CD/DVD Drive will Not read CD/DVDs

This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!

Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.

Similar Messages

  • Help :( DVD Drive will not read Blank DVDs but movie and data DVDs ok.

    I am at loss what to do. Whenever I put in DVD with media in it (including +R), it plays and reads it all just fine. CD data reads no problem too. However, when I put in a Blank DVD, it chugs and ejects it out completely.
    Preferences are fine. It says 'Ask What to Do' is set when 'You insert a Blank DVD'
    Here was how it started. Previously, I could put in a blank DVD and it would be just fine but I'm having problems burning after the 10.5.6 update. Read in a post somewhere to try resetting your PRAM which I did and now it won't accept the blank DVDs. Everything else is fine.
    I know a lot may say it's a bad batch, but I bought a new batch, Memorex vs. Verbatim and nothing.
    Would really appreciate ANY help I can get!
    Hardware Overview:
    Model Name: MacBook Pro 17"
    Model Identifier: MacBookPro2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 4 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP21.00A5.B08
    SMC Version: 1.14f5
    Serial Number: W86*
    Sudden Motion Sensor:
    State: Enabled
    MATSHITA DVD-R UJ-85J:
    Firmware Revision: FAV1
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    < Edited by Host >

    Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
    I'll give it a shot in a few hours

  • Imac dvd drive, will not read games disks

    imac dvd drive, will not read games disks whilst running in windows 7, cd and film dvd run ok. Can not believe Apple care who told me I cannot run pc games on iMac EVEN under windows 7. Any help please.

    Zap the PRAM and Reset the SMC, then try again.

  • HT2801 My DVD drive is not reading any DVD

    My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

    Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

  • DVD drive will not read DVD-Roms

    I recently tried to reinstall a game that I had played previously, only to find that my drive will not read it. I can hear the disk spinning, but my computer will not recognize that there is a disk in the drive. I tried some of my other games and I noticed that all of the older games, that ran on CD-Rom, had no trouble installing, while the ones that ran on DVD-Rom never showed up in the drive.
    This is strange because I have installed all of these DVD-Rom games on my laptop before with no problem. I've tried doing simple fixes, like updating everything and uninstalling then reinstalling the drivers, but nothing helps. 

    Hi,
    If it worked before then try few System Restore points and check. Could have happened due to some update.
    Also provide the Product number of your notebook if restore doesnt help.
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Why my dvd drive will not read or run any install software,

    after i did my system recovery my dvd drive will not load or run any software, need somE HELP

    will the drive read cds? If the ODD will read the cds then it maybe a update will fix it. If it won't read those too, you may need to get a new ODD (dvd drive). 

  • CD/DVD drive does not read all DVD formats and regions

    Hi
    My Teac-dw-224e-a does not read all DVDs formats and regions.
    It does read CDs but no DVDs at all.
    Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
    I have reinstalled the driver and also tried with different software.
    What can I do?
    Please help!

    Hi
    It is possible that your DVD drive has wrong region settings.
    In this case it is not able to watch all possible DVD movies from different regions.
    Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

  • Satellite A660 - DVD drive will not recognise some DVDs

    I have a new Satellite A660-17E with a HL-DT-ST DVDRAM GT30N drive, running Windows 7 64 bit.
    The drive will read most DVDs. Commercial DVDs (region 2) are fine. However, there are problems with DVDs recorded using DVD recorders. DVD+R recordings using a Philips machine work fine. DVD+R and DVD-R using a Sony HDX RDR 1095 machine do not work.
    I'm hoping that the drive is ok and that this issue can be resolved by adjusting some setting or other?
    Any ideas?

    It is most likely the issue is with the brand of dvd's you record with. as stated in the manual not all brands of recordable media are guaranteed to work with the dvd drive.
    Also the sony recorder, i had a similar problem when playing the recorded dvd on another dvd machine, i found by adding a little more recorded info from the other machine onto the dvd it played fine after that. If you use DVD+R on the sony , record something on the laptop to the same dvd and then see if the dvd will play on the laptop.

  • GX660 DVD drive will not play video DVDs

    For some reason the DVD drive in my GX660 refuses to recognise video DVD discs.
    DVDs with binary data and audio CDs will be read fine, but inserting a video DVD --any video DVD-- just results in an enormous amount of seeking sounds from the drive before Windows 7 finally gives up on it a reports the drive as empty.
    I've had the GX660 for just under a year, during which time the DVD drive has been used very sparingly -- maybe for the installation of no more than a dozen programs.  Never been used for burning DVDs or CDs. Never been used for reading video DVDs which is why I discover it at this late date.
    Any ideas concerning this issue, before I turn in the laptop for service?  I'd rather not have to.

    In your shoes I'd contact MSI and see if there's a firmware update for the drive to correct the issue. >>How to contact MSI.<<

  • DVD drive will not recognize blank DVDs after upgrade to Lion.

    It finds burned DVD/CDs but not blank ones. Disk utility partially sees blank dvd, gives option to eject it, but will not allow eject it. Finder does not see it at all. have to restart to have it eject. Tried different DVD's (Manufactures and -R / +R, etc). Have followed recommendations on resets and have even reloaded the OS.  This problem started immediately after upgrade from snow lepoard to lion.

    Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
    I'll give it a shot in a few hours

  • MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

    Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
    1. I am unable to read all DVDS in it some DVDS work while others do not
    2. I am able to read all CD's, but while burning a CD i am prompted with the following message
    " Unable to caliberate lazer power"
    3. Kindly assit me in solving this problem
    regards

    Hi
    Four thoughts
    • Brand and type of DVD/CD Media
    • Burn Speed ?
    • Ever used a Cleaning DVD ?
    • Free space on Main Start-Up Hard Disk ?
    Brand and type of DVD/CD Media: MATTERS
    - Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
    I only use Verbatim
    - DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
    I only use DVD-R
    Burn Speed (in iDVD or alike): Matters
    • Best or Max - is not best
    I set it down to x2 or x4 Max
    Ever used a Cleaning DVD ?
    I use one WITHOUT Liquid but with brushes from time to time
    Free space on Main Start-Up Hard Disk ?
    - Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
    I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
    Yours Bengt W

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • Dvd drive does not read dvd but reads cd only.

    my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
    This question was solved.
    View Solution.

    It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
    608141-001
    Above is the part number for the DVD burner drive. I could not find one on eBay.  Here is one online:
    http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
    Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

  • I have just put iCloud on my computer this week.  I have had multiple issues with it and my computer not working.  Thought I worked most of the bugs out with updates etc, but now it will not read my dvd's or audio books.  Why is this?

    Not sure what to do?  My disk drive will not read my dvd's or audio books.  Was working fine till I upgraded my comp with Icloud.

    I am a very novice user.  Here goesl  I have a MacBook Pro 2.53 GHz intel Core i5.  4gb 1067 MHz DDR3.
    OSX 10.9 

  • CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

    Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
    The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
    I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated  

    This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
    You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
    Manually delete the registry entries
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
    Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
    This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
    UpperFilters
    LowerFilters
    Step 1: Start Registry EditorStart Registry Editor
    Start Registry Editor...type "regedit" into the run box on the start menu.
    Step 2: Delete the UpperFilters registry entry
    In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
    Expand SYSTEM, and then expand CurrentControlSet.
    Expand Control, and then expand Class.
    Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
    In the details pane of Registry Editor, on the right side, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
    If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
    If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?
    Step 3: Delete the LowerFilters registry entry
    In the details pane of Registry Editor, on the right side, click LowerFilters.
    Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
    If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
    Exit Registry Editor.
    Step 4: Restart your computer
    Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

Maybe you are looking for