CD/DVD Drive Randomly Pops Open

My CD/DVD drive keeps randomly popping open. Usually right after I turn the laptop on and randomly from there on out.
hp pavilion dv6-7043cl entertainment notebook Windows  7, 64-Bit
No error messages. No changes to the system have been made.

Hi,
Is your notebook still in warranty?
Your description of the problem sounds like a failing CD\DVD drive.
Best regards,
erico 
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Portege R935-ST3N02 with Windows 8 DVD Drive won't open and doesn't appear in Explorer

    I have seen posts concerning this problem under Windows 7, but my new laptop came with Windows 8.  The button on the DVD drive will not open it.  I can force it open using the paper clip hole, but the computer does not recognize any CD or DVD that I put in the drive.  Anyone have ideas on what I should do?

    Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
    If that doesn't work, check if it's listed in the Device Manager.
    Windows key + x > Device Manager > DVD/CD-ROM drives
    If it is listed there, try right-clicking it and selecting "Uninstall." Then reboot your computer and see if it works.
    - Peter

  • My dvd drive won't open so I can insert a disc.  It has opened in the past by pushing the button on my mac

    I can't insert any dvd's because my dvd drive won't open when I push the open key.  It has always worked in the past.  Any suggestions on how to fix this?

    It's possible there is a CD/DVD in the drive that's stuck. Open Disk Utility in Applications/Utilities. Do you see a CD/DVD in the drive? Try ejecting using unmount.
    If that fails, restart and hold down the mouse button whe restarting.
    Other links:
    Kappy's Five ways to eject a stuck CD or DVD from the optical drive https://discussions.apple.com/thread/4795807
    Ds store's suggestion:  Reboot the computer holding the option key down, wait for the boot drive options to appear, then press the eject key on the keyboard. When it's out, then select your boot drive and click the arrow key to boot up.
    http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD
    Hope this helps!

  • E440 CD/DVD Drive Won't Open

    Hello. I bought a Thinkpad Edge E440 and it came yesterday. However the CD/DVD Drive won't open. If it do the paperclip trick, it will, but when I press the button it just makes a few noises and then nothing, if I right click the drive and press eject, same result. Any suggestions please?

    reliablepctechs wrote:
    obtain a paper clip, straighten it out and insert it in the small hole found on the bezel of the cdrom drive.  Doing so mechanically releases the drive...
    take reasonable care in doing so....insert it about an inch or so
     I saw that you posted the suggested paper clip trick as a solution, but it does not work for me. my machine is a new (2011) hp. i do not think it matters that it is a bluray drive. any other hints would be hugely appreciated

  • My CD/DVD drive will not open

    My CD/DVD drive will not open when I insert any type CD/DVD. The CD/DVD just runs but will not open.

    Try cleaning the lens:
    Use a DVD lens cleaning disk.
    Use a few shots of compressed air in the slot.
    Wrap a fine microfiber cloth (eyeglasses cleaning cloth?) around a business card and gently insert it in the slot.
    If no success, a trip to the genius bar at an Apple store is the best option.
    Ciao.

  • DVD drive will not open

    I have just now set up my new HP Pavilion p7-1110 - the DVD drive will not open.

    Hello Melly,
    I would like to assist you with some information I have found about this issue and give you the in's and out's of your issue. The link below will give you different ways to get your dvd drive open:
    http://www.computerhope.com/issues/ch000214.htm
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    >>>>>>Please click Kudos, if this information has been helpful >>>>>>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  • My DVD drive won't open when I click the button

    Hi there
    I'm hoping someone can help me.
    My DVD drive won't open when I click the button.
    I've tried clicking on eject on the DVD Drive icon in My Computers and it comes up with an error message.
    I think I deleted cookies the other day. Could that have anything to do with the problem?
    Any help would be greatly appreciated as I really don't want to send my laptop away to a technician.

    Hi
    Try to open the CD/DVD drive manually.
    Near the eject button you will find a small hole.
    You could use a small object like staple and could push it carefully into this hole.
    Usually this should helps to open the drive manually.

  • Satellite L500-126 - CD/DVD drive does not open very smoothly

    Hi,
    I just got my second Satelite L500-126.
    I exchanged my first one for a new one because the ESC key got stuck sometimes and made a squeaking sound.
    Now with my new one, I noticed that my dvd drive does not open very smoothly and 2 little silver metal bars come out with the drive when I open it.
    Is this normal?
    Also, when I close the dvd drive i hear a little "ping!" sound.
    Like a spring or something. Is this also normal?
    Thanks in advance.

    Hi
    Im not quite sure what you mean by 2 little silver metal bars but my notebooks drive contains two metals (runners, trackage).
    This is normal and these parts are important to ensure that the drive could eject properly and could stay in right position.
    You will always hear an short click opening and closing the drive.
    So I assume this is ok.

  • TX2 DVD Drive Won't Open

    I bought the Tx2  2 days ago. I had the keyboard stop working on me and was able to get that fixed. Now the dvd drive won't open. When I first boot up the LED light flashes, letting me know that there is power to it but whenever I push the open button, nothing happens. I have tried ejecting it from the drive icon inside of windows explorer and media player.
    I bought this so I could watch movies during my 2 1/2 hour commute so if I can't get this drive open I will be returning it.

    Is there a small paperclip-sized hole on the front of, or next to, the drive? If so, you can put a paperclip in there to manually eject the disc drive.
    Is the drive showing up in the "Computer" explorer window?
    Also, try going to Device Manager and see if the drive is listed or in an error state.
    "A riot is the language of the unheard." - Dr. Martin Luther King Jr.

  • CD/DVD drive keeps on opening and closing automatically.

    Hi, I just got my computer today and hooked it up.  The first time I hit the 'power' button after having everything hooked up, the CD/DVD drive started making this clunking noise and then procceded to open and close, open and close numerous times.  Since it was the first time I had turned on my PC, I let it go until I had Windows set up and etc.  After I had Windows set up, I restarted my computer and it did the same thing.  It would make the clunking noise and on my screen there would be a blinking _ until I came to the login screen. 
    Anyone else have this problem with their BRAND NEW, first time turning it on, PC?

    Well it just keeps getting better... the other HP, I bought does the same thing!!!! both the same model... but I bought 2, one for home and one for work..
    I decided to setup the one for work at home... so I took it out of the box just now... fired it all up and lo and behold... the CD DOOR just popped open... then closed... then opened... then closed.. then finally stayed open.
    I look at the post, that said maybe the "plastic front bezel" thingy was pushing against the button.. but it is not.
    I removed the side panel.. then in the front, i pulled back on the 3 tabs that hold the front bezel on, and removed the bezel, then started the computer, and tada.... the door STILL OPENS AND CLOSES...
    And when the door closes... the "sound" it makes, and by looking at the drive.. is like, it goes in, then makes a sound as the CD DOOR tries to come out a little bit... then goes back in, like 1/8th of an inch... then opens completely..
    WEIRD...
    An obivious problem with HP's choice of CD rom drive....
    Anyone else???????

  • DVD drive won't open

    On my HP pavilion loaded with vista, the DVD drive will not operate.  When I try to open the dvd drive in computer dialog box, with a data or software dvd in place, it ejects the disk and requests that I insert a disk.  
    I would like to determine whether the drive must be replaced or not.

    Hello roget77,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues with your DVD ROM in your computer running Windows Vista is not reading or recognising discs and you would like some assistance. I am providing you with an HP Support document: Drive Cannot Read Discs (Windows Vista), which has steps to troubleshoot the very issue you are describing. I would recommend that you review and follow the steps set out.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • CD/DVD Drive won't open

    I have a ideacentre k410 that I just received as a gift brand new in box from best buy, the only problem is that the DVD/CD drive will not open and I cannot find a manual "eject" button anywhere to see if something is stuck in it. Please help!!!!!!

    goto my computer or windows explorer and click folders at the top and then in the left window panel and right click dvd rom and eject
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • DVD drive won't open... no way to open it!!!

    My problem is that if I press and hold my eject key on the keyboard the eject symbol shows up and fades away on my screen, but the drive will not open. I pulled down the metal cover and was going to try and stick a paper clip into the hole next to the dvd tray, but discovered that there is no hole. I've restarted the computer holding down the mouse button, and i've restarted the computer holding down the eject button to no avail. I've even tried ejecting in Toast and I get NOTHING! So what do i have to do to get the stupid tray out? Pry it open with a crowbar, or maybe blast it open with some C4?
    Here's what I have:
    Hardware Overview:
    Model Name: Mac Pro
    Model Identifier: MacPro4,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 1
    Total Number Of Cores: 4
    L2 Cache (per core): 256 KB
    L3 Cache: 8 MB
    Memory: 3 GB
    Processor Interconnect Speed: 4.8 GT/s
    HL-DT-ST DVD-RW GH41N:
    Firmware Revision: PQ05
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds

    Hi,
    Just a thought, the ATA cable may be loose or disconnected, if this is the case you'll just need to plug it back in. - Otherwise I'm guessing the drive is dead.
    Here's a link to the manual for how to install the drive, check that the cable is in place. (refer to pages 42 - 46)
    http://manuals.info.apple.com/enUS/Mac_Pro_UserGuide.pdf
    Regards,
    Peter.

  • My cd/dvd drive does not open

    I just bought a Macbook pro and tried to open the cd/DVD drive by pushing the eject symbol on the keyboard but nothing happens. I looked on the Internet and someone suggested to restart the computer and hold the eject symbol, I did that and heard a noise like if it wanted to open, but it didn't. I was assured when purchasing this macbook that it did contain the cd/DVD drive since originally I had purchased the macbook air. Please help, need to install programs for school.

    Nikki0684 wrote:
    I just bought a Macbook pro
    You are still under warranty.  Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - You have the standard one year Apple warranty.
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

  • MacPro 2007  DVD Drive won't open

    Lion 10.7.4
    Pressing the Eject key on the keyboard does not open the DVD tray.  Usually the Eject symbol appears briefly on the screen and then the tray will extend.  But, this is not working at all.  I've reset the PRAM, but still the problem persists.
    Going to About this Mac shows that the system "sees" the DVD drive, I just can't the the tray to extend.  There is no DVD or CD in the drive at this time.
    Any suggestions are appreciated.
    Thanks.

    Hi Galb:
    Sometimes the best solutions are the manual ones.  There is a mechanical fail safe built in to these devices,  I have had to use this method several times myself, so ....
    .....   Try this:
    1) Power off your mac pro.
    2) With your finger, pull down the metal bezel on the affected drive.
    3) You should now see the front plastic bezel on the affected drive, it is usually black or grey.
    4) Look for a small pinhole somewhere on the front. It will have a very small diameter, about 0.5mm.
    5) Yes it's there, all cd/dvd drives have one!   Note: a small flashlight comes in handy here.
    6) Straighten out a standard paperclip for about 2 -3 inches.
    7) Insert the paperclip in the small hole and push, you will have some resistance, and then the drive tray will slowly push out about 0.5 inches or more.
    8) Grab the tray and pull it out slowly!!
    9) You are done!
    10) If you do this gently you won't hurt the drive. Boot up and the tray should automatically slide back in. You are good to go.

Maybe you are looking for