Cd drive not spinning

Envy m7-j020dx, e4s19ua cd drive:cddvdw-su-208cb scsi
Drive does not spin when a disk in inserted.
Drive shows up in my computer, explorer, etc.
Possible fix?
Where to buy replacement drive?
Thanks
Gene

Please click on the below shown link to troubleshoot this issue
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03280768&tmp_task=solveCategory&cc=us&dlc=en&lc...
You can Check your warranty Here to verify the status and Click Here to order a replacement part
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Similar Messages

External hard drive not spinning up

Hi,
I have a 160GB Freecom FHD-3 external hard drive connected to my iBook with USB 2.0 that I use to store all my music / movies etc. I have a slight problem with this drive and i was wondering if anyone could help me.
Firstly when i turn the iBook on with the drive connected it takes a long time (>3 mins) to boot up. Secondly if the drive is connected and i put the iBook to sleep, the drive spins down and automatically powers off. When i wake the iBook the external drive does not spin up and my iBook freezes with the spinning pizza of death as it is desparately searching for the external HD with my iTunes music folder in.
I did not have this problem with my Mac Mini and i was wondering if there was anything i could do to sort it out.
Cheers

dickonhowell, Welcome to the discussion area!
I am guessing that the Mac mini keeps the USB ports powered even when sleeping. I would bet that the iBook turns off the USB ports when sleeping. That is probably why you experience different things with the 2 different Macs.

Cdrw/dvd drive not spinning

I got a 655 max motherboard and I have a lot of trouble getting my cds to spin. The drives are both from MSI. Sometimes the cds will spin in the dvd drive but a lot of the time they wont spin at all. In my cdrw drive it sounds like its going to spin but it never does,it has never worked since i got this motherboard and cdrw drive. Im pretty sure both drives are hooked up properly because they both appear in the bios and in windows.
Can somebody help me with this before I send back my computer.

Not an infrequent problem...
https://discussions.apple.com/thread/4179391?tstart=0

Imac won't start. hard drive not spinning?

Ok. I push the power button and my imac gets to the gray apple startup screen and then the hard drive spins down. The hard drive trys and trys to go, but just keeps spinning down. I have no idea what to do.

Hi,
Welcome to Apple Discussions.
It sounds like your Hard Drive may have failed (which is to be expected for any iMac G3 with original drive still installed - given their age).
HD often start making funny noises as a warning before failing though.
To confirm this I suggest that you get the original software install/restore CD that came with your iMac. Insert that shortly after start-up and hold down the 'C' key on your keyboard to boot from the CD. If the iMac boots fine but Macintosh HD is no longer visible on the desktop you need to investigate the HD. Post back with your findings!
good luck!
mrtotes

Hard Drive is not spinning up making rhythmic click sounds

Hello,
My Hard Drive is not spinning up and making rhythmic click sounds. I charged it completely. Tried to reset it but this results only in the Folder-Icon with a support link. It can not be connected to my computer anymore via USB. It is not recognized as a external disk anymore. I tried the disk mode too. nothing helps.
As I can't connect it to my computer anymore I can't reformat it.
Any ideas besides throwing it away...?
Thanks, Juergen
4G Click Wheel 40 Gig Windows 2000

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Lenovo G770 Fan not spinning up after resume from sleep or hibernate

Hi guys,
My lenovo G770 is facing an issue where when ever I resume the system from either sleep mode or hibernate, the fan does not spin up, as a result I have to either restart the system or open the system, pull the wire of the fan and put it back in the power socket.
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!
Solved!
Go to Solution.

Hey Abdul,
Welcome back. If the fan runs normally on first boot until you suspend / resume, then I might imagine this is power management quirk, or something confused in the embedded controller.
1) Try going into BIOS and reload defaults - this might refresh values there.
2) Try uninstall / reinstall power management driver and the energy cut software (Idea power manager).
Did you recently update BIOS or drivers?
I would also try some temp monitoring software just to see how CPU temps run after you come back from sleep to see if the fan should be running.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Hard Drives Not Mounting - Help!

Hello,
This is my first post, so please forgive me if I leave anything out....
I recently had to replace my hard drive. Got it all going, then I noticed when I went to put a music CD in, that it would not show up. I tried others with no luck....then I put in a cd with data, and it showed up on the desktop....
While trying to mess around, I made my 2 LaCie external hard drives go away! I have tried checking cables, and they come on when the computer does, they don't show up in system profiler....
Please let me know what information you might need to help me diagnose these problems....my computer has been so good to me, I want it back up and running...
Powerbook G4 Ti 667 MHz Mac OS X (10.3.9) 512 Ram

Hi, mcholley, and welcome to Apple Discussions.
I can't suggest any remedy for your optical drive not reading audio CDs but having no trouble with data CDs, except to say it's apparently a software problem, not hardware-based.
After replacing your hard drive, did you reinstall your operating system from scratch on it, or did you restore your OS from a backup you had made?
The disappearance of your external drives (are they USB or FireWire?) may be power-related. Are they externally powered, or are you powering them from the USB or FireWire bus? If they're bus-powered, are you connecting both of them at once? That won't work: together they demand more power from the bus than it can supply, and while they may spin, they won't mount. Connect only one of them at a time. Is either of them detected by Apple System Profiler when just one is connected to the Powerbook? Does it mount on the desktop then?
If you've been able to connect both drives to the Powerbook at the same time in the past, and both have mounted OK, then there's been some hardware change recently, other than your hard drive replacement, that has caused the loss of external drive detection. Is it possible that during your recent operations you've turned off one or both of the external drives, or disconnected it/them from the Powerbook, without dismounting it from the desktop first? Depending on what, if anything, the drive was doing at the time, that can make a FireWire drive unmountable and all the data on it inaccessible. In that case it may be necessary to erase and reformat the drive. I don't know whether the same is true of USB drives.
Do you have another Mac to which you can connect the drives, to see whether they show up on it? If they do, you might have to consider the possibility that the port(s) to which you've been connecting them on your Powerbook is bad.

Hard drive constantly spinning up and down when asleep

Hi all,
I have a problem with an external USB 2.0 hard drive connected to my Mac mini (late 2012).
When I put the computer to sleep the drive spins up to speed, stops, then immediately starts to spin up again. This goes on and on.
I understand that drives will periodically spin up when asleep for spotlight indexing etc. However this seems like strange behaviour, it just repeats spinning up and down in an endless cycle.
I have had the drive for a while now, as my time machine backup. Interestingly this problem only started after I rearranged my desk when I set up a second monitor. I have a USB 3.0 drive (my scratch disk) that behaves normally.
I have drives set to not sleep in preferences.
I have searched around but can only find posts about people not wanting to wait for drives to spin up when they open finder etc.
What do you think? Could the drive be on its way out? It is a Samsung spinpoint f3 1tb in an Iomega enclosure, for information...
I appreciate any help,
Cheers,
Mike

Hi BDAqua,
I should have noticed this earlier but it appears the problem is with the mini waking from sleep and thus causing the drives to wake.
When I put the mini top sleep (without the external drives powered on) it constantly wakes and sleeps. The displays dont come back on (untiul you click the mouse or hit a key etc.) but you can hear the internal drive spin up and the sleep light comes on, then goes back to blinking until it wakes again.
I have realised that it must be due to the second monitor that I have connected via the mini display port. It is connected using a mini display port to hdmi cable I bought from play.com. Something to do with the display and thunderbolt is casuing the sleep function to misbehave, I think.
Here is the console log that was created after sleeping the mini, allowing it to go through its weird sleep/wake cycle then fully waking it up again.
Hope that makes sense, it is late and I am tired!
Thanks for all your help.
Mike
21/05/2013 23:30:16.840 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
21/05/2013 23:30:16.000 kernel[0]: HID tickle 43809 ms
21/05/2013 23:30:18.747 WindowServer[93]: Created shield window 0xc1 for display 0x003f003f
21/05/2013 23:30:18.747 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:18.752 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:18.766 WindowServer[93]: Created shield window 0xc2 for display 0x003f003d
21/05/2013 23:30:18.766 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:18.784 airportd[1018]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:30:19.169 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:30:19.206 loginwindow[42]: resume called when there was already a timer
21/05/2013 23:30:19.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:30:58.348 com.apple.backupd-helper[1028]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.
21/05/2013 23:31:02.141 WindowServer[93]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
21/05/2013 23:31:02.142 loginwindow[42]: CGSGetWindowTags: Invalid window 0xffffffff
21/05/2013 23:31:02.142 loginwindow[42]: find_shared_window: WID -1
21/05/2013 23:31:02.142 loginwindow[42]: CGSSetWindowTags: Invalid window 0xffffffff
21/05/2013 23:31:02.307 WindowServer[93]: Created shield window 0xc8 for display 0x78c8d2fe
21/05/2013 23:31:02.311 WindowServer[93]: Created shield window 0xc9 for display 0x78c8d1b0
21/05/2013 23:31:02.311 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
21/05/2013 23:31:02.352 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:02.352 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e5906240> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:02.370 WindowServer[93]: device_generate_desktop_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
21/05/2013 23:31:02.389 WindowServer[93]: device_generate_lock_screen_screenshot: authw 0x7fd5b9025b30(2000), shield 0x7fd5b3105bb0(2001)
21/05/2013 23:31:02.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
21/05/2013 23:31:04.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:04.000 kernel[0]: LE is supported - Disable LE meta event
21/05/2013 23:31:04.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
21/05/2013 23:31:04.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
21/05/2013 23:31:04.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:04.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
21/05/2013 23:31:04.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
21/05/2013 23:31:10.000 kernel[0]: TBT W (2): 0x0010 [√]
21/05/2013 23:31:10.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
21/05/2013 23:31:10.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
21/05/2013 23:31:10.000 kernel[0]: Previous Sleep Cause: 5
21/05/2013 23:31:10.000 kernel[0]: en1: 802.11d country code set to 'X3'.
21/05/2013 23:31:10.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
21/05/2013 23:31:10.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:10.965 configd[18]: network changed: v4(en0-:192.168.1.190, en1-:192.168.1.47) DNS- Proxy- SMB
21/05/2013 23:31:11.549 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:11.632 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:11.000 kernel[0]: en1: 802.11d country code set to 'US'.
21/05/2013 23:31:11.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
21/05/2013 23:31:11.000 kernel[0]: MacAuthEvent en1   Auth result for: 10:bf:48:3e:02:74 MAC AUTH succeeded
21/05/2013 23:31:11.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
21/05/2013 23:31:11.000 kernel[0]: AirPort: Link Up on en1
21/05/2013 23:31:11.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:11.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:12.000 kernel[0]: en1: 802.11d country code set to 'GB'.
21/05/2013 23:31:12.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
21/05/2013 23:31:12.000 kernel[0]: Graphics suppressed 2116 ms
21/05/2013 23:31:12.000 kernel[0]: AirPort: RSN handshake complete on en1
21/05/2013 23:31:12.454 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
21/05/2013 23:31:12.466 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
21/05/2013 23:31:12.470 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
21/05/2013 23:31:12.895 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:12.915 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:13.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
21/05/2013 23:31:14.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,c5e1,3800]
21/05/2013 23:31:14.757 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
21/05/2013 23:31:14.776 mDNSResponder[39]: 78: Could not write data to clientPID[-1]() because of error - aborting connection
21/05/2013 23:31:14.779 mDNSResponder[39]: 78: DNSServiceGetAddrInfo      v4v6 39-courier.push.apple.com. PID[-1]()
21/05/2013 23:31:15.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:16.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:17.426 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:17.426 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fc0e3201de0> Tue May 21 23:42:48 2013 BST (approx)
21/05/2013 23:31:17.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
21/05/2013 23:31:17.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:17.000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
21/05/2013 23:31:17.000 kernel[0]: LE is supported - Disable LE meta event
21/05/2013 23:31:17.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
21/05/2013 23:31:17.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:17.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:24.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
21/05/2013 23:31:24.000 kernel[0]: TBT W (2): 0x0010 [√]
21/05/2013 23:31:24.000 kernel[0]: Wake reason: EC.DarkPME (Maintenance)
21/05/2013 23:31:24.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
21/05/2013 23:31:24.000 kernel[0]: Previous Sleep Cause: 5
21/05/2013 23:31:24.006 configd[18]: network changed: v4(en0:192.168.1.190, en1-:192.168.1.47) DNS* Proxy SMB
21/05/2013 23:31:24.010 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.47)
21/05/2013 23:31:24.973 configd[18]: network changed: v4(en0-:192.168.1.190) DNS- Proxy- SMB
21/05/2013 23:31:24.978 mDNSResponder[39]: DeregisterInterface: Frequent transitions for interface en0 (192.168.1.190)
21/05/2013 23:31:25.269 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:25.277 hidd[46]: MultitouchHID: device bootloaded
21/05/2013 23:31:26.000 kernel[0]: MacAuthEvent en1   Auth result for: 10:bf:48:3e:02:74 MAC AUTH succeeded
21/05/2013 23:31:26.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
21/05/2013 23:31:26.000 kernel[0]: AirPort: Link Up on en1
21/05/2013 23:31:26.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:26.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
21/05/2013 23:31:26.000 kernel[0]: Graphics suppressed 2278 ms
21/05/2013 23:31:26.000 kernel[0]: AirPort: RSN handshake complete on en1
21/05/2013 23:31:26.580 configd[18]: network changed: v4(en1+:192.168.1.47) DNS+ Proxy+ SMB
21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:22C9:D0FF:FE8F:B1EB)
21/05/2013 23:31:26.583 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en1 (192.168.1.47)
21/05/2013 23:31:26.590 configd[18]: setting hostname to "mikemini"
21/05/2013 23:31:26.592 UserEventAgent[11]: Captive: en1: Not probing 'ASUS60' (protected network)
21/05/2013 23:31:26.596 configd[18]: network changed: v4(en1!:192.168.1.47) DNS Proxy SMB
21/05/2013 23:31:27.016 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:27.000 kernel[0]: nd6_na_input: duplicate IP6 address fe80:0005::22c9:d0ff:fe8f:b1eb
21/05/2013 23:31:28.000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,c5e1,3800]
21/05/2013 23:31:28.797 configd[18]: network changed: v4(en0+:192.168.1.190, en1) DNS! Proxy! SMB
21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:AA20:66FF:FE11:3086)
21/05/2013 23:31:28.803 mDNSResponder[39]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.190)
21/05/2013 23:31:28.816 mDNSResponder[39]: 78: Could not write data to clientPID[-1]() because of error - aborting connection
21/05/2013 23:31:28.819 mDNSResponder[39]: 78: DNSServiceGetAddrInfo      v4v6 13-courier.push.apple.com. PID[-1]()
21/05/2013 23:31:28.835 configd[18]: setting hostname to "MikeMini.local"
21/05/2013 23:31:30.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
21/05/2013 23:31:31.000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 1
21/05/2013 23:31:33.745 loginwindow[42]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
21/05/2013 23:31:33.000 kernel[0]: HID tickle 9738 ms
21/05/2013 23:31:35.674 WindowServer[93]: Created shield window 0xca for display 0x003f003f
21/05/2013 23:31:35.674 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:35.679 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:35.700 WindowServer[93]: Created shield window 0xcb for display 0x003f003d
21/05/2013 23:31:35.701 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:35.712 airportd[1030]: _doAutoJoin: Already associated to “ASUS60”. Bailing on auto-join.
21/05/2013 23:31:36.104 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:36.129 loginwindow[42]: resume called when there was already a timer
21/05/2013 23:31:36.000 kernel[0]: en1: BSSID changed to 10:bf:48:3e:02:74
21/05/2013 23:31:36.896 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
21/05/2013 23:31:36.897 coreaudiod[1003]: HALDefaultDevice::GetDefaultDevice: server returned 0 for the default device, so picking one locally
21/05/2013 23:31:37.669 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
21/05/2013 23:31:37.683 WindowServer[93]: Created shield window 0xcc for display 0x78c8d1b0
21/05/2013 23:31:37.683 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x3f003d
21/05/2013 23:31:37.684 WindowServer[93]: Received display connect changed for display 0x78c8d2fe
21/05/2013 23:31:39.009 WindowServer[93]: Received display connect changed for display 0x78c8d1b0
21/05/2013 23:31:39.026 WindowServer[93]: Created shield window 0xcd for display 0x78c8d1b0
21/05/2013 23:31:39.026 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003d
21/05/2013 23:31:39.027 WindowServer[93]: Received display connect changed for display 0x3f003e
21/05/2013 23:31:39.051 WindowServer[93]: Created shield window 0xce for display 0x78c8d2fe
21/05/2013 23:31:39.051 WindowServer[93]: handle_will_sleep_auth_and_shield_windows: no lock state data
21/05/2013 23:31:39.490 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.490 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.490 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
21/05/2013 23:31:39.491 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
21/05/2013 23:31:39.491 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.491 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.685 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:39.713 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.714 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.730 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:39.805 WindowServer[93]: Created shield window 0xcf for display 0x78c8d1b0
21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd0 for display 0x003f003d
21/05/2013 23:31:39.806 WindowServer[93]: Created shield window 0xd1 for display 0x003f003f
21/05/2013 23:31:39.811 WindowServer[93]: Created shield window 0xd2 for display 0x78c8d2fe
21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
21/05/2013 23:31:39.841 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2: Startup Mode 1920 x 1080, CGSThirtytwoBitColor, Resolution 1, IOMode 0x80000000, IODepth 0x0, IOReturn 0x0
21/05/2013 23:31:39.842 WindowServer[93]: Display added
21/05/2013 23:31:39.842 WindowServer[93]: Display removed
21/05/2013 23:31:39.875 WindowServer[93]: Display 0x78c8d2fe: GL mask 0x4; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, OpenGL-accel, Vendor 5e3, Model 2353, S/N 63d, Unit 2, Rotation 0
UUID 0x000005e3000023530000063d00000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.876 WindowServer[93]: Display 0x78c8d1b0: GL mask 0x1; bounds (1920, 0)[1920 x 1080], 16 modes available
Active, on-line, enabled, boot, OpenGL-accel, Vendor 5e3, Model 2353, S/N 572, Unit 0, Rotation 0
UUID 0x000005e3000023530000057200000000, ColorProfile { 3, "HD 709-A Calibrated"}
21/05/2013 23:31:39.876 WindowServer[93]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x000032af, unit 0, caps QEX|QGL|MIPMAP, vram 1412 MB
texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003d: GL mask 0x2; bounds (4864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
21/05/2013 23:31:39.876 WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (4865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
21/05/2013 23:31:39.883 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d2fe device: 0x10646ea10 isBackBuffered: 1 numComp: 3 numDisp: 3
21/05/2013 23:31:39.892 WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x78c8d1b0 device: 0x10646e110 isBackBuffered: 1 numComp: 3 numDisp: 3
21/05/2013 23:31:41.029 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.059 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.062 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.076 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.088 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.089 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.103 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.104 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.843 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.846 WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.871 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.872 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.889 WindowServer[93]: Display 0x78c8d2fe: MappedDisplay Unit 2; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:31:41.890 WindowServer[93]: Display 0x78c8d1b0: MappedDisplay Unit 0; ColorProfile { 3, "HD 709-A Calibrated"}; TransferTable (256, 3)
21/05/2013 23:32:20.130 com.apple.backupd-helper[1043]: Not starting Time Machine backup after wake - failed to resolve alias to backup volume.

Hard Drives not sleeping SystemUIServer Hangs

I have been having problems with SystemUIServer “Hanging” when I used either my scanner or digital card reader which are both connected via FireWire. USB devices didn’t do this. You could see that it was Hanging in the Activity Monitor window. I was told that it was probably one of the apps that I run in the menu bar, and to uninstall them individually, and restart, to see which one was responsible. After doing this procedure SystemUIServer would still “Hang” so I was unable to resolve this problem.
Unfortunately, after reinstalling all the apps that had been removed I noticed that the two additional hard drives that I have installed which normally spin down, or sleep when not in use, were no longer doing that when I ran my browser, Firefox, and/or another app called OSXplanet. The drives just continued to run even though they were not in use. I spent almost two months tinkering trying to determine why these additional internal hard drives were not going to sleep when I ran these programs. One drive was for OS 9.2 only so it had nothing to do with the normal operation of OS X.3. I finally stumbled upon a description of what happens when you startup in Safe Mode, or Safe Boot, which only loads the basic programs of OS X. I tried starting up in Safe Mode and both hard drives spun down when either Firefox and/or OSXplanet were running.
I then took select screen shots (Shift-Command-4) of the Activity Monitor window with the Process Name selected in the window after a normal startup, and after starting up in Safe Mode. To select the Process Name just click on it. You can’t Save the Activity Monitor as it just gives you a plist. I compared the screen shots and found five apps that were not running during Safe Mode. I Googled each one to see what I could learn, and found a couple that were installed by Norton Utilities. I used Find in Panther to locate the apps in their respective folders. After removing something called DTDaemon, and restarting, the hard drives would go to sleep so I trashed those two items that were related to Norton, and uninstalled everything else using Norton’s Uninstaller v1.0.2. You have to be careful when pulling items out like this because you can easily remove something that can break OS X, but that’s why you check to see what each item is before removing it using Google.
Yet, after doing that, when I would use Command-O to open a document in say Appleworks, or just start Adobe Photoshop 7.0, the two additional hd’s would spin up and not go back to sleep. I had to restart to get the drives to sleep again. When I used Command-O the window would open and the selection would start with the computer’s name which opened to all three hard drives and Network. To see if there was some extension that was still affecting this I again did a Safe Boot by holding the Shift key down immediately after the startup chime. After booting into Safe Mode the hard drives did not spin up and continued to sleep when I used Commnad-O, or started Adobe Photoshop, so I restarted in normal mode. After performing this procedure the drives no longer start spinning when I use Command-O to open a document, or when I started Adobe Photoshop 7.0. Any ideas on what happened the second time I used Safe Mode to startup in? Supposedly there are repairs made when you do a Safe Boot, and I would love to know what. Hopefully this will solve someone else’s problem too. Also, any ideas on how to resolve the SystemUIServer “Hanging” whenever I use a FireWire device? I’m getting tired of Force Quitting SystemUIServer everytime I use my scanner or transfer pictures.
G4 Quicksilver Dual 1 GHz, 1.5 GB RAM, Sonnet ATA133 card, Maxtor ATA133 HD's Mac OS X (10.3.9) B+W G3 450 MHz, OS 9.2.2, 1 GB RAM

You have certainly done a lot of good debugging and I am sure that these problems have been quite vexing. Regarding the Safe Boot, you have probably seen Apple's article on What is Safe Boot, Safe Mode?. The repair function that a Safe Boot does is to run a unix program (fsck) which attempts to repair the filesystem's directory structure. The directory structure is the mechanism that tells the operating system where files begin and end on the harddrive. It is conceivable that the 2nd Safe Boot repaired a problem that had cropped up, although I am not totally convinced of that.
Regarding the systemuiserver hanging with firewire devices, I have seen a number of posts on such issues but there does not appear to be a lot of information about how fixes, if they exist.
One more troubleshooting step that I will suggest is that you look in your console.log file to see if there are messages issued at the time that the hangs occur. One way to do this is to start the Console app from the Utilities menu. Make sure that the console.log file opens - if not, select it with the logs icon at the upper left of the Console app's window. Then, do something to cause the Systemuiserver to hang. See if something is printed to the console.log file. If nothing shows up, select the system.log file and repeat the process. If you get any messages, please report them here and perhaps someone will be able to interpret them.
EMAC G4 1.0 GHz Mac OS X (10.4.6)

External hard drives always spinning....is this normal?

I have a few external hard drives for my Mac Pro, a couple Weibetech 1TB drives, and a Drobo device that I just got to work as a backup. I just switched to this Mac Pro from a Macbook, and I am noticing my external drives are always spinning, and sometimes get pretty warm. Is this normal? The drobo's fan has been on all day, and I am not using it for anything. Is this normal?
Also, if the drives are not spun up, I notice that when I do certain things, my computer spins all my drives up, and wheel spins, even if what I am doing has nothing to do with that drive. I would think that the computer would wait until you tried to access the drive to spin it up.

I've seen the useless spinup of external drives accompanied by the spinning beachball too.
It usually happens when Finder or Spotlight are started/accessed/used. (for example, I press cmd+space to open spotlight, then I have to wait for my external drives to complete spinup before I can do anything... it just sits there, showing me a spinning beachball...)
I worked around this by telling Spotlight not to index my external drives, but now I can't use Spotlight for searching files on these drives...
Let's hope this is handled better in SL...
As to why they're sometimes on all day and sometimes not, no idea. Try the free application "What's Keeping Me?" to see if there is any process still attached to a file on that drive. Perhaps some process is keeping OSX from putting these drives to sleep...

External Hard Drives not being recognized

I have 3 external hard drives. Had them for a long time now. I recently made only one change: I decided to start using the 'sleep' mode.
I noticed the sleep mode and external hard drives didn't get along real well, so I simply took the externals (used only for backing up data) and turned them off.
Its now been about 2 weeks, time to fire them back up and backup my data. Only one of the 3 is being recognized. The other two seem to come on, make the usual whiny noise and such, but aren't seen in the finder.
I've tried restarting my computer, turning off/on the hard drives, unplugging/replugging them from power, unplugging/replugging them into USB. I've verified connections, that kind of thing. Nada.
Any ideas on what to do to help my computer 'see' that they are there? this is a bit baffling to me and disconcerting, to say the least. I've never had problems with my computer recognizing the externals before.
Ideas are appreciated.
PowerMac G4 1.42 duel Mac OS X (10.4.6)

'sleep mode' ?
Do you mean the drives are triggered to not spin up for a period after powering on ? This is a feature designed for enormous banks of drives, so that when they are powered on, only a fraction spin up immediately, then another set, usually 12 seconds later, then another set, etc, until all are up to speed. This is reduce the power surge from spinning up 700 hard drives simultaneously in a commercial solution.

DVD drive light on Satellite M50 does not turning OFF, drive not reading CDs/DVDs

Hello,
I have a Satellite M50-mx5 with a Mat****a DVD drive. When I insert CDs or DVDs, the drive starts up, spins the CD around (the light is blinking)...but a few seconds later, the drive stops spinning, but the DVD drive light remains on.
Windows also thinks that the DVD drive is empty.
I also tried to boot Windows from CD when the computer starts up, but with no success either.
Any ideas to what's wrong? Is my DVD drive broken?
Thanks
Eli

Hi
Sorry to said it but in my opinion the drive is dead and only the replacement can helps to get the drive functionality back.
But be aware that not every drive is supported and can be used with the notebook!
Take a look into the user manual. Sometimes the compatible drives are listed.
And its useful to known that all parts can be ordered from the ASP in your country.
have a nice weekend ;)

DVD drive not recognized, then all out crash. HELP!

I was watching a DVD, and then I got an email notification which caused the DVD player to freak out and freeze. I restarted the computer to find out that the DVD drive was no longer recognized. Restarted a couple more times...no luck. Now's I've got a DVD stuck in there. So I open up the computer to make sure all the wires are connected. I push the power button AND NOTHINGG! The little power light goes on for about 5 seconds, then turns off. All I hear is a small 'click'. I tried a couple methods to fix it, and only succeeded in getting the DVD drive to spin, but no power in the computer itself. And now it's back to light/'click'/nothing. Am I beyond help here? Do I need a new computer? I'm so stressed out!
Oh and if it comes down to needing a new mac, what would everyone suggest I get besides a mini. I am thinking of a macbook pro, but the price is way high for my funds right now. I also like the imac, but my concern on that is whether or not you can upgrade it after the fact.

I took my mac in to the store to find out the logic board crashed on me. Way too expensive to fix since it's about the same cost as the mini itself. I'm just going to buy a new macbook. (I realize I'm spending more than it would to get a new logicbaord, but I want a new laptop!)

External hard drive not found

I finally ventured into OS X territory. Before doing so, I backed up (drag and drop) everything onto a mobile 80 GB USB Western Digital hard drive. The backup was a success, and installing OS 10.0.4 went fine, but I cannot locate the hard drive. When the USB is plugged in upon startup, nothing comes up. If I plug it in after starting up, it says something like "OS X does not recognize some of the files ..." and gives me the option to continue or initialize with Disk First Aid. I didn't want to initialze because I thought that would erase everything. I read in some of the other posts that 10.0.4 isn't worth much and I plan on going up to at least 10.2 within the week. Is this a 10.0.4 issue that could be resolved by upgrading?

Hi Kat,
I went to disk utility, and my drive is listed under devices, but is not highlighted, so I cannot click on it.
I am wondering if it has something to do with the new system update
Possibly. Can you boot from an earlier install disk?
If the drive is spinning up and can't be selected I've had good luck retrieving files with Data Rescue II. It's free to demo and you can download 5 MB for free.
Richard

Opening PDF causes spare Hard drive to spin up

Hello,
      I use Adobe Web Premium CS3 on my desktop. The OS and software are installed on the primary drive. I have a spare hard drive on the desktop that is used infrequently. After an hour of using my desktop, the spare drive usually spins down due to no-activity.
      Now, anytime after this happens, if I open a pdf (from the desktop or the web), and try to scroll thru' it, there is a delay - till the spare drive spins up. Once the drive is up, I can browse the PDF without a problem.
I'm guessing that the Web Premium CS3 installation (or a subsequent update) installed something on the spare drive that is needed for Adobe to read PDF.
Is there a way to prevent this from happening?
Thanks
Note: The OS is Win 7 (x64) Ultimate. Acrobat is version 8.1.7

Hello,
      I use Adobe Web Premium CS3 on my desktop. The OS and software are installed on the primary drive. I have a spare hard drive on the desktop that is used infrequently. After an hour of using my desktop, the spare drive usually spins down due to no-activity.
      Now, anytime after this happens, if I open a pdf (from the desktop or the web), and try to scroll thru' it, there is a delay - till the spare drive spins up. Once the drive is up, I can browse the PDF without a problem.
I'm guessing that the Web Premium CS3 installation (or a subsequent update) installed something on the spare drive that is needed for Adobe to read PDF.
Is there a way to prevent this from happening?
Thanks
Note: The OS is Win 7 (x64) Ultimate. Acrobat is version 8.1.7

Cd drive not spinning

Similar Messages

Maybe you are looking for