CDC - clock icon does not turn to green from yellow after starting journal

Hi,
I am going through the following steps for my datastore for the CDC concept:
1. created a datastore.
2. Selectively reversed a table into it.
3. difined a simple journalizing mode and JKM oracle simple.
4. Right clicked on the data store , in that change data capture -> subscribe - > SUNOPSIS.
5. Right clicked on the data store , in that change data capture -> Add to CDC.
6. Right clicked on the data store , in that change data capture -> Start Journal.
In the Operator , i donot get any warnings or errors after i start the journal.
I have refreshed my Designer also.
But the clock icon is not turning into green from yellow.
I tried this for other datastores and tables too. Still the clock icon doesnot turn green.
Due to this iam not able to get any journal data.
Please help me with this issue.
Thanks
Divya aggarwal

Dear Sutirtha & Brice,
CDC is working fine for my source table now. Thanks for your help.
But now I am having issue with the Integration flow table.
I have created and interface with the journalized table as my source which is defined in one schema and target table which is defined on other schema.
I have kept staging area different from target.
The KMs which I am using are :
Source table - LKM SQL to Oracle: Source to Staging
Staging table - LKM SQL to Oracle: Staging to Target
Target table - IKM Oracle incremental Update - Common
I am using the default option values for these. Especially the detection strategy in the IKM is "<Default>:Not_Exists.
Now the issue is that my updated record of sorce table is getting inserted into the journal table and also into the work table at target schema side.
But that record is not getting inserted into the flow table , as a result of this that updated record at source is not getting updated in my target table from the flow table.
The package which I am executing is getting executed without any errors. Please guide me for the flow table issues.
Thanks & Regards,
Divya Aggarwal
Edited by: 784414 on Nov 25, 2010 11:32 PM

Similar Messages

Server in sap management cosnole does not turn into green

I installed this trial version from http://www.sdn.sap.com. with the download, there is a tutorial explaining all steps for installation. In SAP Management Console when I click on NSP "Start" it should change to green but in my case it stays yellow.
I do not have an access key to the server. When I try to log on to this server it asks me for user and a password so I tried to use nspadm with it's password but it did not accept.
as far as i know that in order to let the server turns to green all I need to do is to right click on it and choose starts but even after doing this it does not turns into green.
I want to create another user in order to user it instead of SAP*
The role that I am giving to this user is u201Csystem administratoru201D but after I save it I get this message on screen: u201CNo update server found for Eu201D
despite of this previous message it creates it. I get this if I create a new user with the previous name I wanted to create previously.
In general I need a way to let me create my own users so I can start developing in ABAP.
I can access every thing in this workbench but if I want to do some changes on classes and packages I create it tells me that I can not using SAP* and if I want to create other users sing SU01 and then logon again using using these new users I get a problem in accessing the system using them.
I need to know what is reason for not turning the server in sap management console into green and i why i can not create users.
Thanks
Amal

Dear Vincent;
this is what i got from "Developer Trace" for "disp+work.EXE"
trc file: "dev_disp", trc level: 1, release: "720"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 70
intno 20020600
make multithreaded, Unicode, optimized
profile
amal-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_amal-PC
pid 976
Mon Oct 10 17:01:10 2011
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 976) [dpxxdisp.c 1268]
shared lib "dw_xml.dll" version 70 successfully loaded
shared lib "dw_xtc.dll" version 70 successfully loaded
shared lib "dw_stl.dll" version 70 successfully loaded
shared lib "dw_gui.dll" version 70 successfully loaded
shared lib "dw_mdm.dll" version 70 successfully loaded
shared lib "dw_rndrt.dll" version 70 successfully loaded
shared lib "dw_abp.dll" version 70 successfully loaded
shared lib "dw_sym.dll" version 70 successfully loaded
shared lib "dw_aci.dll" version 70 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Oct 10 17:01:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >amal-PC_NSP_00 <
DpShMCreate: sizeof(wp_adm) 20000 (2000)
DpShMCreate: sizeof(tm_adm) 4323912 (21512)
DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064
DpShMCreate: sizeof(comm_adm) 556064 (1104)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (1792)
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3920
DpShMCreate: SHM_DP_ADM_KEY (addr: 09620040, size: 5055296)
DpShMCreate: allocated sys_adm at 09620048
DpShMCreate: allocated wp_adm_list at 09622F28
DpShMCreate: allocated wp_adm at 09623020
DpShMCreate: allocated tm_adm_list at 09627E48
DpShMCreate: allocated tm_adm at 09627E70
DpShMCreate: allocated wp_ca_adm at 09A478C0
DpShMCreate: allocated appc_ca_adm at 09A4F5C8
DpShMCreate: allocated comm_adm at 09A572D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 09ADEEF8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 09ADEF50
DpShMCreate: allocated j2ee_adm at 09ADEF88
DpShMCreate: allocated ca_info at 09ADFEE0
DpShMCreate: allocated wall_adm at 09ADFEF8
DpCommAttachTable: attached comm table (header=09A572D0/ft=09A572D8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Mon Oct 10 17:01:16 2011
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=159 reserved=47 quota=10%
Mon Oct 10 17:01:17 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654]
Mon Oct 10 17:01:22 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1755]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpAppcBlksLow: max appc blocks in queue is 250 (50 %)
DpWpBlksLow: max wp blocks in queue is 400 (80 %)
Mon Oct 10 17:02:07 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
Mon Oct 10 17:02:27 2011
ERROR => MsIAttachEx: NiBufConnect to amal-PC/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]
this process "disp+work.EXE" is still yellow

Camera icon does not appear in my message option after download

Dowloaded latest version to send pics to phones, etc. and the camera icon does not show up as it does in other people's phones that have downloaded. Tried to re-sync and no change. Do i need to re-download? Each time i hook up with the mac it says latest version already installed. So don't know how to do that.

Did you turn the phone off and then back on?

IMac does not turn back on from sleep mode

Hi all,
I've having a problem sometimes that my iMac won't turn back on after I put it into a sleep mode. This does not happen everytime. After the machine does not turn back on, the only workaround is to unplug the power cable and connect it back. Then I'm able to turn on the iMac. After the machine boots up, and I will get the crash report said that the machine does not turn it off properly.
I tried to reset the SMC before and it did not resolve the problem.
Any idea?

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

AppleWorks Icon does not stay in the same position after saving

After I installed AppleWorks 6.2.8, each time I save the file (word prosessor or data base) the icon on the desktop always moves to the right side of the screen below the hard drive icons. If I drag it to different position, then save the file it will move to the right side of the screen. If the saved file is in a folder, it always goes back to it's origional position. In fact, the same thing happens to other applactions (PhotoShop, TurboCad, etc.). This only happens in OS 9.2.2. It does not happen in OSX 10.4.6. The same situation also happens on my iBook and PowerMac G4 MDD after installing AppleWorks 6.2.8.
My System: PowerMac 7300, Sonnet 1GHz G4, 1GB memory, OS 9.2.2, OSX 10.4.6
I checked the AppleWorks preferences and Control Panels and could not find any settings.
This does not happen with AppleWorks 5.
Anyone know what has happened? Are there settings I am missing?
Much Thanks,
Gene
Mac OS 9.2.x

Hello
If I remember well, AppleWorks 5 was saving one document by rewriting the old one. Doing that, all the file's attributes where kept.
AppleWorks 6 writes an entirely new file, so the icon is not preserved. Of course, some of us think that it would have been a good idea to keep the parameters of the old file and "paste" them to the new one.
I wrote a script doing that but it is not perfecly stable.
For my own use, I build an alias of every file to which I want to give an icon. The file itself doesn't keep the icon (and its position in the window) but the alias keep it.
If you are really bothered by the standard icon, create a subfolder in which you store the documents and use these two scripts.
--[SCRIPT hideIt]
set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
try
tell application "Finder" to set name of folder (leDossier & "masqué") to ".masqué"
end try
--[/SCRIPT]
--[SCRIPT unHideIt]
set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
try
tell application "Finder" to set name of folder (leDossier & ".masqué") to "masqué"
end try
--[/SCRIPT]
You will see the aliases with their icon and the true file will be safe in the hidden subFolder.
Yvan KOENIG (from FRANCE dimanche 10 septembre 2006 20:44:29)

Moving mail to the trash icon does not delete the mail.

I am using an iPad with OS Ver 7.0.2. Moving mail to the "Trash" icon does not delete the mail from the Inbox. This is not a problem on my iPhone. Settings are the same on both devices

First thing to try is a reset: hold the on/off button and the hold button at the same time until the iPad completely shuts down, then turn back on.
May not work, but often resolves simple app issues.

Music icon does not function on ipad

Since the last update the music icon does not turn on music. Also unable to download music from icloud \Thanks

You are referring to the red iTunes app in the Dock?
Tap Settings > iTunes & App Store. Make sure you're using the correct Apple iD.
Make sure Music is switched ON.

HT4972 My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

IS MY IPOD DEAD?!?!?!?!?
I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
to charge it as well as connecting it to itunes but no success. Could you please help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4623 Hi, last night on my Iphone 5 pop up new iOS to download, so I did and now my phone does not turn on at all even it's been all night chatging. when i turn it on i get apple icon for second and than it kick me back and shoe me iTunes icon. what shou

Hi last night I download new iOS and since that my phone does not turn on at all!! Even it's been all night in charger. Only iTunes icon with charger appers to my screen and that's it. Could someone help please??

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps.

Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it?

Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it

it's not under "internet and wireless" in system preferences?

W500 z circle button is green but does not turn on

My w500 was not coming out of sleep mode. I am trying power button. The circle z ligh an and battery symbol light is on but it does not turn on. Any help?

press Fn button to get it to wake up from sleep.
Do you have issue with powering up?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I have turned on home sharing but the house icon does not appear. Have read a blog that says it is not set up correctly am i missing something here?

I had home tuning running fine on my mac. Since introducing apple tv the home sharing house icon is missing and will not allow me to drag and drop from home sharing. I have read other blogs that say if the house icon does not appear then home sharing is not set up correctly. Any suggestions as it seems to be running fine except for letting me move files.

see if anything in this support article helps.

CDC - clock icon does not turn to green from yellow after starting journal

Similar Messages

Maybe you are looking for