Cdp aging time
Hi all,
I was wondering if anyone know what the default CDP aging time is?
David
Hi ,
show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Dan
Similar Messages
-
Printer aging-time "best practice"
Hi,
Our new printers are loosing their ip address'es after some time with no use...
I guess that they are not sending any frames onto the port, and the aging-time on the vlan is kicking in.
And when reading this forum a few suggestions comes up.
Changing aging-time on vlan for printers. (are there any known caveats changing this?)
Static mac address settings on port (we have ~500 printers, so that feels somewhat funky)
How do you guys handle this?
This is a normal port config for our printer ports on a 2960 tc-l 12.2(58)SE1.
interface FastEthernet0/21
description printerVlan
switchport access vlan 3
switchport mode access
switchport nonegotiate
switchport block multicast
switchport block unicast
switchport voice vlan 2
switchport port-security maximum 3
switchport port-security
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
switchport port-security aging static
srr-queue bandwidth share 10 10 60 20
priority-queue out
mls qos trust cos
storm-control broadcast level 10.00
auto qos voip trust
no cdp enable
spanning-tree portfast
spanning-tree bpdufilter enable
All ideas are welcome.
Regards FalkIf you create a new ASO (remember, this does not work in BSO) database, right click in the outline (okay, the completely blank outline).
You should see a pop up menu with "Create date-time dimension..."
I should also note that you have to click on the word "Outline: dbname" to do this.
I wonder if you are trying to do this in a BSO app as that will make the menu item show up unselected.
Regards,
Cameron Lackpour -
How to add an "age / time counter" into DW?
Can anyone assist on how to add an age / time counter into DW?
In other words to say "Child X is now a years, b months old"? or "Product Z was launched A years B months ago"? Or, on the other hand, "You only have Z days & Y minutes left to enter"? With it updating in real time?
Apologies in advance if this is a silly / obvious question but I just can't seem to do it!This isn't something you would add to DW, you would need to add it to your webpages. You would do this with javascript. Search the web for
'javascript countdown timer' for plenty of examples. -
Hi,
I would like to ask What is Aging Time and its purpose.
Thanks,
DyepFor the original poster, although Giuseppe provides an excellent description of the MAC aging timer in reference to CAMs, and since you mark his post as resolving your question, I just want to re-emphise in reference to your original question there are multiple aging timers, a couple besides ARP's and CAM's. The principle is generally the same, and such timers might be adjusted for various reasons. (For example, setting ARP and CAM aging timers can make or break unicast flooding.)
[edit]
I wrote too soon, see you've marked my original post as also resolving your question. BTW: The interplay between ARP and MAC aging timer, and how it can cause unicast flooding, I think, is worth knowing. You might want to read http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801d0808.shtml -
Why can't modify the vlan aging time
4506-1#sh mac add aging-time
Vlan Aging Time Configured Aging Time
Global Vlan Admin Age: 300
1 300 300
100 300 300
300 300 300
500 300 300
501 300 300
502 300 300
503 300 300
600 15 300
I don't do any aging time Settings, why aging time is 15? I don't have change to take effect.Duplicate post of Why cisco WS-C4506-E Switches High CPU?
-
How Cisco represent Arp entry's aging time in SNMP MIB
Hi there,
I found : when a laptop roamed between an office and a meeting room and used two different IP addressed in these two places, there are two active IP arp entry in Cisco with different aging time.
Please see the screenshot for "sh ip arp". My question is how Cisco represent the aging time in SNMP MIB. Is there any cisco proprieatry MIB to represent the aging. I want find the latest arp entry from SNMP. I can't see any useful field in ipNetToMediaEntry, ipNetToPhysicalEntry and cInetNetToMediaEntry.
Not sure if cInetNetToMediaLastUpdated is related, but I have never get any snmpwalk result from this oid yet.
LiamThis value is not available via SNMP.
This information comes via IP-MIB and the IP-MIB's ipNetToMedia table will just give you the hardware address, network address, associated interface, and entry type (e.g. static, dynamic, etc.).
-Thanks
Vinod -
3850 Port-Securty Aging-Time Issue
Hello,
we have configured Port-Security on the Cisco Catalyst 3850 Switches on all "access ports" like this:
interface GigabitEthernet1/0/1
switchport mode trunk
switchport nonegotiate
switchport port-security
switchport port-security maximum 50
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
I connect my PC to a mini switche and connect this to the first 3850. Everything is working.
Then I connect my PC to the second 3850 -> there is no connection. This is ok because of the aging time of 2 Minutes.
Then I connect my PC to the third 3850 behind a telephone everything is working.
After 5 to 10 Minutes I type "show mac address-table address x.x.x" on switch 1 and 3.
Switch1#sh mac address-table address ecf4.bb01.078b
Mac Address Table
Vlan Mac Address Type Ports
2201 ecf4.bb01.078b STATIC Gi3/0/31
Total Mac Addresses for this criterion: 1
Switch3#sh mac address-table address ecf4.bb01.078b
Mac Address Table
Vlan Mac Address Type Ports
2201 ecf4.bb01.078b STATIC Gi6/0/24
Total Mac Addresses for this criterion: 1
My MAC-Address isn't aging out. And this means I can't connect to any other Port.
After clearing port-security "clear port-security dynamic addressecf4.bb01.078b" everything is fine.Thanks for your reply.
Why shouldn't it work? If I disconnect my PC I have no activity so my mac address should age out.
So if I want to plug it in to another port after the aging time of 2 Minutes my MAC-Address will be learned and I have network connectivity. That's the plan... otherwise I will be locked out. -
Arp aging time on router and mac address aging time on switches set close t
Hi,
appreciate some advice on the following:
what is the benefit of setting arp aging time on router and mac address aging time on switches close to each other?
Thanks,
ChristinaHi,
based on the below output, do you think implementing it will benefit? Thanks.
C2950#sh int fa0/43
FastEthernet0/43 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 000d.5e11.4e2b (bia 000d.5e11.4e2b)
MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,
reliability 255/255, txload 7/255, rxload 2/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 933000 bits/sec, 149 packets/sec
5 minute output rate 2981000 bits/sec, 263 packets/sec
2819781393 packets input, 3782332886 bytes, 0 no buffer
Received 266693 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
4015025747 packets output, 2328228393 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
C2950# -
Hi there,
Just wondering why, when i do show arp, in my WS-C4506, whith Supervisor II+ 1000BaseX, and cat4000-i9k91s-mz.122-25.EWA5.bin, it seems that i have +/- 20 % of arp entrys with the aging time of 0 sec all the time.
I think it should increment that aging time till 300 sec (by default), and then reset, but not all the entries do it.
Any ideias of what kind of "process" is causing it ?
I have all in the vlan1, and the ip's that soffer this issue are hosts and Cisco equipments.
Thank you in advance.
Petr?nioFriend,
I think you are a little confused with the ARP aging time and the mac-address aging time (also called as CAM table)
The default ARP aging time is 4 hours but the switch hold the CAM table entires only for 5 minutes.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00807347ab.shtml#troubleshoot
A permanent ARP entry does not have any timer assoiciated with it and is not shown as "0" but as "-".
The thing which you are seeing is basically the cam is being aged out after 5 mins from the switch and is not incrementing as no frames are being received on the port.
HTH, rate if it does
Narayan -
Hallo
We are experiencing a strange behavior in our LAN, the MAC- Addresses of the Workstations that are connected to LAn but not generating traffic are being deleted from the Mac- Address-Table after 10s although the aging - Time is set to 300 s.
Does anybody have an Idea Why.
Thanks
AliHello,
No it is not, the Network where this problem noticed is more complex and it is a topology where the three layers exists ( Core,distribution and access), the problem where noticed on access switches have redundant links. portfast is being used on ports connected to workstation. It so the the the switch loses the mac-addresses of the stations that are directly connected to it after approx.
15 sec.
Thanks -
CAM aging time VS Port-security aging time
Hi All
Please advise on the following:
- Without port-security configured, MACs per interface are learnt as "Dynamic" entries and the global CAM aging timer applies (300 seconds) unless tweaked manually.
- With switchport port-security enabled (without port-security mac-address sticky, which holds onto MACs infinitely) I see MACs being learnt as "Secure-Dynamic" in a show port-security interface gix/x output and as "Static" in the output of show mac address-table interface gix.x .
What I want to know is if JUST port-security is applied (without mac-address sticky) do the default CAM aging timer of 300 seconds get applied to these MACs too? as I see their is also a option to configure port-security mac-address aging time / type, does this overrule / take precedence over the default CAM aging timer?
Please assist, its not documented anywhere and its driving me a bit nuts!
Thanks folksWhat I want to know is if JUST port-security is applied (without mac-address sticky) do the default CAM aging timer of 300 seconds get applied to these MACs too?
Any aging time you configure with port security will take precedence over the default aging time.
See this thread for details -
https://supportforums.cisco.com/discussion/11054341/switchport-port-security-commands-help
Jon -
Any ideas on how to AUTO resize/crop/perspective etc two (or more) portraits, according to one common item? (lets say for example eyewear, or the eyes, or any other object that could use as a guide item)
The purpose is to create an aging time-lapse.
Well the same technique could be used for every time-lapse i guess
Thanks in advance!Well PS almost does this kind of operations with photomerge.
I suspect identifying elements in two images taken less than a second apart from roughly the same position and aligning them is considerably »easier« than identifying and aligning functional anatomical units in images taken at vastly different times and possibly even different lighting consitions.
One might be able to semi-automate the task, I guess.
One could for example manually declare the reference points (as PathPoints for example) and then automate the aligning – still seems pretty difficult to me, though. -
Eviction of objects based on aging time and not cache size
Hi
Ii am using a coherence cluster ( extend) and wish to implement an aviction policy for each object inserted into the cache.
From the docs i have read i understand customized eviction policies are ALL size based and not time based ( mean eviction is triggered when cache is full and not when cache object aging time reached ).
It there a way to implement such eviction ?Hi Reem,
You can expire cache entries based on time by setting the expiry-delay in the cache configuration, for example
<distributed-scheme>
<scheme-name>SampleMemoryExpirationScheme</scheme-name>
<backing-map-scheme>
<local-scheme>
<expiry-delay>10s</expiry-delay>
</local-scheme>
</backing-map-scheme>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
<autostart>true</autostart>
</distributed-scheme>The above configuration expires entries 10 seconds after they have been put into the cache.
You can find more information here: http://download.oracle.com/docs/cd/E14526_01/coh.350/e14509/appcacheelements.htm#BABDHGHJ
Regards,
JK -
Hi,
i'm trying to change mac-address timers but having problems, i.e the change Im trying to change mac-address-aging timers but having problems, i.e. the change only applies to existing active vlans. if i add new vlan after changing mac-address-aging timer it will have default value 300. Is this way it works or Im missing something?
3750-sw-1(config)#mac-ad aging-time 1300
3750-sw-1#sh mac-ad ag
Vlan Aging Time
10 1300
20 1300
30 1300
3750-sw-1#! Now adding a new vlan
3750-sw-1#conf t
3750-sw-1(config)#vlan 40
3750-sw-1 (config-vlan
3750-sw-1#sh mac-ad ag
Vlan Aging Time
10 1300
20 1300
30 1300
40 300
New vlan 40 has default value????Just checked the command reference. In the usage guidelines it states:
Usage Guidelines
If hosts do not send continuously, increase the aging time to record the dynamic entries for a longer time. Increasing the time can reduce the possibility of flooding when the hosts send again.
If you do not specify a specific VLAN, this command sets the aging time for all VLANs.
The last sentence is relevant to your question. The command may also be issued on a particular vlan.
New vlans are created after setting this parameter globally will hence be using the default values.
The key issue to check if this is a bug or not is to check whether the global command is reflected in the config. If it was, I would call the issue a bug.
As it is not, you must approach this as a parameter that can (and should) be set per vlan. After creating a new vlan, you may add this line in the script or re-issue the global command.
Regards,
Leo -
Curing (Ageing) time for material
Hi there ,
I got a requirement in which the material have differrent curing (Ageing) time.
Now after the Usage decision is given for the material .......the stock should move to the unrestricted after the curing time .........
how can we map the same in SAP for differrent material .......
Regards
KaushikHi,
Curing time is process related WAIT time.
In the workcenter used for the inspection task list, enter the wait time.
Regards,
Senthilkumar
Maybe you are looking for
-
Static Interface Methods in ABAP
Hello, I'd like to know what sense it makes to define static methods in an interface. My understanding is, that an interface can only be used with an instance of a class implementing that interface. So I always need to have an instance and thus, stat
-
HT201328 iphone 5 sim card problems
hi im from ireland, i bought a used iphone 5 and it accepts o2 and vodafone sim cards so i know its unlocked, but when i stick in a sim card from the network im with i get this message: the sim card that you currently have installed in this iphone is
-
User status for production order
From which table i can get the USER STATUS for a production order?
-
So I have this problem, I made a drawing with my tablet in 32bit color in photoshop and I want to save it as a TIFF file, but when I save it the image that is the tiff file is black and white and the cuality is not good.I think there is some kind of
-
Page Number Problem in Converted Word Document
I opened a .docx file in Pages '09 and all seemed well. When I printed out a draft, I noticed that the second digit of my page numbers had but cut off. The page numbers appear just to the right of the edge of the header, yet are not part of the norma