Cd/dvd burner and usb ports don't work with itunes

I got a 7th_generation_ipod_nano for Christmas and when I downloaded itunes I discovered my cd/dvd device disappeared and my usb ports no longer worked. I tried a fix and that failed so did a system recovery to the time prior to my itunes download. My ports and cd/dvd worked normally. I then re-downloaded itunes and again the ports and cd/dvd failed and again I did a system recovery and again they worked normally. Anyone got a clue? I noticed I am not the only onw with this problem and am wondering if its a bug in the new download. Any help most appreciated. Thanks!

I discovered the answer to my own problem and anyone else out there who needs it here it is: If you have itunes installed on your computer and cd/dvd device is not working do a system restore to a time prior to the dl of itunes. Check to make sure your cd/dvd works again. If it does, then all you need to do is make sure your ipod is NOT connected to your computer while you download itunes again. Should fix the problem.

Similar Messages

W700 dock eSata and usb ports don't work

Tried on 2 different docks, tried with Windows 7 and Windows XP, the esata port does not work, nor do the 4 usb ports,
What to do??

Have you tried booting from a Linux Live CD, e.g. Ubuntu , just to make sure that it's not software related?
W520|4282-W16|2720QM|16GB|Q1000M|FHD|500GB|UMTS|BIOS 1.26|Gentoo Linux/2.6.39-r3|Win7-64-Prof|

PS2 mouse and USB Kb don't work with K8n Diamond

Hi all,
So, I've a USB keyboard and a PS2 mouse, on every boot the mouse freeze but the keyboard work.
If I connect a PS2 keyboard (and unplug the USB keyboard), the PS2 mouse works.
I've read the posts on this forum but I don't find the solution
(sorry for my english)

Up plz

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

USB ports don't work - 880GMS

http://
HELP ME
My usb ports work fine until Sunday, I restart the W8 OS and they don't work (my last activity was configure a router but I didn't install anything). I've two OS (W8 and Ubuntu 11.1) and I tried all and my USB ports don't work. I don't have any idea about the cause of the problem. All work fine except my USB ports. They are enable according to the BIOS but the OS (W8, W7 or Ubuntu) doesn't recognize any device.
I tried this things:
- Change my porwer supply
- Restart the BIOS to the Fail-Safe and Optimal value default
- Clear the CMOS (Changing the jumper and remove the battery)
- Remove the W8 and install W7
- Remove W7 and install Ubuntu 11.04
- Flash the BIOS to the last update (it's the same that was loaded in the BIOS)
Currently, I don't know what I must do it. I'm really disappointed with this board (MSI 880GMS-E35). This is my second problem with these model. Previously, I've one and it didn't supply the energy to start the proccesor (Phenon X4 955). My actual board works fine until Sunday.
Please help me to solve the problem.

OK, I have no idea but fortunately my usb ports work fine now.
I don't know how to fix the problem. But I can assure that thanks to Ubuntu it's fixed. My last two operations were:
- Flash the BIOS
- Check lsusb
Yesterday, I'm full disappointed and I was going to prepare my hard discussion with my provider when suddenly I found a this post:
http://askubuntu.com/questions/69594/my-usb-ports-randomly-stop-working-till-a-reboot
But before to enter the command in the Ubuntu's console, I saw that my USB devices work. It's amazing!!! I'm a newer electronic engineer and I saw events similar that this more than once time in my labs (Typical student experiences).
If anyone has the same problem, I could recommend:
- Check BIOS usb options
If these are ok, else enable the propertly options
- Check # lsusb (In Linux)
If your ports don't appear check the PSU (Maybe there are others things that you should check) else
- Check # dmesg | tail (Before and after to connect a usb device)
If there is an error saw in forums, maybe it's the common problem so far (Incompatibility in the kernel -error hci-)
- Type # acpi = force irqpoll
ELSE
- Flash the bios as show in this forum
ACLARATION: I think that this algorithm might help you but I don't prove this. It's your responsible to do that. I only write the items that I learn with this issue.
CONCLUSION: I don't wish that anyone has this problem. I lost one week trying to solve it.
POST RELATED TO USB DON'T WORK CAUSE PROBLEM (ABOUT dmesg and interpretation)
https://bbs.archlinux.org/viewtopic.php?id=102553
POST RELATED TO FLASH THE BIOS
https://forum-en.msi.com/index.php?PHPSESSID=0uaa1psa1gln707een5uu6sb16&topic=138659.0

TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.

Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not showing in the task bar at all.

Hi SBrwn,
Thanks for visiting Apple Support Communities.
The symptom you're describing can be frustrating to troubleshoot as our options are limited. I do suggest resetting the System Management Controller (SMC) if you have not already. This step can help you regain use of USB and Bluetooth.
Follow these steps to reset the SMC on your iMac:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer. [by holding down the power button]
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
You can find these steps and more information at this link:
Intel-based Macs: Resetting the System Management Controller (SMC)
All the best,
Jeremy

I use USB portable speakers from Trust, but they don't work with iTunes, but they do with wmp... any tips?

Hello,
I currently use Trust USB portable speakers in combination with my windows 7 minilaptop. But the problem I have is that they don't work with iTunes(newest version). However, they do work fine with WMP, any ideas how I can solve it?
Thanks!

Contact the manufacturer of the speakers.

Pause, back, and fwd (F6-8) keys don't work with iTunes. [Windows 7 64-bit]

All my other F# keys work (I can adjust the screen brightness, adjust the volume...etc) but my Pause (F8), Back (F7) and Fwd (F9) keys don't work with iTunes. Though they DO work with Windows Media Player.
How can I get them to work with iTunes?
I'm using Windows 7 64-bit on a macbook pro.

Same problem here.
I'm using Macbook late '09 + Windows 7 64-bit + iTunes 10.0.1.22 for Windows,
and my media function keys don't work. I don't use Windows Media Player though.

My Toshiba Satellite A660 USB ports don't work and the webcam doesn't either.

For some odd reason all my USB ports doesn't work. It worked fine with I got it and this laptop is pretty much new. I also tried to uninstall and install the USB device back but I always get an error saying it didn't work. Any solutions to fix this?
Also, my webcam doesn't work. Every time I log into my laptop I always get this error saying "Web camera initialization failed. Please check your camera device and restart application or computer." I have no idea how to fix this. Can anyone help me out please?

For your USB ports, try this one first..
1. Make sure that the power light is off.
2. Unplug you AC adapter form your laptop then remove the battery.
3. Without those two, hold down the power button for 10 seconds then release it. After that put the battery and the AC adapter in.
4. Turn NB on and just choose start windows normally.
This is the simplest thing that you can do. Basically, the reason behind this is because it will reset the microprocessor on your system board. Try this first then if it failed check these links:
USB port may stop working after you remove or insert a USB device
Tips for solving problems with USB devices
For your webcam, you said it is giving out a message "Web camera initialization failed. Please check your camera device and restart application or computer.", that means the application is not installed properly. You only need to uninstall it first from Start > Control Panel > Programs and Features (make sure that view should be in large icons) then look for the Web Camera Application (looking at your laptop model I assume it's Toshiba Camera Application) then uninstall it. To reinstall it back, pull up the Toshiba Application Installer by going to Start then type in Toshiba Application Installer. Once you got it pulled up, click on Next Button and look for the application that has a name webcamera from the list and install it.

USB ports don't work after resuming from standby with Windows 8 on X230 tablet

I have just done a clean install of Windows 8 on my X230 tablet. Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50). After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files. I've also installed all the latest Windows 8 updates.
Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work. My computer has two USB 3.0 ports and one USB 2.0 ports. All exhibit the same behavior. After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized. After restarting Windows, the USB ports work again... until I resume from standby mode again.
I hope there is a solution to this issue. It is very frustrating.

Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature. I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager. Unfortunately, the same symptoms of my problem persisted.
I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site. At the bottom of the file it gives a "Summary of Changes". Under version 2.03 of the BIOS (the version just before version 2.50), it says:
- (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
This indicates that Lenovo support was already aware of such issues. The problem was intended to be fixed in version 2.03 of the BIOS. However, the issue persists on my machine, even with the latest BIOS.
Hopefully someone from Lenovo can comment here.

Upgraded to Snow Leopard and USB ports no longer work completely

Hi!
So my wife is using my older (from 2007) 15in macbook pro. We just installed Snow Leopard (from Tiger) and the USB ports are no longer functioning correctly.
Previously, intermittently (between restarts) one of the USB ports wouldn't work well, but restarts always fixed it. This would happen maybe once or twice a month.
Currently, neither the left or right USB port work well. Both will run a USB mouse and charge an iphone, but neither will recognize the phone or a card reader as plugged in.
We've tried restarting. Tried turning off, unplugging, removing the battery and holding down the power for 5 seconds and restarting.
Nothing is working. Does anyone have any tips on how to fix it?
(The iphone is recognized by my macbook pro, so it's not the wire or the phone, at least as far as we can tell.)
Thank you kindly in advance.

I think it's time you upgraded to a newer version of Photoshop.

USB hub does not work with iTunes

I have been trying to add USB ports to may Mac's and am not able to synch through the hub. They are hi speed 2.0 USB hubs by Rocketfish and Belkin. iTunes locks up until I remove them from the USB cable (spinning color wheel) and then iTunes goes back to normal. I have tried with both my 24" Intel iMac (Metal one) and a new 15" Macbook Pro. When I use the USB port on the Mac iTunes works great. There seem to be a ton of USB problems posted and zero answers on how to correct. I have tried with an Color iPOD, iPhone and an iTouch to no avail. Having a couple of USB ports won't work in my situation. Anyone know if Apple has posted a workaround or a real fix anywhere.

Thanks, I missed where I posted But I tried with my HP - Same issue. I think others have had this. I believe that iTunes is hit or miss on Hubs. I wish I could figure out what makes them a hit - instead of a miss.

CD/DVD, SD and USB ports aren't usable

Hello, I recently discovered multiple problems with my Satellite M305-4848 laptop running Vista Home Premium Service Pack 2. I hadn't used any of these recently so I am not sure when the problems started or what might have happened to cause them.
First when I put in an SD card which works fine on my other PC's the system responds that the card needs to be formatted. But if I try to format it the system says it cannot be formatted. I have tried multiple cards that work fine on other PC's.
Second when I try to use any of my USB ports the devices don't work. I tried my USB 3 1/2" flex drive and it also says it needs to format the disk which reads fine on a different PC's USB port. I tried my connecting my IPOD (which I have done many times in the past) and the PC says the IPOD data is corrupted and that I need to do a restore to my IPOD.
Lastly, my CD/DVD drive does not recognize the data on a prerecorded disc. For example, when I put in commercially created DVD video disc and double click on the D: drive on My Computer the system opens the drive and shows a popup saying "Please insert a disc into drive D:".
I have tried using the Control Panel Device Manager and doing an Update Driver Software on the obvious drivers but it hasn't helped. I also tried using the F2 Setup and Load Defaults and I ran a newly updated Norton Scan which found no problems.
I'm not sure what to try next. Any ideas? WiFi works and I have no problems with items on my hard drive.

I discovered the answer to my own problem and anyone else out there who needs it here it is: If you have itunes installed on your computer and cd/dvd device is not working do a system restore to a time prior to the dl of itunes. Check to make sure your cd/dvd works again. If it does, then all you need to do is make sure your ipod is NOT connected to your computer while you download itunes again. Should fix the problem.

DVI to ADC Adapter + Mini DVI to DVI Adapter = usb ports don't work?

I have a 23" Cinema with the ADC plug. I've been using it with the DVI to ADC adapter for many years, though I did not use any of the monitor's usb ports during this time. I recently bought a new Macbook, so now I have am combining a Mini DVI to DVI adapter with the DVI to ADC adapter. The display works fine, but now I find the usb ports on the monitor do not work. I've checked all the pins involved and they are all straight and look normal.
Does this have anything to do with the double adapter situation, or could it just be that the monitor's usb ports are aging and haven't been used in a long time? Or is it possible these ports do not support usb 2.0 devices?

Thank you Malcolm.
It's true I cannot adjust the display's brightness using the buttons on the monitor. But I can put the Macbook to sleep, both when the adapter's usb cable is plugged in and when it's not.
So if the usb circuitry has gone bad, will this cause me any other problems, or can I just ignore it? Right now I am trying to choose an external hard drive to buy, so I'm taking stock of my available ports. I don't think I'd put a big hard drive on a usb 1.1 port anyways.

Since upgrading to Lion 10.7.3 my USB ports don't work for anything. Any ideas?

I have been a long-term (nearly 25 years) Apple User, so am reasonably familiar with the system. I upgraded about 1 week ago with an automatic update to Lion and since then I have had massive problems using the USB ports on my Mac Pro (which is from 2009). At first this affected every USB port and I couldn't use my keyboard or mouse, but since restarting a couple of times, and repeatedly inserting and removing them into the various rear ports, I can use these plugged in via monitor cable.
However, the USB ports for other devices are extremely problematic and frustrating as nothing seems to work consistently on them. This affects all devices that I usually access (and which all worked seamlessly before upgrade), including my iPhone (which will power up but not be recognized when plugged into any front or rear port), external drives, cameras, and my printer. However, for the printer only (a Brother MFC 9840) it will work some times if I restart the computer, but not others. I have tried rebooting, switching ports, using other cables, changing power cords. I have read multiple threads on USB issues with Lion for a solution including those to do with printers (https://discussions.apple.com/thread/3301218?start=0&tstart=0), those to do with external drives (https://discussions.apple.com/thread/3510032?start=30&tstart=0), and even those to to with modems (https://discussions.apple.com/thread/3164614?start=0&tstart=0). Despite this, I note that there appear to be no consistent solutions reported and that in other support threads including reseting PRAM. I do see many more problems than I would have expected.
I don't know if this is related, but after the upgrade I also had problems with Outlook not working, but for some reason that seemed to stop after a couple of days. Just in case I also checked to see if I was affected by the malware program (https://discussions.apple.com/thread/3856206?tstart=30), but thankfully I am not.
I am sure this has to do with the upgrade to Lion 10.7.3, and have been expecting something from Apple to address these issues, but nothing so far. I am completely lost for solutions, and any help gratefully received.
Slightly unrelated, but again speaking to a possible change in culture in Apple that has seen upgrades cause more problems than they solve, I am also affected by the change from MobileMe to iCloud and the loss of push e-mail. For those not aware, this has been an issue for more than 6 months, and on the discussion there are now 35 pages of comments, and no solution in sight (https://discussions.apple.com/message/18050375?ac_cid=142432#18050375).

Generally speaking, a full recharge and reboot after the recharge will solve the issue with the ports. Many ports will also start to fail if you leave devices hooked up to them when the machine is asleep. Unfortunately, many non-Apple devices don't understand the low power mode ports go into after Energy Saver is woken up, and only a reboot solves that problem.

Cd/dvd burner and usb ports don't work with itunes

Similar Messages

Maybe you are looking for