CDC SSIS 2012 ,CDC TASK,CDC Source,CDC Splitter

Hi,
I tried CDC in SSIS 2012 yesterday I was unable to run the hole process sucessfully
http://www.mattmasson.com/index.php/2011/12/cdc-in-ssis-for-sql-server-2012-2/?utm_source=rss&utm_medium=rss&utm_campaign=cdc-in-ssis-for-sql-server-2012-2--------------------------------------------------------------------------------
did any one tried this process
Sri.Tummala

sorry my sql server agent is turned off i have to turn it on
after turning it on i trie dto run the package it gave following errors in data flow
[CDC Source [2]] Error: "Value ILUPDATE/CE/0x00078CD5000023D20001/IR/0x00078CD5000023590002//TS/2012-05-24T14:12:15.0476569/ of CDC state User::CDC_State is not well structured. Structure must be - logicalName(required)/[CS/<cs-lsn>/](optional)[CE/<ce-lsn>/](optional)[IR<ir-start>/<ir-end>/](optional)/[TS/timestamp/](optional)[ER/<error-message>/](optional).".
[CDC Source [2]] Error: System.Exception: Value ILUPDATE/CE/0x00078CD5000023D20001/IR/0x00078CD5000023590002//TS/2012-05-24T14:12:15.0476569/ of CDC state User::CDC_State is not well structured. Structure must be - logicalName(required)/[CS/<cs-lsn>/](optional)[CE/<ce-lsn>/](optional)[IR<ir-start>/<ir-end>/](optional)/[TS/timestamp/](optional)[ER/<error-message>/](optional).
at Attunity.SqlServer.CDCSrc.CdcSourceComponent.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on CDC Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Sri.Tummala

Similar Messages

SSIS 2012 Script Task Debugging not working (VSTA Popup but no script displayed in IDE)

Hi,
I am trying to debug 2012 SSIS Package but for some reason its not working. Basically when I run package (64bit mode) it pop up Script IDE but never brings up Script (see below). Usually when debugging of script starts it should break execution at the code.
Anybody experienced this issue with SSIS 2012 ?
Thanks,
Nayan
Visit My Blog (Home of BI Articles)

Hi,
I am trying to debug 2012 SSIS Package but for some reason its not working. Basically when I run package (64bit mode) it pop up Script IDE but never brings up Script (see below). Usually when debugging of script starts it should break execution at the code.
Anyone has clue whats going on here?
Thanks,
Nayan
My Blog |
Convert DTS to SSIS |
Document SSIS |
SSIS Tasks |
Real-time SSIS Monitoring

SSIS 2012 Script Task to Get File Properties

Hello,
I researched on how to grab a file properties such as file size, file modified date, etc and I came across the following
link:
I followed exact steps and when I went to execute the package, I got the following error:
Below is the code:
// C# code
// Fill SSIS variables with file properties
using System;
using System.Data;
using System.IO; // Added to get file properties
using System.Security.Principal; // Added to get file owner
using System.Security.AccessControl; // Added to get file owner
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_cb8dd466d98149fcb2e3852ead6b6a09.csproj
[System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
public void Main()
// Lock SSIS variables
Dts.VariableDispenser.LockForRead("User::FilePath");
Dts.VariableDispenser.LockForWrite("User::FileAttributes");
Dts.VariableDispenser.LockForWrite("User::FileCreationDate");
Dts.VariableDispenser.LockForWrite("User::FileExists");
Dts.VariableDispenser.LockForWrite("User::FileInUse");
Dts.VariableDispenser.LockForWrite("User::FileIsReadOnly");
Dts.VariableDispenser.LockForWrite("User::FileLastAccessedDate");
Dts.VariableDispenser.LockForWrite("User::FileLastModifiedDate");
Dts.VariableDispenser.LockForWrite("User::FileOwner");
Dts.VariableDispenser.LockForWrite("User::FileSize");
// Create a variables 'container' to store variables
Variables vars = null;
// Add variables from the VariableDispenser to the variables 'container'
Dts.VariableDispenser.GetVariables(ref vars);
// Variable for file information
FileInfo fileInfo;
// Fill fileInfo variable with file information
fileInfo = new FileInfo(vars["User::FilePath"].Value.ToString());
// Check if file exists
vars["User::FileExists"].Value = fileInfo.Exists;
// Get the rest of the file properties if the file exists
if (fileInfo.Exists)
// Get file creation date
vars["User::FileCreationDate"].Value = fileInfo.CreationTime;
// Get last modified date
vars["User::FileLastModifiedDate"].Value = fileInfo.LastWriteTime;
// Get last accessed date
vars["User::FileLastAccessedDate"].Value = fileInfo.LastAccessTime;
// Get size of the file in bytes
vars["User::FileSize"].Value = fileInfo.Length;
// Get file attributes
vars["User::FileAttributes"].Value = fileInfo.Attributes.ToString();
vars["User::FileIsReadOnly"].Value = fileInfo.IsReadOnly;
// Check if the file isn't locked by an other process
try
// Try to open the file. If it succeeds, set variable to false and close stream
FileStream fs = new FileStream(vars["User::FilePath"].Value.ToString(), FileMode.Open);
vars["User::FileInUse"].Value = false;
fs.Close();
catch (Exception ex)
// If opening fails, it's probably locked by an other process
vars["User::FileInUse"].Value = true;
// Log actual error to SSIS to be sure
Dts.Events.FireWarning(0, "Get File Properties", ex.Message, string.Empty, 0);
// Get the Windows domain user name of the file owner
FileSecurity fileSecurity = fileInfo.GetAccessControl();
IdentityReference identityReference = fileSecurity.GetOwner(typeof(NTAccount));
vars["User::FileOwner"].Value = identityReference.Value;
// Release the locks
vars.Unlock();
Dts.TaskResult = (int)ScriptResults.Success;
Eventually I am looking to just grab the Modified Date from the Windows Explorer folder and insert into table. Any suggestions? Thank you in advance!
Sanjeev
Sanjeev Jha

Hi SSISJoost,
I am so glad you responded to this thread. You are absolutely right. I copied the entire code including the project name (guid) and that solved the error problem.
Now, what did you do to get the message box? I added the watch and I could see the values but how do I get these values in a table? If I remember correctly, in your blog, you mentioned something about using derived columns. I am familiar with Derived Columns
but how do I do that? I appreciate your response.
Thank you.
Sanjeev
Sanjeev Jha
I used a second script task to show all variable values. It has a
MessageBox in it and between all
variables I added a
newline to make it more readable...
But with an Execute SQL Task and parameters you can also put these values in a Table... or you can read the file in a Data Flow Task and add those variables (as metadata) to each record with a Derived Column
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Is it a bug - SSIS 2012 ReadOnlyVariables in Script Task doesn't work

It's very weird when I use the ReadOnlyVariables in SSIS 2012 Script Task, it doesn't work at all!!! And I never notice this change before, but everything in 2008 R2 is fine! Is it a bug in SSIS 2012 ?
All the variables I set them to "ReadOnlyVariables"
In scripts - I assigned some values from system variables.
String PackageName = Dts.Variables["System::PackageName"].Value.ToString();
DateTime CurrentDate = (DateTime)Dts.Variables["System::StartTime"].Value;
// User Defined Variables
Dts.Variables["User::PV_CURRENT_DATE"].Value = CurrentDate;
Dts.Variables["User::PV_YEAR"].Value = CurrentDate.Year;
Dts.Variables["User::PV_MONTH"].Value = CurrentDate.Month;
Dts.Variables["User::PV_DAY"].Value = CurrentDate.Day;
Dts.Variables["User::PV_PACKAGE_NAME"].Value = PackageName;
Execute the package, it works !
The only thing I can make it as SSIS 2008 R2 does is to change the ReadOnly for each variables.
Then you will get the error.
Why do we need this feature here but not to use the ReadOnlyVariables in script task ?
Please vote if it's helpful and mark it as an answer!

I can reproduce it as well. Feels like a bug...
Locking the variable for read in code has the same effect:
public void Main()
// Lock variable for read
Dts.VariableDispenser.LockForRead("User::myStringVariable");
// Create a variables 'container' to store variables
Variables vars = null;
// Add variable from the VariableDispenser to the variables 'container'
Dts.VariableDispenser.GetVariables(ref vars);
// Now try giving it a new name
vars["User::myStringVariable"].Value = "new value";
// Release the locks
vars.Unlock();
Dts.TaskResult = (int)ScriptResults.Success;
For reference:
https://connect.microsoft.com/SQLServer/Feedback/Details/991697
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Reg: CDC in SSIS 2012

Hi Team,
I was working in SQL Server 2005,2008R2 but I'm new to SQL Server 2012. CDC related tasks can be done now in SSIS 2012. I'm going thru the below link for CDC
http://www.mattmasson.com/2011/12/cdc-in-ssis-for-sql-server-2012-2/
I need to understand below parts:
1) It is mentioned that cdc related system tables will be created for a table. Will these tables be created for every table?
2) By using this, we can replace Table Difference (3rd party task). Am i right?
Rgds,
Shree

Hi Shree,
Question 1: Taking Matt’s demo in his blog as example, only the cdc.dbo_DimCustomer_CDC_CT table out of the seven system tables is created for the DimCustomer_CDC table on which we enable CDC. The other six system tables are created when we enable CDC for
the TestDB and serves all the CDC enabled tables in the database.
Question 2: Not clear about the third party Table Difference component you mentioned, maybe the
Cozyroc Table Difference component? If you are using the Table Difference component to implement incremental load against a single source table, you should be able to replace it with CDC related tasks.
However, you are comparing two different tables, the CDC related task is not suitable.
Regards,
Mike Yin
TechNet Community Support

HELP: SSIS 2012 - Execute SQL Task with resultset to populate user variables produces DBNull error

I am experiencing an unexplainable behavior with the Execute SQL Task control in SSIS 2012. The following is a description of how to simulate
the issue I will attempt to describe:
1. Create a package and add two variables User::varTest1 and User::varTest2 both of String type with default value of "Select GetDate()"
for each, have shown this to not matter as the same behavior occurs when using a fixed string value or empty string value.
2. Add a new Execute SQL Task to the control flow.
3. Configure an OLE DB connection.
4. Set SQLSourceType = "Direct Input"
5. Set the ResultSet property of the task to "Single Row"
6. In the ResultSet tab add two results as follows:
Result Name: returnvalue1, Variable Name: User::varTest1
Result Name: returnvalue2, Variable Name: User::varTest2
7. Set an expression for the SqlStatementSource property with a string value of "Select 'Test' returnvalue1, 'Testing' returnvalue2'"
The idea is that the source would be dynamically set in order to run a t-sql statement which would have dynamic values for database name
or object that would be created at runtime and then executed to set the user variable values from its resultset. Instead what occurs is that a DBNull error occurs.
I am not sure if anyone else has experienced this behavior performing similiar actions with the Execute SQL Task or not. Any help would be
appreciated. The exact message is as follows:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "varRestoreScript": "The type of the value
(DBNull) being assigned to variable "User::varRestoreScript" differs from the current variable type (String). Variables may not change type during execution. Variable types are strict, except for variables of type Object.
User::varRestoreScript is the first return value. And even with the a dummy select the same result occurs. I have narrowed the issue down
to the T-SQL Statement structure itself.
The following works just fine within the execute sql task control as long as no resultset is configured for return:
"Declare @dynamicSQL nvarchar(max)
Select @dynamicSQL = name
From sys.databases
Where name = 'master'
Select atest_var1=@dynamicSQL, atest_var2='static'"
I have tried various iterations of the script above with no success. However, if I use the following derivative of it the task completes
successfully and variables are set as expected. This will not work for my scenario however as I need to dynamically build a string spanning multiple resultsets to build one of the variable values.
"Select atest_var1=name, atest_var2='static'
From sys.databases
Where name = 'master'
I have a sample package which can reproduce this issue using the above code. You can get to that through the post on www.sqlservercentral.com/Forums/Topic1582670-364-1.aspx
Scott

Arthur, the query when executed doesn't return a null value for the @dynamicSQL variable. It returns "master" as a string value. Even the following fails which implements that suggestion:
Declare @dynamicSQL as nvarchar(max)
Select @dynamicSQL = name
From master.sys.databases
Where name = 'master' -- (or any other DB name)
I believe I have found the cause of the issue. It is datatype and size related. The above script will properly set the variables in the resultset as long as you don't use nvarchar(max) or varchar(max). This makes the maximum data size for
a String variable 4000 characters whether unicode or non-unicode typed.

SSIS 2012 job hangs dataflow task

hi all,
i have 2 data flow tasks in a package that run based on parameters.
the package is being run as a sql agent job using catalog execution model.
the job sometimes hangs without reason. also, when i looked at the target sql tables, only few rows have been loaded into the 2 target tables and stopped when the job hanged,
the data flow tasks loads data from source into a target sql table.please advice on why the job hangs, are there issues with the catalog model of ssis 2012 that is causing this?

Perhaps this info (scripts) somehow shed light on the problem
http://sqlblog.com/blogs/davide_mauri/archive/2014/07/23/ssisdb-analysis-script-on-gist.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

XML Task in SSIS 2012

Hi All,
I need help on one requirement in SSIS 2012, Please let me know for any suggestions or solution.
I have two XML files having different structure, I have to manipulate data by applying XSLT and creating single output xml. (Which needs to pass these 2 Xml files and 1 xslt to SSIS task)
In SSIS we have in-built XMLTask which will take XSLT operation of 1 xml and 1 xslt to deliver new output xml, Is there any way to pass 2 xml files and 1 xslt to get new output xml?
Thanks for any help

Hi visakh,
i have tried as you said.but still i am not able to load multiple Xml files.
I'm having a problem using the Foreach Loop container that contains an XML Task followed by a data flow task. When I run my package in the debugger,
the XML Task fails with the following errors: [XML Task] Error: An error occurred with the following error message: "Data at the root level is invalid. Line 1, position 1.". [XML Task] Error: Property "New Source" has no source Xml Text; Xml Text is either
invalid, null or empty string.
The Foreach Loop container is a file enumerator. The XML Task validates XML files using an XSD file. The XML Task SourceType is a XSLTand the Source has the variable set by the Foreach Loop (index 0). I have an XML file which I know is valid. For some reason,
the XML Task Source is not referencing the variable, set by the Foreach loop.
If I use a file connection to the existing XML file, instead of using the variable, the XML Task validates the file successfully. I believe there might be a bug in the XML Task when a variable is specified. If I disable the task and let my data flow task run,
it has no problem importing each XML file, in the directory, using an XML Source that uses the Foreach loop variable for the Source. My data flow completes correctly.
Thanks

How adding a data source-data destination inside SSIS 2012-SSDT

Hi,
I need to see inside a SSIS 2012 project a new SSIS installed component but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane:
It seems a SSIS bug.
Any helps to me, please?
Thanks

Hi,
In SQL 2012 you are no longer required to manually pick the tasks and components you want to use. You have to select from the new custom SSIS Toolbox to use the additional components you need.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.

Hi Guys,
SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.
Note: I have couple of ETLs developed in 2005 using same logic and upgraded to 2012, working perfectly.
I am getting Error Message:
SSIS
Error Code
DTS_E_OLEDBERROR.
An OLE DB
error has occurred.
Error code: 0x80004005.
An
OLE DB
record is available.
Source: "Microsoft OLE DB Provider for SQL Server"
Hresult: 0x80004005
Description: "Error converting data type varchar to datetime.".
Unable
to retrieve
column information
from the data
source. Make
sure your target
table in
the database is
available.
"OLE DB Source"
failed validation
and returned
validation status
"VS_ISBROKEN".
I tried below word around and found It is working perfectly.
I loaded data into a table (dbo.TEMP) using Stored procedure and then I used this dbo.TEMP table in OLEDB source and then found no issue.
MY SP Details: (This SP I am calling in OLEDB source of ETL) and when I run it from one server IT is working fine and when I run from ETL dedicated Server getting error: Guys Help me out.
USE
[TEST_DB]
GO
SET
ANSI_NULLS ON
GO
SET
QUOTED_IDENTIFIER ON
GO
ALTER
PROCEDURE [DBO].[SP_TEST]
--EXEC [DBO].[SP_TEST] '2014-09-30','2014-10-01'
@FROMDATETIME
DATETIME,
@TODATETIME
DATETIME
AS
SET
NOCOUNT ON
BEGIN
DECLARE
@FROMDATEKEY INT,
@TODATEKEY INT,
SET
@FROMDATEKEY=
CONVERT(VARCHAR(10),@FROMDATETIME,112)
SET
@TODATEKEY=
CONVERT(VARCHAR(10),@TODATETIME,112)
IF 1 = 1
BEGIN
SELECT
CAST(NULL
AS DATETIME)
AS TXN_DATE
, CAST(NULL
AS DATETIME
) AS PROCESS_DATE
, CAST(NULL
AS money)
AS S1_AMT
, CAST(NULL
AS money)
AS S2_AMOUNT
, CAST(NULL
AS money)
AS S2_INVALID_AMOUNT
, CAST(NULL
AS money)
AS INVALID_MOVED_IN_VALID_S2_AMOUNT
, CAST(NULL
AS VARCHAR(20))
AS SYSTEM_ID
, CAST(NULL
AS money)
AS S3_AMT
END
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_1
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
UNION
ALL
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_2
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
UNION
ALL
SELECT
TXN_DATE
,PROCESS_DATE
,S1_AMT
,S2_AMOUNT
,S2_INVALID_AMOUNT
,INVALID_MOVED_IN_VALID_S2_AMOUNT
,SYSTEM_ID
S3_AMT
FROM
DBO.TABLE_3
WHERE TNX_DATE_KEY
BETWEEN @FROMDATEKEY
and @TODATEKEY
END
Data Source Mode: SQL Command for Variable
"EXEC [DBO].[SP_TEST] '"+ (DT_WSTR, 24) @[User::V_EXTRACT_FROM_DT] +"','"+ (DT_WSTR, 24) @[User::V_EXTRACT_TO_DT] +"'"
Where variable @[User::V_EXTRACT_FROM_DT] and @[User::V_EXTRACT_TO_DT] is defined as DATETIME
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi,
Yes you are right. At one sever where I was getting error, DateTime was in USA format and Where It was running successfully was in AUS format.
I changed from USA to AUS and I did another changes:
Data Source Mode: SQL
Command
EXEC [DBO].[SP_TEST]
@FROMDATETIME = ?,
@TODATETIME = ?
and It is working fine.
Thanks Shiven:) If Answer is Helpful, Please Vote

SSIS-Execute Process task Error in 2012 version _File/Process "\\Servername\Foldername\batfile.bat" is not in path

Hi Sir,
I have develop the SSIS Package in 2012 version and i am calling the SSIS Package using Stored Procedure according to my requirement and that stored procedure will be using in my SSRS report Datasource.
once after the SSIS Pacakge has design and develop and deploy into the server as Project Deployment model..when i run the ssis Package ,calling through the SP it is working fine...
even when i design a SSRS report using SSDT(sql server data tools), in the SSRS reprot calling the above SP in Dataset.when i execute the SSRS report it is wroking fine...
once SSRS report has been deployed into the remote Server.. when i Execute the SSRS report i am getting the below Error message:
SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path
belo is the SP for calling the SSIS package.
DECLARE @EXECUTION_ID BIGINT,
        @PKG_RESULT INT
EXEC [SSISDB].[CATALOG].[CREATE_EXECUTION] @PACKAGE_NAME=N'abc.DTSX',
                                           @EXECUTION_ID=@EXECUTION_ID
OUTPUT,
                                           @FOLDER_NAME=N'aa',
                                           @PROJECT_NAME=N'xxx',
                                           @USE32BITRUNTIME=FALSE,
                                           @REFERENCE_ID=29 --unique identifier for environment
EXEC [SSISDB].[CATALOG].[START_EXECUTION] @EXECUTION_ID

Where the BAT part is ?
It looks like a security issue.
The account running has no permission apparently over "\\Servername\Foldername\batfile.bat"
Arthur My Blog

Error when trying to use excel source editor in SSIS 2012

I am using SQL Server 2012. This error occurs when I try o select the name of excel sheet in excel source editor in SSIS 2012. I am on win 7 64 Bit machine. I have office 2010.
Could not retrieve the table information for the connection manager 'Excel Connection Manager'. Failed to connect to the source using the connection manager 'Excel Connection Manager'.
Thanks in advance

Hi Satya, I even tried installing 32-bit ACE OLE DB providers even before posting this and I do not have permissions
to install it on my machine. I will work with IT Dept and update the status on how it goes.
Thanks

Byte input to Webservice Task in SSIS 2012

Hi,
I have just created a new project in SSIS 2012 and I am using a webservice task in a package.
I imported the WSDL file and I have several inputs to set to use it properly.
I put variables on the 4 first inputs that are strings with success but I have a problem with the last one.
The last one is called xmlData and is in "byte" type and I can not set it correctly.
In the XSD file I have this definition: <xsd:element
minOccurs="0" name="xmlData" nillable="true" type="xsd:base64Binary"
/>
It is supposed to contain a XML file that I have to encode in base64 and then fill the xmlData with the binary value.
To encode my XML file to base64 I use a C# task but I do not know how to declare the value and how to set it.
I do it this way:
FileStream myStream = new FileStream(@"H:\myXML.XML", FileMode.Open, FileAccess.Read);
BinaryReader reader = new BinaryReader(myStream);
byte[] fichierXML = new byte[reader.BaseStream.Length];
for (int i = 0; i < reader.BaseStream.Length; i++)
fichierXML[i] = reader.ReadByte();
reader.Close();
myStream.Close();
string xmlAsString = EncodeBytesAsBase64(fichierXML);
MessageBox.Show(xmlAsString);
// Conversion de la String en byte[]
byte[] xmlData = System.Text.Encoding.UTF8.GetBytes(xmlAsString);
Dts.Variables["User::monXmlData"].Value = xmlData;
My variable User::monXmlData is an Object and there is no problem in execution.
The C# script runs well and the webservice task too but I always get an error response for the webservice saying that my xmlData field is not correct.
I think that my base64 encoding is correct because when I copy the result in my messagebox and paste in base64 decode on a free web decoder I get my original XML text.
Is there someone who can help me please?

Thanks to all that took some time to read me.
I have finally found the solution.
The Base64 encoding is not necessary. It is automatically done by the webservice when the request is sent.
The important thing to remember is that when you have to send a "byte[]" variable, you have to use a "Object" variable as an imput for the webservice.

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

CDC SSIS 2012 ,CDC TASK,CDC Source,CDC Splitter

Similar Messages

Maybe you are looking for