CD label printing in PIXMA PRO-10

Why does the CD label printing program in the PIXMA PRO-10 ask for the type of paper? Isn't it supposed to go straight to the CD unit?

If it doesn't do it all the time is it possibly losing wireless signal? How close/far is printer from the wireless router?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

  • Printing Issuse From Lightroom 4 To Canon Pixma Pro 9000 MK II

    I have been trying to print from Lightroom 4 to a Canon Pixma Pro 9000 MK II.   Whenever I try to print via the front try (for canvas) I get an error message (code 1281) and I cannot print.   I have tried a few different papers as well as canvas and all of them give the same error code.
    I have also tried printing from Elements 9 with the same problem.
    I can print via the front try using Canon's own software, Easy Print Pro, but I cannot soft proof the image first and I cannot the the correct size of image either.
    Does anyone have any idea how I can get round this problem?
    I have spoken to Canon and they have passed the buck saying that as I can print using thier software it is an Adobe issue.
    Printer: Canon Pixma Pro 9000 MKII
    Software: Adobe Lightroom 4
    Operating System: Lion OSX

    The final answer was as per Rikk Flohr's instructions,
    Lightroom>Print Module
    Print Settings button Bottom Left-hand Panel
    Set the Center Pull-down to Quality and Media
    Paper Source: Front Tray
    I was having difficulty finding these previously, thanks Rikk.

  • Canon Pixma pro 100 Ink how to identify the black cartridges when label was accidently removed

    I just started putting a new Canon Pixma Pro 100 printer together- I was not thinking and removed two of the grey (light), and grey cartridges labels. Now I do not know which to put in the slots, I cannot see any gradient by holding them up to the light, and the actual cartridge is not marked. I am soooo dumb, any suggestions.

    You  got a 50/50 chance.  Go for it!  
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

  • How to print lever arch spine labels on HP Officejet Pro 8600

    how do you print level arch spine labels on HP Officejet Pro 8600?

    SOTAP, sounds like you are having a dilemma printing these labels. First question, did these labels come with a program or CD that you use for printing? Most labels like those from Avery have a specialized program for formatting the labels for printing. 
    Let me know! 
    -Spencer
    PS Have a great day! 

  • I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

    I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
    Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
    Thanks,
    Paula

    I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
    Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
    Thanks,
    Paula

  • Photoshop CS4 won't print on a new Canon Pixma Pro 10 - Mac Yosemite -

    New Epson Pixma Pro 10. Printer works well with other applications, but just sends out blank pages when printing from Adobe Photoshop CS4. Canon suggested I use their plug, Print Studio Pro, and this worked with a file with layered images and text. However, it would not work with a file that had 3 text layers (two of which were hidden) unless I flattened the image. According to Canon, the plug in is supposed to work only with jpegs, but it did work with psd and tifs (when flattened). Any ideas on how I can get it to work directly from Photoshop.

    Oletimer wrote:
    Thanks for your help - I did find and download the Photoshop update to 11.0.2 and went to the Yosemite developer page you mentioned and do not see how to download the update, so I guess I will just have to wait for that to be released.
    That's fine, you should do OK with Yosemite 10.10.1.
    I'm glad you found the CS4 11.0.2 update.  I nearly hit the roof when I read another post of yours with the "suite auto updates" nonsense after I had explained to you why one cannot rely on Adobes utterly useless auto updaters.
    The hapless Adobe auto updater team in India began to get their act together only as of the CS6 updates, but they are back to their unparalleled incompetence in CC and CC2014.
    In case you missed it, here's the link to the latest Canon Printer Drivers v3.1 for OS X from Apple, available to the general public, which sounds a lot newer than what you have.  There's no reason for you to stick to "Print Studio 1.3.6" whatever that may be.
    Canon Printer Drivers v3.1 for OS X
    Let me know if you make any progress with your issue.

  • Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

    Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
    Have new Canon Pixma Pro-100 printer and set it up yesterday.  First thing printed was a
    document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK.  Next I fire up
    Photoshop and open a 4 X 6 inch image to do a test print.  I set it up in the print dialog as
    4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
    manages the color.  I load the paper in the rear tray close the covers and hit print.  Now, when
    it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
    on the remaining 2.2 inches then spits the paper out.  It does this in Photoshop (any image it doesn't
    matter), and it does it printing from Capture NX.  I have been able to get it to print on the paper
    correctly using Apple's Preview program but that that's not going to do me any good.  I was on
    the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
    I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
    I want to be able to print from Photoshop.  Any one every heard of this or experienced the same
    problem? Thanks JamesD!

    Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
    My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
    When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
    Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
    It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
    On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
    Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
    One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
    I also checked out this B&W test image:
    http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
    You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
    You can print a series of test images:
    find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
    You can do a similar thing in Lightroom using the printer driver and User Templates.
    There would be some one-time trial and error to that approach.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Unable to center a print on 8/5 x 11 inch paper with Pixma Pro 100

    I've been using a Pixma Pro 100 for just 3 weeks.  No matter what I do or try, prints on 8.5 by 11 inch paper using the manual feed tray are not centered.  In portrait orientation, the margin on the leading edge short edge is slightly less no matter what size the image.  For example, if the leading edge margin is 1/4 inch, the opposite margin is 3/8 inch.  If the leading edge is 7/8 inch, the opposite margin is 1 inch dead.  The long side margins are equal.  I'm using Photoshop Elements 9.0.  I've tried printing out of the edit space, where "center print" is an option, but I realize now that this just centers the image in the window representing the print, that it does not center the image on the page.  I have not notice this problem with smaller size paper, such as 4 x 6.  Any suggestions?  I have not tried loading the paper in the internal or "rear" tray because I thought the paper path with the manual feed would be straighter.  Besides, I'd like to be able to use the manual feed with even larger paper and get centered prints.
    P.S.  I just tried selecting "borderless" print in PSE 9 with a custom image size smaller than the paper, e.g. 7 x 9.8 inches, and crop to fit.  Just looking at the preview, this seems to have resulted in equal margins left and right, top and bottom (the L-R margins are different than the T-B margins of course).  I was unable to make any of the necessary adjustments in Canon Print Studio Pro - I could not figure out how to unlink the height and width of the image.

    "...  that is a remarkably unhelpful and condescending response."
    Condescending or not, however, it is still most likely PSE that accomplishs this task.  I don't use PSE anymore since I switched to Lightroom.  Hence the suggestion to find a PSE forum.
    But it is the software that let's you move or put the photos where you want them to print.
    A PSE forum may be able to show you how to do this.  Example below, if I want two 5x7s in oppoiste corners, it is done easily in LR.
    If I wanted one photo centered it is a simple click to get the adjustment "squares" and move the photo.  (Bottom picture)
    BTW, I am not worried.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Pixma Pro-10 stops printing in middle of an image.

    Pixma Pro-10 stops printing in middle of an image.  It is wireless, using OS Windows 7 - 64 bit.  It doesn't do it all the time but the larger images (13x19) have more problems. I am using LightRoom 5 and Canon Print Studio Pro to print the image. Very frustraing especially when it gets to 1 inch of finishing an image and decides it done.   Thank you for your assistance.

    If it doesn't do it all the time is it possibly losing wireless signal? How close/far is printer from the wireless router?
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • I have a Pixma Pro 100. Does anyone know what printer setting I would use to print on 11 x 14 paper?

    I'm trying to make 11 x 14 prints but I'm unsure what what size to set it as in Photoshop. I'm using Epson paper which works fine with the printer I just don't know what settings to use.
    Thanks.

    Go into the OnScreen Manual and search for page P010. That will give you instructions for custom paper sizes.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • So, CAN I turn off the printer's color management? Pixma Pro-100.

    So, I am trying to turn off the color management function for the Pro-100...
    On my Windows desktop, I use Photoshop to print with Canson Rag 210, color profile installed, allow photoshop to manage colors and print a beautiful, perfect print with the Mark 9000. Now, I have the Pixma Pro-100 and using the exact same settings, I print wirelessly with my laptop, and I get these dark, red/orange hued prints that are atrocious.
    I should mention the same exact photograph printed between setups ALWAYS prints better with the Mark 9000 and my desktop. However, when using my laptop and the Mark 9000... Crap. Laptop and Pixma Pro-100... Crap. What is my MAC doing that my desktop is not?! How can identical settings print such drastic results? Photoshop does warn me (newer version on my MAC vs. Windows) to turn off the printer's color management in the printer's settings, but I do not see that option. Maybe I'm missing it? How do I do that? I'm thinking it may help!

    Have you tried printing from the MacBook using Canon Print Studio Pro or letting printer manage colors? I know this doesn't specifically answer your question, but PSP is designed to handle the PS/printer interface.
    Download PSP 1.3.5 from the Canon support site.
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_pro_series/pixma_pro_100...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Canon Pixma Pro 100 won't print

    Hopefully someone can help.  I just purchased a new Pixma Pro 100 and diligently set it up using a USB connection to my laptop (Windows 8, 64 bit).  The printer printed the alignment page fine, but won't print anything else (including a Test Page from the device Properties box).  I immediately get an on scree error message when trying to print.
    Any thoughts out there?

    Unplug the printer for 15 minutes.  Unplug it from everything.  Don't use My Image Garden.  Use Easy Photo Print EX (came with your printer) or some other program.
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • New Canon Pixma Pro-100 printing with streaks on backgrounds

    Hello.  I just purchased the printer last week.  I'm operating on a MacBook Air.  I typically use LightRoom and Photoshop.  
    I'm a professional photographer and recently look a class at ICP and learned how to print there.  I was shocked at how beautiful the prints were.  This was using an Epson in a classroom.
    I did my research and talked to other photographers and decided the Pro-100 would be perfect for me, and so far, it is.
    I've had trouble with magenta casts when using LightRoom.  Switched to PhotoShop and got better results.  But some prints, especially those with a simple, plain background, faint lines appear across the page.
    Here's an example.  The lines appear top to bottom every 1/4 inch or so:
    Solved!
    Go to Solution.

    Call Canon at 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Maybe you are looking for