CDC Error (JOURNALIZED DATA is not loading into tartet database)

HI,
I have enabled source database for CDC and got green mark on source database model tables.
while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
when I run the package/ interface JOURNALIZED DATA is not loading into target database.
i have implemented cdc for 7 source table.
and using JKM MSSQL Simple
and enable JOURNALIZED DATA in interface level.
and
source database is : MSSQL Server
Target Database : Oralce 11g.
please advice me.
thanks in advance.
Zakeer Hussain

Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

Similar Messages

Data is not loading into the target table in BODS

BODS job is executing successfully but data is not loading.
can anyone please let me know what is the problem
Regards,
Deva

Hi Deva
The Information provided is very limited, what are your Source and Target Databases?
What is the structure of the job design?
If the job completed without error, review the job logs to confirm that rows were indeed processed.
Regards
Charles

Urgent ......data is not loaded into the ODS

Hi,
we try to load the data in to ODS via the Infopackage. Job is finished with Green status. In the requests tab I saw that transferred are 1486 & the addded records are 1486.
But the ODS sah empty structure, no records are loaded into the ODS?
Any suggestions please?
sailekha

Hi
It is availabe for reporting the status is green
all the related objects are active
I try to actvate ODS Data, But it asks me the job name
I am unable to actvate the Data of ODS.
Still I have the same problem how to proceed further........please let me´know
Yesterday It is working fine but today I got this problem in Production.
any suggestions please......
thanks in advance

Data is not Loading into Active data table on DSO in BI 7.0

Hi,
Iam loading data from a flat file to ODS in BI 7.0, the data is loading up to PSA and New data table , But the DSO is not activating, after all possible steps like, automatically setting/ manualy doing / through Process Chain....still unable to do it....Cud u pls tell the reason and solution.

Hi Sri,
Did you get any solution for this issue. Your input is highly appreciated.
We are also running on the same boat, I am using the End-Routine to fill up the 2 fields (one is Key figure and Characteristics) from one DSO to the other. In my case along with all other fields this key figure is also populating before and after the Activation of DSO. But the new Characteristics is populating in the update table (/BIC/A***40) before activating the DSO, once I activated the DSO the new characteristics is not filling up in the (/BIC/A***00), rest are coming without issues.
I built the same logic for other current data DSO (write optimized) from other DSO to fill the same fields with the similar logic in the end routine, it is up and running without any issues.
Thanks,
Dileep

Data is not loaded into PSA

When I am scheduling infopackage, request is successful saying 200 records received in PSA but no data is there in PSA.

hi ambika,,,
this could happen because of Check if PSA table is active or not, if not replicate from source system.
can u provide details msg about scheduling thr info pkg. there could loading issue in extractor settings.or selection parameter provided is invalid.
Regards
satish

Data is not loaded into info cube

Hi All,
I have a custom defined info cube and full load is running every month and It's hardly taking 1 hour to finish the same.
But this month data came to PSA successfully from there to data target process stopped at update rules, non of the records are getting added to info cube. We haven't done any changes on update rules also.
Can anybody let me know what might be the reason behind it. Thanks.
Regards,
Ashok
Message was edited by: Ashok kaipu

Hi Ashok,
You can do the following:
1. In the Monitor Status tab, turn the request Red.
2. In the Details tab right click this data package and choose Manual Update.
3. After the processing is done, the datapackage will be green but the overall request will still be red.
4. In the Monitor Status tab, turn the request back to original status (this will make it green)
Hope this helps...

Data is not loaded into DSO - (Very Urgent)

Hi Guys,
I have loaded my flat file data in BI 7.0 uptp PSA. I have created DTP also and executed the same. But no data is shown in DSO.
Please let me knwo what the problem exists.
thanX in advance
peter b

Hi Peter,
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Assign Points if this is useful.
Regards,
Anil

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

PSA data change not loaded to the target.

Hi all,
We have the data in PSA (it is the master data)- while transferring the data from PSA to the target, system throws error - on analysing the error we found that the characters in the data is wrong, the same was corrected in the PSA - on reloading after correction to the target, system is ignoring the corrected records and loading only the other records.
What could be the reason for this behaviour.
Can experts help.
Regards,
M.M

Dear Mr.Goud/Murali,
Thank you for your immediate reply and instructions.
Mr. Goud,
The PSA QM status is only green but even then the corrected record is not loaded to the target.
Mr. Murali,
As per your information we do not have an Error DTP - i have only one DTP and we are in BI7.00 - I have deleted the request from the target and corrected the erroneous record and am trying to load only that record by using the filter option in the DTP - still the data is not loaded.
Can you suggest method of adopting - i am not able to understand why that corrected record is not loaded. Is it that manually corrected record in the PSA will not be loaded into the target?
Kindly clarify.
Regards,
M.M

Why do I get "error code 3: Could not load front panel" when I run my executable.

I have a LV 8.5 VI that controls only an agilent spectum analyzer. The agilent VIs call DLLs rather than SCPI commands. I created an application and an installer to load on a non LV machine and ran setup which was successful. When I run the EXE I get "error code 3: Could not load front panel" for each of my agilent spectrum analyzer VIs. I have to click "OK" about ten times, once for each VI. (My executable runs fine on all machines that have labview 8.5) The front panel does load with a broken arrow. The errors listed when the arrow is clicked for all of the Agilent VIs state: Missing subVI AGE444xInitialize.VI (or close.VI or read.VI etc.)
There is an AGE444x32.DLL in the data folder with the EXE file so I included as support both the DLL and all of the agilent drivers in the application build. Still no luck. I have built the application and installer about 6 times in various forms. I NEED AIR SUPPORT.
Unfortunately I do not have access to the internet at my jobsite so bear with me.
Rob

Hi V-rob,
I'm glad to hear the executable is working now that NI-VISA is installed. Thanks for posting the solution!
Jennifer R.
National Instruments
Applications Engineer

Data is not populate into base table

Hi all,
I am using Oracle EBS R12 and OS is WIN XP. I am working in PO module.The data is not populating into the base table after running the concurrent program.Instead,the interface error table is populated with the error.
The error is :-- Bill to location id not valid
Name of concurrent program:import Standard purchase order

Pl identify which version of R12. Pl see if these MOS Docs can help
Vision Demo - How To Import Standard Purchase Orders Using the Purchase Document Open Interface (Doc ID 1054004.1)
How To Diagnose Problems With Importing Standard Purchase Orders (Doc ID 781351.1)
HTH
Srini

Urgent::::Data is not loaded for a perticular info object in ods

Hi All,
We have loaded data into an ODS( 0PRC_DS01) in development server. It was successfully loaded into it all info objects.Reports were working well.
When we transported it to production, data loading was taking longggg time (15000 for 9 hours).So, we have done two things to improve the loading speed.
1) we have created an index based on the fields in the where clause RCLNT,RLDNR,RYEAR, DOCNR, POPER in JVSO1 table.
(JVSO1 is an R/3 table from where key data coming to datasource 0EN_JVA_2.)
2)We have updated the optmizer statistics.
Now the problem is, data is not loaded to one perticular info object JOINT VENTURE PARTNER in dso. Which was loaded successfully in development.
Please help us........We will assign points for helpful answers

Hi Chek in the transfer and update rules whether u mapped the fields with target and also check whether u have routine. and check whether the data is coming for that object from the source.
Khaja

AWM - After successull cube maintainance data does not load

Hi All,
After creating the cube when i maintain the cube the data does not load. I went back and looked at the mapping at the cube level and the dimension level and everything looks fine. Any clues why the data does not get loaded. Also, i did not recieve any error while maintaing the cube.
thanks

Hi,
I was able to resolve this issue. I did not map the cube properly especially the time dimension. Due to this the data did not get loaded in the cube. ReMapping fixed the problem.
Hope this helps other newbies..

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Page data does not load with goButton? (new window of identical page)

Hi guys. I ran into a problem. Essentially, I need to print a .jsff page but before I do, I have to alter its format a little bit. The solution I decided to use was to create a new .jspx page containing almost the exact same content. I even copied the data bindings and everything. Finally, I created a goButton on my original page like so:
<af:goButton text="Print as BOSSMON" destination="SubmitPrint.jspx?org.apache.myfaces.trinidad.agent.email=true"
                    targetFrame="_blank">
</af:goButton>This opens my page nicely in the format I want. But...there is no data on the page! It just opens a frame of the page. Can someone help me resolve this?
Otherwise, is there any other technique I could use to accomplish my goal?

Hi guys. Thanks to everyone for their suggestions. I finally got a working solution, something totally different from the suggestions.
My goal was to print a .jsff page nicely. But before I could do that, I needed to modify some data on the page. I also wanted to do this in as few clicks as possible. I tried the goButton technique but the binding data would not load. I couldnt figure out why.
Nonetheless, I finally managed to make my own version (albeit, not that neat!). I accomplished this by essentially making a template which automatically opens in showprintablebehavior format. I tried to follow a bunch of online tutorials/blogs but nothing worked for me. Here are the steps I used:
1) Creating a new .jspx page.
2) Copy the entire source of the .jsff page (the one which needs to be printed) into our new template .jspx page. (do have to modify the beginning parts by adding <af:document> <af:form> etc)
3) Create a pageDef for the template page and copy the entire pageDef as well (do have to change the name of the pagedef)
4) Modify your print template to your liking.
5) Add a taskflow rule that links the original .jsff page to the new template page
6) Add a commandButton on the original .jsff page which opens this printing page in a new window (remember to use "dialog:....."). Here is mine:
<af:commandButton text="Open Printer Friendly Version" id="printer_popup" action="dialog:edit_print" useWindow="true"
                              windowEmbedStyle="window" inlineStyle="display:block;"
                              windowHeight="100" windowWidth="100">
</af:commandButton>7) Now, in the printing template page, add a command button which simply has the showprintablebehaviour tag within it as well as a client listener to invoke some javascript. Here is what I used:
<af:commandButton text="Printer Page" id="sha_print">
    <af:clientListener method="do_loading" type="focus"/>
    <af:showPrintablePageBehavior/>
</af:commandButton>8) In the beginning of this page, you will have an <af:document> tag. Modify it so it sets focus to our print button above when the page loads. Like so:
<af:document id="d2" initialFocusId="sha_print">9) Now add a resource tag to your page which has the "do_loading" javascript method.
<f:facet name="metaContainer">
    <af:resource type="javascript">
          function do_loading(event) {
              var target = document.getElementById('sha_print');
              target.click();
              top.close();
              //alert("got focus sir!");
    </af:resource>
</f:facet>Thats it! What this does is when you click on the command button to open the printer template, our template page opens but as it opens, it automatically sets focus to the printer button using the document tag. The printer button has a listener which activates when it receives focus (in our case, as soon as the page loads). This listener invokes the javascript method, which progamatically clicks the printer button and closes this window. What your left with is a printer friendly page of your modified page!
All the data is present there too!
If anyone has any questions/comments, please do ask.

CDC Error (JOURNALIZED DATA is not loading into tartet database)

Similar Messages

Maybe you are looking for