CD/DVD Drive no longer reading discs

HP Pavilion g6-1b50us Notebook PC
Windows 7 64-bit
I've only had my laptop about a month and a half. To transfer items from my old laptop to the new one, I used the CD/DVD drive to copy items over. It worked beautifully at that time.
Tonight, I went to install a new program I just received. Its on CD-ROM. I placed it in the drive, it popped up with the "run or open" prompt. Pretty straight forward and normal. I clicked run/install and... the drive started making noises like it was either off balance or hung up or... something. After waiting much longer than it should have taken to read the disc, I just clicked the button to open the drive (and essentially cancel the install). No problem, the disc slowed like normal and the drive popped open.
Hmmm... So I did a reboot. Tried again. The run or open prompt came up. I canceled it this time, and went into the computer and right clicked the CD/DVD drive (where it showed the proper title of the disc) and clicked open. IT made the weird noises again and... nothing. I closed out the computer prompt, tried to open the drive again to stop it, and this time i had no luck. It just... sat there. So I ended up doing reboot.
Reboot. Got the disc out. Decided to try the disc in a different computer. Maybe I got a bad program. Nope. It worked like a charm, ready to install elsewhere.
I went BACK to my HP, tried the disc a third time. This time... nothing. No prompt. I went into Computer. No CD title in the CD drive. I clicked on it, and it started spinning (again making the weird hung up/off balance noise) and eventually came back saying there is no disc in the drive.
My various steps to fix things have included:
-- making sure all the drivers, BIOS, etc. updates are installed. All are up to date.
-- Did a system restore point a couple weeks back to see if that helped. No luck. Undid the restore point.
-- Microsoft Fix-It thing. Couldn't do anything because it would never read that there was a disc in the drive in the first place!
-- Did HP System Troubleshooting. Same problem as the Microsoft Fix-It EXCEPT when I used a blank CD-R.
-- Eventually did get it to also read a DVD-R disc. Seems willing to write to disc, but not read???
-- Uninstalled the DVD/CD drive in Device Manager. Let it reinstall the drivers on its own.
-- I've tried an audio CD, a video DVD, the program I am trying to install, and the blank discs. The only things it will read now if the blank discs. (And even then, it takes a few minutes to do that.)
In device manager, it is listed as "hp DVDRAM GT31L SATA CdRom Device."
I'm at my wits end. ANY suggestions I've not tried? Frankly, I NEED to install this program to do my job. This needs to be fixed, like, yesterday.

It is a bad piece of hardware. You have eliminated all other possibilities. You need to replace the optical drive. In the meantime you can install the software across a network by making the optical drive on another computer within the network shared and access the files on the disk from the laptop. Or you can get a usb dvd drive or you can copy the contents of the cd onto a flash drive and install from there.

Similar Messages

CD/DVD drive no longer reads music CD's after 10.5.6 upgrade

After going through the 10.5.6 upgrade, the MATSHITA DVD-R UJ-857E on my 2.16 Intel MacBook is no longer recognizing music CD's. Bought 3 new CD's just before upgrading and they aren't recognized now, as well as older CD's I own. DVD's and software CD/DVD's seem to work fine however.
Any ideas on why and how to correct the issue? Is there a firmware update for the Matshita DVD drives used by Apple?
Thanks in advance
Joseph
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZB0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds

My G5 iMac was doing the same thing in the early months of 2008, and it wasn't till June that I discovered the drive itself was going bad. I could burn a disc, and when it finished, it wouldn't mount. I would reboot, and while the disc would then mount, the iMac said it was not the proper format. (Even though it was just burned on the Mac).
A new drive eliminated this problem, so I would ask, how old is your computer?
Mine was a little over two years old when it started this, and it took four months to completely die on me.

Equium L300 CD/DVD Drive no longer reads disks

There is already a thread with a similar problem to this with a different model, but it seems to have died.
The CD/DVD drive on my Equium L300-148 now refuses to read disks. It seems to burn them still, which is strange.
That must mean the laser has not burnt out, and the drivers seem to be working correctly.
I can see the drive in Explorer and I can eject it with the context menu.
I have tried a "Disable" then "Enable" in the Device Manager, but I have not tried uninstalling the drive then restarting.
Any help would be apreciated.

Hello
To make things clear: there are no much options you can try. You can try to remove optical disc drive from device manager and restart the notebook. The drive will be recognized automatically and the drive will be ready for use.
Can you tell us more about this issue?
Which formats you have tried to open? DVD movies, music CDs, different data files?
Is there some error message?
If you don't have external HDD you can save all important data onto empty DVD medias.
Of course the best way to check functionality is to set factory settings again, but if you don't want to do this it makes things more complicated.
What you can do is to contact nearest service provider. They can install recovery image on separate HDD and test the functionality. If there is some serious problem the drive will be replaced for free (if the warranty is still valid).

MacBook CD/DVD drive won't read disc

I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
Is there a way to use Terminal to force it to read my data on the disc?
Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

DVD Drive Having Issues Reading Discs

Hi there,
I have 2 MBP's (original and unibody model) and an iMac. However, the computer having the issue is the original MBP as listed below. I barely use the DVD drive but I thought I'd treat myself to the Sims 3 only to find that the DVD drive keeps spitting it out and 3rd time was lucky but then repeat over and over. It makes a noise like it is failing to read it properly. I thought it might've been a dodgy Sims disc so tried in my unibody and it works perfect.
This is not the only time I've had issue with it though. When it was still in warranty it would be very picky with certain DVD movies and the picture would freeze/randomly skip/not play at all. I did send it off to repair but as it works perfect with other discs, they couldn't find a problem and nothing was ever done about it.
I've just put in an audio CD I bought at a gig (so assume it was written on blank media) and the computer is saying it is a blank disc when it is not.
I dropped my laptop and it was sent in for repair a few months ago, they checked everything (as it was obviously dropped) and again, found no fault with CD/DVD drive (although the problems originated before it was dropped anyway).
Is there anything I can do my end? Resetting or something? If I send it in again it will cost me money as now out of warranty and I feel they will just tell me they cannot find a fault, again!
Thanks for reading,
-Lisa

Many people will recommend a lens cleaning disc first, cheap and easy if it helps. Otherwise, I would consider replacing the optical drive, which a careful person can install themselves with online instructions. The replacement drives are less than $100USD. These drives often seem to get dodgy.

Hp pavilion cd/DVD drive won't read discs

My pavilion G6 G6 2295sa won't read cd/DVD but will play DVDs with cyber link I have gone through the suggested routes when I put in the error code E:\hp DVD-RAM UJ8D1 H.01 please help.

Hi Primhak,
Welcome to the HP Forums! I need to clarify a couple of things the optical drive (CD/DVD drive) is playing DVDs but won't CDs is that correct? What is this error code that you are talking about? What operating system are you running?
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Dvd drive won't read disc recorded on dvd recorder

Hello,
When a DVD that has been recorded on a stand alone DVD recorder is inserted into my computer a message appears on the screen that reads, the disc inserted is blank. Also, the disc does not show as an icon on the desktop or sidebar. The disc plays on other machines without fail. HELP!!!!!!!
J.DeMonte

Hey I had my mbp for about a week before I put in a disk. The second I stuck it in a knew something was wrong seeing it shook my entire desk. I took it in and they repaired the 400 part and now it works fine.
Your problem was one of my symptoms so take it in. They will check it out. They knew mine was messed up as soon as they tried to burn something. I was covered by warranty I hope you are.

MacBook CD/DVD drive won't read discs

I have just updated the new OXS 10.9 for my Macbook Pro. Then I found that I insert the discs, the drive makes the repetitive 'hunting' sound of a drive that can't recognise a disc. It will eventually give up and eject the disc.

I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

My notebook's cd/dvd drive won't read discs.

I checked the drive's properties in the device manager and it says "its configuration information (in the registry) is incomplete or damaged. (Code 19)". how do i fix this?
I'm running vista home premium on a pretty new pavilion notebook with a blue ray player (if that makes any difference). its only about four months old, I got it right around christmas.

Hi,
First, try the automated fixit from Microsoft on the link below.
Vista
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

G60t-200 CD/DVD drive won't read XP discs

I recently re-installed Windows 7 Home Premium after I had a blue screen crash forcing me to re-format the hard drive on a g-60t-200. I've installed all the recommended Windows updates as well as all the HP updates for the g60t-200 model that I have but now the CD/DVD drive will not read the files on older discs that I burned using Windows XP on another machine. It shows the disc in the drive and shows the folders on the disc but when you open the folders, the files are not visible. When I right click and open up the properties of the disc while it's in the drive it shows it as "UDF" format. The other machines in the house running Windows XP can read the disks just fine and show all the files. Is there an update or driver I'm missing that will allow the drives to read the files on discs burned using Windows XP?

Hi sherifawad, and welcome to the HP Forums!
I understand that after restoring your computer, you can no longer read CD/DVD's that were burned on XP with the Windows 7 operating system. I will try my best to help you resolve this issue. I suggest that you make sure that you have the latest service pack for Windows 7. Here is the Service Pack and Update Center for Windows.
I am including this document for Using HP Support Tools to Update HP Software, Drivers, and BIOS with Windows 7.
I hope this helps, please let me know how it goes.
Thank you,
I worked on behalf of HP.

CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated

This is usually a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

CD/DVD Drive is not reading any discs on Equium A100

My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

Hello,
Here are a few windows articles that could help.
http://support.microsoft.com/kb/891894/en-us
This one might do the trick, if not try this one.
http://support.microsoft.com/kb/826510/en-us
Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

Hi, My dvd drive ad7586h doesnt read any discs, though diagnostics report fine functionality.plsHELP

1. HP probook 6550b
2. Win 7 Pro 64 Bit (original since bought)
3.DVD drive ad7586h doesnt read any discs, but device manager and HP support assistant report this device to be wortking properly..
4. not aware of any..

Hi,
Please try this:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

Have you revieved this support document?
TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

Updated to Mavericks:cd/dvd drive no longer works since update. How do I fix this?

I updated my macbook pro with the Mavericks update last week. Since then, my cd/dvd drive no longer works.
It worked until I did the update. How do I fix this? Can I delete the update and if so how do I do that? or
is thiere a fix for this?

1. Reset PRAM. http://support.apple.com/kb/PH14222
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

CD/DVD Drive no longer reading discs

Similar Messages

Maybe you are looking for