CD-Rom Drivers cannot read data disk burned with PC

HI, My iMac(Intel) cannot read data disk burned with PC, and the disk is ok for PC. But it can read music CD. Somebody can tell the reason, or modify configurtion?

You need to be much more specific, remember we aren't there and can't see your screen so we have no idea what file types you have on the CDs, without that information it's impossible to assist you.

Similar Messages

HP BD ROM Cannot read any disk

Hi,
HP BD ROM BC 5541H cannot read any disk cd / dvd.I tried these troubleshooting steps, but I still can't solve the problem. What should I do next? 1-Microsoft Fix it. 2- sfc /scannow, Scan result ( windows resource protection did not find any integrity violations. ) 3- Uninstall device from device manager and install again, device manager status ("This device is working properly").but rom have same behaviour , no any change.
Please help me.... how to diagnose/solve problem ?
Regards,
Minhas

You might check to see if you have the most current BIOS installed.
You might also try removing it from device manager.
Install the Intel Chipset Driver
Then reboot and let it reinstall it self.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

DVDRAM will not read data disks

I have a A215-S4697 with a HL-DT-ST GSA T20n DVDRAM. The drive will read CD and DVD audio and video disks. It will not read data disks. The driver says it is a CD-ROM. Is there a better driver I need? Has anyone had the same problem and found a solution?
Thanks

Cory K wrote:
Is the file open in Excel, or is it open because your VI is writing data to it somewhere in your code?
If the latter case is true, you can use a semaphore to ensure that a read and write operation are not trying to occur simultaneously.
The file is open in Excel.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I was using my flashdrive, then ejected. 5 min later I reinserted to be told "this machine cannot read the disk" Why would that be ?

I was using my flashdrive, then ejected. 5 min later I reinserted to be told "this machine cannot read the disk" Why would that be ?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Superdrive cannot read any disks

I don't know when it happened, but lately, my Superdrive won't read any disks. Music CDs, software, video DVDs, nothing works. I can't even use a blank CD. A few seconds after inserting a disk it is ejected, with no other notice from the system.
This is a 14" iBook G4, about 18 months old.
Has anyone experienced this, and is there a solution short of bucking up at an Apple service centre? I'll bet this is going to sting a little.

Can anyone tell me if this will work in an iBook?
http://www.pioneerelectronics.com/pna/product/detail/0,,207617573091302357597,00.html
Pioneer DVR-K06
The DVR-K06 slim-line internal DVD burner introduced by Pioneer offers many industry-leading technologies including:
• 8x Writing Speed on DVD-R, DVD+R, DVD+RW, 6x on DVD-RW, and 24x on CD-R/RW
• DVD-RAM reading and 5x Writing Speed
• Low Power Consumption
• 4X DVD Dual/Double Layer Writing
• Multi Effect Liquid Crystal Compensator
• Slim Design
iBook G4 Mac OS X (10.4.6) 1.5 GB

Aperture 2.1.2 cannot read date format in new iPhoto '09

I've noticed that when I import photos from iPhoto '09 to Aperture, the image dates all change to 12/31/00 from the dates input in iPhoto. This was not the case in iPhoto '08, so I assume iPhoto '09 uses a new date format that Aperture cannot read.
Has anyone else experienced this and is there an update to Aperture in the works that will correct this?

For anyone else trying to import photos from iPhoto '09 into Aperture while retaining creation dates and comments added in iPhoto, I wanted to post the steps that worked for me.
I am using Aperture v2.1.2, iPhoto 09 v8.01 (397), and System 10.5.6.
1. In iPhoto, add date created and comments in lower left Information box for photo.
2. In iPhoto, select all photos then choose Adjust Date and Time... in menu - change date by 1 second and select 'modify original files'. This will add the date you entered above in the Original Date in the photo EXIF data.
3. Select all photos you want to export from iPhoto to Aperture and export as JPEG, Maximum JPEG Quality, Full Size, and select 'Title and Keywords' - export to a folder
4. Open Aperture and import photos exported from iPhoto retaining All IPTC data.
Your photos in Aperture will now have the correct metadata in Aperture for original date and comments.
There may be a better way of doing this, but since iPhoto was updated to '09, this is the only way I have found to do what was straightforward in iPhoto '08.

When syncing my iPod photo it transfers 2 songs then gives error message ' cannot read/write disk' what wrong?

Can someone tell me whats going wrong when I manually sync my iPod with computer only 2 songs transfer to my iPod then I get error message ' unable to read/write disk ' the 2 songs are transferred to iPod and I have to keep starting the process over again, what can I do?

First, try shutting down (powering off) your computer and resetting the iPod
http://support.apple.com/kb/HT1320
Start up the computer, and connect the iPod to a direct USB port on the computer, if you have been using a USB hub. If there are other USB devices (other than standard keyboard/mouse) connected, you may want to disconnect them, as a test.
If that does not help, or you already did that, it is possible that the iPod's hard drive has become faulty. It is also possible that the hard drive is OK, but there is data corruption that is making the iPod's storage unreliable.
If the problem is not resolved, you should probably do a Restore on the iPod in iTunes. The Restore button is on the iPod's Summary screen in iTunes. This will erase the iPod, reinstall its software, and set it to default settings. If the cause is data corruption, the Restore (erasing the storage) should fix the problem. However, if the cause is a hardware fault on the hard drive, it will not help; the Restore may not complete successfully, which will leave your iPod inoperable.

Mail cannot read data from server

Hello!
I'm fairly new to Macs, having used a PC for 12 years, and am still getting used to it's little quirks.
I now have a problem where one of my email servers (a POP account) makes Mail (and Thunderbird for that) come up with;
The attempt to read data from ** has failed
Now, I know that the log on info is OK, as using my Webmail account, on the same iMac, accesses the mail fine. I've emptied the relevant mail account, both locally and on the server, removed the local settings and reset them using info on various Mac help sites.
Nothing that I know of has changed, I've ran and re-ran the reset permissions tool.
Can anyone give me any help?
Intel iMac 20" Duo 2ghz Mac OS X (10.4.8)

Hello, and welcome to the Discussions.
Has this POP account ever worked in Mail? Is the POP3 server in question unique to this one account, or do you have other accounts from the same provider, using the same POP3 server as the Incoming Server?
Ernie

Cannot enter data into table with column named DATE

I have a table as follows:
CREATE TABLE PACKINGLINE (
SNO VARCHAR2(13),
"DATE" DATE DEFAULT SYSDATE,
PRDORDNO VARCHAR2(12),
NOW DATE DEFAULT SYSDATE,
CONSTRAINT PACKINGLINE_PK PRIMARY KEY ("SNO", "DATE"));
Note the "cleaverly" named DATE and NOW columns (yes, that is the name of the column... our company was bessed with a very clear SQL server DBA in the past)
This SQL statement works:
INSERT INTO PACKINGLINE (SNO, PRDORDNO) VALUES ('1000808972', '100080897');
However when I try use SQL Developer as follows I cannot enter data:
1. Open SQL Developer
2. Click on "Tables" then on my table named PACKINGLINE
3. Click the "Data" tab
4. Click the [+] "Insert Row" Icon
5. Enter the same data as above
6. Click Commit
7. The following error is shown in the log window and I cannot commit the data change.
Error message
==================
INSERT INTO "DBO"."PACKINGLINE" (SNO, PRDORDNO) VALUES ('1000808971', '100080897')
One error saving changes to table "DBO"."PACKINGLINE":
Row 5: ORA-06550: Row 1、Column 25:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: Row 1、Column 7:
PL/SQL: SQL Statement ignored
==================
I can copy and paste the above query into a normal SQL statement window and the data commits fine.

Its so flaky there really must be something wrong Mr Adobe support person....
If I load a PDF, do nothing, gently save it, reopen and then waiting for my trial dialogue to wake up so that I can click on continue trial... then save as extended reader blah.... then close. I have finally saved one that works!!!! but how difficult is that????
WHAT IS WRONG ADOBE??

Problem while reading data from USB with JSR80

Hi
Iam using Fedora 9 with 32 bit.
Iam using JSR80 api to read the data from USB devices.
I successfully set-up the code as per given on JSR80 site on my eclipsce ide.
below is my code which iam using to read data from usb
import com.ibm.jusb.*;
import java.util.List;
import javax.usb.*;
import java.util.List;
public class USBReader {
public static UsbInterface interf = null;
     public static void main(String[] args) {
          try
        {// Access the system USB services, and access to the root
         // hub. Then traverse through the root hub.
           System.out.println("Application started");
         UsbServices services = UsbHostManager.getUsbServices();
         UsbHub rootHub = services.getRootUsbHub();
         traverse(rootHub);
         testIO(rootHub);
        } catch (Exception e) {
             System.out.println("The Exception occured"+e.getMessage());
      public static void traverse(UsbDevice device){
           System.out.println("Iam in traverse ");
           if (device.isUsbHub()){
                // This is a USB Hub, traverse through the hub.
                System.out.println("The device is hub");
                List attachedDevices = ((UsbHub) device).getAttachedUsbDevices();
                System.out.println("The attached devices size:"+attachedDevices.size());
                for (int i=0; i<attachedDevices.size(); i++){
                     traverse((UsbDevice) attachedDevices.get(i));
                if(attachedDevices !=null){
                     for(int j=0;j<attachedDevices.size();j++){
                          System.out.println("The device is"+attachedDevices.get(j));
       else{
          // This is a USB function, not a hub.
          // Do something.
            System.out.println("The device is not hub");
      public static void testIO(UsbDevice device) throws UsbClaimException, UsbNotActiveException, UsbDisconnectedException, UsbException{
           System.out.println("Iam in testIO");
          try{
             // Access to the active configuration of the USB device, obtain
             // all the interfaces available in that configuration.
             UsbConfiguration config = device.getActiveUsbConfiguration();
             List totalInterfaces = config.getUsbInterfaces();
             System.out.println("The Total interfaces: "+totalInterfaces.size());
             // Traverse through all the interfaces, and access the endpoints
             // available to that interface for I/O.
             for (int i=0; i<totalInterfaces.size(); i++){
                interf = (UsbInterface) totalInterfaces.get(i);
                System.out.println("The interfaces are "+totalInterfaces.get(i));
                String strinf=interf.getInterfaceString();
                System.out.println("Claimed Status: "+interf.isClaimed());
                System.out.println("Active status : "+interf.isActive());
                System.out.println("Settings :"+interf.getNumSettings());
                //interf.release();
                interf.claim();
                List totalEndpoints = interf.getUsbEndpoints();
                for (int j=0; j<totalEndpoints.size(); j++){
                   // Access the particular endpoint, determine the direction
                   // of its data flow, and type of data transfer, and open the
                   // data pipe for I/O.
                   UsbEndpoint ep = (UsbEndpoint) totalEndpoints.get(i);
                   int direction = ep.getDirection();
                   int type = ep.getType();
                   UsbPipe pipe = ep.getUsbPipe();
                   pipe.open();
                   // Perform I/O through the USB pipe here.
                   pipe.close();
                interf.release();
          } catch (Exception e) {
               System.out.println("Exception in TestIO"+e.getMessage());
               e.printStackTrace();
}When i execute the above code i get the following exception
Exception in TestIOCannot claim an interface on a virtual root hub.
javax.usb.UsbException: Cannot claim an interface on a virtual root hub.
     at com.ibm.jusb.VirtualRootUsbHubImp$VirtualRootUsbInterfaceOsImp.claim(VirtualRootUsbHubImp.java:143)
     at com.ibm.jusb.os.DefaultUsbInterfaceOsImp.claim(DefaultUsbInterfaceOsImp.java:54)
     at com.ibm.jusb.UsbInterfaceImp.claim(UsbInterfaceImp.java:109)
     at com.ibm.jusb.UsbInterfaceImp.claim(UsbInterfaceImp.java:83)
     at USBReader.testIO(USBReader.java:60)
     at USBReader.main(USBReader.java:15)iam not getting the clue for it .

Cannot claim an interface on a virtual root hubSo don't do that? I have no idea how to tell, but clearly you need to test a few more attributes before you claim. Or else just log the claim error and continue with the next interface.

Snow Leopard cannot read Files or Folders with Accents written by Windows 7

I upgraded to snow leopard on launch date in the process of ripping all my music to ALAC in OSX.
I brought it over to windows to encode it in the batch encoder in DV poweramp using Windows 7 RC1.
When I tried to copy the files back to OSX it could not read any files or folders with an accent in their name if they were written by windows. It thought the folders were aliases and kept trying to figure out what was wrong and mp3s it just continually tried to load.
It cannot read them on both FAT32 and NTFS partitions however plugging the FAT32 drive in a Vista computer it was perfectly able to read the files. Any ideas why this might be? I may try writing a file with an accent in the name via Vista later.

Whats odd, accents aren't giving me a problem but a little square unicode character is.
http://www.fileformat.info/info/unicode/char/25a0/index.htm
That is sorta what it looks like, maybe a bit smaller, windows can't open folders with that in it.
Mac chokes on your a accents e and all other varieties.

Read data from MCU with bluetooth with using labview function ?

Hi.
I send data from MCU to labview. I do this work with usb to serial pl2303TA and it work well.
recently I decide to use bluetooth for communicate between MCU and LV. MCU use a bluetooth module like HC-05 or BC-04.
with using VISA read functions we just use a VISA configured serial and read functions.
in bluetooth we must use which functions for receive data ? and where we can use them ?
I use bluetooth discover function and it show my phone or module ID. what are other steps for reading data ?
Thanks.

As Dennis_Knuttson pointed out, if you associate a COM port to your bluetooth adapter on your LV PC, you can just use very simple VISA functions.
Maybe this example can help you how to do this (this one is an Android<-PC serial comm via bluetooth):
https://decibel.ni.com/content/docs/DOC-39917

Why doesn't my Atapi dvd burner read data disks?

I've burned some work files from work onto a dvd on a mac intel and took it home and my dvd player won't read it. Does anybody know why?

THAT is how MY problem first started! Last year I discovered my DVD-R (Matshita, on a 2009 iMac Intel Core 2 Duo 2.4mhz etc.) drive would not even accept anything but a MUSIC CD... within weeks, even those failed to play. I've posted thewhole long tale in another area, so am not going to hijack YOUR thread by repeating it here. But, Apple, what gives?? There is a HUGE problem going on with this particular DVD-R drive and we need HELP! I've already spent MONTHS following instructions here (end even elsewhere) on trying to get it working again, to no avail - worse, my AppleCare just expired on me 2 months ago, when I THOUGHT I had another 6 months AND that I'd get my DVD drive working again on my own, anyway...).
RECALL, please?
Loyal Apple customer since 1994 (but dismayed, all the same),
Shea

CD Rom drive not reading data or audio

Hello -
I'm using a Fujitsu N series LifeBook laptop. I'd started having problems with my cd rom drive about 6 or so months ago. It reads dvd discs just fine, but is very "selective" about the audio cds i load. I got a palm pda for christmas and when i tried to load the sync software from the cdrom - the drive wouldn't read it at all. I tested other audio cds and have since found that the drive will no longer read any audio discs. Oddly, it reads dvd movies just fine - launching Windows Media Player as a default. I got in contact with Fujitsu tech support, and after uninstalling/reinstalling the cdrom, found the problem was still there. I was told to contact iTunes support because iTunes might be the culprit - but could only find these forums for help.
Cdrom drive is a TEAC DW-224E-B model. Please help - I'm a nursing student and plan on using the palm pda to store PDR's and Diagnosing guides.
Thank you,
Erick

here is the report generated - and thank you
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU N6010
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: ATI MOBILITY RADEON 9600/9700 Series \ATI MOBILITY RADEON 9600/9700 Series
IDE\DiskFUJITSUMHT2060AT_PL____________________0022___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTEACDW-224E-B__________________________4.6A___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: TEAC DW-224E-B, Rev 4.6A
Drive is empty.
it says the drive is empty after i've inserted the palm cdrom into the drive

CD-Rom Drivers cannot read data disk burned with PC

Similar Messages

Maybe you are looking for