=GearAspiWDM
I'm not sure whether the problem is with Vista, Gear Software, iTunes, or the Dell DVD drive firmware. But, getting all the parties working together to resolve this one will be next to impossible in my opinion.

Similar Messages

Cd-drive not recognised after installing itunes

after I installed itunes, my computer didn't recognise my cd-drive, in properties for the drive it states the following
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)

I have seen several other people with the same issue. The problem seems to be some level of incompatibility between the Gear Software CD/DVD filter driver used by iTunes and some CD/DVD drives under Vista. I too have a Dell with the same problem, but I'm not holding my breath for a fix. The only workaround I know of is to to remove the GearAspiWDM filter driver from the registry. If you do this and reboot, your DVD drive will show up again, and iTunes will work except for burning CDs or DVDs. ITunes will also complain about drivers being installed incorrectly whenever you open it.
Here's the registry key to remove:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}\UpperFilters=GearAspiWDM
I'm not sure whether the problem is with Vista, Gear Software, iTunes, or the Dell DVD drive firmware. But, getting all the parties working together to resolve this one will be next to impossible in my opinion.

Windows XP drive not found after install

After installing Windows XP on boot camp, I have found that the computer will restart and then fail to find the drive I have just installed windows on giving me an error message something like "Cannot locate boot disk". If i restart into OSX then it finds the drive but i cannot boot into windows because it will just display the error message. If i try installing Vista this works fine but Vista is shockingly awful and i would sooner have XP. Any ideas??

Evening all
Have you disabled any Norton, KAS, antivirus anti spyware programs?
Did you set a restore point prior to installing the Sp3?
Which method did you install the Sp3 from? full adminstrator account or apply the subinacl program and reset.cmd ?
There may be other problems prior to install of Sp3, Are the bios,of the systems you are using, the latest version?
What type of system are you using?
Are you using the latest W.H.Q.L. Microsoft signed drivers video available for your system? 174.74 from Nvidia, 8.4 catylst for ATI/AMD?
If you are using X2 processor both the processor driver and the dual core optimizer. You cannot depend on the Sp2 driver for proper operation.
What about chipset drivers?
And the mouse, and other perpherials?
If you have any unsigned drivers you will have endless reboots.
If you check the system to see if safe mode is available you can trouble shoot what is happening
*Press f8 prior to the Windows splash screen*
Log in as adminstrator *Full one*
If you are using an AMD machine, check the regedit for the following key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm\Start
If this key exists change it to 04 Hexdecimal and reboot.
as seen here
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3072752&SiteID=17
If you are still having problems see follow the advice at the end of this posting and add what problems you are having. And send the logs after a MSFT team member responds with an address.

HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

MY PRINTER " HP Deskjet Ink Advantage K209a" OPERATING SYSTEM Windows 8 32 bit
Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
[Personal Information Removed]
Please give me a suggestion

Hey 101214,
I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a). I also see that you need a driver link for this OS and Printer. Please follow the link below to download the driver for this printer/OS combo.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
If you need information on how to perform the USB installation on your Windows 8 PC please click here.
I wish you the best!
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Entry point not found after installing last update (itunes 11.1.4.62)

itunes just prompted me to install an update, so I did. Now I can not open iTunes at all. I recive the following message:
iTunes.exe - Entry Point Not Found
The procedure entry point
?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
could not be located in the dynamic link library :\Program Files
(x86)\Common Files\Apple\Apple Application
Support\WebKit.dll
I have already tried to restart, and repair both iTunes and Apple Application Support.
I had no problems prior to installing the latest update. What can I do?

iTunes.exe - Entry Point Not Found
The procedure entry point
?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
could not be located in the dynamic link library :\Program Files
(x86)\Common Files\Apple\Apple Application
Support\WebKit.dll
Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5

It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread. I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1). It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz. It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down). Then it had trouble booting into windows. I ran startup repair to no avail and decided to do a sytem restore. My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine. I went back to that point and the machine worked fine again. Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8. I did another system restore and have not put iTunes back on. The system is working fine. I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer? I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch. Anyone else seeing this? Apple employees...a little help here? Any input?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

Windows 7 will not launch after installing itunes 11.1.5.

I initially tried updating itunes but it wouldn't so I uninstalled all Apple products in order per another post I found. Then reinstalled all products and itunes worked fine. I then shut down my computer for the night, then next day windows wouldn't launch. I did a system restore prior to the itunes update and windows works fine. I tried reinstalling itunes again and had the same problem. So now I don't have itunes installed. Anyone know how to get itunes to not prevent windows 7 from launching?

My MBP (15", early 2009 model, 8GB RAM, 1TB internal drive) showed in Software Update as not needing any other updates, and I downloaded from Apple's site directly and installed iTunes 11.1.5 rather than doing it via Software Update (I've had some glitches with the 'direct' install from SU in the past, so I manually download updates from Apple's support website instead).
Hoping Apple will figure out what's wrong with this version under 10.6.8...

Creative folders not found after install

This a dbl post in sme ways. I by accident checked solution on my other post. Any way here is what's going on.
I found the drivers I was looking for but can't understand why this is happening. After installing I still can't see anything related to Creative when I look in ALL PROGRAMS. This means I have no icon that would allow me to change from Game mode to entertainment. It doesn't even show up that I installed the drivers in the add remove section or anywhere ion the hard drive. So even if I wanted to uninstall the drivers they're no where to be found. But here's the crazy part. My speaker icon in the task bar shows I have sound and that's it's creative.
What is up with all this. I've found the right drivers and even when I install it will say this.
Please insert disk that contains the file layout.bin
I've not expeirenced this since I first purchased the card. The funny thing here is I own about 20 Creative sound cards. Most are new from the Extreme music to the X-fi Titanium all the way back to SB LE on XP machines. All have had one issue or another with the drivers but I figured things out. With this issue I have no clue why nothing shows up. I've used driver sweeper and a reg cleaner I trust and works. I've also contacted support last night asking for help with the drivers. Funny thing is the support rep gave me the wrong ones, talk about not knowing your job. That's when I downloaded the right drivers and end up with this crap of an issue.
Would like some help from a mod please.
Window 7 Ultimate 64
i7 980x @ stock
EVGA X58 SLI
2GB of Gskill @ 600
300GB VelociRaptor-Seagate Terabyte-4 external 2 terabye
MSI GTX 460 in SLI
X-fi Fatality- original one from 05-06, the red F on the card still even lights up.. surprised
860 PC POWER & COOLING
ASUS VE278Q 27" 2ms
Logitech 5300Z 5.
G9x-G5-CM STORM GAME MAT
That's what I'm running in a nut shell. Thing is I can't understand why the cards not showing up anywhere on my C: drive which is the Raptor. Need help as I need sound. I'm a 39 old gamer and in tourneys right now. Can't have no sound or I die. Also means my team mates can'r hear my either.
Thank you.

In all my years of running web sites for PC issues and modding info I've never seen one so useless at this one. Obviously you mods are employeed to look this site over and offer assistance. But as I can see your not doing your job. I can also see this place has no forum guru like most sites do. He or she is usally the one answering the questions because the mods are know where to be found.
Am I upset yes I am. This card worked the other day but after a reload of Windows not one driver works. I'm not even sure the drivers I found are the correct ones. As stated before I contacted support and was given the wrong drivers to install. In fact simple questions couldn't be answered. That leads me to believe they are not from the U.S. And if they can't understand me why even have support for the U.S. So here I sit with a sound card in a $3,500 PC that I can't do much with because I can't hear anything.
NO CONSOLE LAUNCHER
This device supported by this application is not detected. The application will exit.
Please insert disk that contains the file layout. bin
I've pt in what model X-fi I have which is SB0466 and takes me to the drivers for that card. I then proceed to DL and then install. After that I get to the panel to check for updates. While their I notice it says my card is a Fatality Champion Series. WOW that's new to me as it doesn't show that in the driver section for my card. Any way while it's looking for updates it comes back and says my card is all up to date. Really now, in the past after installing drivers it would look for updates and say these that are critical need to be installed. It really didn't say that but critical means now in my book. Those that were critical were the the console launcher along with Alchemy and some other update.
So someone please explain to me and everyone else here why Creative drivers are worse then ex wi'ves. Every time I go to instal a new creative card it's like walking into the house and seeing the now ex and knowing it's going to be a living hell. Problem we have here and I know this for sure is know one knows about these issues. I'm talking about those who monitor companies for lack of keeping the customer happy.
One more thing that is rediculous. Who set up the section for the drivers. Honestly when you go into the area the listing for X-fi can confuse some. Yes even me who has a high understanding of the ins and outs of computers. And still when you type in the model # of the card it gives you the wrong drivers... unbelievable.
Very unhappy here as this has happened way to many times with Creative. Glad were having a Tech Trade Show here In Milwaukee April st and 2nd. Companies like ASUS, Coolermaster, MSI and so on will be here. Going to ask ASUS and MSI why Creative cards don't work with their products. I'm also going to ask when has it become the norm to ignore the consumer in forums.
I'm also going to make a video of me doing the installation of the drivers. It will be for any Creative employee who wants to see that I'm not doing anything wrong.

Help Please: Big Bang-XPower: hard drive not found while installing Windows7 x64

I bought an MSI Big Bang-XPower MB and was trying to install windows7 x64. I have a WD raptor 150GB and Samsung 1TB hard drives. Both drives show up in BIOS. SATA controller setting is in IDE.
after I clicked at the "install" icon, a window showed up telling me that no hard drive was found. I have seen this problem before with my old MB. All I needed to do with that MB was to load a driver for the hard drive and problem solved. Does anyone know which driver (name and version, please) is the right one for this MB? I went to the MSI driver page and there are several of them. and some of them give me about 50 drives to choose from (I tried about 10 of them but neither worked).
Also, is IDE or AHCI more appropriate for this MB with Windows7?
Thanks for any help.

i downloaded and unzipped the file to a USB drive. it instructed me to press F6 to load the driver, but i couldn't find this screen while I was installing windows7. at about what step does this normally show up. i can see this if i were installing xp or vista.
anyway, when i click at the load driver with the IDE setting, nothing was found. There was a driver when i changed sata setting to ACHI, but the computer told me that was not a valid driver.
does the drive package have to be loaded in a floppy disc?
anyway, called tech support and was told that the xpower was one of their newest MB. and the tech rep told me that he had never heard of this problem before. he had no idea what he was talking about. Fail! lol

Gdiplus.dll not found when installing itunes 10

Hi, went to open iTunes today after a few weeks of not using it, received the following msg: 'iTunes exe: unable to locate component, this application has failed to start because gdiplus.dll was not found. Reinstalling may fix this problem' so I downloaded itunes 10, restarted etc, got this error again followed by 'iTunes was not installed correctly, please reinstall iTunes. Error 7 (Windows error 126)'. I've uninstalled & downloaded iTunes again but no joy, can anyone help please?

Curses.
One trouble with Gdiplus.dll troubleshooting is that there are so many of the little beggars on a PC. I've got 18, for example. The capitalisation of the copy you're having trouble with indicates the copy in question might be down in your Side-by-side configuration, but there's a lot of different ones down there too.
Okay ... if it's one of the Side-by-Side copies that is giving us grief, then plausibly a repair install of your .net framework may be of some assistance as per:
[iTunes for Windows: "iTunes was not installed properly. Please reinstall iTunes" message|http://support.apple.com/kb/TS3074]
... any luck with that, supple?

External Hard Drive not working after installing mavericks

After installing mavericks, I hooked up my external hard drive,
and it would not show up on the computer. Tried checking if
it showed in utilities, also a no show.
Should I uninstall the ntfs software which is a few years
old and instal a newer version?
Looking for a solution which doesn't involve reformatting my nearly full
1TB EHD, please :)

I think I have version 10.8.6 of mavericks, not 10.9.

Error 404--Not Found - After Installing Essbase 11.1.2.2

Hi,
I have experienced error.
I have one box of EPM 11.1.2.2, using Windows 2008. After installing Foundation and configuring it, there's no problem at all. I can open workspace and interop as well.
However I added Essbase, installing and configuring it. But after installing Essbase, I managed to turn on Hyperion Shared Service again, it didn't work.
The error says:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
What I have done is reconfiguring Shared Service, Essbase also. But no luck at all.
Does anybody have the clue, please advise. Thanks.

Hi John,
I got error like this on the log:
<Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 15, 2012 1:06:18 AM ICT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jun 15, 2012 1:06:19 AM ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
<Jun 15, 2012 1:06:20 AM ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jun 15, 2012 1:06:22 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 15, 2012 1:06:22 AM ICT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 15, 2012 1:06:22 AM ICT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
<Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 15, 2012 1:07:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:07:45 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:08:10 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:11 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
COMP ID = oracle.EPMOHPS
Hyperion Provider Services - Release 11.1.2.2.100.2167
Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
<Jun 15, 2012 1:08:12 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
javax.servlet.ServletException: Cannot initialize Provider Services server framework.
     at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'APS [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
javax.servlet.ServletException: Cannot initialize Provider Services server framework.
     at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: javax.servlet.ServletException: Cannot initialize Provider Services server framework.
     at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
Essbase® Administration Services - Version 11.1.2.2.100.2176
Copyright © 1991, 2012 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Fri Jun 15 01:08:14 ICT 2012
Server started successfully
Waiting for client requests
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:16 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
**********Getting connection from hub connection pool..Testing JNDI connection....
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
javax.servlet.ServletException: DSF initalization error null
     at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SHAREDSERVICES [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
javax.servlet.ServletException: DSF initalization error null
     at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: javax.servlet.ServletException: DSF initalization error null
     at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "prefs" failed to preload on startup in Web application: "workspace".
EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
     at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
     at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
     at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
     at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
     at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WORKSPACE [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "prefs" failed to preload on startup in Web application: "workspace".
EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
     at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
     at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
     at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
     at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
     at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
     at com.hyperion.css.CSSSystem.initCSSSystem(CSSSystem.java:318)
     at com.hyperion.css.CSSSystem.getInstance(CSSSystem.java:272)
     at com.oracle.workspace.Repository$PrefsStore.initialize(Repository.java:2917)
     at com.hyperion.bpm.prefs.PrefsServlet.init

6 in 1 card Reader not found after installing Windows 8 - HP Pavillion Dv6

I am running a dv6874ca and after installing Windows 8 the 6 in 1 card reader no longer works - the system does not read any information. I cannot find the card reader in the device manager.
Note: I am trying to view a Sony Pro Duo card which was possible before installing Windows 8. The only item that appears under "disk drives" within the device manager is my hard drive.

Try these drivers:
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45112.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

CD drive not found after installing Itunes

Similar Messages

Maybe you are looking for