CD-ROM not working on my Equium - error code 39

Hi,
My CD-Rom is not working.
Checked it on the Control Panel, Device Manager -
It shows a yellow mark against it with the following message:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
I deleted it and restart the computer but the problem remain. I wonder where might I find the relevant driver, since I thought Vista would have the driver to be able to load it again automatically.
You kind advise would be greatly appreciated.
Regards, Philip

Hi!
The error code 39 is very common issue but it can be solved very easy:
So check the MS knowledge base:
http://support.microsoft.com/kb/314060/en-us
Bye

Similar Messages

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium

DVD Drive not working Satellite Pro A100 - error Code 37

Hi
Anyone help on this?
I have an A-100 and the DVD drive has stopped working in XP. I've checked device manager and XP see's the drive but returns this error 'Windows cannot initialize the device driver for this hardware. (Code 37)'
I've also noticed that ASAPI.sys is not running in task manager.
I'm guessing this has got something to do with the problem.
I've tried reinstalling device drivers but this has made no difference. Any suggestions?

Hi
The error code 37 means the driver returned failure from its DriverEntry routine.
You could try to remove the driver from the device manager and after new reboot the OS should recognize the device drive and initialize the driver again.
If this does not help try this procedure:
Run REGEDIT and open up the following folders:
HKEY_LOCAL_MACHINE
-> SYSTEM
-> CurrentControlSet
-> Control
->Class
{4D36E965-E325 -11CE-BFC1-08002BE10318}
After clicking on {4D36E965-E325 -11CE-BFC1-08002BE10318} you should see two settings on the right-hand side:
"Upperfilters"
"Lowerfilters"
Click on each of them, press DELETE and click YES.
Then reboot the notebook and check if it was useful.

Creative cloud not work !!! error code : download failure.....I'm paying your site but can not find the answer to my problem

download failure

There are few steps that I could suggest that might be resolve the conflict for you, Please follow the below mentioned steps and do let us know if this worked or not.
1) I can see that Time Machine is active in the background. Can you please open the Preferences for Time machine and disable TIme machine and try again.
2) If the step 1 doesn't work, please try a different network and check again.
3) If none of the options above works, please navigate to Utilities> Adobe Application manager and make sure that we have full READ & WRITE permission on this folder and Utilities> Adobe Creative Cloud folder.
Also, navigate to /LIBRARY/APPLICATION SUPPORT/ADOBE and give the READ&WRITE permission to the all the user accounts.
4) Post this, try again.
Do let us know if this worked for you or not.

HT202157 New apple is not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.

I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?

Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error.

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it.

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

Goods receipt not possible for delivery 800015869: error code 1

Dear friends,
I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
Goods receipt not possible for delivery 800015869: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
Any poniters to check the setting in PO or delivery or any setting in SPRO.
Regards
Ashutosh

Hi Anupam,
That is the requirement of my scenario
That is happening in intercompany posting.
I am explaining to you.
say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
I have two company codes X and Y
One DC (A) belongs to X and second store (B) belongs to Y.
I have stock available for say article ( am working here in IS Retail instead of material ) in both DC --A and Store --B.
Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
Now I did delivery thru VL10B and then picking and then PGI.
Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
So now total stock in DC=400
Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
and stock of receivibg store (B) will increase by 100 nos.
But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
But there is another stock in transit available=50
Now why GR is not happening against delivery but it is happening against PO???
Any pointers

WHAT IS THE FIX TO THIS ERROR: XML Parsing error: not well-formed (invalid token) (error code 4)

Hello, looking to see if there's anyone out there who knows how to resolve this error from popping up when I open a previously saved adobe file with data populated inside (tax form).
The error states:
XML Parsing error: not well-formed (invalid token) (error code 4), line 16028, column 2 of file.
So when I go to open this file, THAT ERROR appears. But then allows me to view the content inside the PDF (tax form) - however it will not allow further editing - this is an issue.
This began after working and populating certain files, then transferring to a hosting site. Now when I open any PDF file from the hosting site, the error appears. Could just be coincidental however throwing that out there in case it's useful.
What causes this error & what is the fix?
Cheers!

Unfortunately No. This was a tax form downloaded from IRS.gov. The PDF file has been populated and saved off. I believe the file has somehow become corrupt. Curious how to cleanse the file so it opens without issue (that error message).
Thanks for your response

We set up Airprint to our Xerox machine but we have codes set up so each department has to enter their code in before they print. Airprint will not work because we have the codes. Does any one know if there is a way to override this?

Hello there-
Our Xerox rep helped us set up Airprint to our copier machine. We have department codes set up on our copier so when any one goes to copy or print something they need to punch their code in. Airprint will not work because we have those codes (something prints out to the copier saying error due to accounting codes being set up). Does anyone know if there is a way to override this on our ipads? Thank you!!

Hi Nico,
if you want a local test/development setup of Oracle why don't you just install Oracle 11gR2 XE (http://www.oracle.com/technetwork/products/express-edition/downloads/index.html) ?
If you install this you get a database, APEX (4.1), client etc all in one install, this includes a webserver (EPG) on port 8080 without having to configure anything. It's a simple next-next-next installation without much configuration.
If you would like to seperate database and software you can always do this later when you understand the concepts of database/control files etc.
If you would like to upgrade to APEX 4.2 you can download this afterwards and easily install this by running two scripts in SQL*Plus ( apexins.sql and apxldimg.sql ), just check the apex 4.2 installtion guid section EPG for this.
Regards
Bas
b.t.w. If you're running windows 7 - 64 bits just use the 32 bits XE for windows, might get some warnings but you should be able to install and run, good enough for test/dev

Goods receipt not possible for delivery 80016425: error code 4 in MIGO

Hi friends,
I created STO from ME21N tr.code(document type:UB), then I created outbound delivery from VL10B tr.code based on STO.
After that, goods issue is made by vl02n.Lastly , when I want to make a goods receipt based on outbound delivery from MIGO
(with mvmt type:101),it gives me error about"Goods receipt not possible for delivery 80016425: error code 4 in MIGO tr.code" .
Take your opinions

Hi,
Error 4 indicates there is/are no delivery item/items.
Check following options:
option-1--->Check material number extended to the both plants with storage locations
option-2--->Check the material received already WRT the delivery
option-3---> Check confirmation control key in material that needed in creation of an inbound delivery to have GR process
option-4--->Check The latest goods receipt date in STO
option-5--->Check(done any setting) if any billing to be done after PGI and then can do GR WRT delivery
Regards,
Biju K

Goods receipt not possible for delivery 800001597: error code 4

Hi,
When doing goods recipt for outbound delivery in MIGO, I am getting the below message:
Goods receipt not possible for delivery 800001597: error code 4
When going in details of error messgae:
For error 4 : Check the delivery and its document .
Document flow is as below:
Step 1. PO Created
        2. Delivery created with ref to PO
        3.Picking
        4. Shipment Created
        5. Goods Issue complete.
Now what i have to check.
Thanks in advance.
Regards

Check the link Re: MIGO
Also check OSS Note 458770 - GR for outbound delivery shipping units with batch split and Note 314765 - M7865 during GR f. delivery w/ default values 102 if it applies to your SAP version.
Regards

Goods receipt not possible for delivery 80172554: error code 8

Hi all,
I got this error but the description does not helps to understand the issue.
Goods receipt not possible for delivery 80172554: error code 8
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
CD

Please check this answered link:
Re: MIGO
Re: Inter comapny PO-
Goods receipt not possible for delivery 800015869: error code 1
STO Problem while doing GR against outbound delivery
Edited by: Afshad Irani on Jun 2, 2010 7:13 PM

CD-ROM not working on my Equium - error code 39

Similar Messages

Maybe you are looking for