CD Eject Doesn't work with latest upgarde to OS 10.4.9

Is anyone else having this problem?
I have two hard drives on my Mac, and for the longest time was not able to eject a CD using the eject button on the keyboard, or from the menu.
Today I booted from the OS on the other hard drive (10.3.7, I think) and it worked fine. I ugraded that system to 10.4.9, and now the eject key isn't working.
Is this a bug in the latest upgrade? If so, any solutions?
Thanks!
[email protected]

You could always use the Eject menu. To activate it open…
/System/Library/CoreServices/Menu Extras/Eject.menu
… just the once and you'll find it in the menubar.

Similar Messages

Ipod touch doesn't work with latest itunes install

Ok, I've been around the block too many times. Somebody, pleez help! I have a 3rd generation ipod touch. Couldn't connect to itunes (previous install for our nano and classic). Uninstalled it. Downloaded fresh, latest, 64bit installation. Tons of problems with Apple Application Support. Uninstalled, reinstalled, uninstalled EVERYTHING (Quicktime, Bonjour, updater, etc.) Used Windows uninstaller and registry cleaner. Reinstalled - iTunes works. Great. Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?

Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
In iTunes, with the Touch connected, go "Help > Run diagnostics." Uncheck "Network Connectivity tests" and "DVD/CD tests" but leave the other boxes checked. Click "next" and then "next" again. Paste the contents of your diagnostics into a reply here so we can have a look.

[SOLVED]bbswitch doesn't work with latest kernel(3.2.11.1)

[ebs@shankar ~]$ sudo rc.d restart bumblebeed
Password:
:: Stopping Bumblebee [DONE]
:: Starting Bumblebee [BUSY]
FATAL: Module bbswitch not found.
And due to that, my graphics card Nvidia is always draining power and heating up. How can I fix this?
UPDATE:
The only urgent fix for this is to downgrade to linux kernel 3.2.9.1.
But, I don't like this fix as I installed arch linux because I want to use the latest software.
Last edited by ebshankar (2012-03-19 05:44:02)

erdk wrote:Hmm, I've also have newest kernel with bumblebee, bbswitch and nvidia, but instead of normal versions I've installed dkms-* packages (dkms-bbswitch and dkms-nvidia) - so when new kernel arrives these modules are automatically rebuild to match new kernel. You should reinstall this two packages (bbswtich and nvidia) - they be build against new kernel and everything should be ok
Yes, the dkms versions work fine with the new kernel
Thanks!

HTTPService.headers doesn't work with latest Player

Or maybe I'm messing something up, but I can't get any headers I set to transmit in a web app, but the same code works fine in an Air app.
These bugs suggests that it hasn't worked for the last 3 years:
https://bugs.adobe.com/jira/browse/SDK-11401
https://bugs.adobe.com/jira/browse/FP-209
(I confirmed the presence [or absence] of headers using both Fiddler, and FlashBuilder 4's 'Network Monitor').
I've also seen several unanswered posts in the forum here asking similar questions, but no answers.
In FP-209, there is a comment:
>>
I ran into this issue today. Spoke with various people in my Flex community and no one could understand why this was an issue. Some people pointed to the security issue note referenced here http://kb2.adobe.com/cps/403/kb403030.html, but the "Authorization" header was allowed again after 9.0.124.
>>
Can someone in the know confirm that these bugs are supposedly avoidable with later Flash Player versions, because it's still failing for me in latest player version.
If you're struggling with same issue, please do vote for this bug to get fixed:
https://bugs.adobe.com/jira/browse/FP-209
Thanks!

I also encounter this problem,maybe this is good idea to work around
Gregory Golberg added a comment - 05/07/10 11:36 PM
Seven: like you, I can reproduce this in FB 4 and player version 10. It appears that the *only* "workaround" is to use http://code.google.com/p/as3httpclient/ (or a similar solution, basically, opening a Socket directly and talking HTTP to it yourself). That's what I am doing currently.

LastPass password manager doesn't work with latest Firefox after downloading add-in, installing it and re-starting Firefox.

I'm using FireFox 20.0. I downloaded the add-in, installed it and re-started FireFox but LastPass doesn't show up in the add-ins nor does it fill in the login info on sites that I have in my LastPass vault.

What I've done is make LastPass my home site so when I launch FireFox, I log into LastPass and leave the LastPass vault page in an open tab. Then when I log into another site which requires a login and password which I've previously set up in LastPass, LastPass logs me into that site automatically. LastPass is a free password manager that works well in IE. Any time LastPass detects a login page, it enables you to set up the password and ID in its database and fills in the login info at future login prompts. My solution for FireFox is a bit clunky but when I need to use a second browser, it works.

Accessory: Belkin Keyboard doesn't work with latest iOS update

Hello,
does anybody know how to synchronize my Belkin bluetooth keyboard with the iPad? Usually what I have to do is only to connect the magnet on the accessory and turn on my iPad's Bluetooth and it synchronizes itself. So when I type something on the keyboard, iPad does realize that I am using an external keyboard hence, I am using the keyboard.
now, when I connect the magnet on the keyboard, and i type in something, iPad does not recognize this. does anybody have the same problem or know how to fix this?
Message was edited by: Zhinbei. The problem is solved. I had to re-pair the keyboard with the iPad by press and hold Fn + Pair buttons for 2 seconds until it appears.

Try repairing permissions with Applications -> Utilities -> Disk Utility.
There select First Aid. After that select the hard drive within Disk Utility's window. Finally click on the button that says Repair Permissions. A reboot may be necessary to finish the work when it is done.
Ignore any errors reported.

Apple TV Gen 2 - "sleep shortcut" doesn't work with latest software update.

I used to be able to hold down the "select" button when on the Apple TV home menu, and the box would go to sleep. However, after the last software update, this no longer works. The only way to put the box to sleep is to head through the settings menu. This is annoying and time consuming. Any ideas why the shortcut was disabled? Is there something new? Any plans to fix the "bug"?

YUP..!! Just updated the device and it works fine again... Thank you for your swift reply.. Enjoy your Sunday...
//Jesper

My WORD for Mac doesn't work with latest upgrade. Any Remedy?

Most recent update to OS caused WORD for MAC not to work. Any Remedy?

If you just updated to Mountain Lion (10.8) and you were using Office 2004, your best option is to find a newer Office replacement. Here are a few:
Office 2008 or newer ($140 and up for the 2011 version; you may find 2008 used elsewhere)
Apple Pages ($15)
LibreOffice (free)
Matt

Latest Quicktime update doesn't work with older versions of Safari.

I have an iMac with Panther 10.3.9. I've downloaded and installed all the updates regularly. That last update of Quicktime doesn't work with Safari! All I get is the big Q. Any ideas?

Hi
Welcome to Apple Discussions
Check your Quicktime settings in System Preferences>Quicktime>Advanced panel.
Mime settings>make sure nothing is checked in the Miscellaneous box.
Advance panel>Enable Flash ought to be selected.

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

I have lightroom 4 and it doesn't work with d4s raw images? what can I do?

i have lightroom 4 and it doesn't work with d4s raw images? what can I do?

That model begin to be supported only in the very latest version of Lightroom, version 5.4. You will either need to upgrade Lightroom, or else use the latest version of the free Adobe DNG converter (version 8.4) to create digital negative copies of your raw images. Then you can import those DNG files into the Lightroom that you have now. The choice is yours.

Flash player doesn't work with explorer 9

Hi. I need your help. I installed the latest flash player version for Explorer 9
operating system : 32bit
windows 7 home premium
I ve had this problem after installing Norton Internet security although I ve totally removed it.
but it works with other browsers like firefox and chrome. Only the flash doesn't work with explorer 9.

Enabling Flash Player in Internet Explorer 9
ActiveX Filtering in Internet Explorer 9

X-Fi 2 doesn't work with BBC iPlayer

My X-Fi 2 doesn't work with BBC iPlayer content.
I've no idea whether it should or not, - but just for info as some people will be wanting to know.
I can load the files by dragging and via Centrale without error messages, but it just won't play the .wmv files (which work on the X-Fi ).
Firmware .0.0

JohnZS wrote:
I might be wrong, and if I am wrong then could someone correct me, but as far as I knew, Creative Cards do not support Windows Server 2003. I maybe wrong, have you tried the latest BETA driver (see exciting news thread)John
In windows 2003, the driver works if I limit the total ram to 4096MB by adding /Maxmem=4096 in boot.ini file.
FYI
/maxmem
The /maxmem parameter limits the physical memory available to Windows.
/maxmem=SizeInMB
Subparameter
SizeInMB
Specifies the maximum amount of physical memory available to Windows. Enter a decimal number that represents the amount of memory in megabytes.
Comments
This parameter actually limits Windows to memory addresses less than or equal to the specified value. Because some memory within the remaining address space might be reserved for nonsystem use, the actual memory available to Windows might be less than the amount that you specify.
The /maxmem parameter is supported only on Windows Server 2003, Windows XP, and Windows 2000. On Windows Server 2003 and Windows XP, use /burnmemory to limit system memory more precisely. On Windows Vista and later versions of Windows, use the removememory or truncatememory parameters with the BCDEdit /set command
You can use this parameter to test a driver in low memory conditions. For example, you can use this parameter to limit a computer with GB of memory to 256 MB of memory.

Sound Blaster omni 5.1 doesn't work with Yosemite 10.10.1

Hi all! My SoundBlaster omni 5.1 doesn't work with Yosemite 10.10.1 (installed driver for Yosemite 10.10). Equipment in system is displayed properly, like "Sound Blaster Omni Surround 5.1". And SB is set as active. Volume controller is active (system shows volume adjustment). But there is no sound on output (either) and mic doesn't catch the signal.With MS Windows 8.1 it works good. Therefore I suppose problem not in hardwear, most likely in drivers.Does anybody have the same problem?

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

CD Eject Doesn't work with latest upgarde to OS 10.4.9

Similar Messages

Maybe you are looking for