Cd icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

Jailbreaking iOS can't be discussed in this forum.

Similar Messages

Nokia E72 voice mail icon shows even when I have n...

I have a new Nokia E72 UK edition and am with Orange UK network.
The voice mail notification icon in my E72 always shows in the bottom right of the screen even when I have no voice mail, and have deleted all the messages. This is really annoying, especially as for a while it worked fine.
I tried disabling voice mail notifications, switching the phone on and off, then enabling them again but still no joy.

This is quite a common problem on orange UK. It's actually oranges fault.
Some of the following things have been known to clear the fault:
Placing the sim into another non-orange unlocked phone, then checking the voicemail. When put back into the orange phone the icon has gone.
Calling customer services and requesting an over-the-air sim update, this nearly always solves it.
Calling or visiting an orange store and getting the sim card replaced.
Message Edited by psychomania on 12-Jan-2010 02:18 PM

If I bought a T-mobile unlocked iphone, once received, is there anything required to activate or can i just simply insert another carrier and immediately make phone calls?

I live in lebanon and I need a factory unlocked iphone 5s to use my carrior (touch), so should i buy the t-mobile unlocked iphone, or will i have to call t-mobile?

Ok thanks, I just needed to make sure, because when i bought my iphone 4 3 years ago, it was 'carrierless' for more than 6 months, which was a bummer

Apps icon shows updates when i go there the update all icon is not highlighted if you go to any of the UPDATE box's you are directed to the application????

apps icon shows updates when i go there the update all icon is not highlighted if you go to any of the UPDATE box's you are directed to the application????

ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

HT201210 My mini is freezed only Itunes icon and the USB icon is showing even when i restart, pls advise

My mini is freezed only Itunes icon and the USB icon is showing even when i restart, pls advise

The USB cable and iTunes logo is telling you to connect your iPad to the computer you normally sync with. Something has gone wrong and you need to restore your iPad.

Sarari icon shows but when I click on it with the mouse a question mark appears and it won't open

The safari icon shows but when I click on it to open a questionmark appears and safari will not open?

I am guessing that the library may reference some content which was not on the same drive - maybe it references some picture or music pulled from an iphoto or itunes library on another mac?
It does load the library, right? Can you skim or play the clips in there? Do some fail to play or show a warning yellow sign?
And, by the way 'SAN' stands for "storage area network" - don't worry about it, it does not apply.

Allocated heap memory goes up even when there is enough free memory

Hi,
Our Java application's memory usage keep growing. Further analysis of the heap memory using JProbe shows that the allocated heap memory goes up even when there is enough free memory available in the heap.
When the process started, allocated heap memory was around 50MB and the memory used was around 8MB. After few hours, the inuse memory remains at 8MB (slight increase in KBs), but the allocated memory went upto 70MB.
We are using JVM 1.5_10. What could be the reason for heap allocation going up even when there is enough free memory available in heap?
-Rajesh.

Hi Eric,
Please check if there is any error or warning in the Event Viewer based on the data time?
If there is any error, please post the event ID to help us to troubleshoot.
Best Regards,
Anna

Database Instance Using Swap Space even When There is Plenty of Free RAM

Hi,
I am facinga strange issue in oracle on solaris 5.10
Platform:solaris 5.10
Database version:11.2.0.1.0
Our database Instance Using Swap Space even When There is Plenty of Free RAM.
We have 80GB of physical RAM, 32GB is set to oracle SGA_MAX_SIZE
memory parameters:
memory_max_target big integer 32G
memory_target big integer 32G
sga_max_size big integer 32G
sga_target big integer 32G
but still oracle is taking memory from swap even though we have enough physical memory.
please find the top output
load averages: 0.09, 0.18, 0.84 01:07:49
134 processes: 133 sleeping, 1 on cpu
CPU states: 99.4% idle, 0.4% user, 0.3% kernel, 0.0% iowait, 0.0% swap
Memory: 80G real, 69G free, 35G swap in use, 49G swap free
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
1052 oracle 13 59 0 95M 66M sleep 13:16 0.07% oraagent.bin
10256 oracle 1 59 0 32G 835M sleep 0:00 0.03% oracle
1227 oracle 15 59 0 78M 56M sleep 4:27 0.02% ocssd.bin
9524 vector1 112 59 0 1704M 776M sleep 45:04 0.02% java
988 oracle 38 59 0 119M 92M sleep 3:00 0.02% ohasd.bin
1297 oracle 1 101 -20 453M 390M sleep 2:47 0.02% oracle
1765 oracle 1 101 -20 32G 329M sleep 2:45 0.02% oracle
10258 oracle 1 59 0 32G 345M sleep 0:00 0.02% oracle
10259 oracle 1 59 0 3400K 2024K cpu/20 0:00 0.01% top
1777 oracle 1 59 0 32G 342M sleep 1:14 0.01% oracle
1246 oracle 6 59 0 56M 44M sleep 1:22 0.01% diskmon.bin
1803 oracle 1 59 0 32G 514M sleep 0:30 0.01% oracle
1215 oracle 15 59 0 71M 46M sleep 1:12 0.00% cssdagent
1307 oracle 1 59 0 453M 390M sleep 0:45 0.00% oracle
1217 oracle 11 59 0 81M 49M sleep 0:35 0.00% orarootagent.bi
Vmstat output:
$vmstat 5 5
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s3 s3 s3 s3 in sy cs us sy id
0 0 0 53698448 73900568 20 81 32 6 5 0 1 -0 0 1 -0 2235 1447 1984 1 0 99
0 0 0 51196160 72037552 1 13 0 0 0 0 0 0 0 0 0 2505 1403 2204 0 0 100
0 0 0 51193488 72035864 55 380 0 0 0 0 0 0 0 0 0 2487 2143 2203 0 1 99
0 0 0 51183856 72030176 0 0 0 3 3 0 0 0 0 0 0 2496 1370 2182 0 0 99
0 0 0 51182648 72029112 22 117 0 0 0 0 0 0 0 0 0 2503 1408 2193 1 0 99
$cat /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
I refered the metalink document id: [ID 761960.1]
Database Instance Using Swap Space When There is Plenty of Free RAM metalink note [ID 761960.1]
and tried the disabling the sga_max_size and memory_max_target and memory target with all different combination but no use.
We have one more box where same setup was configured in solaris platform but there the above memory parameters are not disabled but it is not using swap space it takes memry only from physical RAM
Can any one throw some lights on this issue. It wopuld be great if I come to know where the exact problem
Thanks in advance
With Regards,
Boobathi P

Hi,
I didn't say I am not using 11gr2 memory parameters I am using all the automatic memory parameters but the thinks is as per the metalink note I tried by disabling the automatic memory parameters. but that didn't help me in preventing unnecessary swap usage. So I reverted. now it is using automatic memory parameters.
so What is the solution for this?
With Regards,
Boo

Dax Calculate column even when there is no record at a date

We are creating a powerpivot model based on a table with data about worktasks of our employees.
This is simplified our input:
Tasknr date started dateended
1 20140101 20140201 (yyyymmdd)
2 20140102 20140103
3 20140104 20140108
Etc
We created two measures to calculate how many tasks are opened and closed per day. That was no problem, but now the tricky part. We also want to know each day how many tasks are
still open, even on days that no tasks are opened (or closed).
My approach was to create a calculated column to determine how many tasks are opened up to that date and subtracted the closed tasks and end up with the tasks that are open. That
seems to be working :
=COUNTROWS(FILTER(Tasks; Tasks[Open]<=EARLIER(Tasks[Open]))) - COUNTROWS(FILTER(Tasks; Tasks[Close]<=EARLIER(Tasks[Open])))
When I load this to the excel pivot I end up with this:
Row Labels| Opened | Closed | Open not finished
1/1/2014
        1
0          1
1/2/2014
1          0
2
1/3/2014
        0
1         0
1/4/2014
        1
0         2
The line with 1/3/2014 should have 1 in the column [opened not finished], but because that calculation is linked to the opendate column, not to the closed and 3/1/2014 no task
was opened, there is no value. On days that no tasks are opened or closed there even is no line at all although there could be tasks that are still open.
I need a mechanism that calculates the value even when there are no records
on a particular day. Our users want to be able to view the results on any date they select.
I have considered a second table with all the dates and calculate columns from the task-table but are there other ways to do this? I searched this forum but did not find an answer
so far.

Hi Jacob,
In our company we have a standard date table that is included in all of our models. What I didn't want to do in this case was to extend that table with calculated fields to solve this issue. Alternative was to create a new date table with the calculated
fields I needed. But I don't like that also so what I did was rewrite the sql that loaded the data into the pivot so that the measures were calculated at the load. But I am also not happy with that solution because of maintanance and performance reasons. My
feeling is that there must be a way to solve this with only dax in the loaded table.
Jacob's answer does exactly what you want. The DAX expression in his response is a measure which you could put in your Tasks table. You don't need to alter your date dimension in any way.
The key to this technique is that the date table cannot have an active relationship to your Tasks table. (although you could have an inactive relationship and then you could use the USERELATIONSHIP function to make other measures easier to calculate)
Translating Jocob's measure into something against a 'Tasks' table would looks like the following:
=
CALCULATE (
COUNTROWS ( Tasks ),
FILTER (
Tasks,
Tasks[Open] <= MAX ( Calendar[Date] )
&& Tasks[Closed] >= MAX ( Calendar[Date] )
http://darren.gosbell.com - please mark correct answers

GRC 5.3: CUP asks to perform risk analysis even when there are no risks in request

Hi All,
We recently upgraded from GRC 5.3 SP13 to SP22.
The one issue which we are facing after upgrade is that now CUP is forcing approvers to do Risk Analysis, even when there are no risks in the CUP Request, that is Risk Tab is Green.
Previously approvers were able to approve requests without doing risk analysis, if there were no risks in the request.
CUP used to force them to do risk analysis only when there were risks associated with requests.
But now, it is forcing approvers to perform risk analysis, even if there are no risks, i.e. approvers are not able to approve requests without any risks without doing risk analysis.
Please advise.
Thanks
Aditi

Hi,
Can you check if any change is made in Configuration -> Workflow -> Stage -> Approvers
Regards,
Claudio

PRI channel busy issue , even when there are no active calls

Hi All ,
i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
i already replaced that card .
please advice

I believe that this post should be made to the Unified Communications and Video forum.
Would please you repost to that group.
Thanks

My iphone 5 does not show callid when there is a call, i used to get it but after my trip to China, the cller id is always unknown, how can I get it back? thanks

Hi
My iphone 5 does not show callid when there is a call, i used to get it earlier but after my recent trip to China, the cller id is always shows unknown, how can I get it back? thanks

Thanks Malcom, I was able to restablish the caller id feature through the carrier as you suggested

My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

You may have to restore your phone to correct the problem.

USB not recognized - even when there's no USB device at all (Windows 7, Pavilion dv7)

Since a few days now I get the message
'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'.
It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..
Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
Anyone has any idea?
Thanks
HP Pavilion dv7 Notebook PC
LE902EA#UUG
Windows 7 64 bit
This question was solved.
View Solution.

The solution can be found here

Constant notifications even when there's nothing to be notified of. Galaxy S5.

Ever since I updated my Samsung Galaxy s5 yesterday I have been getting constant message tones even when there's nothing to be notified of. I have restarted my phone more than enough times to know its not that causing issues.

josh366,
This definitely seems strange that you are receiving these notifications without having any type of texts, or emails, or any other types of notifications. Since the software upgrade, have you downloaded any new apps? Let's also try to power the device off, remove the SIM card and wait for about 30-60 seconds and then put the SIM back in and power back on. Keep us posted!
ErinW_VZW
Follow us on Twitter @VZWSupport

Cd icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

Similar Messages

Maybe you are looking for