CD/DVD wont burn. And missing drivers.

My DVD drive stopped burning disks! I have checked the drivers and all are up2date.
And when I was checking my drivers I found some "base system devices" missing. I have upgraded from Vista 32bit to Windows 7 64bit. Any help?
My Spec.'s
Operating System System Model
Windows 7 Ultimate (x64) (build 7600)
Install Language: English (United States)
System Locale: English (United States) TOSHIBA Satellite A215 PSAFGU-058002
PIONEER DVD-RW DVR-K17LF ATA Device

Go here for information about Windows 7 upgrades. Download and run the Software Installer. Hopefully it will find any missing drivers.

Similar Messages

Dvd wont burn movie all the way

The dvd is 4.7 GB and the movie is 4.1 the dvd wont burn the whole movie it stops a little before the movie is over. HOw do we burn a long movie onto dvd?

What is the total playing time of your movie? iDVD 5 has a 120 minute limit, including menus, in the Best Quality setting or a 60 minute limit in the Best Performance setting. The size of the files is not the determining factor, just the playing time.
OT

HT1645 dvd wont burn only message-error multiplexing

dvd wont burn only message-error multiplexing

Read the posts by Bengt Wärleby posts on multiplexing errors in these topics:
HT1645 I was burning a DVD and the...: Apple Support Communities
HT1583 iDVD isn't burning a DVD. It...: Apple Support Communities
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Blank CD-R Wont Burn And Read!!!

I purchase some Blank Maxell CD to burn my music to, but the CD's wont read and it just pop out of the driver. Sometimes a cd might read and it only burn halfway or dont burn at all. So my question is how do i resolve these issues?, And What CD-R brands are good to use with the Macbook?

Go here for information about Windows 7 upgrades. Download and run the Software Installer. Hopefully it will find any missing drivers.

Qosmio G40 - Windows 7 64bit and missing drivers

Hello..i recently upgraded my G40 to win7 64bit and have been very dismayed at all the missing drivers.
so far
1 Cd/hd dvd drive - driver not supported on this product - it was when it was on vista 32 - now i just get cd drive error.??
2 tv tuner - no driver available
3 av controller - no driver available
4 acoustic silencer - no driver available
5 finger print software - installed driver - no hardware found?? it definatly has one ..im looking at it.
6 hdmi control manager - no driver available
7 infrared driver- no driver available
some of these drivers i can do without - (finger print im not worried about 0 but the CD/HD DVD drive is a real problem..
Im normally reasonably fine with installing all these drivers...but it seems there are non there ..or they dont see the hardware....please help.

Wait a moment you are mixing something.
Do not mix CD/DVD driver and HD DVD driver.
When you install operating system optical disc drive must be recognized properly. If you have problem watching HD DVD movies that completely other issue.
So, is optical disc drive recognized properly? Can you use music CDs and watch DVD movies?
If you cannot find Toshiba HD DVD player for 64 bit OS try to use some other players. I don't have HD DVD media and cannot test it for you.
PCI memory controller is maybe cardreader.
By the way, here is the list of all installed stuff on Qosmio G40 (Vista) so you can check if everything is installed and if there is some missing driver. Please note: some additional software is not downloadable.
Windows Vista Home Premium
Intel Chipset SW Utility
TOSHIBA Value Added Package
NVIDIA Display Driver
Realtek HD Audio Driver
Synaptics TouchPad Driver
TOSHIBA Software Modem
Intel 82566MC Gigabit Network Connection
Intel PCI Express Wireless LAN Driver (802.11ag)
Intel Proset?PCI Express 802.11ag?
Intel Proset (PCI Express Kedron Main(abgn))
Bluetooth Stack for Windows by Toshiba
Bluetooth Monitor
TOSHBIA Fingerprint Software
Texas Instruments FlashMedia Driver
Chicony Camera Assistant Software
TOSHIBA PCI TV Tuner
SMSCIR Infrared Receiver Drivers
TOSHIBA SD Memory Utilities
TOSHIBA Assist
TOSHIBA ConfigFree
CD/DVD Drive Acoustic Silencer
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
TOSHIBA Speech System
TOSHIBA HD DVD PLAYER
TOSHIBA SPS Driver
Qosmio AV Controller Manager

DVD Wont Load and Automatically Ejects After Upgrading to OS X 10.5.7

I took the updates last night for 10.5.7 , iTunes, etc, and now when I insert a DVD (data disc burned from the same MacBook Pro and used to work fine), it just ejects the DVD after a minute or so. I rebooted the MacBook Pro, and it still happens. There are no messages in /var/log/system that yield any clues. I set CD & DVD options to "ignore" for music, pictures and video CD/DVD.
This is a huge problem for me. As I said, it's a data disc not a movie, and I need this stuff for work. Any help would be greatly appreciated.

If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
(Removed link because of the way Flash drives the Canon site).
It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
Chris
I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
Message was edited by: 2point5

Data DVD wont burn - error message

Dear Macsters,
Everytime I try to burn a data dvd, i immediately get this message:
BURN
sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D).
It only does this when i set the burn at 1x. At 2x it burns.
I have osx 10.4.8, early g4 17" laptop, superdrive (dvd-r only).
Is this a burner problem or a software problem??
Daniel

Manually setting the burn speed on some applications can be problematic.
If it burns at 2X then my guess is thats what you need to do. Burn at 2X.
http://docs.info.apple.com/article.html?artnum=303599
Cheers Don
Oh one other thing, older burners are very picky about media.
I suggest you use the very best media, rather than bargin basement cheap media.
http://www.digitalfaq.com/media/dvdmedia.htm
Don

Help with X79A-GD45 Plus and missing Drivers

Gday!
Had to do a full wipe and I'm struggling to get all the system drivers back installed properly. I have been following a few other post here that had similar problems but their solutions don't seem to do it :(
X79A-GD45 Plus Intel Core i7 4820K (3...

Hi all,
First of all I am new to the forum wheey
Second of all, I have well a high-end gaming PC, and I just have a simple query?
I currently have a 2-Way SLI with two MSI GTX 980 Gaming 4G, and I don't know whether or not to wait for the Vulkan API...

It's shutting off for no reason, wont burn dvd 1260ux

I have a hp pavilion dv7-1260us and it came with vista but stupid me put on windows 7 which so far was a good thing, I did have a little problem of having to put all the drivers back and that was crappy because I had to put in 32 bit and 64 bit and now my dvd burner won't burn anything, i have the covert dvd x program and i've even tried just burning from the desktop and it gets to the end and says something is wrong or that I need the firmware updated but when I try to run the device manager it says everything is fine, but nothing is fine because it doesn't want to burn and it was fine two weeks ago and then bam out of nowhere it just stops. I tried reinstalling all the drivers, but I can't find the firmware for the dvd burner and now it's just shutting off. I was running World of Warcraft and I thought at first it was hot because the fan came and then it just shut off, and it was long time it was on. But then it died just after an hour of playing. I don't know much about computers so i'm freaking out. I got this computer used but it was still new in the box, the guy was trustworthy, but I"m so dissapointed in this, its' supposed to be a good computer and now it sucks. Help please please....I'm sorry if this the wrong place to post this, I don't know what to do.

I need anykind of help, could it be my computer just sucks, or could it be that the firmware does need to be reinstalled but how come I can't find anything for my blue ray dvd player burner, and why would the computer just shut of playing a game, that makes no sense.

Does someone know when our movie project and finally our iDVD project is done, can we erase the clip that we had imported in iMovie without danger? Or we have to keep the clip in iMovie until the DVD are burn?

Does someone know when our movie project and finally our iDVD project is done, can we erase the clip that we had imported in iMovie without danger? Or we have to keep the clip in iMovie until the DVD are burn?

Hi
Most processes in Non destructive Video editing is based on that the raw-material is safe and intact. So by trashing it most things can or will go wrong.
So e.g. in iMovie project - there is NO Movie - just a small text document refering to Your raw-material, audio files and photos (within or not in iPhoto Library) on how they are to act together to Play Your Movie.
And by changing any of them the Movie project will be affected or destroyed.
reg. iDVD there is also a link back to iMovie - Most famous to set of the iDVD BUG !
To do that - one starts a new iDVD project and add movies etc. Then find something i one movie in need to be adjusted. Closing iDVD and returning to iMovie and doing this. Then when back to iDVD it will notice and ask You to Up-date or Cancel. Neither works. The iDVD project is harmed. All Chapters now point to Chapter One and more strange things happens.
the medicine I use - I start a brand new iDVD Project and re-do it and hopefully not fine any more to be fixed in the movie.
This indicates the strong link inbetween iDVD and iMovie and I would not touch anything in iMovie till DVD is Burned and Ready AND Plays Well !
Yours Bengt W

DVD wont eject please help

I put a dvd into the dvd drive that i burned from TiVo. I've used other dvds burned from TiVo in this drive that have worked perfectly, but for some reason this dvd wont eject, and when i try to open the idvd application it gives me a message that says, "There was an initialization error a valid dvd drive could not be found. [-70012]" it is very frustrating and i just want to get it out of my computer because i can't use any cds or dvds. I've already tried restarting the computer while holding down the track pad button and restarting while holding down C. Does anyone have any other advice?

Monica, first welcome to the discussions,
Restart your computer, and hold down your trackpad to click continue to hold it down and it should eject, if not go to the very upper right key on your keyboard and press it, it is another method to eject.
Tell us if this works for you. Don

HT1645 I have changed the encoder preference to all the different settings but it still wont burn my cd! What should I try next?!

What should I try next? I have a movie in iDVD all set up to go and it keeps telling me that there is an encoding error, so I have changed it to all three settings but it still wont burn and shows me the same error.

Hi
• Delete iDVD pref. file
iDVDpref. file resides.----> Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. (one or more of these)
com.apple.iDVD.plist
com.apple.iDVDApp.plist (may be ? - not sure this exist)
and find
com.apple.iApps.plist
While iDVD is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iDVD.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter: chflags nohidden ~/Library
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
But there are better ways to do this - but as I'm only in Mac OS X.6.? - I have no hand on know how - but the above way works if carefully done.
Yours Bengt W

OSX DVD/CD Burner Error Code - HELP!

Hey everyone. I hope someone might be able to help me out with a problem I am having.
I just purchased a Plextor DVD/CD burner, and every time I put a blank in it, it gives me an error code (0x80020025). I thought it just might be my burner, but I tried to burn a disc with my buddy's Lacie, and had the same issue. The drive reads all discs fine, it just won't let me set it up to burn one.
Can anyone help, please?! Thank you all so much.

The drive is an external drive. It is a Plextor PX-740UF. I am running it with USB. Just to let you know, I had the same issue with my buddy's Lacie drive when I plugged it in.
The drive recognizes everything BUT unburned discs. When I put one in and I try to open it in Finder, or in iTunes, it gives me that error code.
I have also tried to do the force quit from Finder, and then re-launching, but this doesn't help either.
Thanks for your help.

Fresh install of windows missing drivers

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=&sw_lang=&product=517779...
^ That is my product with its drivers ^
I managed to install a few:
IDT High-Definition (HD) Audio Driver
Intel HD Graphics Driver
Synaptics Touchpad Driver
Validity Fingerprint Sensor Driver
Broadcom Wireless LAN
Realtek Local Area Network LAN
But when I go to Device Manager I still get missing drivers:
I'm not sure what those are... I tried the Scan Now from the HP site to let HP scan my system for out-date and missing drivers, but after I installed the extension to Chrome, nothing happens when I hit Scan.. it's like the button has no action.
So does anybody know which drivers it is I need to DL?
This question was solved.
View Solution.

Please provide the HardwareID's for each of those devices. This will aid us in assisting you with the missing drivers.
Just taking a guess, I would say... Intel Chipset Installation Utility and Driver, Intel Management Engine Interface (MEI) Driver, Intel Rapid Storage Technology Driver, Realtek Card Reader Driver, and one of the 3 USB 3.0 Host Controller Drivers (Fresco Logic, Renesas Electronics, or NEC Electronics).
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

CD/DVD wont burn. And missing drivers.

Similar Messages

Maybe you are looking for