CDDB error and HTTP processing error

when I try to add a new CD to my library I get CDDB error and HTTP processing errors..... and download will only show the number of tracks and the time each track will play...this only happens on my PC.... and everything works ok on my laptop... I have tried the latest update...and I have compared settings between the two computers but haven't found the problem...

Since a recent update of itunes I cannot get CD track
names from Gracenote anymore. This problem only
occurs on my windows profile and not on other
profiles on the same computer. When I load an audio
CD, itunes recognises it but doesn't name tracks.
When I click on "Get CD track names" in the advanced
menu it starts as normal and then I get a window with
the message 'CDDB Error. HTTP processing Error.' I
have tried a second itunes download, which according
to the install wizard repaired all faults.... still
happening though. I don't have enough time in my life
to type in all the track names! Any help gratefully
received.
Sony Vaio
Windows XP
Solution document found!
Refer to www.info.apple.com/kbnum/n302538
Insert an additional step:
6a. Click on Disable All.
It takes a while to test one or a few items at a time, but it works! If you find these in your Startup list try selecting all and then unselecting these first. One of these was the problem for me but I haven't narrowed it down to one of them yet.
nwiz
SNDMon
dlbcserv
Copy Protection Notifier
Good Luck.
disaacson1
Toshiba Satellite P25 PC Windows XP

Similar Messages

CDDB Error. HTTP Processing Error.

After working flawlessly, iTunes now not getting the CD information when trying to download new CDs. I get the subject named error when highlighting a track and under the advanced menu, ask it to get the track name. Help!
compaq Windows XP

This is a bug and Apple should address it.
I am experiencing the same issue and have for some time. The boys at the local Genius Bar where about as useful as a two legged tripod.
I am not using any acceleration software. My ISP is setup to automatically assign the IP so I do not believe that it's a proxy issue.
I have also opened up my firewall to allow iTunes unfettered access.
Other applications that access the Gracenote db work fine.
I would appreciate some useful information.

Need to solve error message. CDDB error. HTTP processing error.

there seems to be no technical information available on this and it is extermely frustrating.
Dell Windows XP

Hello,
Check the message in these T.Code and change category from E to W.
OPJB for production messages
OBA5 for CO messages
OMT4 for material master messages
OMCQ Batch and quantity related.
Also you can check SE91 for this.
Regards,
Pallavi

Help - Getting "CDDB Error. HTTP Processing Error" Message

I am running Windows XP with Norton Internet Security 2006. I am trying to import regular, purchased CDs, but Itunes will not access the track names.
A posting on another site recommended clicking off on the Enable Browser Security in the Privacy controls, but that did not work.
Any other suggestions as to why it will not connect to CDDB?
Dell Windows XP

I am running Windows XP with Norton Internet Security 2006. I am trying to import regular, purchased CDs, but Itunes will not access the track names.
if you've got NIS, we'd first better check on this possibility (it hits CDDB connections too):
iTunes cannot connect to the Music Store or Shared Music after installing Norton Internet Security

Problems Accessing Gracenote CDDB: "HTTP Processing Error" Help Please

I'm hoping for a bit of help here people, having a few problems I would be grateful for your assistance with!
I've been having trouble accessing Gracenote for a couple of months now. What was happening was that when I tried to search for the CD info on Mediasource, the gracenote icon would appear in the top left corner, and the screen loading as if obtaining the info, but then nothing happens and the info is left blank.
I have tried everything I know, and everything that has been suggested here! I have altered the ZoneAlarm settings, deleted the cddb file, checked that the settings in Mediasource are correct, downloaded the latest drivers, re-registered for gracenote manually and various other things. None of these have solved the problem.
Finally, I decided to completely re-install Creative Mediasource. After doing this, I tried to access gracenote again, and was asked to re-register. I did this, but then recieved an error message stating "Internal Socket Error". THis happened a couple of times, before the message was replaced with "HTTP Processing Error", whenever I try to access gracenote. It still will not recognise the music!
Basically, I am at the end of my knowledge and the end of my patience!!! I really don't know what more to do and so I'm throwing this open to you guys - any help would be so, so appreciated! The only this I can think is that my dad got an ipod two months ago, and has installed itunes on the PC. From what I understand, that uses gracenote too - are the two programmes clashing? If so, can anyone suggest a way I can alter this?
You're my last hope before I'm condemmed to a lifetime of filling in CD's by hand!!! I'll be really grateful if any of you guys can help me out!
Thanks!
David

Try delete the file "cddb.db" or/and "cddb.ds" (if they exist) under the directory "C:\Documents and Settings\YourName\Application Data\Creative\NetContent\MediaSource". See whether it hel
ps.
If the above does not help, then try the following:- Go to Start->All Programs->Accessories->Command Prompt. - Run the following commands in the command line to unregister the files: cd "C:\Program Files\Creative\Shared Files" CTRegsvr /u CDDBControlCreative.dll CTRegsvr /u CDDBUICreative.dll CTRegsvr /u CTCDDB.nco CTRegsvr /u NetCoMgr.nco- Run the following commands in the command line to register the files: CTRegsvr CDDBControlCreative.dll CTRegsvr CDDBUICreative.dll CTRegsvr CTCDDB.nco CTRegsvr NetCoMgr.nco

How to catch date errors and continue processing in a PL/SQL procedure

I'm updating a date field with dates constructed from day, month and year fields. The incoming data has many instances of day and month that are not valid dates, ex 11 31 2007. There is no 31st day in November.
I would like to write a pl/sql script to scan the table containing these values and log the rows that produce conversion errors.
I thought I could do this with exceptions but there are no exceptions that correspond to the ORA-01847 error for mismatched day and month.
Here is what I tried (the print procedure is a local wrapper for DBMS_OUTPUT.put_line):
PROCEDURE date_check IS
start1 DATE ;
BEGIN
select to_date(nvl(yearcollected,'9999') ||'/'|| nvl(monthcollected,'01') ||'/'|| nvl(daycollected,'01'),'YYYY/MM/DD'))) into start1 from incoming_data where id=1 ;
     BEGIN
          update temp_test set test_date = start1 where id=1 ;
     EXCEPTION
          WHEN OTHERS THEN
          print('Date error message from exception block');
     END;
print('Processing continues after handling date exception') ;
END date_check ;
Is there a way to catch this kind of error and continue processing after logging a message?
-=beeky

Hi, Beeky,
There are lots of different error messages associated with bad dates. Rather than try to catch them all, I use a BEGIN ... EXCEPTION block that contains nothing but a TO_DATE call. This is one of the rare occassions when I think "EXCEPTION WHEN OTHERS" is okay,
The following function comes from a package. If you want to make a stand-alone function, remember to say " *CREATE OR REPLACE* FUNCTION ...".
--          **   t o _ d t   **
--     to_dt attempts to convert in_txt (assumed to
--          be in the format of in_fmt_txt) to a DATE.
--     If the conversion works, to_dt returns the DATE.
--     If the conversion fails for any reason, to_dt returns in_err_dt.
FUNCTION     to_dt
(     in_txt          IN     VARCHAR2                    -- to be converted
,     in_fmt_txt     IN     VARCHAR2     DEFAULT     'DD-MON-YYYY'     -- optional format
,     in_err_dt     IN     DATE          DEFAULT     NULL
RETURN DATE
DETERMINISTIC
AS
BEGIN
     -- Try to convert in_txt to a DATE. If it works, fine.
     RETURN     TO_DATE (in_txt, in_fmt_txt);
EXCEPTION     -- If TO_DATE caused an error, then this is not a valid DATE: return in_err_dt
     WHEN OTHERS
     THEN
          RETURN in_err_dt;
END     to_dt
;

OWB mappings to skip rows that are in error and continue processing

OWB mappings to skip rows that are in error and continue processing.
1) Enter a record into an error log
2) Skip rows that are in error
3) and continue processing
Type of information could be needed in the error log:
SY_LOG_ERROR_KEY
ERROR_TIMESTAMP
MAP_NAME
SOURCE_RECORD
ERROR_CODE
ERROR_MESSAGE
ERROR_NOTES
Example:
If the source table has five records, in that 3 records has some error.
When I run the OWB mapping to load the source data to target table, OWB should skip the 3 record and load all the remaining record. This is our requirement.
Another think I want to store the error record details in a error log table.
Can u plz tell me whether it is possible in OWB. If not means please give some suggestion to do this.

Hi,
thanks for ur help, As is OWB version is 10.2.0 so for set based it is not working. with your idea i create a POST PROCESSING MAPPING. it is now working fine.
Step 1:
Create a table MAP_ERROR_LOG.
Script:
CREATE TABLE MAP_ERROR_LOG
ERROR_SEQ NUMBER,
MAPPING_NAME VARCHAR2(32 BYTE),
TARGET_TABLE VARCHAR2(35 BYTE),
TARGET_COLUMN VARCHAR2(35 BYTE),
TARGET_VALUE VARCHAR2(100 BYTE),
PRIMARY_TABLE VARCHAR2(100 BYTE),
ERROR_ROWKEY NUMBER,
ERROR_CODE VARCHAR2(12 BYTE),
ERROR_MESSAGE VARCHAR2(2000 BYTE),
ERROR_TIMESTAMP DATE
TABLESPACE ODS_D1_AA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 80K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
Step 2:
Create a sequence MAP_ERROR_LOG_SEQ
CREATE SEQUENCE MAP_ERROR_LOG_SEQ START WITH 1 INCREMENT BY 1
Step 3:
Create a procedure PROC_MAP_ERROR_LOG through OWB.
In this i have used 3 cursor, first cursor is used to check the count of error messages for the corresponding table(WB_RT_ERROR_SOURCES).
The second cursor is used to get the oracle error and the primary key values.
The third cursor is used for get the ORACLE DBA errors such as "UNABLE TO EXTEND THE TABLESPACE" for this type errors.
CREATE OR REPLACE PROCEDURE PROC_MAP_ERROR_LOG(MAP_ID VARCHAR2) IS
--initialize variables here
CURSOR C1 IS
SELECT COUNT(RTA_IID) FROM OWBREPO.WB_RT_ERROR_SOURCES
WHERE RTA_IID =( SELECT MAX(RTA_IID) FROM OWBREPO.WB_RT_AUDIT WHERE RTA_PRIMARY_TARGET ='"'||MAP_ID||'"');
V_COUNT NUMBER;
CURSOR C2 IS
SELECT A.RTE_ROWKEY ERR_ROWKEY,SUBSTR(A.RTE_SQLERRM,1,INSTR(A.RTE_SQLERRM,':')-1) ERROR_CODE,
SUBSTR(A.RTE_SQLERRM,INSTR(A.RTE_SQLERRM,':')+1) ERROR_MESSAGE,
C.RTA_LOB_NAME MAPPING_NAME,SUBSTR(B.RTS_SOURCE_COLUMN,(INSTR(B.RTS_SOURCE_COLUMN,'.')+1)) TARGET_COLUMN,
B.RTS_VALUE TARGET_VALUE,C.RTA_PRIMARY_SOURCE PRIMARY_SOURCE,C.RTA_PRIMARY_TARGET TARGET_TABLE,
C.RTA_DATE ERROR_TIMESTAMP
FROM OWBREPO.WB_RT_ERRORS A,OWBREPO.WB_RT_ERROR_SOURCES B, OWBREPO.WB_RT_AUDIT C
WHERE C.RTA_IID = A.RTA_IID
AND C.RTA_IID = B.RTA_IID
AND A.RTA_IID = B.RTA_IID
AND A.RTE_ROWKEY =B.RTE_ROWKEY
--AND RTS_SEQ =1
AND B.RTS_SEQ IN (SELECT POSITION FROM ALL_CONS_COLUMNS A,ALL_CONSTRAINTS B
WHERE A.TABLE_NAME = B.TABLE_NAME
AND A.CONSTRAINT_NAME = B.CONSTRAINT_NAME
AND A.TABLE_NAME =MAP_ID
AND CONSTRAINT_TYPE ='P')
AND A.RTA_IID =(
SELECT MAX(RTA_IID) FROM OWBREPO.WB_RT_AUDIT WHERE RTA_PRIMARY_TARGET ='"'||MAP_ID||'"');
CURSOR C3 IS
SELECT A.RTE_ROWKEY ERR_ROWKEY,SUBSTR(A.RTE_SQLERRM,1,INSTR(A.RTE_SQLERRM,':')-1) ERROR_CODE,
SUBSTR(A.RTE_SQLERRM,INSTR(A.RTE_SQLERRM,':')+1) ERROR_MESSAGE,
C.RTA_LOB_NAME MAPPING_NAME,SUBSTR(B.RTS_SOURCE_COLUMN,(INSTR(B.RTS_SOURCE_COLUMN,'.')+1)) TARGET_COLUMN,
B.RTS_VALUE TARGET_VALUE,C.RTA_PRIMARY_SOURCE PRIMARY_SOURCE,C.RTA_PRIMARY_TARGET TARGET_TABLE,
C.RTA_DATE ERROR_TIMESTAMP
FROM OWBREPO.WB_RT_ERRORS A,OWBREPO.WB_RT_ERROR_SOURCES B, OWBREPO.WB_RT_AUDIT C
WHERE C.RTA_IID = A.RTA_IID
AND A.RTA_IID = B.RTA_IID (+)
AND A.RTE_ROWKEY =B.RTE_ROWKEY (+)
AND A.RTA_IID =(
SELECT MAX(RTA_IID) FROM OWBREPO.WB_RT_AUDIT WHERE RTA_PRIMARY_TARGET ='"'||MAP_ID||'"');
-- main body
BEGIN
DELETE ED_ODS.MAP_ERROR_LOG WHERE TARGET_TABLE ='"'||MAP_ID||'"';
COMMIT;
OPEN C1;
FETCH C1 INTO V_COUNT;
IF V_COUNT >0 THEN
FOR REC IN C2
LOOP
INSERT INTO ED_ODS.MAP_ERROR_LOG
(Error_seq ,
Mapping_name,
Target_table,
Target_column ,
Target_value ,
Primary_table ,
Error_rowkey ,
Error_code ,
Error_message ,
Error_timestamp)
VALUES(
ED_ODS.MAP_ERROR_LOG_SEQ.NEXTVAL,
REC.MAPPING_NAME,
REC.TARGET_TABLE,
REC.TARGET_COLUMN,
REC.TARGET_VALUE,
REC.PRIMARY_SOURCE,
REC.ERR_ROWKEY,
REC.ERROR_CODE,
REC.ERROR_MESSAGE,
REC.ERROR_TIMESTAMP);
END LOOP;
ELSE
FOR REC IN C3
LOOP
INSERT INTO ED_ODS.MAP_ERROR_LOG
(Error_seq ,
Mapping_name,
Target_table,
Target_column ,
Target_value ,
Primary_table ,
Error_rowkey ,
Error_code ,
Error_message ,
Error_timestamp)
VALUES(
ED_ODS.MAP_ERROR_LOG_SEQ.NEXTVAL,
REC.MAPPING_NAME,
REC.TARGET_TABLE,
REC.TARGET_COLUMN,
REC.TARGET_VALUE,
REC.PRIMARY_SOURCE,
REC.ERR_ROWKEY,
REC.ERROR_CODE,
REC.ERROR_MESSAGE,
REC.ERROR_TIMESTAMP);
END LOOP;
END IF;
CLOSE C1;
COMMIT;
-- NULL; -- allow compilation
EXCEPTION
WHEN OTHERS THEN
NULL; -- enter any exception code here
END;

Error "Unkown Bravo Error" and "Invalid Container Error"

I am trying to render in After effects and keep getting the error "Unkown Bravo Error" and "Invalid Container Error". What do I do to resolve this?

Try using the "secret" preferences to purge every couple of frames. If you hold Shift while clicking on After Effects > Preferences > General, the Secret menu should pop up in the sidebar of the Preferences dialog.
Alternatively, if rendering to a QuickTime with the video codec set to PNG instead of Animation didn't work, try rendering to a PNG sequence and not a video format at all.

CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41)

Msg 2511, Level 16, State 2, Line 1
Table error: Object ID 41, index ID 1, partition ID 281474979397632, alloc unit ID 281474979397632 (type In-row data). Keys out of order on page (1:187), slots 9 and 10.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'db_name'.
repair_rebuild is the minimum repair level for the errors found by DBCC CHECKDB (adv_tvs).
Help required on the above error mentioned

Hi Rapunzel,
The minimum repair suggested is repair_rebuild you can try that. As per mssage there is corruption in your database and it can only be corrected by either repairing or Restoring from known good backup.For doing repair the database must be in single-user
mode.
Please read
dbcc checkdb repair_rebuild option
Since DBCC CHECKDB with any of the REPAIR options are completely logged and recoverable, Microsoft always recommends a user use CHECKDB with any REPAIR options within a transaction (execute BEGIN TRANSACTION before running the command) so that the user can
confirm he/she wants to accept the results of the operation. Then the user can execute COMMIT TRANSACTION to commit all work done by the repair operation. If the user does not want to accept the results of the operation, he/she can execute a ROLLBACK TRANSACTION
to undo the effects of the repair operations.
REPAIR_REBUILD does not repair errors involving FILESTREAM data.
How big is database. If it is small and backup also is corruption free you should consider restoring from backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How do I fix the following error message: HTTP Server Error 503?

I no longer can access the Internet by pressing the Internet button on my computer. I receive the following error message: HTTP Server Error 503. How do I fix that problem.

http://pcsupport.about.com/od/findbyerrormessage/a/503error.htm

HTTP Processing Error in itunes 7.0.2

I can't seem to get itunes to read cd information thru CDDB. The computer is connected to the internet via a free wireless network which could have something to do with it. Itunes store works, internet works, but no track names? The information is on The CDDB website but it won't link my computer to the server. Any help is appreciated.
MacBook Core Duo 2 GHz 2 GB Mac OS X (10.4.8)

Do you know any other tricks or ways to connect within the system? I think everything dealing with the wifi signal checks out. All of the proxy and HTTP info looks to be good. Could it be an internal system error preventing the CDDB preferences from connecting? Is there a way to scan itunes for errors?

BPC DeleteOlapDimFromCube error and Analysis Sevices error (-2147221421)

Attempted to process a dimension in BPC and encountered the following error message:
-DeleteOlapDimFromCube : Item not found in collection
-Dimension is locked because it is currently being used in a cube. Remove the dimension from the cube
Went to Analysis Services and successfully procesed the dimension and all but one of the applications.
Error message recieved was:
Error(-2147221421) Internal error could not update the query log.
Any ides?

It seems for that specific application you have bad data into fact tables or cube is corrupted.
First you have to check the data using query like:
select count(*) from tblfact"application" where "dimension" not in (select count [id] from mbr"dimension where calc = 'N')
this should always provide 0 like result.
If you receive any result <> 0 then you have to delete the records using delete instead of select count(*).
From error message it seem the cube is corrupted.
In this case you have to delete from Management studio the specific cube for your application and after that from Admin console of BPC you have to do modify application with full process and reindex.
This should fix the problem.
After that probably you will be able to any task using that specific dimension.
Kind Regards
Sorin Radulescu

Error: f60webm(HTTP)FATAL ERROR:Not enough read buffer

I am getting an error as follows with the Forms Server.
f60webm(HTTP)FATAL ERROR:Not enough read buffer
The error occurs after a forms session is closed, meaning that I can start the server, load up the forms client in my browser, run the application and do everything normally, but when I close the application at the client end, the server dies with the above message
This particular server has been running quite happily for a couple of months using the socket method. I need to deploy this system using HTTPS and started testing the HTTP method first as I thought this would be easier. All I have changed so far is the connect method.
Any ideas on how to fix this? As soon as I get my cerificates sorted out I will be testing the HTTPS method as well, I hope this does not have the same problem, but I'm expecting that it will.
Regards
Michael Anthon

I am seeing the same error that you are experiencing when I run the forms server in http or https mode. I beleieve this same problem is seen under the Solaris version of 9iAS v. 1.0.2.0.0. On Solaris this error is fixed by applying one of the latest patchsets for Dev. 6i...I can't remember which one, but I think we are up to patchset 3 or 4 on a couple of my company's production forms servers and we are running in https mode. The forms server probably will not be able to operate correctly under http or https on Linux until Oracle releases a Linux version of the Dev 6i patchsets for Linux, or if an updated version of Dev 6i is available when 9iAS v. 1.0.2.1.0 for Linux is released. I'm afraid that sockets mode is the only available option at this time for running the Dev 6i forms server on Linux.
If anyone has any information to the contrary, please let us know.
Thanks,
Mike

Confuse between temp file error and perment file error

during the weekend, i usually maintain our database and this weekend i end up with strange situation,
i lunched my scripts to reorginize datafiles, however the scripts is crash all the time due to weird message which is in my opinion is misleading ora message.
this is the situaion:
i am using this scripts to tell me if my datafiles are full or not
1 L_INDEX 24 107.12109375 103.74609375 3.375 0 96.8493600262553 3.15063997374467
2 L_TABLES 30 108.2939453125 97.1689453125 11.125 0 89.7270341680719 10.2729658319281
as you can see, the free space on the l_index tablespace is now 3G and need to reogrinze to free space, however when we run our scripts to free spaces by moving objects to tools tablespace and then return them back,
I recieve this message:
ORA-01652: unable to extend temp segment by .......
to solve this error is adding new temp files, however we have 5 temps file and there were pantly of space there and also i add 2 new files with size 1g and maxsize is 32G, still i am receving this error and my scripts crash when i try to rebuild the index,
the workaround was is adding new datafile to l_index and try again to rebuild the index and it works,
so i am wondering if the problem was on the datafiles, why i recieved error about temp, i waste some time thinking that my problem was with temp, however the real problem came from l_index tablespace.
oracle verison is 10.1.0.4 and os is windows
Thanks

ORA-01652: unable to extend temp segment by Temporary tablespace is also used when re-creating or creating indexes in database.
A temp segment is created the moment create or re-build indexes command is issued and will be held until the index is being created completely. If either of the tablespace have insufficient space, you might get the error ORA-1652 or ORA 1654.
You should be looking at the tablespace name for adding space instead of looking temp segment.
ORA-1652: unable to extend temp segment by in tablespace

How i can fix "Wiki setting error" and "Running time error" ?

I've found this message when using server app on Mountain lion.
and this error data.
Can i fixed this? Thanks guys!

It so happens that I saw an answer to a similar question today somewere else. I have not tested this myself:
"I have the final solution and fix but beware you may not like it that much.
Having had all of the above problems with more or less everything I finally pieced it all together from various threads. This will fix both the AEBS control and the central services problems. Dont shout at me for being a bit basic and not coding etc. but it worked for me. If I can avoid code I do as often as possible as am less likely to balls it up!
This method will loose some data but the main files and users do remain
The Fix:
1. Close Server.app
2. Library/Server make a copy of Server file under a diff name as software server files and a few others would appear to still be usable and you will have to re download it all again of you dont copy it back in ( I didn't and now have learned my lesson). then delete the whole of the Server file.
3. Go to Keychain and search all Airport then delete associated keys permissions etc
4. Delete Server.app and reinstall.
5. Start new setup and it will migrate properly with no errors. This time a big green tick will appear!
6. Replace the software update files into the new Library/Server folder if you want to or leave it untill the rest is done
7 Reconfigure any missing bits..... any enrolled devices will have vanished but probably if you have saved the data from this in Library/Server prior to deletion you may be able to reinstate this but I didnt risk it
This is going to be a total pain if in a large organisation but once working the system is excellent with no swapping from one control set to the other. As each service is switched on it auto configures the AEBS and no further errors and a joy to work with unless you really like to get into the nuts and bolts.
Hope this helps and good luck"

CDDB error and HTTP processing error

Similar Messages

Maybe you are looking for