CD Drive not Showing up HELP! HELP!

I just inserted a regular blank CD-R and it did not appear on my desk top, so tried to eject it and nothing happened, then the icon that shows up when you hit eject stopped showing up as well, so i went in the firmware screen and typed in eject CD (this is after re starting and holding down the mouse, i couldn't find the button with the paper clip) and it tells me that "cant open Eject Device". So now what can i do? Can anyone please help, or do i have to take it in for service?
I am working on a Imac with a Super drive.

FYI, this area is for discussing iMac G4s. Since you have an iMac G5, you probably want to visit the iMac > iMac G5 > DVD - CD-RW - CD discussion area so that other users of the iMac G5 can see your question.

Similar Messages

Newly installed Ultra ATA hard drive not showing up anywhere-HELP!

Just installed (I thought) a 300 GB hard drive on top of my factory installed 40GB. Tried it once as the master and then as the slave. Still, it doesn't show up in disk utility so I can format it. I do not have it set for cable select.
Any help would be appreciated because I couldn't find a similar question in the past posts. Thank you!! ")

I thought it was a Sony but apparently only my CD drive is - I can't tell if it is a WD! Here's are the specs on it... Does that model # tell you anything about it?
ST340016A:
Capacity: 38.18 GB
Model: ST340016A
Revision: 5.21
Serial Number: 3HS5SPFX
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
Also, the instructions I have don't tell me how to set up the old HD as master w/slave present. Currently, I have no jumper in the new HD and the old HD has a jumper in the master/single drive spot.
The instructions are more geared to a Windows PC of course. In the troubleshooting section is does talk about having to put a (capacity limiting) jumper on the pins all the way to the right for computers that do not suport high-capacity drives.
Now that I've had some sleep I'm going to get back down there and see if I can't refigure my connector situation.
BTW-yes, I figured out too late that I would not be able to use all of the GB on this drive. This is a learning process for me as I'm a busy mom of 3 boys-I generally figure things out in my "spare" time. Ha, ha! I so love .Mac and the support-what a lifesaver!
I HAD been wondering how difficult it would be to install the controller card. Is that something I can do down the road assuming I actually get my new HD showing up?
Thanks!

Cell background colors are not showing in preview - help? - DW4

Hi,
I created a horizontal table for my menu bar, and gave each cell a different color by creating a separate class for each with background image - image is a block of color created in Photoshop. In design mode they look they way I want, but in preview (Safari) the colors don't show up at all - the whole area is gray, and all I see is the text for each cell. Can someone tell me what I'm doing wrong? Alternatively, is there a better way I can set this up to have different colors for each button?
Thank you!

Here is the HTML code, and the CSS code for the menu bar follows:
     ul.MenuBarHorizontal
></style><style type="text/css"><!body {     background-color: #FFF;     font-family: Arial, Helvetica, sans-serif;}-->
    h1.
     ul.MenuBarVertical
[about | MS_about.html]
[fiction | MS_fiction.html]
[dramatic work | MS_dramaticwork.html]
[arts | MS_arts.html]
[contact | MS_contact.html]
[blog | MS_blog.html]
</div></html>
CSS CODE:
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* The outermost container of the Menu Bar, an auto width box with no margin or padding /ul.MenuBarHorizontal/ Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html /ul.MenuBarActive{     z-index: 1000;     font-family: Arial, Helvetica, sans-serif;     font-size: medium;     color: #FFF;     background-color: #FFCC99;     background-repeat: no-repeat;     left: auto;     top: auto;     right: auto;     bottom: auto;}/ Menu item containers, position children relative to this container and are a fixed width /ul.MenuBarHorizontal li/ Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) /ul.MenuBarHorizontal ul/ Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item /ul.MenuBarHorizontal ul.MenuBarSubmenuVisible/ Menu item containers are same fixed width as parent /ul.MenuBarHorizontal ul li/ Submenus should appear slightly overlapping to the right (95%) and up (-5%) /ul.MenuBarHorizontal ul ul/ Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
/* Submenu containers have borders on all sides /ul.MenuBarHorizontal ul/ Menu items are a light gray block with padding and no text decoration /ul.MenuBarHorizontal a/ Menu items that have mouse over or focus have a blue background and white text /ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus{     background-color: #6C9;     color: #999;     font-family: Arial, Helvetica, sans-serif;     font-size: medium;     font-style: normal;     line-height: normal;     font-weight: normal;     font-variant: normal;     text-decoration: none;     text-align: center;     vertical-align: middle;     height: 50px;     width: 115px;}/ Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible{     background-color: #FFCC99;     color: #FFF;     font-family: Arial, Helvetica, sans-serif;     text-decoration: none;     font-size: medium;}
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) /ul.MenuBarHorizontal a.MenuBarItemSubmenu{     background-image: url(SpryMenuBarDown.gif);     background-repeat: no-repeat;     background-position: 95% 50%;     text-align: center;}/ Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) /ul.MenuBarHorizontal ul a.MenuBarItemSubmenu{     background-image: url(SpryMenuBarRight.gif);     background-repeat: no-repeat;     background-position: 95% 50%;}/ Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) /ul.MenuBarHorizontal a.MenuBarItemSubmenuHover{     background-image: url(SpryMenuBarDownHover.gif);     background-repeat: no-repeat;     background-position: 95% 50%;}/ Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover{     background-image: url(SpryMenuBarRightHover.gif);     background-repeat: no-repeat;     background-position: 95% 50%;}
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe /ul.MenuBarHorizontal iframe/ HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */@media screen, projection{     ul.MenuBarHorizontal li.MenuBarItemIE     {          display: inline;          f\loat: left;          background: #FFF;
Date: Mon, 20 Jun 2011 15:30:46 -0600
From: [email protected]
To: [email protected]
Subject: Re: cell background colors are not showing in preview - help? - DW4
NEED to see the code.
Otherwise it's like dialing a random phone number, and asking whoever answers, where you left your keys.
>

HT4623 hi. i had erased iphone. now its not showing in itunes. help how restore?.

hi. i had erased iphone. now its not showing in itunes. help how restore?.

thanks feffo87.
but i hav used ERASE ALL CONTENT AND SETTINGS to erase, but my iphone 4s is not reading on itunes.
how to restore new ios now.

My external hard drive not showing up

Hello,
My external hard drive is not showing up on my desktop. I went to finder & preferences>general and made sure I checked "show these items" and checked hard drives. I even unchecked it because I have 2 other external hard drives. When I checked the hard drive box the other 2 hard drives appeared but the third hard drive did not. The hard drive not showing up on my desk top does show up when I double click my system hard drive & can be opened from there, but I want to see it on my desk top. Any help would be appreciated.
Thanks

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen /V* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Bootcamp drive not showing up in Lion

hi! ^^
Bootcamp drive not showing up in Lion.
Lion is just downgrade version of Leopard.
nothing changed but good functions are disappear.
c:/aaa folder? i can not access directly from os x boot.
haha.

Click Start, then click All Programs.
Click Accessories, and then click Run.
Type regedit, and then click OK.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
MAKE BACKUP OF REGISTRY
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.

Drive Not Showing In Startup Disk

I have re setup my MacBook Pro, all seems well apart from this little problem. My Mac OS X Partition or Windows Partition shows in startup Disk.
Both Operating Systems do startup fine though.
I have my disk partitioned like this
Free Space
Windows 7
Mac OS X
Its setup in this way so i can use TrueCypt for the Windows side.
Does anyone know how to correct this please?
You can use this link to view a screenshot
http://www.edugeek.net/attachments/forums/mac/9912d1302462528-drive-not-showing- startup-disk-screen-shot-2011-04-10-20.07.19.png
Thanks

if you try to verify the disk, dose it report any errors? (open disk utility, click on the Macintosh HD, click on the repair tab, click verify disk.)
If you option boot, dose the computer list both Boot Volumes?
Have you tried blessing the mac hard drive?
ie: "sudo bless -folder /Volumes/Macintosh\ HD/System/Library/CoreServices -bootinfo"
(note the above bless command blesses the Hard Drive with the name "Macintosh HD", if you mac volume has a different name, change to match your hard drive's name.)

USB External drive not showing in Finder, or on Desktop

I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
The first one shows everywhere, on the desktop, in finder and in Disk Utility.
The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
Any suggestions.

Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.

Why is my External Hard Drive not showing in Aperture 3.6 Import?

Why is my External Hard Drive not showing in Aperture 3.6 Import?
Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.

Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.
I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

Western Digital drive not showing up in disk utility--Help please.

Hello all. This is my first post. I am having trouble with my WD 500GB external hard drive. It is not showing up in disk utility when connected either via the firewire or USB ports. I purchased the drive about 8months ago, brought it home and set it up as my Time Machine backup drive. It worked great for several months, until it got full. Then it stopped showing up on the desktop for no apparent reason. I discovered through reading support documents on the Apple web site that when I set the drive up initially I should have changed the partitioning protocol from master boot record to GUID, but I did not. I followed the apple web site instructions for making the change expos facto, but was instructed to press buttons that were "grayed out". As such, I couldn't do it. Perhaps foolishly, I thought that I would just start all over by reinitializing it, formatting it correctly (with my new found knowledge) and then do the time machine backup fresh. However, the drive no longer shows up in disk utility no matter how or in what order I connect it. When the drive is connected by firewire there is evidence of some recognition of the drive in system profiler, but it is listed as "External HDD Buttons and Lights". There is also evidence of the My Book showing up at a minimal level (eg. the firmware revision and a few other details are listed). On the front of the drive is a ring of blue lights that progress in a clockwise direction as soon as a connection is made via either firewire or USB. Before that it is solid blue. I have read through all the info that I can find on this site, and all the suggestions require the drive being recognized in disk utility. Without that, I am stuck. I know this must be a solvable problem, because the drive just a bucket of parts before it was manufactured. I just don't know enough to solve the problem or even know what qeustion to ask. I would really appreciate some help. Thanks in advance, and sorry for the long post.

If you can't boot from an OSX DVD, it sounds bad. Yet I think you said you were running Disk Utility from the DVD?
I got an external Firewire drive enclosure for 2.5 inch IDE drives from Other World Computing (OWC)
http://eshop.macsales.com/item/Other%20World%20Computing/MOTGFW400/ but similar items are available from many vendors like Newegg. About $60 for the basic model. More money can buy additional interfaces on the enclosure like FW800 and USB2; an AC adapter instead of letting the firewire bus power the drive (usually OK).

HELP! Macbook pro external hard drive not showing up

Hello I really need help and I've already read through all the relevant threads non of them helped.
Here's my problem. And please read all of it cause its frustratingly weird.
I have a few external drives. Suddenly, with out me changing or downloading anything, my Macbook Pro isn't recognizing ANY of them through the USB ports. The USB ports are not dead. The drives DO show up through the firewire port. But through the USB my Mac doesn't recognize them at all, not through Terminal, DiskUtility, Activitly Monitor, or in Safe Mode. The USB port DO recognize my IPHONE, IPOD and wireless mouse with no problem.
My first thought was that my External drive(Noir) is dead because my other drive (Trick) was still showing up and useable but Trick is connected through my firewire and when I plugged in 'Boolio' through the USB it did not show up either, they are also not registering Thumb drives.
I'm at the end of what I know how to do. I've been reading and researching for almost 2 weeks now and it seems that everyone has similar but not the same problem, I really need help please!!!!
I've got Mavericks 10.9.5 (& theres no way I'm doing Yosemite)

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPhoto is not showing photos that i have saved on an external drive. I can see tht the photos are on the drive, but iPhoto is not showing them. Help!!

Iphoto is not showing the photos that I know are stored on the external drive. I can see that there is 45 Gig of photos stored on the drive as they appear in finder when looked for, but I cannot see them in iPhoto.
I have used the external drive as the default location for my iPhoto library and not had this problem before.
I had a message earlier about generating thumbnails. I also had iMovie running this morning. This is when the problem began.
Have tried restarting computer and all the obvious things.
Also tried rebuilding the library.
Please help!

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

HELP! DVD Drive not showing on finder or desktop

Hi, I am not a Mc OS expert. I have a Mac Pro 1,1 with MAC OSX 10.7.5, and my original DVD drive died. I happened to have an HP Lightscribe DVD640, and I installed it, but, its icon does not show up!
It is recognized by the system and Disk Utility, and if I insert a CD or DVD it reads it correctly, but when I remove it, there's no icon of the actual drive anywhere, so, I won't be able to open the drive to insert a new disc...
I set the Finder preferences to show CDs and DVDs, but nothing shows...
Any suggestion?

but... this is a Mac Pro, it does not have a slot-in, how do I even open the drive? I was able to see the DVD drive icon before, and select "OPEN" and the tray would open, now, I don't se anything.

External USB Hard Drive not recognized on iMac HELP!!

I am currently using a i5 iMac running Lion 10.7.5
I have recently partitioned a Verbatim USB external hard drive and uploaded all my footage from a wedding. This was done with no problems and the QT videos could be opened from the hard drive.
A few weeks later, the hard drive does not show up in my finder. BUT it is recognized in disk utility. Here is a screen shot;
So first I ran "Verify" and it told me to repair disk. After clicking on Repair, I got this;
It is giving me the error message "Invalid B-Tree node"
Here is more info on the hard drive;
Name : Hitachi HTS545032B9A300 Media
          Type :           Disk
          Partition Map Scheme :           Master Boot Record
          Disk Identifier :           disk1
          Media Name :           Hitachi HTS545032B9A300 Media
          Media Type :           Generic
          Connection Bus :           USB
          USB Serial Number :           091004B3066D
          Device Tree :           IODeviceTree:/PCI0@0/EHC2@1A,7
          Writable :           Yes
          Ejectable :           Yes
          Location :           External
          Total Capacity :           320.07 GB (320,072,933,376 Bytes)
          Disk Number :           1
          Partition Number :           0
          S.M.A.R.T. Status :           Not Supported
Can someone give me a step by step on how to get the hard drive working again? It would mean the world to me as this footage is priceless and irreplaceable.
OR can you refer me to someone (Geek Squad? Apple Store?) that might be able to help me out?
Thanks in advance!

The error message invalid b-tree node size indicates that the directory on the disk is corrupt. The way that it can be repaired is to reformat as disk utiltiy says.
It is recommended that the data be backed up first before either of this solution are done.
Since it is not be recognized by the sytem at all it does sound like you can back it up now.
Do you have a backup?
If you don't there is every chance you may lose all your data.
You can check to see if a data recovery service can recover any data for you. If you go that route you are looking at spending $$$$
Allan

Picture not showing online pls help

Hello I am a basic Dremweaver user. I am trying to add a picture to my webpage but online when I check the images space flashes but does not show the image. It is correctly loaded on the server and local and linked cprrectly SRC. Can anybody help please?
Thanks
Bocz2001

I use the design layout and just drage the scr to the folder of the image. Then I check the remote folder to make sure the image is uploaded to the server. I know the images id there because when the other images are loading online, if I scroll to the end I will see the box clearly and without image. But when the previous images are loaded and it comes down to the new image (empty box) that box then dissapears and no image is leaded.
Thanks

Error msg. 1327 Drive not found REALLY NEED HELP

Hello,
I recently installed iTunes and ever since then whenever I try to install new software from a website I.E. Adobe.com "Reader" I get an error message saying F:\ drive not found, which there is not F:\ drive.
I have gone to administrative tools but have only found C:\ drive. Now, when I go to "Run" in the Start menu I see in the browse menu "F:\iTunes.exe and iTunesHelper.exe
My iTunes does work properly but on start-up do get an msg. saying it was not installed proberly and to re-install.
I do not want to re-install iTunes for fear I will get the same msg. and not be able to complete install.
Really need help on this because I need to install Acrobat Reader for work.
Thanks
Mark
[email protected]

Doublechecking something.
Could you confirm for us both that error message number and message?
Checking, because the 1327 error message number usually comes with an "invalid drive" message rather than a "drive not found" message.

CD Drive not Showing up HELP! HELP!

Similar Messages

Maybe you are looking for