CDC in not started in the current context

Dear All,
I have performed all steps successfully for change data capture based on Mark Ritman article (http://www.oracle.com/technology/pub/articles/rittman-odi.html) with no errors. For some days everything worked fine but suddenly CDC stopped. The only message I see and I believe that something is going wrong, is when I am pressing ‘Journalizing’ on a certain table. The message is the following:
The table is included in CDC in consistent mode
CDC in not started in the current context.
The result is that no changes (journalized data) are produced!
Please note, that I am using the correct Context in main ODI interface (list box on the top of the screen). Could you please someone help me? It is very important to solve in ASAp since the system should be operate in production in a few days.
Regards,
George A. Verveniotis

Hello,
Could u plz tell me how u solved this problem? Im facing exactly the same.
Regards

Similar Messages

The name '' does not exist in the current context

I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | Igor

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Azure - The name 'model' does not exist in the current context

I am getting the error below but only on Azure, everything builds and runs fine on multiple machines running locally. But when I deploy to Azure I get the error below trying to login. Not even sure where to start researching this one
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0103: The name 'model' does not exist in the current context
Source Error:
Line 1: @model Web.Models.LoginViewModel

hi,
From the error message, it seems like a MVC issue.
I suggest you could re-configure your web configuration follow those solutions The name 'model' does not exist in current context in MVC3
and
Razor View throwing “The name 'model' does not exist in the current context” .
And then you could try to deploy project to azure again. I think this error may be disappeared. Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The name 'InitializeControl' does not exist in the current context

Hi ,
i try to run my visual web part in vs2012,without adding any code to template i deploy web part into sharepoint2013.
but i got below error
The name 'InitializeControl' does not exist in the current context.how can i solve this error
Thanks,
Madhu.

Here's my ASCX file that breaks the code generation:
<%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
<%@ Assembly Name="Microsoft.Web.CommandUI, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
<%@ Import Namespace="Microsoft.SharePoint" %>
<%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="VisualWebPart1.ascx.cs" Inherits="Ensol.ViewAttachmentsWP2.VisualWebPart1.VisualWebPart1" %>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Repeater ID="Repeater1" runat="server">
<HeaderTemplate>
<table>
</HeaderTemplate>
<ItemTemplate>
<tr>
<td><a href="<%# Eval("FileUrl") %>"><%# Eval("FileName") %></a></td>
<td><asp:LinkButton ID="LinkButton1" runat="server" CommandArgument="<%# Eval("FileName") %>" OnClick="LinkButton1_Click">Delete</asp:LinkButton></td>
</tr>
</ItemTemplate>
<FooterTemplate>
</table>
</FooterTemplate>
</asp:Repeater>
</ContentTemplate>
</asp:UpdatePanel>
No matter what I've tried to do with my webpart, the VS still generates an ASCX.G.CS file with no content at all. What I'm doing wrong?

Error in script task "The name 'file' does not exist in the current context"

I am new to the c# scripting and SSIS come from PHP and Foxpro.
I am using SSIS with a script task and I am getting am errror "The name 'file' does not exist in the current context" in the following code in the picture below: (See
Why does the object named "file" go away after the first refrence to it?? How do I make it avaliable for the whole script??
     public void Main()
        String cFileInfo = null;
        DateTime dFTPFileDateTime;
   bool fireAgain = true;
            List<IRemoteFileInfo> fileList = (List<IRemoteFileInfo>)Dts.Variables["SFTPResult"].Value;
            foreach (IRemoteFileInfo file in fileList)
                cFileInfo = file.Name + "|" +file.ModifiedTime +"|"+ file.Size;
            Dts.Events.FireInformation(1, "Name ", cFileInfo, "", 0, ref fireAgain);
            dFTPFileDateTime =
file.ModifiedTime;
<< This is where the error is occuring.
            Dts.TaskResult = (int)ScriptResults.Success;

I think you forgot { and } after the loop... Or is that deliberately?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

CreateValuesFromQuerystring doest not exist in the current context

Hi All,
I am trying to integrate jqGrid in Sharepoint so i am following the below link
http://www.mindsharp.com/blog/page/8/
But getting an error like The name CreateValuesFromQuerystring does not exist in the current context..
please do the needful..

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Wp8 build error="The name 'InitializeComponent' does not exist in the current context" in app.xaml.cs."

I added a new xaml page to my project and copy and pasted some regular snippets to it that I've done before to many other pages. After all the changes looked good to me, I did a rebuild and got this error in the app.xaml.cs which I hadn't changed.
I also get the same error in the new page I created. It seems that the xaml design and code are not linked because there are other build errors in the new page's code file that reference other controls in it's design. Those references also look
ok to me but they get the similar "The name '.....' does not exist." error.
walter fink

Hi,
You don’t have “x:Class="DIYMedAPP.App"”
in your App.xaml file, which caused such error in App.xaml.cs. Please add it.
<Application
x:Class="DIYMedAPP.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone">

<Application.ApplicationLifetimeObjects>

<shell:PhoneApplicationService
Launching="Application_Launching"
Closing="Application_Closing"
Activated="Application_Activated"
Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error:The name 'GetValue' does not exist in the current context

hi all, i get that error when i tried to build my project , any help plz
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Workflow.ComponentModel;
using Microsoft.Crm.Workflow;
using Microsoft.Crm.Sdk;
using System.Workflow.Runtime;
namespace MicrosoftDynamicsCrm4
[CrmWorkflowActivity("Calculate Age", "Programming Microsoft CRM 4")]
class CalculateAgeActivity
public static DependencyProperty EarlierDateProperty = DependencyProperty.Register(
"EarlierDate", typeof(CrmDateTime), typeof(CalculateAgeActivity));
[CrmInput("Earlier Date")]
public CrmDateTime EarlierDate
get { return (CrmDateTime)GetValue(EarlierDateProperty); }
set { SetValue(EarlierDateProperty, value); }

well, i forgot to inherit from DependencyObject and now code seems good , but when i tried to add this function i get this error
note that i copy that snippet code from programming microsoft crm 4 ebook.
the new error is :Error 'MicrosoftDynamicsCrm4.CalculateAgeActivity.Execute(System.Workflow.ComponentModel.ActivityExecutionContext)': no suitable method found to override
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Workflow.ComponentModel;
using Microsoft.Crm.Workflow;
using Microsoft.Crm.Sdk;
using System.Workflow.Runtime;
namespace MicrosoftDynamicsCrm4
[CrmWorkflowActivity("Calculate Age", "Programming Microsoft CRM 4")]
public class CalculateAgeActivity : DependencyObject
public static DependencyProperty EarlierDateProperty = DependencyProperty.Register(
"EarlierDate", typeof(CrmDateTime), typeof(CalculateAgeActivity));
[CrmInput("Earlier Date")]
public CrmDateTime EarlierDate
get { return (CrmDateTime)GetValue(EarlierDateProperty); }
set { SetValue(EarlierDateProperty, value); }
public static DependencyProperty LaterDateProperty = DependencyProperty.Register(
"LaterDate", typeof(CrmDateTime), typeof(CalculateAgeActivity));
[CrmInput("Later Date")]
public CrmDateTime LaterDate
get { return (CrmDateTime)GetValue(LaterDateProperty); }
set { SetValue(LaterDateProperty, value); }
public static DependencyProperty AgeProperty = DependencyProperty.Register(
"Age", typeof(string), typeof(CalculateAgeActivity));
[CrmOutput("Age")]
public string Age
get { return (string)GetValue(AgeProperty); }
set { SetValue(AgeProperty, value); }
protected override ActivityExecutionStatus Execute(
ActivityExecutionContext executionContext)
CrmDateTime earlierDate = this.EarlierDate;
if (earlierDate != null)
CrmDateTime laterDate = this.LaterDate ?? CrmDateTime.Now;
this.Age = GenerateHumanReadableAge(
laterDate.UniversalTime - earlierDate.UniversalTime);
return ActivityExecutionStatus.Closed;
private string GenerateHumanReadableAge(TimeSpan age)
string result;
int years = age.Days / 365;
int months = age.Days / 30;
int weeks = age.Days / 7;
if (years > 1)
result = String.Format("{0} years", years);
else if (months > 1)
result = String.Format("{0} months", months);
else if (weeks > 1)
result = String.Format("{0} weeks", weeks);
else if (age.Days > 1)
result = String.Format("{0} days", age.Days);
else if (age.Hours > 1)
result = String.Format("{0} hours", age.Hours);
else if (age.Minutes > 1)
result = String.Format("{0} minutes", age.Minutes);
else
result = String.Format("{0} seconds", age.Seconds);
return result;
foreach(object HeartBeat in me.heart.Beats) messageBox.show("I miss u !!")

Windows Forms Application, the name does not exist in the current context

Probably duplicated here somewhere but I haven't found it yet. I've solved all other errors, have using statements and references lined up yet get this error for my instances in GUI_Load method in PresentationGUI.cs. My solution contains class libraries/projects
for Housing, SingleFamily, MultiUnit and HousingAPP w/contains PresentationGUI and Program.cs.
Code looks like this:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using HousingNameSpace;
using SingleFamilyNameSpace;
using MultiUnitNameSpace;
namespace HousingAPPNameSpace
    public partial class PresentationGUI : Form
        //private SingleFamily singlefamily;          apparently this is not the solution
        //private MultiUnit multiunit;
        public PresentationGUI()
            InitializeComponent();
        private void PresentationGUI_Load(object sender, System.EventArgs e)
            singleFamily = new SingleFamily(32779, 1100, "one car", "plan B");
            multiUnit = new MultiUnit(32789, 1250, 16, 0);
Haven't placed more than 2 simple controls on the Form in 'Design'. The 2 errors are on singleFamily and multiUnit. If I can figure out why and how to correct, I can add controls and finally, after eons, get to Error Checking.
Thanks in advance for any and all interest!
Mac

The two lines that you have commented out with "apparently this is not the solution" would, in fact, be the solution if you use the right casing so that the variables match the lines with the errors - capital F in singleFamily and capital U in
multiUnit.

Error: The name 'HttpUtility' does not exist in the current context

G'day,
My attempt to complete tutorial 'How to create a basic RSS reader for Windows Phone' (http://goo.gl/pLBHaL) has been unsuccessful, with the above-mentioned error generated on F5.
I have successfully installed, after some hiccups, OData Client Tools for Windows Phone Apps.
Any pointers would be appreciated.
Best,
Gaurav

And for Windows Phone 8.1 you should use WebUtility rather than HttpUtility:
// Remove encoded HTML characters.
fixedString = WebUtility.HtmlDecode(fixedString);

User start date can not be before the current date

I'm creating users using the Reconciliation engine. The start date attribute doesn't appear to be reconciling. I get many different types of parse errors. The closest I appear to get is when I set the Xellerate User resource object recon field to have Start date as a date field, i receive the error:
"User start date can not be before the current date.".
I'm using 9.0.1.1. And I AM trying to create a user that has a start date before todays date.

Resolution was to patch to 9.0.1.1578

Error - The requested query does not exist on the current server

Hi all,
We've started to get an error when exeucting queries on our BW system. The erorr is "The requested query does not exist on the current server". Even though I can go in an change the query on the server, I get this message when I try to execute it. I also get the same message when I try to run the query in RSRT.
Has anyone else run into this problem?
Thanks!
~Matt

The problem that we had was due to a pre-query not transported up. We transported up the missing pre-query and everything worked fine. If you go into change mode on the query and press the check button. It should tell you which query is missing.

Get the current context of the site where web-part is added in the same site collection

Hi,
I'm creating a visual web-part in SharePoint 2013 using server object model (can't user COM as the code will run on the same server) to get all the members of "Members" group of the site/web wherever this web-part
will be added (in the same site-collection), so it will take the context of the site wherever it is added.
For Eg: I have a site collection "http://<Server_name>/sites/Finance" OR "http://<Server_name>/sites/Finance/Microsoft" OR some other subsite. I have used SPContext.Current property to get the current context
, but no success :( .
I tried in SPSite: SPContext.Current.Site ; new SPSite(SPContext.Current.Web.URL) and many other combinations with SPSite.
in SPWeb : site.openweb()
But I'm always getting the URL as "http://<Server_name>/" and not the context where the web-part is added in the same site collection.
Vipul Jain

Hi Bjoern,
Thanks for the reply. I'm able to get the access of members group through API's. Just wanted to know about the context in SPSite & SPWeb. As you suggested , is there no need to use SPSite ?
using (SPWeb web = SPContext.Current.Web)
SPGroup membersGroup = web.Groups[web.Name + " Members"];
SPUserCollection lstMembers = web.Groups[web.Name + " Members"].Users;
foreach (SPUser member in lstMembers)
// add all the group users to the list
users.Add(member.Name);
It's not working
Vipul Jain

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

CDC in not started in the current context

Similar Messages

Maybe you are looking for