CDE FREEZES ON START UP

When I reboot the machine , the CDE screen comes up.
Then after i login and enter , it says "opening the Common Desktop Environment"
and freezes displaying this mesg. I am running it on
Sun Solaris 2.6.
Any pointers would be appreciated.....

Which user u are logging in ?. if you are logging other than "root" user, then login in as "root"
and check the home directory path for the user you are trying to login in admintool.

Similar Messages

Exceeded RAM..was crashing now freezes on start-up screen..HELP!!

My mac is only about 2 mths old.
I've got about 15GB music, lots of tv shows (about 13 series) and yesterday I installed Microsoft Office.
My mac had been freezing occasionally before and I would just have to resart it. The cursor would freeze on the page.
Well as I said yday I installed Microsoft Office and also downloaded 4GB worth of TV shows and another 2-3GB music and tonight it has crashed.
At first it was freezing after a minute or two of being on, no pages would load especially internet pages with lots of pictures.
I've restarted it a lot trying all the different combo's on the discussions/forums but it still seems to just freeze on start up.
Resarting whilst holding down Command-S gives me
"error enabled
uncorrected error
mca error code: 0x0400
model specific error code: 0x2008
other info: 0x00001210
debugger called: <panic>
backtrace <cpu 1>, frame: return adress {4 potential args on stack)
I just put in what I thought might be significant.
It freezes after that page and wont let me type anything..
Have tried resetting PRAM, resarting in Safe Mode, resarting with mac disk that came in box...
Nothing is plugged in.
I totally forgot about my mac having limited RAM :S

All good... I quickly typed in 'fsck -fy' Return
before it froze.
It ran through some checks. Then typed in 'reboot' Return. It booted up. Halleljah!
The cursor was still acting up a bit, jumping around and lagging. I managed to uninstall microsoft office, skype, sims 3 and some other crap I didn't use. Seems to be running perfect now.
That'll teach me to get an external hard-drive...

IPod touch 2g freezes at start up ipod logo and does not connect to itunes

Hey, so my iPod touch 2g freezes at start up ipod logo when in the charger. Then when off the charger after a couple minutes it goes black. when i connect it to my computer does not connect to itunes so i can not restore it. please help!!!

Try to reset it by pressing and holding the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. Maybe it help.

My macbook keeps turning off and freezing on start up

So like my macbook keeps either freezing on start up or it will just shut off or restart itself
When it restarts itself it will bring up the main screen then this box comes up telling me to hold down the power button and restart it
A friend said it might have something to do with the fan not working or it overheating
But I can have it off all night then turn it on in the morning and it will mess up
It will do it sometimes between 2-4 times
I don't know what is making it does this
I ran the check up things and it said that nothing was wrong?

This sounds like the same thing that has been happening to both my Macbook and Macbook Pro. Some others sound like they have similar problems. This is what I posted in the Macbook Pro area regarding the same symptoms. This is discouraging. These computers are expensive and they should have the bugs worked out better than this.
From: Massachusetts
Registered: Mar 5, 2006
Re: Brand New MacBook Pro 2.33GHz dies
Posted: Nov 16, 2006 3:52 PM in response to: Newton
Reply Email
I wonder if I have similar problems. I have both a Macbook Pro 15" and a Macbook 13"
1st my macbook started shutting itself off unexpectedly. It got more and more frequent. I have done several fixes including: archive and install, sending it in to have a logic board replaced, downloading an updated disc utility repair, and sending it in to have a power component replaced. Now I will be sending it in for a third time and I think they will replace the Macbook machine if this repair doesn't work.
Now my Macbook Pro is doing the same thing. I have had it for about 6 months and it was running fine until now. I ran the exact same software on my 12 G-4 powerbook without any problems. One of the computer people at work said it sounds like a power problem. It happens whether it is running AC or on battery power and doesnt seem to matter what I am doing.
I am waiting for the macbook to be fixed before I address the Macbook Pro because I dont want to have both of my computers in the shop at the same time.
Any suggestions? This seems totally unacceptable for two new expensive computers.

After installation of Solaris 10 - CDE can not start

I have installed Solaris 10 on Sparc Machine but the CDE doesn't start .
I received the message :
Suspendind Desktop Login...
If currently logged out, press [enter] for a console login prompt.
desktop Login will resume shortly after you exit console session.
In the file /var/dt/Xerrors I have :
fbconsole: ioctl SRIOCSREDIR: Device busy
ioctl(MSIOSRESOLUTION): Invalid argument
ddxSUNWmouse: couldn't set absolute mouse scaling resolution on /dev/mouse
Tue Sep 12 11:54:15 2006
error (pid 2490): Can not lock pid file /var/dt/Xpid, another Dtlogin is running (pid 873)
I set the resolution of monitor for one supported :
fbconfig -res 1280x1024x60
But always I obtain the same thing,
Can someone help me ?
May thanks in advance,
Luz
Message was edited by:
166248
Message was edited by:
166248
Message was edited by:
166248

Perhaps your hardware / graphics adapter is not supported by Solaris 10.
Take a look at the Solaris Hardware Compatibility List:
http://www.sun.com/bigadmin/hcl/
Now, no need to download any bootable ISO image. Just run this Device Detect tool:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp

I have been using pse11 on wondows vista and it has certainly started freezing on starting and I am unable to access the organizer, the editor is ok. Have removed and reinstalled but is the same have changed the files as suggested. Have been unable to ope

I am using pse 11 0n windows vista for years and it has suddenly started freezing on starting, I am now unable to access the organizer it freezes on the blue screen, the editor can be opened. Have removed and reinstalled but is still occurring. Have changed the files as suggested, am unable to open as administrator

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

CS3 freezes when started on Mavericks

CS3 freezes when started on newly installed Mavericks (from 10.8). Last files are displayed and Regster window appears and then freezes up. Necessary to Force Quit to get out. I've "successfully" re-installed CS3 several times but the problem continues. What gives?

http://forums.adobe.com/thread/1342453?tstart=0
Mylenium

PS CC Freezes on start up.

I've read the other threads... but this is freezing on start up.
I have New Refurbished Dell Latitude Laptop PC Win 7, 16GB, NIVIDA Video card. I am in the process of slowly installing software and only have installed a few programs so far.
I installed PS CC and it opened and apeared to work ok with one test image. I closed out & powered down for the night. Powered up the next morning and opened PS CC and it opened to a frozen screen. No error msg, or anything... just a totally frozen PS standard first page.
Note: I also have both Bridge CS6 & Bridge CC (my only other CC program)... and both open & close ok (but I've not really tested them).
This CC is frustrating... had Preimere CC not work either and had to uninstall and load PP CS6 instead.
I have a teckie friend helping me and we are both yelling uncle.
Any help is appreciated.

I think I found the problem.
I have a 256GB SSD… it is so fast that PS CC loads so fast that when the “Adobe Do You Want to let adobe monitor your activities etc, etc,”… which is a really small file… so small it flashes on the screen and instantly PS CC loads on top of it and hides the Pop-up. And I mean flashes like a 1/10 of a second. The only way to then get to it is from the icon in the bottom tray because that Adobe pop-up box locks up the PS CC program until you click one of the Pop-up options to make the pop-up box go away.
The short answer... "Don't blink when PS CC Loads on a fast machine".

Gnome/GDM Issue - System freeze before starting Gnome every reboot.

Hi guys, sorry for my bad english.
I've a strange problem with Gnome/GDM DE.
Yesterday, I have installed gnome on my laptop but it works 1 times every 2.
The first time i power on my laptop it works, the second (or if i try to reboot) it freezes before starting GDM.
I can't switch tty, can't shutdown. I can only power off pressing power button.
How can i solve this problem? Anyone had this issue before?
PS: (I've installed arch yet on the same laptop using XFCE without problems)
Last edited by PixelMaster (2012-11-30 09:19:33)

I have the same issue and i can't find a solution.
there's my greeter log>
JS LOG: Error: Requiring IBus, version none: Typelib file for namespace 'IBus' (any version) not found
JS ERROR: !!! WARNING: 'assignment to undeclared variable _themeName'
JS ERROR: !!! WARNING: file '/usr/share/gnome-shell/js/ui/main.js' line 438 exception 0 number 156
JS LOG: GNOME Shell started at Fri Dec 28 2012 07:23:03 GMT-0300 (ART)
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
Advertencia del gestor de ventanas: CurrentTime used to choose focus window; focus window may not be correct.
Advertencia del gestor de ventanas: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
Advertencia del gestor de ventanas: Log level 8: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Advertencia del gestor de ventanas: Log level 8: g_source_remove: assertion `tag > 0' failed
gnome-session[2368]: WARNING: Detected that screensaver has left the bus
gnome-session[2368]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
(gnome-settings-daemon:2390): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon: La conexión está cerrada

Illustrator CS5 freezing on start up

I'm not sure what went wrong but suddenly Illustrator stopped working.. not while I was actually using it but now it just won't load. I see the orange start up screen it says loading fonts and that's it. It get stuck and eventually I have to use the task manager to quit the program.
I have the CS5 Master collection and all the other software are running fine. I tried reinstalling Illustrator & it's still doing the same thing.
My next step is I'm going to try uninstalling the entire CS5 Master Collection & then reinstalling.
Was there some file or folder other than the actual location where I installed Illustrator that's not being deleted when I reinstall?
I'm guessing this is why it's still not working.

I was having this same issue. I had also installed some fonts, after which Illustrator froze while "installing fonts," so I removed the fonts, but it didn't solve the problem. Illustrator continued to freeze on start up, albeit, now during "initializing."
The solution that worked for me ended up being very simple: hold down the Command-Option-Shift keys while starting Illustrator. Apparently it resets the applications preferences.
Hope this works for you too!

Illustrator CS3 freezing at start up

Hello, I recently bought an iMac with the Leopard operating system on it. I installed the adobe creative suite 3 not long after I bought the computer and it was working absolutely fine up until I went to install the disc for my internet service. When I put the disc in it asked me to quit running programs before continuing so I quit Extensis Suitcase. Now when I go to open Illustrator (as well as InDesign) they both freeze at start up and are non responsive. I'm just curious if it has anything to do with suitcase and how can I fix this? I already tried reinstalling just Illustrator and InDesign but it is still an issue. Should I uninstall the whole suite and just start over? Thanks a lot.

I was having this same issue. I had also installed some fonts, after which Illustrator froze while "installing fonts," so I removed the fonts, but it didn't solve the problem. Illustrator continued to freeze on start up, albeit, now during "initializing."
The solution that worked for me ended up being very simple: hold down the Command-Option-Shift keys while starting Illustrator. Apparently it resets the applications preferences.
Hope this works for you too!

MacPro 3 OS 10.5.8 freezing at start up

I just installed Photoshop CS5 and during an Adobe aided install of some missing plugins, the support person had me restart my computer. My Mac Pro which has never given me a lick of trouble froze during start up. I ended up rebooting after several tries unplugging and retrying a normal start, I eventually held down the option command P R while rebooting. It did start up but is exhibiting odd behaviors. It froze while I tried to verify disk on my main HD. I decided to shut down and unplug all my peripherals and restart and had the same problem, a grey screen with a progress line at the bottom that freezes before start up. I had to reboot as described above. I am not sure if I should uninstall CS5 or look for a fix. The adobe support person dumped my call when I mentioned that my computer wouldn't restart. I am a photographer who loves using my Mac but knows little about how it really functions. I would appreciate any help you experts could provide.

peterite wrote:
I have an older copy of Disk Warrior that I bought to repair an external hard drive that I was having problems with.
Did that drive have 10.5 installed on it? What version number of DiskWarrior do you have?
Never realized I could use it sporadically with the Mac to detect problems.
Oh yes!
Would it matter that it is a couple of years old?
Yes it could, it has to be a Leopard compatible version. Is it DiskWarrior 4?
If you have that version, that it'll work on 10.5.8. If not, you'll need that DW4 upgrade at $49.95.
Later you can get a free update to DW 4.2 which will work on Snow Leopard.
I really appreciate your help.
No problem!
I take it you think it is a data problem and not a physical one with my system.
Probably. If you want to, try running your Apple Hardware Test . It's not perfect, but may flag something if it's hardware based.
I am looking at upgrading to OS 10.6. Any thoughts as to if it might improve the problems I am having with Photoshop. My last version was 32 bit, this one is 64.
Yes I believe Snow would work better for you, but to be sure ask that question in the Snow Leopard usage forum.
I am wondering if that can cause problems with start up or if I am dealing with some other type of issue.
Maybe, but I really don't know for sure. I don't run anything that needs 64 bit.
Dale

Z10 freezes during start up

My z10 freezes during start up. First I can see the red led on, then the BB logo and "blackberry" on the screen and it stays there forever.
I have tried to update the OS, using BB update software option, at which after resetting my Z10 the green led stays on, though I cannot update it, getting the error message "error downloading Blackberry Desktop Software".
Any ideas ? I need to recover information in the phone's internal memory.
Thank you !!!

So I did the Disc Utility, and the disc was sucessfully repaired. I restarted the iMac and got to exactly the same place as before: "Login window started" where it froze again. I turned it of, restarted in Safe Mode and it froze at the same spot.
Is the next step to try reinstalling the OSX? I didn't see an option to install in place ie leave all my files intact. There's an "Archive and install" option. Does this just archive the system folder and erase all my other files. I'm pretty much backed up but I'd much prefer not to erase the files if I can avoid it.
Thanks

Bootcamp windows7 freezing on start up and taking around 40 minutes to load. Mac mountain lion also taking around 5 minutes to load on start up

I would like to have your kind support..Bootcamp windows7 freezing on start up and taking around 40 minutes to load. Mac mountain lion also taking around 5 minutes to load on start up.

My first step would be to get rid of "Norton protection". Boot from your OS 10.6 disc, navigate through your hard drivve and trash anything that is Norton. Empty the trash.
Next, run Disk Utility and ask it to repair the hard drive.

Photoshop freezing at start up because of Kubota plugins (Mac OS)

My photoshop is freezing at start up. I have some kubota actions on my computer and this is what I get at the freezing piont. "starting-up plug-ins....kubota dashboard 3 palette..." I have restarted my computer and also closed it completely. This seems to help but not this time. Any suggestions as what I should do. Thanks. By the way this is my first time here so hello everyone!

Yes, there's just no way this is a coincidence...it has to be something going on within Kubota! I submitted a "head's up" as to what's going on via the contact form on Kubota's site. This thread was a HUGE relief to me as well. I've spent the last 24 hours freaking out. To top it off, Adobe CHARGES $40 to troubleshoot on past versions of Photoshop, which I find absurd. We pay crazy amounts of money for this program. I'm only running CS4! Geez! Granted, it looks like this is not an Adobe issue, but it involves their program. Wish they were a little more accomodating.
BUT...I did find a way to use photoshop instead of removing the dashboard altogether...a workaround is to start your computer in "safe mode" (my computers are Mac's, so I'm not sure if there in an option for PC). When I did that, Photoshop pulled right up. And I WAS able to use the dashboard. Of course, this can only be a temporary fix, but at least it allows you to edit if necessary. Hopefully this will give a clue to Kubota as to what's going on.
Guess we'll see! But, yes, HAPPY NEW YEAR to all!

CDE FREEZES ON START UP

Similar Messages

Maybe you are looking for