CD not working error-insert a disk
I have DV6-6119tx pavallion laptop.
I am unable to play any type of CD but I am able to play all types of of DVD. Please suggest solution.
Hi:
Try the Microsoft fix it tool.
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
If that doesn't work, then try the manual fix by reading the instructions at the link below (Method 3 and 4):
If that doesn't work, most likely there is a hardware issue with the CD optical laser.
A DVD drive has two lasers. One reads CD's and one reads DVD's because they have different focal points.
Similar Messages
-
T4850CT: Error message: "HDC Error - Insert System Disk in Drive"
Hi there...
Can anyone help? I think I know what the error message means...but don't quite know how to fix it. Any Ideas? I am currently trying to find a system disk online - for this old laptop
On startup...the laptop counts up its memory and displays this error message:
HDC Error
Insert system disk in drive
I can access the Setup System and that seems to be about all!!? On the QuickRead Status Bar...it recognises/activates the Hard Drive and the Floppy Drive.
Any help is totally appreciated ([email protected])
Message was edited by: anjasomethingHello
I have seen this problem when there is not enough power coming from the Ac adapter or when the machine is being used with a battery only and the battery is too weak.
Hope this help
Bye -
Printer will not work: error code 0xc19a0022
Printer will not work: error code 0xc19a0022
Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Smart scan not working with Insert Select statements
We have observed that smart scan is not working with insert select statements but works when select statements are execute alone.
Can you please help us to explain this behavior?There is a specific exadata forum - you would do better to post the question there: Exadata
I can't give you a definitive answer, but it's possible that this is simply a known limitation similar to the way that "Create table as select" won't run the select statement the same way as the basic select if it involves a distributed query.
Regards
Jonathan Lewis -
Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work
Oh phooey. I had the same problem, so I decided to delete and reinstall. Only to discover that Google's YouTube app no longer supports anything below iOS 6. This is a problem since I'm running an original iPad.
Yes, I realize that my version of iOS still has the old YouTube app. But it's not the same. For one thing there are a lot of ad-supported videos that will only play in the new app. -
HT4623 my i phone will not work error 3194
My Ipnone will not work error 3194
Well, right now, Apple is getting loads of people who are trying to download the new update. My iPod is doing the same thing, so, just wait an hour or two and then try again. It may take a while to veryify the update, and even longer to actually download it. Some people at my school updated their OS in study hall, while others were having the same problem you were. It should be fixed soon, just relax...
-
in the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered
Also, I probably should have added that I am with Vodafone, and I'm currently using the Blackberry Curve 3G (9300) on the version 5 software. I also have no access to the Internet, which is telling me I have no signal. I have full 3G signal, so there is no issue whatsoever with my signal. I don't use the BBM on the phone, so I'm not sure if the issue is affecting that also, but I assume it would.
-
app store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8
Microsoft Windows 8 Business Edition (Build 9200)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0150B8980AD913B8
Current user is not an administrator.
The current local date and time is 2014-03-18 04:37:01.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.5.5 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {240FD97D-8118-4928-BF4E-8A531F89D837}
Description: Microsoft Wi-Fi Direct Virtual Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {BCD0EF3F-C4A4-402C-969A-C46C079E56A6}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {DD5C0797-BC23-4732-85FE-AC59C926EE98}
Description: Realtek PCIe GBE Family Controller
IP Address: 10.144.120.70
Subnet Mask: 255.255.255.0
Default Gateway: 10.144.120.1
DHCP Enabled: Yes
DHCP Server: 10.144.120.3
Lease Obtained: Tue Mar 18 03:26:26 2014
Lease Expires: Mon Jun 16 03:26:26 2014
DNS Servers: 10.144.5.30
10.144.130.5
Adapter Name: {E7CA4853-FF4A-49AE-AA4E-06BB1DEE67D4}
Description: Ralink RT5390 802.11b/g/n WiFi Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection was refused.
Connection attempt to Gracenote server was successful.
The network connection was refused.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
F: hp DVD-RAM UJ8B1, Rev H.02
Drive is empty. -
my dvd player is not working when i try disk Utility i get this massage Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Is this bad?
No. Ignore it.
What does this mean?
That you have the current OS version installed.
As far as I know, I have not installed any Remote Access software on my Mac.
It's part of the OS.
(55800) -
HT1218 Time capsule firmware update 7.6 to 7.6.1 did not work, error message 6272. What do I do now?
Firmware update from 7.6 to 7.6.1 did not work: error number 6272. What do I do now?
Connect by ethernet.. press reset and try again.
But going from 7.6 to 7.6.1 is like adding roaches to bug kingdom.. a wiser move is 7.5.2!! -
CD/DVD not working (error report included
The cd drive blinks for 4 minutes and just ejects the disk in windows. I dont know why it isn't working. I tried reinstalling the drivers in device manager, running in safe mode, and it didnt work
Troubleshoot CD/DVD Drives
Publisher details
Issues found
Media in CD/DVD drive is not readable (TSSTcorp CDDVDW TS-H653Q SCSI CdRom Device)
Media in CD/DVD drive is not readable (TSSTcorp CDDVDW TS-H653Q SCSI CdRom Device)The drive is empty or the media format is not supported
Not fixed
Insert readable media
Completed
Microsoft Fix it Solution - MoreOption
Microsoft Fix it Solution - MoreOptionMicrosoft Fix it automated solution
Fixed
Microsoft Fix it Solution - MoreOption
Completed
Potential issues that were checked
Your CD/DVD class filter was not recognized
Your CD/DVD class filter was not recognizedYour CD/DVD device may not be recognized when plugged into your computer. This problem may occur if upper and lower filters are being used in the registry.
Issue not present
Your CD/DVD device is not recognized
Your CD/DVD device is not recognizedYour CD/DVD device may not be recognized when plugged into your computer. This problem may occur if upper and lower filters are being used in the registry.
Issue not present
Drive is disabled (TSSTcorp CDDVDW TS-H653Q SCSI CdRom Device)
Drive is disabled (TSSTcorp CDDVDW TS-H653Q SCSI CdRom Device)The CD/DVD drive have been disabled in Device Manager
Issue not present
Drive is not assigned a drive letter
Drive is not assigned a drive letterThe CD/DVD drive is not accessible via an assigned drive letter
Issue not present
Issues found
Detection details
6Media in CD/DVD drive is not readable (TSSTcorp CDDVDW TS-H653Q SCSI CdRom Device)Not fixed
The drive is empty or the media format is not supported
Insert readable mediaCompleted
Insert a readable CD or DVD into the selected CD/DVD drive
6Microsoft Fix it Solution - MoreOptionFixed
Microsoft Fix it automated solution
Microsoft Fix it Solution - MoreOptionCompleted
Microsoft Fix it automated solution
Potential issues that were checked
Detection details
Your CD/DVD class filter was not recognizedIssue not present Your CD/DVD device may not be recognized when plugged into your computer. This problem may occur if upper and lower filters are being used in the registry. Your CD/DVD device is not recognizedIssue not present Your CD/DVD device may not be recognized when plugged into your computer. This problem may occur if upper and lower filters are being used in the registry. Drive is disabled (TSSTcorp CDDVDW TS-H653Q SCSI CdRom Device)Issue not present The CD/DVD drive have been disabled in Device Manager Drive is not assigned a drive letterIssue not present The CD/DVD drive is not accessible via an assigned drive letterHello ReyHpComputer,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your Optical Drive is not working correctly and you are seeking assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
If you happen to be running Windows 7 you can try the HP Support document: Drive Cannot Read Discs (Windows 7), as it was designed to help resolve issues with the Optical Drive not reading discs.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
System Audio Is Not Working: Error AppleLegacyAudio/AppleTexas2Audio.cpp
Hello,
I noticed last night that my audio has stopped working, both input and output. After checking the system log, this is the message that is repeated numerous times:
*Nov 19 13:04:03 sylvesters-powerbook-g4-17 kernel[0]: ^PSound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 2703 goto Exit
Is the reason the audio is not working simply a matter of a missing file or do I need to completely reinstall the OS? I have a back up that I can quickly copy files from.
Thank you very much.Hello,
Try deleting this file: com.apple.audio.DeviceSettings.plist
/Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the trash, empty the trash and reboot. See if your audio works as it should. If not... might want to do an Archive and Install:
Reinstalling Mac OS X
Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
Click Options. *If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings.*" If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
Click Continue.
Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
If you purchased a standalone version of Mac OS X, these installation instructions are in a booklet included with Mac OS X.
If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple, bundled third-party applications, and printer drivers, instructions are in the manual that came with your computer.
For more information, visit the Mac OS X Install and Upgrade Support website at:
Mac OS Tiger Install
Carolyn -
System restore not working, even with recovery disks
I have a Touchsmart Tx2 1020us. I want to completely restore it to factory settings.
when i use the recovery manager it pops up saying that there isn't a recovery partition and to insert disk #1. i bought the recovery disk set from HP and put disk 1 in. it then says to click on next. when i click on next the computer just shuts itself down. it never restarts, just turns itself off.
i also tried using the "press f11 repeatedly at startup" method. after pressing f11 a ton of times my computer just begins this shrill beeping sound and will not stop until you stop pressing f11.
so basically i've tried every method on this page :http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00809678#N554 with absolutely no results.
any ideas on how to get this stupid system restore to work?Hi,
Since you deleted your recovery partitions and your recovery disk set has issues you will need to purchase a set of recovery disks from HP or from an HP Partner. the cost is around $25.00 USD.
It is unfortunate, but when you deleted the recovery partitions you limited the options that were previously available to you.
Nonexistance or modification of the recovery partition is the reason that neither F11 from startup nor Recovery Manager from within Windows does not work.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)
Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
UdoHi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well. -
CLIENT_TEXT_IO.fopen will not work Error
I keep getting the following -
WebUtil Error: oracle.forms.webutil.file.FileFunctions bean not found. CLIENT_TEXT_IO.fopen will not work.
Nothing I have found on any forum threads has helped me resolve this issue. I believe it has to do w/ configuration. The error occurs in my Development Suite environment I have set up on my laptop. The webutil set up on the Application Server seems to be fine.
I've checked both default.env and formsweb.cfg and both seem to be set correctly. I have the webutil.pll attached to the forms and the webutil.olb in the object library.
I'm using WebUtil 1.0.6 on Oracle 10g (9.0.4).
If anyone has any guidance on this issue, your help is appreciated.The error isn't obvious. The Java Console outputs the following. I went through the webutil docs again and still didn't get the issue resolved. Can you help?
Oracle JInitiator: Version 1.3.1.17
Using JRE version 1.3.1.17-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\localadmin
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\localadmin\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
Loading http://server.domain.com:8889/forms90/java/f90all_jinit.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Maybe you are looking for
-
Color Changes in Spry Data Fields
Hi All, I'm new to Javascript & PHP programming. Currently I have coded neccesary apperances for the Web Page and also Spry Data Set to read an external XML date source file. What I need to do is one of the fields, needs to have color based status
-
I think this may have to do with Maven 3.0.4 being incompatible with Java 1.6. But I don't know for sure. Please help!
-
PSE9 wont even install on new 0sx6.4 macbook?! nothing happens!
Spent £100 (amazon uk) arrived brand new sealed, only to find absolutely NOTHING happens when I click install? advise wanted before I return it for a full refund this weekend and then have to buy PSE8 instead which is utterly ridiculous!
-
Warning: 10.4.6 + magicnoisekiller
i don't know if this is universally applicable but i just found that installing 10.4.6 causes magicnoisekiller to NOT work ie. the sound is back.
-
Migration Assistant to transfer files
I just got a new 27" iMac and I'm trying to use Migration Assistant to transfer files over from my 2008 24" iMac with OSX10.9.5. Source computer has been saying that 12 minutes left in the transfer for the last 5 hours. Is there a safe way to stop th