CD-ROM install will not load
I am getting an error message that says, "setup wizard MFC Application has encountered a problem and needs to close. we are sorry for the inconvenience. So, I look at the instructions and it says to use D:\setup.exe. so I do that (except I use 'E') and I get an error that says,"Windows cannot find 'E:\setup.exe'. Make sure you typed the name correctly, and then try again. The brouser gives me the option for the free NAV trial and that will load up fine but I can't get the wizard to run. Any ideas?
Try EASYLINK CONNECT
Similar Messages
-
New install will NOT load r8169 net module
After doing bad forced upgraded did new install with
10/9 iso. Install the base base-dev . rebooted to NO network.
with lsmod showed r8169 not loaded. [have openSUSE 12.2 on box using the r8169]
modprobe -va r8169 [ nothing on sysout and no load]
added file /etc/modules-load.d/r8169.conf with r8169 in file.
rebooted no load; journalctl showed this error:
system-modules-load [223] failed to lookup alias r8169 function not implemented
tried same file at /run/modules-load.d/ [ no error or no load]
Other strange on this load: at login linux 3.3, the /usr/lib/modules3.6.6 ??Other strange on this load: at login linux 3.3, the /usr/lib/modules3.6.6 ??
There's at least a few typo in here somewhere, but I'm guessing that you're trying to imply that there's a mismatch between the running kernel and the modules on disk. You've probably fubar'd a kernel upgrade by not having /boot mounted. You should fix that. There's probably a lot of other modules that aren't being loaded.
Last edited by falconindy (2012-10-21 04:40:50) -
I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470
I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470
-
I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual. -
since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOELSome how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none -
I installed windows ultimate 64 bit, Tried to install firefox for my default browser. Internet explorer loads everything like normal, no problem but firefox will not load or does after 5 mins +
I checked my firewall windows provides and Avira to see if they were blocking, Found nothing of anything being blocked.
This is a fresh installed windows 7, No viruses or malwareStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
Firefox will not load web page (I also have Internet Explorer 8 installed).
Fire Fox will not load web pages. It may have something to do with proxy settings but I have reset this to Auto-Detect which is where it has always been in the past but still nothing. Something has reset my proxy settings in the past which caused a similar problem but doesn't seem to be the issue this time. I have Internet Explorer 8.0 installed on computer right now and it seems to work.
After looking into this further I checked firewall settings in Panda A.V. For Firefox they were set to Custom settings which effectively disabled it. I changed setting to Outbound only like Internet Explorer and other programs and Firefox seems to work fine now. Hope this helps others who have experienced this problem. I have teenage children who use computer a lot (Face Book, etc.) so the root of the problem may have been Malware, Adware, or something else but hopefully Panda has taken care of this.
-
will not load gmail I have to use html but will work in windows exploder and chrome
https://mail.google.com/mail/?hl=en&shva=1#
and ebay does not load in full looks like it did 10 years ago
the tab to export my bookmarks is gone so I cannot delete it and re install it
I have used fire fos for years and feel it is vastly superior please helpOk Guys and gals, Here is a CLUE ! I have the same problem as listed above. Here is the clue, but I don't know how it figures into the scheme of things.
I have 2 users set up for my vista OS. The admin user, Fire fox 6.02 works fine. The second user is my name and its fire fox 6.02 is screwed up. I can load Gmail, yahoo, Boost mobile and others in the second user login. But if I log in as Administrator the Fire fox is fine. Fast, clean and stable.
So Some how my settings in the user #2 is or has corrupted and or changed ! I didnt do it, Firefox somehow changed the settings or became corrupt in my #2 user login account using Firefox 6.02.
Now I have tried to use a new user in fire fox and that did not fix firefox for user #2 on Vista.
I also disabled AD BLOCKER and that didnt help either.
SO my only observation is that the VISTA user #2 account utilizing FireFox 6.02 has changed some how and won't load web pages properly.
Vista User account #1 Fire fox works Fine...
Any idea? how to get user accounts FireFox 6.02 to work properly ? -
XP OS, have NoScript installed, disabled, Java console still will not load from FFx.
I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards -
Installed Dreamweaver and now my Photoshop 5.5 will not load.
I just paid for, downloaded and installed Dreamweaver/Creative Cloud and now when I try to start Photoshop 5.5 the program will not load (not responding.) Anyone have a fix for this?
Also... here are the details in the "close window box".
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangXProcB1
Application Name: Photoshp.exe
Application Version: 5.0.128.0
Application Timestamp: 377aeb69
Hang Signature: 15b9
Hang Type: 32
Waiting on Application Name: Adobe CEF Helper.exe
Waiting on Application Version: 2.9.1.474
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Hang Signature 1: 15b9637c1870353073a48b8c42420590
Additional Hang Signature 2: bcb0
Additional Hang Signature 3: bcb02abbce45adbdf96aa5831a7f6ae8
Additional Hang Signature 4: 15b9
Additional Hang Signature 5: 15b9637c1870353073a48b8c42420590
Additional Hang Signature 6: bcb0
Additional Hang Signature 7: bcb02abbce45adbdf96aa5831a7f6ae8 -
K7N2G will not load windows xp with any type of dvd/cd drive installed?
This is on my old computer, the specs are as follows
k7n2g
athlon 2600+
radeon 9700 pro
Caviar SE wd800
1gb samsung ddr333
It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
Thanks
Chris
PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
two Opteron 250 90nm
2gb 2-3-2-6 Corsair Reg/ECC DDR 400
Tyan Thunder K8WE
1x BFG 7800GTX OC (one for now)
Audigy 4 Pro
Seagate Cheetah U160 10k 73.4 gb
Atlas V U160 18.3 gb
Lite on Dual Layer burnerYour Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
So let us get this straight.
This system used to work fine? Yes? Then what prompted you to reload the OS?
You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
A little more history might prove useful in helping us to give you better suggestions.
Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
+3.3V@22A, +5V@21A, +12V1@18A, +12V2@16A
Is this correct?
Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
Did you try clearing the CMOS and then initialize the default settings?
Do you have a cheap AGP card to try instead of the 9700? -
Since installing Mavericks I'm getting a message that Shockwave will not load
Since installing Mavericks yesterday I am now getting a message that apple cannot load Shockwave Flash - cannot play any games on Facebook because Flash will not load - tried disabling the oldest of 2 versions but that made no difference. Any suggestions?
I did a full factory reset on the Apple TV and then set evrything up again. Synced all my stuff from the computer, which seemed to download ok, but still get the "Your Apple TV is not authorized to play this content" message. It's very frustrating. All the content was purchased from the iTumes Canada store, I'm in Canada but can't watch it on the TV. I tried changing to the US store but same message. I think I'll just give up. This is the first time I have ever had a problem with an Apple product and I have never used anyrhing else but Apple. Thanks for your help anyway it's much appreciated.
-
have had to re-install everything on my computer but Photoshop elements 11 disk will not load. Help?
you can download the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.< -
The Firefox application pops up but will not load . All I get is the spinning ball that I need to force close. Rebooting doesn't seem to help.
Any ideas for a fix?Hello BobbyRiley, any luck if you '''trash''' the current Firefox application to do a clean install ?
1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
thank you -
PE 9 will not load after installing Elements 10
Installed Elements 10 on Vista 64-bit. Did not uninstall Elements 9. Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk. There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2. Tried disk 2 of 3 from package, nothing happens.
Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
From: Steve Grisetti
Sent: Monday, January 02, 2012 7:09 PM
To: cptiger
Subject: PE 9 will not load after installing Elements 10
Re: PE 9 will not load after installing Elements 10
created by Steve Grisetti in Premiere Elements - View the full discussion
Maybe you are looking for
-
Installing Windows 7 on Late 2013 iMac w/ Fusion Drive
Sorry in advance for the long post, but I have tried to exhaust all possibilities, and bring as much knowledge about our environment to the table to avoid confusion. Here's our goal: Install Mac & Windows on a Late 2013 iMac with a 1TB Fusion Drive
-
How do I successfully merge MXF and DV files in a sequence?
I have a Panasonic with a P2 card (and DV film). I have a reader. I have successfully transferred all the files to my computer, and imported them into PP6, no problem. My only issue is this: if I want to consolidate the MXF files with the camera's
-
Hi i bought a phone off of Craigslist and the phone was never deactivated by the previous owner. I cant contact the previous owner. How do I unlock it?
-
Hi everyone! I'm getting the attached error when I open up a file, supposedly a CS5 document. I own CS5. Are there plugins I need to install?
-
Xorg does not start (timeouts) with "no screens found"
After years of my system working correctly, this has been happening for the last ten days. Many times - not all of them - xorg does not start, and I get greated with the standard console login prompt. Checking in /var/log/ the xorg.0.log, it says tha