CD that is not visible

I put an erased R/W cd into the discdrive and it has disappeared. I cannot eject it as the computer doesn't know it is there. It isn't in Finder. It isn't on the desktop. The eject button gets no response. The eject option on the file menu is greyed out.
Yesterday I erased the disc in order to create a disc with an open session. Today I wanted to try doing that, but it has disappered.
When I put it in, the drive started up as though it was going to read the type of disc, etc, then stopped and now nada.
Help! I can't do anything else with the drive now.
Thanks
LJ

You're welcome.

Similar Messages

TS1292 There are two numbers that are not visible in the middle of the code What can I do?

There are two digits that are not visible in the middle of the itune code. How can I still access this card?

Click here and request assistance, supplying as much of the code as you can.
(74408)

Field that is not visible in my editing screen but showing in web preview. How to remove it?

Hi Support,
When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
Further information:
I do not have any rules set for any of my fields
I have tried to remove it in Chrome, IE and Firefox
My cache has been cleared today
My plug-ins and flash player are all current versions (updated today and performed a restart)
Thanks,
Kate

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

There was an attempt to change the value of a control that is not visible.

I am getting the below error on submitting on a screen.
"There was an attempt to change the value of a control that is not visible. The submitted value for this control has been discarded."
I am setting the values of the controls in "OnGetScreenEventHandler, OnInvestigationEndedEventHandler" implementation. Is there any way to check if the control is visible?
Thanks,
Rajan

Hi,
How Do I Check for the control Visiblity in the above said event handler?
Here is my code
private void formattAllDate(SessionContext currentContext) {
     log.debug("R2_XSR: Formatting all date");
setGlobalInstanceValue(currentContext,"Date1",formatDate(getGlobalInstanceAttribValue(currentContext, "Date1")));
setGlobalInstanceValue(currentContext,"Date2",formatDate(getGlobalInstanceAttribValue(currentContext, "Date2")));
setGlobalInstanceValue(currentContext,"Date3",formatDate(getGlobalInstanceAttribValue(currentContext, "Date3")));
setGlobalInstanceValue(currentContext,"Date4",formatDate(getGlobalInstanceAttribValue(currentContext, "Date4")));
setGlobalInstanceValue(currentContext,"Date5",formatDate(getGlobalInstanceAttribValue(currentContext, "Date5")));
setGlobalInstanceValue(currentContext,"Date6",formatDate(getGlobalInstanceAttribValue(currentContext, "Date6")));
setGlobalInstanceValue(currentContext,"Date7",formatDate(getGlobalInstanceAttribValue(currentContext, "Date7")));
private void setGlobalInstanceValue(SessionContext currentContext, String attribute,Boolean value){
     try{
          currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance().getEntity().getAttribute(attribute).setValue(currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance(), value);
     }catch(Exception e){
          e.printStackTrace();
private String formatDate(String dt){
String newdt[]=dt.split("/");
if (newdt.length==3){
return newdt[1]+"/"+newdt[0]+"/"+newdt[2];
return "";
}

How can I delete flagged emails that are not visible in my account boxes?

Currently I show 43 flagged emails but not in any of my accounts is there a flag. I am not sure if I deleted them early in learning to use my iphone 4s or what. Certainly I had flagged email messages in the past. Any suggestions? I have tired going into my various email accounts on the iphone and checking all of the deleted emails for each account. I only found seven flagged messages.
Much appreciation for any suggestions.
Thanks!

Hey OldCT!
I have a link here for you that may help you find your flagged messages a little more easily:
See important messages - iPhone
http://help.apple.com/iphone/7/#/iph3caefa61
Flag a message so you can find it later. Tap while reading the message. You can change the appearance of the flagged message indicator in Settings > Mail, Contacts, Calendars > Flag Style. To see the Flagged mailbox, tap Edit while viewing the Mailboxes list, then tap Flagged.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Customise an ASPX in the layouts directory that is not visible in SharePoint Designer

Hi
I want to be able to deploy a customised ASPX page in a Visual Studio WSP solution to my site. There is a file named CopySharedPage.aspx which is used for the dialog that pops up when you edit a page that has multiple friendly URLs. Our users get confused
by this and several of them have clicked the option to 'Edit page for single URL (my page url)' which does this "Create a copy of the page for the URL you were just on to edit it
independent of other URLs." We don't want them doing that. In our site we often have multiple URLs for marketing reasons, but only want to maintain the one physical page of content. I can edit the CopySharedPage.aspx file in
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS directly on the server and comment out or delete the section that creates the link to Edit page for single URL (which consequently creates a copy of the page).
But I would prefer to do this as part of my VS solution to make deployment easier. In my solution I have branding files such as master page, layouts and search assets such as a custom refiner and modified Item_Default.html. All of those items can be found
in SharePoint Designer and they can also be replaced by having a module in VS with those files and with entries to place them using elements.xml in the module.
I tried to do the same with the CopySharedPage.aspx but it doesn't overwrite the one on the server. This is my elements.xml for the module:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="LayoutCustomisations" Url="_catalogs/layouts">

<File Path="LayoutCustomisations\CopySharedPage.aspx" Url="CopySharedPage.aspx" ReplaceContent="True">
</File>
</Module>
</Elements>
I end up getting a CopySharedPage.aspx created at
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\MyWebsite_Site\LayoutCustomisations\CopySharedPage.aspx but it isn't used. The original one is still there in the 15\TEMPLATE\LAYOUTS directory and being used.
Is there something I am doing wrong or do I have to do this a completely different way? Maybe it's not a supported customisation?

There's two ways you can deploy your aspx (layout) files. One is deploy in _Layouts folder (which basically copy the file in (c:\program files\common files\microsoft shared\web server extensions\15\template\layouts). To copy file in that place, you don't
need module, just use SharePoint mapped folder.
Another way is to upload the layout folder in SharePoint library. But _catalogs is not the right place to upload your file (_catalogs doesn't have any subfolder named 'layouts'). You can upload your file in 'Pages' library or 'site pages' library in the
current web.
I'm not quite sure though (sorry I didn't get what the problem is but just guessed you are trying to get your aspx page in SharePoint designer, not sure why) why you need to upload the file in pages/site pages library instead of '_layouts' folder.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

BEx: How to change a Query Variable that is not visible in Filters List?

Hello Experts,
Good day, I'm currently editing an old query, I am changing the Query Variables with new ones, but I found one variable that I cannot replace.
Please see the screenshot below, in the Query Properties Window [Variable Sequence Tab (right side of picture)] the Variable that I am trying to replace (Unit) is visible. But when I look for the variable in the "Filter Tab" (left side of picture) under Characteristic Restrictions, it doesn't exist in the list.
How can I find this Variable and replace it with a new one?
Other reports are still using this variable so it will impact the other reports if I simply edit the variable. So I need to replace it with a new variable instead.
Thank you for your time.

Hi,
SInce you are searching for a variable for Unit, look into below screenshot and navigate to the variables.
First click on drop down and select 'Entry for variable' then you will get lisl (after you click on drop down in 'Target Unit' drop down option.
Normally these type of variable called 'Formula Variable' try editing any of the formula and locate the option as shown below,
Hope it helps! don't forget to update the final solution and mark the correct/helpful answers.
Remember it will help others to find the solution and motivate the members to answer your question.
Thanks,
Umashankar

Find Application Support Folders That are Not Visible in Time Machine

I would like to restore an application support file and a preferences file that are no longer visible in the Finder or in Time Machine since I upgraded to 10.8. I was able to do this in the past and am a little frustrated I cannot do it now. I know how to find the folders on my computer using the Finder Go to Folder method, but cannot use this method to find the files in my Time Machine backup. Please help. Thanks!

See http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/ and permanently unhide the user's Library. That should allow TM to update itself, making them visible, but maybe only in the latest updates. I don't use TM, so all I can point you for that is Pondini's TM FAQs.

Why I can not scroll menu drop down via mouse wheel to pick an option that is not visible?

I am using FF 22.0 on Windows 8. When I start scrolling on drop down menu which show the vertical scroll bar via mouse wheel event on my touch pad when the cursor is on the menu area, Firefox just close the menu. I don't install any add on related to mouse/touch event.
Toggling Use autoscrolling, Use smooth scrolling, or Use hardware acceleration has no effect.
This error behavior is not happening in IE 10. I just want some clarification whether this is a bug or I just failed to find some configurations that fix it.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How to close a program that is not visible

I have downloaded an app/program that I cannot delete as it keeps telling me the program is still open, but I am unable to open it and find it. The program is Tone Sync Zedge. Any help is greatly appreciated.

Hello Niel
Thanks for your advice. I tried both ways you suggested and neither worked. It keeps telling me the program is open and when I click on the program to "open" it., nothing happens. I really appreciate your advise as MAC is new to me and I know know how to delete a program that is normal, just nto working with the unfortunate download I put onto the computer. Any advise is greatly appreciated!

Items visible in PDF Preview not visible in Design View

Hello-
I used the auto create function to turn an existing PDF info a fill-in able PDF. Auto create "auto detects" form fields, including in some areas of the form that are not fields at all (blank areas, etc.). I go into Design View and remove any extra fields. However, I've discovered there are some fill-inable fields visible in PDF Preview and in the actual PDF itself (once saved) that are not visible at all in Design View- thus I can't click on them and delete them- they just aren't visible in that view. I've read the forums and it seems the opposite problem is more common, in which something shows in Design View but does not show in PDF Preview or in the final PDF.
Any guidance on what's going on? Next steps? I'm not a coder, so the simpler the better. Thanks to anyone with suggestions.

All the fields on your form are listed in the Hierarchy which is generally on the left-hand side of your screen. In there you should be able to go through each field and delete the ones you don't need.

Yosemite: Thumbnails not visible in Finder

I ran into a strange problem immediately after updating to Yosemite.
I have a 2014 mbp dual-video, 16 gb ram.
In any folder on my drive icons are not visible. They are there, I can drag and copy-paste folders and files, but the finder only shows a blank white window. Everything looks normal in List, Columns or Cover Flow modes.
I did a safe mode boot and restarted normally and everything went back to normal, including visible icons. But now I have the problem with an external ExFat drive. Anyone know how to solve this or what's going on?

Here's my problem, that continues with newly created folders. You can see that this folder has 5 items in it, with one selected. But they are not visible when Finder is set to icon mode.
Also, when I drag a corner of the Finder window to make it bigger, i get some "dragging" visual artifacts that are not visible in the screenshots but appear on my screen.

How to know if a scrollbar is been drawn if the JScrollPane is not visible.

I have a JTabbedPane with one JPanel in each tab. Each of these panels contains one JLabel with a JTextBox on the top and under it the rest is filled with a JScrollPane containing a JTable. I am using a GridBagLayout.
Now, the requirement is that the JTextBox must have the same length as the content of the JScrollPane; it means that if the JScrollPane has a vertical scroll, the JText has to be shorter on the right side by whatever the scroll width is, but if there's no vertical scroll then the JTextBox must be extended to the top of the right side.
Now, this that looks so simple is becoming a nightmare...
The main problem here is that this check to look if the JScrollPane has a scroll or not is done in tabs that are not visible, so i cannot use just a simple isVerticalScrollVisible() because the answer is always NO. I have been trying to catch all the events i could think may help but no luck and sometimes a refresh in one of the tabs produces the JTextField in another tab gets a wrong width.
One posible approach is the length of the total rows of the JTable, multiply it by the row height and compare it with... with what because the scroll is not visible and the heigh is 0.
Any ideas? Any one knows how can i know if the the silly scrollbar is visible or not in a non visible tab?
Thanks in advance.

Note: This thread was originally posted in the [Java Programming|http://forums.sun.com/forum.jspa?forumID=31] forum, but moved to this forum for closer topic alignment.

Certain Http Server Errors not visible in logs for Azure Websites

I noticed that a lot of times (but not every time) Http Server Errors on my Azure Website (an ASP.NET MVC app) don't show up in any logs, although they are recognized by Azure. E.g. I get alerts that Http Server Error count > 5 in the last 15 minutes,
I see the error count on the Portal under Monitoring/Requests and errors however these errors are not visible in my application's own logs or in the eventlog.xml. Thus I also can't troubleshoot them.
Now I'm not totally sure (and can't find any hints about) what exactly "Http Server Errors" mean in Azure terminology but since 4xx errors are handled separately by alerts I'd guess these are 5xx errors. If indeed then I don't understand why there
are apparently errors happening that are not visible at least in the event log?

Hi Zoltán Lehóczky,
For your issue ,I suggest that you could try to enable site diagnostics and application diagnostics in Azure Management Portal.
In site diagnostics ,it will logs Detailed Error Logging which logs detailed information for HTTP status codes that indicate a failure (status 400 or greater).
Then you could access the folder "/LogFiles/DetailedErrors" via Ftp to check Detailed Error Logs which provide any HTTP errors have occurred.
For more information ,I suggest that you could refer to the link below:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-enable-diagnostic-log/
Best Regards,
Kevin Shen.

Submitted build via Xcode is not visible in iTunes for review.

I have submitted a new build with number 199 via Xcode to iTunes for review but that is not visible even I got an email from Apple team to manage the builds. I have already submitted two builds 197 & 198 earlier which were rejected by Apple.

You have used Xcode 6.1 and it is a valid version, so you should not have any problem. Anyway, if there is any problem, Apple will contact with you to fix it before your app is published.

CD that is not visible

Similar Messages

Maybe you are looking for