CD/DVD Combo Drive ejects media

You pop in a cd, it pops back out. It doesn't mount to desktop. I have tried different brands and I am using the right CD-R. I zapped PRAM. Any suggestions?

will it take and DVD movies, install discs, music CDs?
try resetting the PMU -
If the computer is on, turn it off.
Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
Wait 5 seconds.
Press the Power button to restart the computer.
looking at the age of the computer, might be the drive has finally bit the dust.

Similar Messages

  • CD/DVD combo drive ejects CDs-but only specific ones !!

    hi all,
    I have the following problem with my mac mini:
    a)when I enter any movie DVD, it is either ejected in a few minutes, or worse, it just sits in the Drive,(no mounting on the Desktop) and I have to restart (w/ mouse button pressed to eject)
    b)any movie CD I enter (recently got brand new PoC-DMC; so no scratches etc on it too) same as (a) above
    c)Insert the "Mac OS X Install Disc 1 and Apple Hardware Test" DVD (that came originally with my mac mini), and same as (a) above
    d)However, insert the Mac OS X Tiger Upgrade DVD and it WORKS!!!
    As of writing this, both Disk Utility and Sys Profiler have hung up. though had the same problem as mentioned above yesterday too, and then Sys Profiler was listing the combo-drive, and Disk utility was not. (as per what i read on some other posts in this forum, that would be proper behavior by the system)
    Would appreciate any insights into this.
    Thanks
    mac mini 1.42GHz PPC G4, 512 MB RAM   Mac OS X (10.4.9)  

    Is there any other means of resetting a hardware
    optical drive??
    I'm not confident this will work but it's worth a try, it certainly won't damage your machine. Boot into Open Firmware ("Command + Option + O + F" on startup chime) and run 'reset-nvram' followed by 'reset-all'. Then boot into OS X by typing 'mac-boot'.
    If this doesn't work boot into Open Firmware again and run 'eject cd' followed by 'mac-boot'.
    You could also try forcing OS X to accept that the drive isn't in use by following the instructions here, however they do assume that a disk is stuck in the drive.
    Matt

  • DVD-R Drive ejects blank discs.

    I have an Intel iMac G5. My DVD-R drive ejects all blank discs. No error message comes up, just some mechanical noises prior to ejection. Having trouble finding the right drivers to fix this, if it is a driver issue.

    yes, there are countless blank media types, and there is NO DVD burner out there that will feed them all.
    DID you switch to a new DVD blank media?
    Also cheap DVD blank media has about a 10% reject ratio......try further down the stack
    hard lessons learned after burning many 10s of 1000s of DVDs.
    If it also ejects commercial DVD movies, you have a dirty laser diode lens.

  • DVD combo drive failing on eMac

    My DVD combo Drive is going on my eMac, and I'd like to know if I can buy a replacement through Apple or through a 3rd party. Also would like to know how difficult it is to replace by myself. My machine is an eMac 800 MHz PowerPC G4, 1gig Ram. The specs on the drive are:
    PIONEER DVD-RW DVR-104:
    Firmware Revision: A227
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    Any help is appreciated. Thanks, Steve

    Hi Steve,
    No-one bothers with Combos these days as Superdrives (DVD burning) are quite cheap.
    I replaced in my eMac a Combo, originally a Pioneer drive with a Pioneer Super DVD 109 8X DVD-R/RW drive from OWC. It works great.
    The current model is a DVR - 115 D but is essentially the same and would suit your model.
    https://eshop.macsales.com/shop/optical-drives/superdrives/powermac/
    Installing it was easy.
    Remove the shell, and carefully disconnect the power wire.
    Remove the screws that hold the optical drive, slide it out and install the new one.
    No software drivers are needed.
    regards roam

  • Replace DVD Combo Drive on eMac

    My DVD combo Drive is going on my eMac, and I'd like to know if I can buy a replacement through Apple or through a 3rd party. Also would like to know how difficult it is to replace by myself. My machine is an eMac 800 MHz PowerPC G4, 1gig Ram. The specs on the drive are:
    PIONEER DVD-RW DVR-104:
    Firmware Revision: A227
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    Any help is appreciated. Thanks, Steve

    Most of the readers of the "Older Hardware Products" section have some familiarity with products pre-1997. Your eMac is positively modern by comparison.
    You would get more readers, and therefore be more likely to get better advice, on the eMac forums:
    Category: eMac
    Just click on the most appropriate Forum in that category to get a "Post a New Topic" button.

  • Cd-rom dvd combo drive question

    Hi folks, I'm currently experiencing probl with my cd-rom dvd combo drive cheepo "rosewill". When I'm playing dvd movie the sound is clicking and it's really anoying.To make sure it is dvd combo drive , copied dvd (vob) file to comp, and then played; Sound was perfect.is this something wrong with my dvd drive or I just missed something  ??

    definately the drive, tried 2 brand new dvd's no luck. Gonna rma, thanks anyway
    Rob

  • IBook Tangarine with a cd/DVD combo drive.

    Hi,
    I've recently see on the UK Ebay site a Tangarine iBook, where the seller has upgraded it somewhat and put in a CD/DVD combo drive. (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8802810218&sspagename=ADME% 3AL%3ARTQ%3AUK%3A1&rd=1)
    I contacted the guy to ask him what the make and model of the drive was and he told me it was a Toshiba SD-C2502 drive. He said that you need to use F12 to open it and hasn't mentioned if it has suffered from any cosmetic damage.
    I have a Blueberry iBook and I'm interested in upgrading it to have a cd/DVD combo to watch DVDs on. I've previously put in a 60Gb hard drive using the wonderful instructions recommended by users her from PBFixit.
    Is this feasible and has anyone done that before? If so can you tell me whether it's wrth the effort?

    Hi ScoringSkins -
    It is possible to install a DVD drive in your clamshell. However, there have been reported problems with using Apple's DVD Player (in OS X) to view the DVD's because it requires the Rage128 or later graphics chip. There are other players that will do the job.
    Check out the drive database on the site www.xlr8yourmac.com for drive compatibilities and optional DVD players.

  • Combo drive - ejects DVDS

    The combo drive for my Powermac G4 (mirror drive doors, running 10.4.7) will play and import CDs just fine, but won't recognize DVDs. I've tried putting in various movies, burned DVDs, etc. and it just spins for a while and spits them back out. They never appear on the desktop and DVD player doesn't open.
    What's wrong? How can I fix it?
    Thanks,
    David
    Powermac G4   Mac OS X (10.4.7)   Mirror drive doors

    I read elsewhere on the site about resetting the PRAM and that solved the problem. Drive functions normally now.

  • Combo drive ejecting all disks

    The combo drive in my macbook is unable to read any disks, either cd or dvd, burned or commercial. It won't even read the system install cds. It will attempt to read the disk for about 10 seconds and then eject it. This only happened recently, the drive has always worked fine before. Does anyone know of anything I can try to fix it, or will I just have to get it replaced? The warranty just expired a couple of months ago, so I'd like to avoid this if possible. Thanks for any help.

    See if any of this helps. Trouble shooting slot load drives.

  • UltraBay CD/DVD Combo Drive Compatibility with X200 UltraBase

    I have a T500 with a CD-RW / DVD-ROM drive (part #44C1930). Wondering if this drive is compatible with the X200 Ultrabase or I need to get a whole new drive altogether?
    Help would be appreciated.

    if it is from the T400, T500 or W500 then it is compatible with the X200 ultrabase.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Tape Drive ejecting media automatically

    Hello
    We have a DDS 3 Dat Tape Drive . When we insert a media , it will check the cartridge for some time and it is ejecting automatically . when i type mt stat it shows "No media or tape loaded " and both the lights are off . Please suggest me what could be the problem
    Thanks / Regards

    OK, so lots of other people have been experiencing this as well....
    http://discussions.apple.com/thread.jspa?messageID=1082140&#1082140
    I'm kind of at a loss here, I guess I'll give all the cleaning advice suggested in that thread a go but I still reckon some software is missing? There must be some code that reads CDs....a different set of code to that which reads DVDs?
    I'll have to buy an external drive today, I'm a musician & my Mac currently has no music software on it or any way to install it!!!! My studio is currently useless...
    :o(

  • Won´t accept CD-R, but works fine with DVD (Combo-Drive)

    Hi there,
    my emac got stuck after using a audio-CD with a little scratch. After restart I introduced normal CD-R, but they just got ejected by themselves after a few strange noises and about 5 seconds. I put in the MAC OS X start-up DVD, and it worked perfectly.
    The question is: is there anything I could do, besides upgrading my eMAC after all to a Superdrive?
    Doing some reliable(?) Internet research, it looks, that that can´t be too hard, and my warranty has expired anyway. So the second question goes:
    Which brands and models are working fine? (Looks like Pioneer does, but only them?)
    Thanks a lot,
    Daniel.
    eMAC   Mac OS X (10.3.9)  

    Hi,
    I had the same problem on my 14 month old (under-used!) 1.25 combo, would read dvd fine but not cd-rw, I tried a cleaning disc and even took out drive to blow out any possible dust! still no luck.
    I then decided to go superdrive and put in a Pioneer 110D cd/dvd burner as this seemed the popular choice, I found installation easy, I left the jumper on back of cd burner on 'CS' as my original one was set to that. I then fired up emac and installed 'Patchburn 3' software patch available as a download from the internet to finish the installaton. So far it all seems ok!

  • ThinkPad L530 DVD-RW Drive Ejecting Randomly & Crashing

    The dvd drive will eject randomly and when that happens it crashes my laptop. The screen will go black and you have to hold down the power button to restart the comp.
    This happens whether or not the dvd drive is is enabled or not. I ran a virus scan and found nothing. 
    Am running Windows 8 in desktop mode. 

    Hi again, cruxial
    I did some brief research on the Event ID 41 error and found a few things. One Microsoft article (found here) advises to make sure that the memory is not having issues. This can be checked by pressing Enter at the LENOVO screen when starting the computer, and then running the diagnostic called the Quick memory test. A user on a Microsoft forum (found here) found that once all drivers for his system were updated, the error stopped for him. I would give these steps a shot and see if anything changes. The drivers for your system can be found here.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • CD/DVD Combo drive Reset

    My powerbook of 3+ years all of a sudden today decided to not accept any cds/dvds anymore
    its like the drive is stuck in eject mode. Its a slot loading 1ghz 12" al powerbook.
    Anyone know of a step to take to figure this one out. Ive had apple store look at it but since im beyond my warranty its going to be 300+$ for a repair/replace!!!
    pbfixit shows me how to get at the drive, but im wondering if there is some way to "reset" the drive and maybe get it to work again.
    thought are appreciated

    Is there any other means of resetting a hardware
    optical drive??
    I'm not confident this will work but it's worth a try, it certainly won't damage your machine. Boot into Open Firmware ("Command + Option + O + F" on startup chime) and run 'reset-nvram' followed by 'reset-all'. Then boot into OS X by typing 'mac-boot'.
    If this doesn't work boot into Open Firmware again and run 'eject cd' followed by 'mac-boot'.
    You could also try forcing OS X to accept that the drive isn't in use by following the instructions here, however they do assume that a disk is stuck in the drive.
    Matt

  • Qosmio G10-133 Question about DVD COMBO Drive replacement

    Hi
    my laptop has a DVD driver labled UJ-830B but the device managaer reports that it is a UJ-830S. I have posted before saying I haven't been able to burn DVDs. It gets part way through then errors out saying unable to burn. I have used various software and disc makes but all to no avail.
    I purchased an external burner which burns no problems, however it does defeat the object of having one built into the lapotop!!!
    Can anyone suggest a suitable replacement drive? I have already tried an NEC 5540A drive, but my laptop didn't recognise that it was installed. I assume it is something to do with Master/Slave?? If the laptop doesn't recognise the drive I am obviously unable to flash any firmware.
    Somebody please help.....

    Hi
    Seems you have already noticed that the drive replacement is not so easy.
    The internal notebook drives dont support any jumpers like the external drives for desktop PCs and the settings are fixed and in my knowledge not changeable
    I found some compatible drives numbers but unfortunately, I did not find the drive names.
    It seems this are any internal part numbers.
    DVD Super Multi Drive
    - MATSU****A (G8CC00021610) UJ830
    - MATSU****A (G8CC0001S610)
    DVD Super Multi Drive (supporting Double-Layer)
    - MATSU****A (G8CC00021611)
    - TEAC (G8CC00024611)
    However, the service partner could provide you a information about compatible drive.

Maybe you are looking for

  • Mail.app crashes when opening the 'message viewer'

    Since yesterday Mail.app is not working anymore. I can open the application, but whenever i try to open the message viewer, the application crahes. I can open all the other windows. I've run all the updates with no success. I'm using OS X 10.6.8 and

  • How do I set up WRT54G router with 4 computers and WVC54GC Wireless Camera

    Can anyone please tell me how to set up my Home Network with full security turned on? I have at least 4 neighbors that show up on my wireless connections list. I have a daughter that loves music and is constantly downloading viruses but only on one w

  • How to display more than 255 chars in background job with ALV Grid ????

    Hi All, I am using ALV grid with OO. I have used call screen for ALV grid display. I have to display more than 255 characters in width. While running it, I can see the list perfectly. But in background mode, the list is truncated after 255 chars. Can

  • Application server issue

    We have around total 60 users and 20-25 concurrent users for Hyperion Planning and Budgeting. The customer doesn't want to buy the licenses for the application server weblogic or websphere, rather they want to go on live with Apache Tomcat. What prob

  • Certificates in S60 v3

    In previous Symbian phones running S60, there was a file c:\system\data\CAcerts.dat where root certificates etc are stored. Has this changed in Symbian 9.1 / S60 v3 / Nokia N80 etc?