CD/DVD Drive software needed for Satellite A210

Where can I download the drivers for the cd/dvd drive for my A210 laptop I checked the drivers download page on the toshiba website but there's nothing?
Thanks for any help

The ODD driver is a part of the Windows OS.
The Windows uses the common Microsoft driver and therefore there is no driver on the Toshiba page.
But why you want to install such driver?
Isnt the CD/DVD drive listed in the device manager?

Similar Messages

  • Where do I get the driver/software disk for Satellite A500/02J

    Hi,
    Newbie here, just want to ask, Is there a driver/software disc for the Toshiba A500/02J Notebook.
    I just bought a new one, and its been formatted, so no recovery partition where the drivers would be.
    I have trawled the net looking for face recognization software, etc, but to no avail.
    There must be an installation disc out there some where..........
    Can anyone help a newbie?
    Regards
    Carl

    Hi
    The notebook was not delivered with the recovery disk because there was a preinstalled tool called Toshiba Recovery Disk Creator.
    This software would create the Recovery disk which helps to set the notebook always to the factory settings.
    By the way; the Satellite A500/02J is a Toshiba Australian notebook model and the drivers should be available on the Toshiba Australian page:
    http://www.mytoshiba.com.au/home
    Greets

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

    Driver files needed for the following Sony dvd/cd rom drive:  "dvd-rom  ddu 1615". 
    The dvd-rom drive will not read any type of dvd or cd.
    desktop computer:  Dell Dimension E310 , windows xp, service pack 3.
    This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.  
    Where can I find driver files for this dvd rom?
    Thanks,
    Denise

    Hello Denise,
    Welcome to the Sony Community.
    All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
    • Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
    • Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
    service, storage support email
    • Please remove your secondary IDE channel from the Device Manager.
    If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
    Thank you for your post.

  • How can i no which SATA driver do I need for Satellite L300-03C

    How can i no which SATA driver do I need for Satellite L300-03C so i can do nlite

    Hi
    Your notebook seems to be a Satellite L300-03C PSLB8C-03C01X.
    As already suggested in your first thread visit the Toshiba Canada page and choose this notebook model on the driver page.
    http://209.167.114.38/support/Download/ln_bymodel.asp
    Then download the Intel Matrix Storage Manager (SATA) - Floppy drive image. Its for Vista but the files in this package should work with Win XP too.
    Include these files using nLite in order to create new Win XP disk containing the SATA drivers.
    Finally use this disk for booting.

  • There are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN

    In 2010 there are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN
    In archive: http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp
    They compatible for Satellite A210-1AO, Part Number: PSAELE-03Q009G3 (BIOS version/date TOSHIBA V2.0, 2008.06.10)?

    1. When I press power button notebook and OS start as usual.
    2. When I press power button and after I turn PC to BIOS mode, PC is crashing (shortly).
    3. So, I checked using standard OS tools hard disks for errors (errors was on disk where OS and all software installed. All errors was fixed).
    4. After I started using standard OS tools (Start from: BIOS->System start from CD-Rom with tools on CD) RAM memory test.
    5. On stage Test All Memory PC crashed. (No any dumps/logs left in the system about crashing).
    6. Now I need to do some physical manipulations. Ill have check each memory module. And I don't know how looking my motherboard, what is where on it. Where I can see scheme with details, names and elementary explanations (what is what)?
    Im not sure, but motherboard should be IALAA..?

  • Is it Possible to change the DVD drive to Bluray for HP Pavilion dv6-6176sx

    Hi All,
    Is it Possible to change the DVD drive to Bluray for HP Pavilion dv6-6176sx Entertainment Notebook PC?
    Thanks
    This question was solved.
    View Solution.

    Sure it is not even very difficult. Do you just need a BR reader or a burner/reader? The replacement disk drive will be $80-120 or so, maybe a bit less. You can find them on eBay. You can use a generic one but that may require some reworking of the faceplate or just get an original dv6-6000 BR drive on eBay. Swaps out with a couple screws on the bottom; slide out and slide in the replacement. You will need new software to play BR movies, of course.  
    Post back with any questions

  • Software needed for the USB device, "USB Interface Controller TEST2.0"

    My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
    I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
    Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
    "Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
    I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
    "Software Update is not able to connect to the Internet. Please check your configuration and try again."
    I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

    Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
    From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
    In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
    I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
    Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

  • Which is the software needed for an installation on a production server

    Hi,
    which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
    I mean the old 10g stand alone forms and report service but un 11g release ..
    Regards

    For application deployments (production), you will need the following software. The same is true for a design-time environment.
    1. Weblogic Server 10.3.2
    2. Fusion Middleware 11.1.1.2
    See my update in the following:
    Re: Some FORMS quesion...
    All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

  • Need driver for Satellite A210-12Z PSAEGE

    Hi Folks,
    i need your help. I'm looking for WinXP Driver for this Notebook but didnt find anything from Toshiba.
    I tryed to install the Omegadrivers for the Display and the VIA Allinone Driver package for the chipset, but it does not work.
    Can someone tell wich chipset is installed on the Mainboard and which Graphic Card is used in this Model?
    Thanks in advance.
    Timo

    According the notebook specification Satellite A210-12Z has follow hardware:
    Chipset: AMD M690V
    CPU: AMD Turion 64 X2 mobile technology2 TL-52
    Graphics Controller: ATI Radeon X1200
    I hope this info can help you.
    Bye

  • Need help with drivers for Satellite A210-186

    Hi,
    I have a Satellite A210-186 and i can't find drivers for Windows XP. Can anybody tell me where to find drivers for XP?

    Hi,
    if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
    But I think they should update the section soon and make the drivers available for us..
    Greets

  • Need XP drivers for Satellite A210-12Y (PSAELE)

    Hi,
    I'm a young professional and I have the need for using Windows XP to work since Vista isn't quite as reliable. Unfortunately I noticed that the drivers for said OS were not yet released (with my disappointment) on Toshiba's website.
    Could you please give me some indication on how to solve this problem? Or shall I just wait for the release of said drivers from the main website (hoping this happens any time soon)?
    A210-12Y PSAELE (00V00TIT)
    Sincerely

    Hi mate,
    you have two options:
    1. Collect the drivers from the internet by the hardware manufacturers, for example: chipset is from intel -> go to www.intel.com and download drivers from there, graphics is Nvidia -> go to www.laptopvideo2go.com, sound is a realtek chip -> www.realtek.com and so on. Do you know what I mean?
    2. Wait until toshiba releases the XP drivers for this model type. I dont when but it would be there when its there. ;)
    Greets

  • Satellite M70 replacement DVD drive advice needed

    Hi
    The Mat****a US-841s DVD drive in my M70 has expired.
    I would like to replace it with a Sony Optiarc, but I notice it says operating system Vista and I've got XP Home.
    I have spent hours researching this and I can't find a drive that's compatible, can anyone tell me if the Sony is ok or recommend a suitable alternative?
    I don't want to fork out money and then have lots issues I just want it to work straight out of the box although minor fiddling isn't a problem..
    Any advice greatly appreciated.

    Hey Andy,
    I dont know if the other drive that you mean will working in your Satellite M70 but I would recommend checking the user manual of your notebook. There you can find a list of compatible drives they are pretested. You should find this information on the first pages I think.
    Check this!!!
    The point is that not all drives are compatible with all notebooks so you should buy a pretested drive.

  • Question on reinstalling DVD media software on a Satellite A100-049

    When I first ran the System Restore on my Toshiba laptop it put these two on but I can see no way to reinstall them without restoring the entire drive back to when I first bought it. I still have WinDVD installed but have removed Ulead (I forget the exact name of the DVD Media software) and cannot now re-install it.
    Would Toshiba send me a proper installation CD for these?
    Thanks

    Thanks. I was thinking that.
    There's nothing wrong with the actual disc as far as I'm aware. There just appears to be no obvious menu when you run it from Windows. It restores perfectly fine. I wasn't sure if Toshiba would send me "normal" CDs for this software. I'm not after anything more than I get anyway.

  • What CD/DVD drive is compatible with Satellite 1400-103

    Hi
    I Have Been Looking For A Replacement Dvd Rom For My Toshiba Satellite 1400-103 and I can't Find Any one.
    Due To It Been So Old So I Just Wondering If There Are Other Compatible Dvd Drives That I Can Buy For My Laptop?
    Thanks

    I think this CD/DVD drive could be compatible:
    - Toshiba SD-R2102
    - Matsu****a UJDA720**
    - TEAC DW-28E**
    - Toshiba SD-C2502**
    - TEAC DV-28E-B34
    - Hitachi GDR-8081N-ATAB**
    All this drives I have found in the user manual for the Sat 1400-103
    PS: User manual can be downloaded from the Toshiba page too ;)

Maybe you are looking for