CDF @JExportTo does not work in EAS Business Rules

Hello,
I have registered the custom defined function in 11.1.1.3 and it is registered properly in the application (log). @JExportTo works fine in a calc script but if I try to use the same code (without any variables in the first place of course) in an EAS Business Rule (not Calc Manager), HBR does not recognize it as a function and gives me code validation errors.
Any help is very much appreciated!
Many thanks,
Michael

renatew,
did you try using "To or Cc" instead of the localized version? I think that Mail uses the actual header names for those rules, the localized names in the standard selection or UI-only.
Andreas

Similar Messages

EPrint does not work with Google Apps for Business (hosted email)

I have looked up numerous posts, from back into 2011 even, and HP still has not resolved this.
HP's ePrint does not work with companies using Google Apps for Business (hosted email).
Our emails come from our domain, but from the servers/DNS of Google, so we wind up getting
the "550 5.7.1 Command Rehected" error.
This is a major issue as more and more companies (especially small business owners) are moving away
from having in-house/Exchange servers, and they are moving toward hosted systems.
You really need to find a way to stop rejecting emails coming from Google Apps hosted email.
It's been around 4 years now (looking at previous posts). Why hasn't HP found a resolution to this yet?

I have brought your issue to the attention of an appropriate team within HP.
They will likely request information from you in order to look up your case details or product serial number.
Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Updating extended fields in SRM Business Partner Web Dynpro UI does not work

Hey community,
I'd like to extend the SAP SRM Business Partner Web Dynpro (SRM 7.13). I did it like in SAP Note 1386310 described. Everything works fine, the fields show the correct data. But updating these fields does not have any effect.
I only want to extend the existent fields NAME_ORG3 and NAME_ORG4. I did the following steps:
- Because of the fact that the fields are existent and not custom, I skipped the extension of structures INCL_EEW_BUT000 and INCL_EEW_BUT000_X (ok, in utter despair I even tried this, but of course I got the message "fields already exist...")
- I added the 2 fields to the SRM business partner data transfer structure INCL_EEW_BP_CSF_COMPANY_DATA.
- In Web Dynpro /SAPSRM/WDC_MODC_NAME, view V_PS_OIF_NAME I added the fields NAME_ORG3 and NAME_ORG4 to the context node COMPANY_DATA
- I added corresponding Input fields and labels to the WD layout.
- in view /sapsrm/v_mdfsbc I customized the new fields
-> the new fields are visible in the WD, and, oh wow, they even show the correct data!
-> Unfortunately, updating the fields does not work, but000 does not get any data.
Debugging the function "bupa_central_extincl_change" brings up, that function BUP_MEMORY_BUT000_GET gets a but000 structure with filled NAME_ORG1 and NAME_ORG2, but NAME_ORG3 and NAME_ORG4 are empty.
I also regarded SAP Note 1453747, but the code was already right.
Any Ideas? Many thanks in advance!
Steffi

Hi Stefanie Krause,
I am also facing the same problem
I added the one fields "APPROVAL_EMAIL” to the SRM business partner, data transfer structure '/SAPSRM/S_CLL_BP_COMPANY_DATA ' . I have appended the structure.
I added corresponding Input fields and labels to the WD layout.
-> the new fields are visible in the WD,
-> i am able to visible the input field in WD,
But if add some value press on next tab and back to the screen the value will be refreshed .
Kindly help me
Thanks and Regards,
Maruthi.M

Use member on data form does not work

Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
Thanks

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

FLASH PLAYER 10.3.183.7 DOES NOT WORK IN FULLSCREEN

FAO: Mr CHRIS CAMPBELL
Hello Chris
You're probably getting this from all angles but the newest update to Flash Player (10.3.183.7)   JUST DOES NOT WORK PROPERLY.
I keep my browsers up to date and as of today (5 Sept 2011) Flash WORKS in "small pane in browser" mode (for example, in Youtube) BUT GOES BLANK AS SOON AS FULLSCREENED.
Note that overlay captions and the pause / play graphics DO all work - it is only the video decompression that doesn't - leave screen blank and black.
This is BOTH in FireFox 7.0 and in latest Google Chrome: I have carefully uninstalled & replaced Flash form the links you posted here and IT STILL DOES NOT WORK in fullscreen.
You really should NOT release new version of auto-updating code like this that are not properly tested: this has mucked up video viewing for millions of people needlessly.
Is it because of the new accelerator support ?   who knows.    This is a mid-life Toshiba Satellite Pro   (we don't all go out and buy new PCs every ten weeks like you developers do) and it has a P4 and standard onboard Intel 82852 graphics: perfectly fine up to last week.     But it has 64MB of graphics space and I see that 10.3.183.7 now "requires"   128MB ?       You just cannot make assumptions like that : I bet there are 50 million plus PCs out there with 64MB (or less) VGA RAM.
Adobe is a lovely product, but this is a complete and utter bal*ls-up as we in the UK call it:      please excuse my anglo-saxon directness.    Sort it out, please.
Mike, London, exasperated

Hi Chris
Thanks for your rapid feedback.
YES - you are right - turning off hardware accelerate FIXES it on this machine.
(For anyone else trying this, note that if your PC is busy you may not be able to get the Right-click menu to work while the video is displaying, so PAUSE it first, then right click in the pane,   choose "Settings", and UNtick the hardware acceleration tickbox. Then unpause, and bob's your uncle.)
Interesting: Chris - I also notice that   Not All Videos Do it     - some are fine (adverts seem to be, on youtube) - but this (below) is an example of the one which will not fullscreen with the HW acceleration on (nice watching, too :-)
http://www.youtube.com/watch?v=lb3VWZj_I6g&list=PL0F01AFE18471E7B8&index=1
NB Might it have anything to do with the transcoding YouTube are supposedly doing, over to VP8 ?     I wonder if they change the content of the stream, when you choose fullscreen perhaps ?   And so perhaps confusing the HW accelerator which may not know VP8 ?
Thanks again for rapid response.   GOOD LUCK ALL
Mike H
London

CMC does not work after deploying to Websphere

Description of Problem or Question:
We have an installation of BO XI R2 SP2 on Tomcat (default installation).
Now we installed Websphere Application Server 6.0 on the same server and deployed BO war files on it.
The existing installation of Infoview & CMC on Tomcat works as it did before.
But, CMC that runs on Websphere does not work.
Product\Version\Service Pack\Fixpack (if applicable):
Business Objects XI R2 - Service Pack 2
Tomcat 5.0.27 (installed by default)
Websphere Application Server 6.0.0.2
Relevant Environment Information (OS & version, java or .net & version, DB & version):
Windows 2003 Server R2, Enterprise Edition, SP2
Sporadic or Consistent (if applicable):
Consistent
Steps to Reproduce (if applicable):
Followed all the steps mentioned in "Deploying on WebSphere" section of "xir2_bip_install_en.pdf"
Deployed the following war files from the following location in the order mentioned with context roots as listed.
C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\java\applications\sp2updates
webcompadapterSP2.war /businessobjects
jsfadminSp2.war /jsfadmin
jsfplatform.war /jsfplatform
adminSP2.war /businessobjects/enterprise115/adminlaunch
desktopSP2.war /businessobjects/enterprise115/desktoplaunch
stylesSP2.war /styles
http://localhost:9080/businessobjects/enterprise115/desktoplaunch
Infoview works as expected.
http://localhost:9080/businessobjects/enterprise115/admin
CMC doesnot work. IE Says "HTTP 500 Internal Server Error".
What has already been tried (where have you searched for a solution to your question/problem):
On searching the web-forums, I found this:
http://www.forumtopics.com/busobj/viewtopic.php?t=112151
So, I tried to install WCA for Websphere. The scenario mentioned in that article deals with new installation of BO.
But, since ours is an existing installation, I cannot install WCA for websphere.
I do not want to re-install BO.
Please advise.
Thanks,
Chris

Hi,
The following is the log created when I try to open CMC.
com.ibm.ws.webcontainer.webapp.WebApp logServletError SRVE0293E: [Servlet Error]-[wccontroller]: java.lang.NoClassDefFoundError: javax.servlet.http.HttpServletRequestWrapper
at com.ibm.oti.vm.VM.findClassOrNull(Native Method)
at com.ibm.oti.vm.BootstrapClassLoader.loadClass(BootstrapClassLoader.java:62)
at java.lang.ClassLoader.loadClass(ClassLoader.java:633)
at java.lang.ClassLoader.loadClass(ClassLoader.java:635)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:300)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:363)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:347)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
at java.lang.ClassLoader.loadClass(ClassLoader.java:635)
at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:90)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:466)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:466)
at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
at java.lang.J9VMInternals.verifyImpl(Native Method)
at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at com.businessobjects.enterprise.wca.servlets.WCAControllerServlet.init(Unknown Source)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:325)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.init(ServletWrapperImpl.java:165)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:628)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:443)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:175)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3610)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:274)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:926)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1557)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:173)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:455)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:384)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:272)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:202)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:766)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:896)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1527)

Configuration Template Builder WL8.1 does not work

Hello,
     After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
     I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
Thanks

Russ,
     Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
     JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
     I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
     Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
     By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
     The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
     From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
     The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
     BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
     If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
     As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
     I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ

I'M AN AMERICAN ON TEMPORARY ASSIGNMENT IN ITALY AND CANNOT GET TO ANY HELP SOURCE ONLINE OR BY THE PHONE NUMBERS LISTED ONLINE. I'M TRYING TO RENEW MY ONE TO ONE SUPPORT PROGRAM AND THE "RENEW NOW" LINK DOES NOT WORK! HELP!

APPLE SENT ME AN E-MAIL WITH A LINK TO RENEW MY ONE TO ONE SUPPORT. THE LINK DOES NOT WORK. AFTER I LOG INTO MY APPLE ACCOUNT AND CLICK "RENEW NOW" FOR ONE TO ONE, AN ERROR MESSAGE APPEARS SAYING "PAGE NOT FOUND". AMAZING. WHEN I TRY TO CALL THE TOLL FREE APPLE SUPPORT NUMBER FROM MILAN, ITALY WHERE I AM NOW LIVING, IT DOESN'T WORK. THE ITALIAN SUPPORT DESK APPEARS TO BE AVAILABLE ONLY ON WEEKDAYS DURING NORMAL BUSINESS HOURS. HOW CAN I REACH A LIVE APPLE SUPPORT PERSON?

Start by going here - https://expresslane.apple.com/GetproductgroupList.action?locale=it_IT
Best of luck.

Bluetooth on iPhone 6 does not work with car stereo

I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
1) Incoming calls show my own telephone number, regardless of who calls
2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
Hopefully this is soon to be solved! Or is there already a solution out there?
Best regards
Matt, Denmark

My iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install on a Business standard radio set up with e snap in connector for the iPhone
but not yet an iPhone 6 snap in
You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also plays audio
The issue is usually with iDrive which BMW do have some issues with

Location switching does not work on Vista

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

Hi, my location switching does not work. I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot next to the profile indicate it picked up the right wireless signal) but never connect to the profile
Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
My Config is
- R61
- Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
- OS Vista 32 Business - with up to date patches
- Access Connection 4.42 for Vista Build 7RCN38WW
Thank you in advance for pointers

Reminders App does not work on Yosemite with two iCloud accounts.

The Reminders App does not work on Yosemite (10.10.1) with two iCloud accounts. It seems like when there are two iCloud accounts connected in Yosemite (10.10.1) the plist file for Reminders disappears.
I have tried restarting Reminders; restarting the mac; starting the mac in recovery mode to repair the disk and disk permissions; and starting the mac in recovery mode and reinstalling OSX.

Yes sharing Reminders list works. The problem is, I have one shared iCloud account with a colleague (shared calendar, Reminders and email). It makes it easier to run our business with a single shared iCloud account...I know it's not the typical usage.

Want to set mailto for google apps;tried editing the gecko...mailto.2.uritemplate as per instructions found on web; set 3 related config values to "true" as per instructions; does not work; tried javascript method without success

I want to set the mailto app for google apps gmail.
I tried editing the gecko...mailto.2.uritemplate as per instructions found on web (https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s.
Set 3 related config values to "true" as per instructions (network.protocol-handler.expose.mailto ; network.protocol-handler.warn-external.mailto ; AND, third, gecko.handlerService.allowRegisterFromDifferentHost.
Does not work, no Google Apps in the mailto app spot.
Tried javascript method in address bar without success:
javascript:window.navigator.registerProtocolHandler("mailto","https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s","Google Apps GMail")
Any light anyone can shed will be appreciated. Cheers, jlf

Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
Some remarks:
[*]Select New Business Components...
This should be 'New Business Components Package', or you won't be able to add business components.
ename as "Name",
sal as "Salary"
from emp
where empno = ?That should be deptno.
[*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
Greetings,
Ivo

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Publishing a flash with AS3.0 on website does not work

Okay, I'm finally at the end of my flash card. Here's the whole code.
//import classes
import com.greensock.TweenLite;
import com.greensock.easing.*;
import fl.transitions.Tween;
import fl.transitions.easing.*;
//end of importing
//start of sound section is for sound
var cssLoader:URLLoader;
var css:StyleSheet;
var soundReq:URLRequest=new URLRequest("audioFiles/PaukenBrumfiel_AngelsOnHigh.mp3");
var sound:Sound = new Sound();
sound.load(soundReq);
sound.addEventListener(Event.COMPLETE, onComplete);
//end of sound section
//Loading external texts
var weiss:Font = new Weiss();
var weissBold:Font = new WeissBolder18();
var weissBolder:Font = new WeissBolder();
var slideXTween:Tween;
var txtAlphaTween:Tween;
var txtNextText:Tween;
var txtContainer:Sprite;
var txtField:TextField = new TextField();
var myTxtField:TextField = new TextField();
var txtFldwebImages:TextField = new TextField();
var textRequest:URLRequest=new URLRequest("happyHoliday.txt");
var textLoad:URLLoader = new URLLoader();
var txtFormat:TextFormat = new TextFormat();
var myLinkFormat:TextFormat = new TextFormat();
var strLink:String;
var numXPos:Number;
var numYPos:Number;
//end of loading external texts
function onComplete(event:Event):void {
    sound.play();
function textReady(event:Event):void {
    //txtFormat.font= weiss.fontName;
    txtFormat.color=0x000066;
    txtFormat.size=24;
    //txtField.x = stage.stageWidth;
    //txtField.width = 800;
    txtField.autoSize=TextFieldAutoSize.LEFT;
    //txtField.height = txtField.autoSize
    txtField.wordWrap=false;
    txtField.text=event.target.data;
    txtField.setTextFormat(txtFormat);
    //txtField.y = 350;
    txtField.embedFonts=true;
textLoad.load(textRequest);
txtFormat.font= weiss.fontName;
textLoad.addEventListener(Event.COMPLETE, textReady);
txtField.x=stage.stageWidth;
addChild(txtField);
txtField.y=350;
TweenLite.to(txtField, 40, {x:-stage.stageWidth*2.25, ease:Linear.easeNone, delay:0.5, onComplete:Inspiration});
function Inspiration():void {
    txtFormat.font= weissBolder.fontName;
    textLoad.load(new URLRequest("inspiration.txt"));
    txtField.x=130;
    txtField.y=330;
    txtField.alpha=0;
    TweenLite.to(txtField, 5, {alpha:1, onComplete:GoogleFunc});
function GoogleFunc():void {
    //create and initialize css
    addChild(myTxtField);
    strLink = "<a href='http://www.google.com/' target='_blank'>Google</a>";
    numXPos = 180;
    numYPos = 370;
    var myCSS:StyleSheet = new StyleSheet();
    myCSS.setStyle("a:link", {color:'#000066',textDecoration:'none'});
    myCSS.setStyle("a:hover", {color:'#FF6600',textDecoration:'underline'});
    txtFormat.font = weissBold.fontName;
    //txtFormat.color=0x000066;
    txtFormat.size=20;
    //txtFormat.bold = true;
    myTxtField.setTextFormat(txtFormat);
    myTxtField.defaultTextFormat=txtFormat;
    myTxtField.styleSheet = myCSS; // Linking CSS to TextField
    myTxtField.htmlText="";
    myTxtField.htmlText=strLink;
    myTxtField.wordWrap=false;
    //myTxtField.embedFonts = true;
    myTxtField.width = strLink.length*2;
    myTxtField.x=numXPos;
    myTxtField.y=numYPos;
    //trace("Third txtField.y: " + txtField.y);
    myTxtField.alpha=0;
    TweenLite.to(myTxtField, 1, {alpha:1, onComplete:webImages});
    //trace("tween done");
function webImages():void {
    addChild(txtFldwebImages);
    var myCSS:StyleSheet = new StyleSheet();
    myCSS.setStyle("a:link", {fontsize:'20',color:'#000066',textDecoration:'none'});
    myCSS.setStyle("a:hover", {fontsize:'20',color:'#FF6600',textDecoration:'underline'});
    txtFormat.font = weissBold.fontName;
    //txtFormat.color=0x000066;
    txtFormat.size=20;
    //txtFormat.bold = true;
    txtFldwebImages.setTextFormat(txtFormat);
    txtFldwebImages.defaultTextFormat=txtFormat;
    txtFldwebImages.styleSheet = myCSS; // Linking CSS to TextField
    txtFldwebImages.htmlText = "";
    txtFldwebImages.htmlText="<a href='http://www.google.com/webImages/' target='_blank'>Google Images</a>";
    txtFldwebImages.wordWrap=false;
    //myTxtField.embedFonts = true;
    txtFldwebImages.width = 300;
    txtFldwebImages.x=300;
    txtFldwebImages.y=370;
    txtFldwebImages.alpha=0;
    TweenLite.to(txtFldwebImages, 1, {alpha:1});
//end of loading external texts
Okay, the problem is when I publish the .swf files and put it in an html or .aspx page, it does not work. The audio is not there and a few others things ar enot working. However, it does work if I click on the.html file that Flash created during the publication.
Here are the folder structions:
www.mysite.com/myFlashPage.aspx
www.mysite.com/flashFileFolder/
www.mysite.com/flashFileFolder/audioFiles/
So, the myFlashPage.aspx containsthe myFlash.swf file that is inside the flashFileFolder. For some reason, it does not work. Any suggestion is much appreciated.

The .html file does work if I publish it into the same folder as I created the Flash project. However, when I publish the
flash .swf to my web site folder (mapped), it's no longer working. The mapped web site drive structher are as follows:
D:\Mysite\ contains the .html file
D:\Mysite\flashFileFolder\ contains the .swf file
D:\Mysite\flashFileFolder\audioFiles contains the PaukenBrumfiel_AngelsOnHigh.mp3 file
D:\Mysite\flashFileFolder\greensock-tweening-platform-as3 contains all the tweenlite files
The .html file does not work either. What else do I need to change?

Firefox worked on my laptop in UK, but here in USA, it does not work on my Brighthouse Wireless Network, but Internet explorer does. What setting do I ned to change?

As above, I have also tried downloading a later version, also tried downloading Google Chrome, none work. I have tried using my laptop at several different wifi connections in USA and Firefox does not work on any. So it is not a wifi set up problem in our home in USA. I am running X.P and I.E 6. When I downloaded I.E 8 that would not work either, so I had to re set the laptop back to a date a week ago.
Unable to access certain bank sites with I.E 6, that is why I use Firefox. Any suggestions appreciated.
This is the message I get
"Unable to connect
Firefox can't establish a connection to the server at webmail.apscontrol.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

CDF @JExportTo does not work in EAS Business Rules

Similar Messages

Maybe you are looking for