CD-ROM not detected on notebook, but tested on another machine and works.
I am checking my dad's laptop, a Compaq Presario F700 (F761US). It has a couple of problems, but the main one is that the DVD drive is not detected by Windows Vista Home Premium 32 bit. The BIOS doesn't seem to detect it either when I put a bootable disc and try to force it to boot from the drive; it only detects the hard drive.
I have even removed the drive and tested on another machine and it DOES in fact work.
I even upgraded the BIOS to the latest version (F.0.A) to no avail.
Hello MysticalChicken. I understand you're having some trouble with your CD-ROM.
First, install those service packs! Those are very important updates.
Have you tried cleaning the inside of the CD-ROM with canned air?
The "whirring/clicking" noise leads me to believe this is a mechanical problem. The click could very well be the disc touching something while it is spinning at a high speed. Let me know if cleaning the CD-ROM has any effect on the noise.
Have a wonderful day and I'll keep an eye out for your reply.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.
Similar Messages
-
Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.
Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem. -
Cd rom not detected in boot device selection list on hp compaq 2230s
Cd rom not detected in boot device selection list on hp compaq 2230s
unable to install operating system please helpHi,
If the CD/DVD drive is not showing as a bootable device, then it could well be a hardware failure of the drive itself. The first thing you could try is to reset the bios defaults, save the changes and see if this helps. Next, I would check the connection of the CD/DVD drive in case that is the problem.
On the link below is the service manual for your PC. Page 50 explains how to remove, and if necessary, replace the CD/DVD drive. It also has the parts numbers should you require a replacement.
http://h10032.www1.hp.com/ctg/Manual/c01601955.pdf
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
It's not jailbroke or anything but it says the terms and conditions have changed. When I agree, it says your session has times out. Try again. But it doesn't give me an option to try again and has a done button underneath it. I press done. The textplus app says "Waiting..." and is gray. What can I do to download this app?
iTunes has to contact Apple to send your agreement to the new conditions, but your security software has to allow this contact. If blocked, you'll get a time out message. Follow the instructions here to check your security software settings: iTunes for Windows: Troubleshooting security software issues
-
1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results. -
Hello
I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it with a pin, resetting it while plugging it in, and trying to find it in airport express setup (the setup assistant can't find it at all).
What am i doing wrong?How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX. -
Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet?? what can I do?
Usually it's because you are not making internet connection via wifi. Open Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
My iPad has been stolen. I Do NOT have iCloud account but I have apple ID and serial number. Can i locate it with these available options?
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
Safari won't open pictures on imgur. To test used another browser and it showed them
Safari won't open pictures on imgur. To test used another browser and it showed them
Here is the page was trying to surf http://imgur.com/gallery/n9BjmFrom the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit. -
I have a problem with my dv7 6100er notebook on Win7. Camera TrueVision HD is not detected in YouCam or skype or device&printers, but in device manager it determined and show that work fine. TrueVision HD camera drivers contains two files: usbvideo.sys and ksthunk.sys. What I tried: delete TrueVisionHD webcam from dev. manager and reinstall it, install default Microsoft usb camera diver, uninstall and install YouCam (Virtual camera driver of YouCam also unistall and install). No result. And also lamp in the camera does not light up never.
What I can also to do? Thanks.I read all posts in this topic, but all the problems in that topic is no camera in the device manager.
I see truevisionHD camera in my dev. mamager. Just in case I checked webcam connector. No result.
And just in case my HP TrueVisionHD vid_064E & pid_e258. -
Battery not detected for notebook pc hp pavilion dv2500
HiI am using notebook hp pavilion dv2500 with AC adapter, Even though the battery is connected the system is not detecting the battery
Problem is in Your Motherboard, Replacing Your MB is the recommend option. but you can try by ask a electronic Eng. to repair your MB
**Say "Thanks" by clicking the Kudos Star in the post that helped you.**
**Please mark the post that solves your problem as "Accepted Solution"**
Dan Asee -
External HD not detected in MacBook but iBook
Hi All:
I have below systems with me >
* iBook G4 running Tiger with 1GB memory
* Previous MacBook running Tiger with 2GB memory
* New MacBook running Leopard with 4GB memory
* New iMac running Leopard with 4GB memory
I have a 100GB external HD connected to my iBook for 2 years now, via USB. And my Previous MacBook used to read and access data from the same HD too. I dunno if I have changed any setting or any software update technically forbid the access from any other Mac systems except iBook, which I bought with.
In iBook, the external HD works perfectly. I eject it, connect it to any of my MacBook now, the light on the device is turned on but nothing moves in Finder. There's no icon, unlike in iBook where a USB HD icon appears below Macintosh HD. I tried to partition and erase everything, remain Mac OS (Journaled) format, but no luck. It's properly detected and accessible by iBook but not any others.
Have I possible changed anything without knowing it ? Can someone share with me what to do next ? The external HD works well but I dun understand why none of other Mac systems recognise it, except the original iBook. Thank you.Hi:
I am using a 100GB from Samsung. Should have mentioned earlier. It's USB-powered. I never use it with any adapter. I just plug it into iBook G4 and in less than 2 seconds time, drive pops up in Finder perfectly.
However with MacBook running either Leopard or Tiger, the light will be on and you hear it spinning. I tried to plug in adapter last night, still no luck.
I re-partitioned to GUID or Master Boot or Apple, either Mac Extended (Journaled) or MS-DOS, none of them works.
Then, last night I tried to boot-camp Windows XP and to my surprise, it was detected without any problem ! Oh...... So now I think the problem is not in USB port, not in the power adapter (which I never use), not in the format, it's in Tiger or Leopard for MacBook.
Tiger I use on iBook G4 is 10.4.11 (no problem at all)
Tiger I use on MacBook is also 10.4.11 (not detected but light is on)
Leopard I use on MacBook is 10.5.2 (not detected but light is on)
I spent so much time transfer data from external HD to iBook then to iPod then to MacBook. I just dun understand. Thank you for all your posts. ^_^ -
I have had this problem since yesterday. My macbook air is not detecting the home wifi network it used to be connected to. A manual addition of the network is also not working. I also tried using network utility which gives the details of all networks available and their details, but the home network does not feature there.
However, my iPhone is able to connect to the home wifi without a glitch. I am right now using a mobile data card to access internet, but need to get back to the home network.
I found various users posting the same problem online, but am yet to find a conclusive problem. Here are two threads on apple support which are similar to my case.
https://discussions.apple.com/thread/2445976?threadID=2445976
https://discussions.apple.com/message/10695921?messageID=10695921&start=1#106959 21?messageID=10695921&start=1
Please help!It was not working for me either and I spent a day looking at things other people did when they had similar problems. Never could find a conclusive response and what has been suggested here was always almost the only thing mentioned. I wish you luck and hopefully someone can actually point out the one true thing that is doing this!
This is the exact sequence of events: I switched off the main supply to the house when I was going out, and when I came back this problem occurred. I was searching desperately online and just when I had given up, I decided to switch mains off and then back on. It picked up the wifi, and has been working since. This was a shocker and mostly a coincidence. Wont hurt to try. -
Hi,
i have a peculiar problem,
I have a sbrio 9642XT mounted on an aluminum plate (also connected to earth ground) along with 9213 thermocouple on slot 1 and 9477 digital out module on slot 3.
previously this setup used to be on an acryllic plastic plate. and now when i shifted to the aluminum plate the thermocouple module is not being detected by labview project under chasis, while the 9477 is still being detected.at slot 3
i placed an analog inpt 9205 module on slot 1 just to see if there is a problem with slot 1, and yes the new module is also not detected on slot 1,
so placed it on slot 2 and now the thermocouple module is detected and works fine on slot 2.
the attached picture shows the Ungrounded T- type of Thermocouple Probes that I use , these are immersed in ice water and in some other inert liquids to read the temperature
so my question is, is the problem related to grounding issue caused by liquids and did it ruin the slot of the SBRIO some how or is the sbrio just got faulty after using for an year. or is it got something to do with the mounting on aluminum plate (earth ground)
also i never used slot 2 before.
is there a way to test in any other way to know if the slot 1 is ruined because of the above reasons or is it a software issue
i dont want to ruin the slot 2 of the sbrio by placing that thermocouple module. please help
many thanks,
Attachments:
thermocouple picture.pdf 105 KBHi Freemason,
Nothing you have described should be causing a slot to stop working; as long as the sbRIO is properly mounted and not touching the backplane, it shouldn't be a problem. If your slot 1 is not working, you could also send the board in to National Instruments for repair. Are you still under warranty? -
unable to play video on www.iranibash.com, it says that MS Silverlight is not installed. But it is installed and works with IE9. I have uninstalled and reinstalled the plugin but it still says it's not installed in Firefox 5. When I try to install it, it says installation failed.
Forgot to mention that it won't play Netflix either.
Maybe you are looking for
-
Service not registered with listener on one of the nodes?
We have an 11.2.0.1 oracle RAC with 2 nodes. Recently the listener died on node 1 and after a manual startup it seems like the service doesn't register with the listener on this node. Here's what statusing the listener on both nodes shows: [oracle@db
-
How to authorise a computer on iTunes using the updated version?
I've accidentally deauthorised my computer on iTunes and I'm finding it difficult to find the solution to reauthorise it. Please help!
-
Export QuickTime movie with Compressor running in background
I've rummaged through the forums many times to figure out the absolute fastest way to get an FCP sequence compressed for DVD Studio Pro while maintaining the best quality. I always seem to come up with: Export QuickTime Movie (not self contained) -->
-
How to consume SAP enterprise services over https using third party tools?
Hi guys, am just testing consumption of ES using jboss instead of NW for client applications. The ES in our internal ERP are bit strange, ie. they are using HTTPS transport even though you can configure ES with HTTP transport. (in this case, the requ
-
Last night 1 of our 2008r2 sp1 Enterprise crashed and auto rebooted. With the debugger tool I checked the minidump and at the bottom it states: Probably caused by : srv2.sys ( srv2+212e ) This is the SMB driver. There is a KB that acknowledges that t