CD drive not reading Audio or Photos intel core 2 duo Mac - says there is nothing on disc / Blank - Is there a fix ??

CD drive not reading Audio or Photos
intel core 2 duo Mac -
says there is nothing on disc / Blank - When there is
Is there a fix ??

At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Disc Burning & report what it says, like ...
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Similar Messages

My Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?

my Macbook Pro with 2.16GHz Intel Core Duo (Mac OS X v10.4 Tiger) can convert to Lion?
Toyoo

These are some of the most common Questions (Q) and Answers (A) about Lion:
Q: What are the system requirements of the Lion upgrade?
A: Core2Duo, Core i3, i5, i7, and Xeon Intel CPUs with 2 GB of RAM in a Macintosh computer with 2 GB of RAM, and 4 GB (7 GB after installed) for downloading from the Mac App Store (Available in 10.6.6 and later). Unofficially, past upgrades have arbitrarily also required an additional 15% of the hard drive to be free for data.
Q: What applications are compatible with Lion?
A: http://roaringapps.com/apps:table provides a nice third party editable listing for people to include the compatible applications. Many of these compatibility entries came from before Lion's release. Please verify they are correct now that it has been released, and help edit it for more accurate data. Be sure to include any update version of Lion post release that you have found is or is not compatible with it, for the help of others who may be upgrading to Lion the first time. Additionally, as it was released, there is no Rosetta. This means any application that is stated to be PowerPC in the System Profiler, will not work with Lion, and needs a comparable application or upgrade to be compatible. The System Profiler is in Apple menu -> About This Mac -> More Info. Intel and Universal applications are on the whole supported, though may still need some tweaking before every feature is compatible.
Q: Are there any pitfalls to watch out for?
A: With all upgrades, backing up your data at least twice has been a given. Hardware can fail independently of downloads and upgrades, though may happen simultaneously. Software may be found to be incompatible that has not been tested with the new upgrade, or combination of other software that might be installed with the upgrade. It is also strongly recommended once your backup is complete, to shut down your computer, remove all but Apple wired keyboard and mouse (notebooks remove all input devices). Then once done, reboot, and go directly to the upgrade distribution system available. Third party system tools, modification, and "maintenance" applications should be verified as compatible, or removed until known to be compatible. Check with developers how to remove if it is essential to use Lion before those applications become compatible. Most "maintenance" tools that deal with system cache, prebinding, are not really maintenance tools. Ask on forum when are the appropriate times to use them before assuming they should be used for upgrades or otherwise.
Q: How can I get from 10.4 or 10.5 to 10.6.6?
A: Purchase a 10.6 retail installer from an Apple retail or third party reseller. It has a picture of a Snow Leopard on the DVD, and does not say Upgrade, Dropin, or OEM. Install it, and then install the 10.6.6 combo update from:
http://support.apple.com/kb/DL1349
Q: Is it true that I can only get it from the Mac App Store?
A: Presently this truth is based on current documentation as of the writing of this article. It may change, but we can't speculate as to its change. It has a better chance of changing if users request something different at:
http://www.apple.com/feedback/macosx.html
Q: What limitations might one encounter if it doesn't change?
A: First off the 7 GB space limitation on the hard disc after it is installed. Secondly, the size of the download file requires significant time, unless you have a high speed broadband connection. Times expected are below -
4 GB at:
5Mbps is 2 hours.
at 1 Mbps is 10 hours.
at 384 kbps is 27 hours.
at 56k kbps is 184 hours (nearly 8 days).
If you include the 10.6.6 combo update of 1.06 GB
add 29 minutes for 5 Mbps
145 minutes (2 and 25 minutes) for 1 Mbps
6 and a half hours for 384kbps
A 24 hour day and 15 hours (for a total of a minimum of 39 hours) for 56kbps
Remember the retail 10.6 currently does not include the App Store, and those upgrading from 10.5.8 or earlier will need to both buy the retail 10.6, and download the combo 10.6.6 update, not to mention ensure they have the correct processor and 2 GB of RAM. Finally once it is available, you'll have find out how long approximately it takes to install after the download is complete.
These times do not include installation time, which on a MacBook Pro 3,1 15" installing on a Firewire 800 Newertech Voyager with WD10ACS-322J80 drive, 10.6.7, took 1 hour and a half to complete the installation from double clicking the install command to the registration screen. These times may vary by connection speeds from a non-dedicated connection, or background application usage of the internet. Any applications running when the installation process begins might interfere with the installation itself, and they should be quit first.
The installer just before it starts has in its package contents an InstallESD.dmg file a DVD burnable image to install on additional computers in the home without downloading over again. So if you desire to reinstall without an extra internet download, extract that file, by selecting the installer in the dock, and control-clicking it, and revealing it in the Finder. Next Control-mouse click it, and select show package contents. Inside that folder is a Shared Support folder. That's where you find the DMG.
Q: If I purchased a Mac recently, can I get it cheaper?
A: Yes, visit http://www.apple.com/macosx/uptodate/ for details.
Q: When will Lion become available?
A: It became available July 20, 2011.
Q: Which Macs can run Lion?
A: Look at Apple menu -> About This Mac -> More Info, and see if you meet the Machine ID and RAM requires under the hardware. 2 GB is required for all These Machine IDs will run Lion:
Mac Mini 2,1 and later
MacBook 2,1 and later.
iMac 5,1 and later.
All MacBook Air.
MacBook Pro 2,1 and later
All MacPros.
The Macs with the Machine IDs below will not run Lion (x can be any number):
Mac Mini 1,x or PowerMac x,x
MacBook 1,x
MacBook Pro 1,x
iMac 4,x, 3,x, 2,x, 1,x
Authored by a brody

HT4759 Can I install 10.7.4 on an Intel Core Duo Mac?

Can I install 10.7.4 on my Intel Core Duo Mac?
I currently run Snow Leopard, but as of a month ago my calendar no longer can connect with the server. From the discussion threads it seems that it has to do with iCloud. I'm going crazy not having my iPhone synch with my desktop.
Can anyone help? All I want is for my calendar to synch with my phone.
Thanks!!

Lion needs Core2Duo ... CoreDuo is not enough.

Will 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?

I kinda asked this as a follow up in another thread. But I really should have asked it in a separate thread here.
Will a 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?
Additionally, it comes with 10.4 and IPhone needs 10.5.4 or better. Can I download and upgrade to 10.5.4 free from Apple or will I have to purchase the upgrade?
Jerry

The hardware is more than sufficient. You will have to buy 10.5 (Apple does not have upgrade pricing).

Increase fan speed on Intel Core Duo Mac mini?

I have owned a PowerPC G4 based Mac mini for some time now. It's been (and continues to be) a great little computer.
Just recently I bought the Intel Core Duo version. It too seems like a great little computer.
However, I've got to admit that the amount of heat the Intel version puts out is staggering. The internal hard disk claims to be running around 119-126 degrees Fahrenheit. I put a thermometer near the vent on the back and it topped out at 120 degrees F. The bottom pad is nearly too hot to touch. This computer is running a distributed computing project.
Far be it from me to second guess Apple's engineers, but the fan is never turning very fast at all on the Intel mini. It is running, though, and appears to be doing as it was designed to do. (I've seen my PowerPC machine get to rip-roaring during the summer.)
Running the Apple Hardware Test shows that the Intel mini's fan can speed up quite a bit. I'd like to know if there's a way to request a higher fan speed outside of the Hardware Test. I know I could pop the thing open and just "forget" to reconnect the fan speed sensor wire to command the fan to run at full speed, but I don't want to invalidate the warranty.
Maybe I'm being silly, but I prefer that my computers be moving enough air from them to keep things cool regardless of noise level.

The smcFanControl utility is what ended up solving this problem. Turning up the fan speeds just a little bit resulted in a very noticeable cool-down.

10.4.6 killed my new mini intel core duo mac

Everything worked perfectly on my mini intel mac before the 10.4.6 upgrade.
Now most of the applications (idvd, comic life aso) crash at startup. Itunes runs but, when I try to import a file, it crashes... WHAT'S HAPPENING??
Why do Apple sends software updates that doesn't works??
My mini intel mac is 10 days old (no other external application or plugin...). It's new, but after only 10 days it looks like an old computer that doesn't work.
It's incredible but 10.4.6 seems (at the moment) running ok on my old (non-intel) powerbook G4.
Would apple PLEASE give us a help for these problems???
ty

The world is not black and white. I'm saying that on a rare occasion it is possible for even Apple to sell unhealthy systems by accident. No manufacturing plant is perfect. And even the slightest error can be cause for concern about the health of the system.
The fact there have been successful installs of every variety (combo, delta, Software Update):
http://discussions.apple.com/thread.jspa?threadID=435203&tstart=30
Says that the testing for it was good enough to make it work. The problem is some mitigating factor on your particular system which caused it to fail. Either the computer itself has something unhealthy on it, it has bad cache files, or bad preferences, directory, or drivers for something which 10.4.6 has no support of because the third party drivers were poorly written. Don't pin the blame on 10.4.6 unless you can explain why each of us who has had a successful install are not seeing failures. It is also possible you downloaded a corrupted update (this can happen a lot with large files over dialup internet, and is a limitation of that technology).
Yes while it would be nice for it to always work, if you installed any third party items, or have bad hardware, there is always something that may cause it to fail. Backup your data prior to installing any update, and be prepared as I say with the upgrade tips I've mentioned. If you need a translation for them, I'll be happy to find someone who can translate it.

Will iSight work with Intel Core Duo Mac Mini?

Maybe it's a stupid question?

yes yes yes yes yes. it will work. but not need to make yourself feel stupid

Benchmarking software for Intel Core Duo macs?

Does anyone know of any benchmarking software or programs like 3DMark that can run on these Intel iMacs?

xbench 1.2 is supposely universal binary, but I don't think it is really optimized yet to accurately measure the speed of the intel iMacs.
Glor

Problem Reading DL DVDs (DVD-R DL) on Intel Core Duo

I have a problem when trying to read a burned DVD-R DL. The system just ejects the DVD after about 20-25 seconds of trying to read it. The same thing happens when I put in a blank DL DVD. The format is DVD-R DL, which I believe this iMac should be able to read/write.
Any advice? - Thanks.
iMac 2 GHz Intel Core Duo
MATSHITA DVD-R UJ-846:
Firmware Revision: FB2U
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
iMac 2.0 GHz Intel Core Duo Mac OS X (10.4.8)

I have a problem when trying to read a burned DVD-R
DL. The system just ejects the DVD after about 20-25
seconds of trying to read it. The same thing happens
when I put in a blank DL DVD. The format is DVD-R
DL, which I believe this iMac should be able to
read/write.
Any advice? - Thanks.
iMac 2 GHz Intel Core Duo
MATSHITA DVD-R UJ-846:
Firmware Revision: FB2U
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
iMac 2.0 GHz
Intel Core Duo Mac OS X (10.4.8)
If you look your profile tells you that Matshita works with +R DLs.
20"iMac, 2.16 GHz Intel Core 2 Duo, 2GB Ram, 250GB Hard Drive Mac OS X (10.4.8)

G4 iMac migrates to Intel Core Duo

I just migrated the contents of my 17” G4 iMac to a 20” Core Duo. The only piece of software that wouldn’t run on the new Mac was Nikon Capture 4.4.1; upon launching, it told me that it was missing necessary files. I reloaded the software from my original 4.0 discs. This time the error message said to click to go to PACE and run the installer, which I did. The installer claimed to run successfully, but NC4 still claimed to be missing files. At this point I went to the NikonUSA website and downloaded the NC4.2 updater. After running this and rebooting, NC4 ran just fine. I finally updated it back to V4.4.1, which also works properly.
Rosetta notwithstanding, compared to running NC4 on the G4, it’s much faster. Opening a D200 RAW file on the Core Duo is about as fast as opening a D2h file on the G4--not instantaneous, but reasonable at around 7 seconds. Same goes for edit files.
With 2 gigs of RAM on the Core Duo, NC doesn’t suck up all the memory, as it did on the 1 gig G4. No “page outs” when working on several RAW files at a time. This is much better performance than I had been expecting from it.
PSE3 work reasonably well, too. Faster than on the G4, at least.
While I was trying to get NC4 to work again, I did play around with iPhoto6. It seems very fast and has some interesting features, so I’ll probably start using it too.
All the included iLife6 programs seem to work well, and much faster than on the G4.
I had no problems with any peripherals except a very old USB CameraMate Compact Flash card reader, for which the OS X driver appears to no longer function. A no-name card reader I got for free from OMax works fine, though. So does my Epson 1650 flatbed ( I use PSE3 to access it), a QPS external firewire drive and an Epson 1270 printer. No problems with Wi-Fi or ethernet,either. When I plugged the ethernet cable fron the Core Duo into my Airport Extreme base, the computer automatically switched its settings from Airport to ethernet--neat!
This is the seventh Mac I’ve owned and the easiest migration so far. The improvements in performance and in the quality of the display greatly exceed my expectations.
Danny W.
20" iMac Intel Core Duo Mac OS X (10.4.6)

I just migrated the contents of my 17” G4 iMac to a 20” Core Duo. The only piece of software that wouldn’t run on the new Mac was Nikon Capture 4.4.1; upon launching, it told me that it was missing necessary files. I reloaded the software from my original 4.0 discs. This time the error message said to click to go to PACE and run the installer, which I did. The installer claimed to run successfully, but NC4 still claimed to be missing files. At this point I went to the NikonUSA website and downloaded the NC4.2 updater. After running this and rebooting, NC4 ran just fine. I finally updated it back to V4.4.1, which also works properly.
Rosetta notwithstanding, compared to running NC4 on the G4, it’s much faster. Opening a D200 RAW file on the Core Duo is about as fast as opening a D2h file on the G4--not instantaneous, but reasonable at around 7 seconds. Same goes for edit files.
With 2 gigs of RAM on the Core Duo, NC doesn’t suck up all the memory, as it did on the 1 gig G4. No “page outs” when working on several RAW files at a time. This is much better performance than I had been expecting from it.
PSE3 work reasonably well, too. Faster than on the G4, at least.
While I was trying to get NC4 to work again, I did play around with iPhoto6. It seems very fast and has some interesting features, so I’ll probably start using it too.
All the included iLife6 programs seem to work well, and much faster than on the G4.
I had no problems with any peripherals except a very old USB CameraMate Compact Flash card reader, for which the OS X driver appears to no longer function. A no-name card reader I got for free from OMax works fine, though. So does my Epson 1650 flatbed ( I use PSE3 to access it), a QPS external firewire drive and an Epson 1270 printer. No problems with Wi-Fi or ethernet,either. When I plugged the ethernet cable fron the Core Duo into my Airport Extreme base, the computer automatically switched its settings from Airport to ethernet--neat!
This is the seventh Mac I’ve owned and the easiest migration so far. The improvements in performance and in the quality of the display greatly exceed my expectations.
Danny W.
20" iMac Intel Core Duo Mac OS X (10.4.6)

The fn key and movement keys on a MacBookPro 2 GHz Intel Core Duo

This is my first notebook computer so it may be obvious, but I cannot figure out how to use the fn key in combination with movement keys. While the fn home (right arrow) and end keys work, if you add any other command keys, like ctrl, shift, option, cmd the fn key seems not to function. For example shift-home (fn-left arrow-shift) which should extend the selection to the beginning of the line just functions as shift-left arrow. When I attach an external keyboard everything works as it should.
Actually, having played with things a bit just now, things seem to work oddly. If I hit shift (and hold it) then fn (and hold) and then left arrow, things work as they should, but if I hit fn (and hold) then shift (and hold) and then left arrow, it reacts as though I hit shift and left arrow only.
Is this normal (if it is it is strange to me)?
MacBookPro 2 GHz Intel Core Duo Mac OS X (10.4.6)

my guess is a bug in the keyboard driver, maybe if
you report it to apple they will fix it, it looks
just like something that was overlooked during testing
That sounds like a good idea, but how does one report bugs to apple? There is nothing on the site that makes it obvious.
MacBookPro 2 GHz Intel Core Duo Mac OS X (10.4.6)

Quark 6.5 crashes when opening existing files on iMac Intel Core Duo

I just switched from a G4 titanium laptop to an Intel iMac and Quark works fine except when I try to open a file that I created on the laptop (same Quark 6.5). It crashes. I talked to Quark and they said that I need to open the files on a PC and resave (I don't have a PC or a friend with a PC and Quark not that I'd send them all my files even if I did). I've tried resaving and renaming files with no luck. I tried reinstalling both the operating system and Quark (both 6 and 6.5) with no luck. Has anybody else had this problem and found a work around? I want to sell my laptop but I can't until I know I can access the hundreds of client files I have there.
iMac Intel Core Duo Mac OS X (10.4.6)

Sorry I have no real experience with this, just a thought. Did you use migration assistant to move the old files over from your G4 to your Intel? And did you then perform a "Repair Disk Permissions" upon the entire hard drive from within Disk Utility's "First Aid" panel? (located at Applications>Utilities>Disk Utility)
If the file move still is causing you a problem afterwards, you could try and work around it by moving the files in a different way. As a test, create a small file on the G4 and then email it to yourself from the G4. Receive that message into the Intel and see if the Intel can then open the file from inside Mail. This might avoid any "bias" created during the move from old to new Mac.

Dualdisc cd side won't play on my mac mini intel core duo w Superdrive

Shakira Fijacion Oral DualDisc "CD" side will insert and then automatically reject from my Mac Mini - Intel Core Duo. The DVD side plays fine. Unfortunately iTunes not smart enough to work with DVD side. There is a query in IPOD forum about Springsteen DualDisc also failing on intel mini mac that is listed at "answered" but for the life of me, I can't tell if you are supposed to just not buy DualDisc or else take the Mac Mini back for a new drive.
mac mini (intel core duo) Mac OS X (10.4.7) 2GB RAM

Mac Mini Intel Core Duo's did not ship until 2006 which seems plenty of time for Apple to announce 'we have a problem' and what their recommended solution.
Why would they do that ? I mean, they don't have a problem. The inventors of DualDisc made a type of disc that won't play in all players, and Apple can't really do anything about it. Superdrives are not made by Apple, it's just Apple's name for a DVD burner; the Superdrives that are found in various Macs come from several different manufacturers, and although Apple probably ensures that the Superdrive and the Mac work well together, they won't test whether it works with each type of disc (usually, the manufacturer will).
However, that is probably limited to redbook/standards-compliant discs; since a DualDisc's CD side doesn't comply with any standard other than "DualDisc", and because it is not considered important enough to be officially supported by most (if not all) manufacturers, they probably won't test them since they're bound to get mixed results anyway.
Similarly I don't remember seeing a "strictly redbook only" disclaimer on any of the media available from Apple describing the capabilities of its Superdrive when I was making my mac mini buying decision.
You didn't see one because it is not required. Asking that Apple (or any other company) warns you that their players won't play non-redbook CDs is a bit like asking that they tell you everything your optical drive won't play. Apple claims that their Superdrives will read CD-R/RW, DVD-R/RW, DVD+R/RW, DVD-R DL, which aren't only a bunch of weird-looking letters, but also correspond to a standard. When you see a CD logo on a drive, it means that it will play redbook-compliant CDs. Your Dell player simply does more that what it is supposedly capable of, but because one (or many) optical drives will play DualDisc doesn't mean that they all have to.

Airport sleep/wake problems on iMac Intel Core Duo

I have seen several posts with similar issues but I haven't found an answer yet that has worked for me consistently so I am going to restate the question. I have a 20" new iMac CoreDuo with 1Gb RAM and of course an Airport extreme wireless card. When the computer goes to sleep, first of all it often takes a very long time for it to come awake (on the order of 30 seconds - or more), then when it comes back the wireless connection is 1) either completely missing, in other words, the hardware can't even be found in system information or 2) the airport is detected, radio is on, but it can not find any networks to connect to. The only thing I have found to fix this issue is to do a hard reboot. I have done an archive and install, and have also deleted the system configuration folder multiple times. I have been on the phonw with Apple tech support and they have not helped beyond those two suggestions and the only reason they suggested them was because I forwarded them the posts on these forums that recommended them. Can anyone please suggest a fix for this issue? Assuming, of course, that it is not a case of a bad piece of hardware/firmware in which case I just have to wait for a new driver or take it in to the "shop".
iMac 20" Intel Core Duo Mac OS X (10.4.4) 1Gb RAM

I have the exact same configuration and I haven't had this problem. I have noticed that the signal has no bars when waking from sleep, but then after a couple of seconds it automatically reconnects. Maybe it IS bad hardware. Have you isntalled any software that is network related (including widgets, drivers etc...) or do you have any drivers loaded... wireless printer driver, etc...
My profiler looks like this (sorry it's in italian but you could still compare the info)...look at the firmware, maybe it's different.
Dati scheda AirPort:
Tipo di scheda wireless: AirPort Extreme (0x14E4, 0x89)
Impostazioni internazionali scheda wireless: Universale
Versione firmware scheda wireless: 100.9 (3.120.28.3)
Network wireless attuale: Wireless and Free
Canale wireless: 3
As a last resort, you could completely wipe the computer clean and reinstall the OS. This would eliminate the possibility of any 3rd party stuff interfering.

Using new battery on old 2.16 GHz Intel Core Duo

I am in a remote location, under a deadling. My 2.16 GHz Intel Core Duo MacBook Pro battery cable finally went south. I'm in a studio with half a dozen brand new battery units ... for 2.66 GHz Intel Core i7 MacBook Pro's.
Can I use the battery from a 2.66 GHz Intel Core i7 MacBook Pro on my older 2.16 GHz Intel Core Duo???
All ears,
Ben

As I wrote above, there is no possibility of using one of the new batteries in your old machine: it absolutely won't fit. Furthermore, removing the battery from one of the new machines will void the warranty on that machine, so even if you could contrive a wiring harness to connect one of the new batteries externally to your MBP, there would be good reason not to do it.
And if you did, there is no way to predict how the charging system in your machine would respond to the incorrect battery. Would it be charged at all? Would it be charged only to the capacity of the battery specified for use in your computer, which is far lower than the capacity of the new battery? Would the SMC in your machine recognize the battery and distribute the power from it correctly? The answers to these and many other related questions are anybody's guess.
So the solution to your immediate problem will be to move your work onto one of the newer computers, finish it up by the deadline, and order a new battery for your own computer.

CD drive not reading Audio or Photos intel core 2 duo Mac - says there is nothing on disc / Blank - Is there a fix ??

Similar Messages

Maybe you are looking for