CDP location and CRL of Root CA is not available
HI,
We had one Root CA and its no more avilable due to storage format. RootCA has one subordinate CA server and that server is fine.
When veirfy CDP container via PKIVIEW.msc I can see that CRL of Subordinate CA is valid and Root CA is expired an year ago ( with this I assume its offline root standalone CA).
When I verify CRL of Subordinate CA server it something like below
URL=ldap:///CN=netca1(2),CN=netCA1,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=contosso,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
URL=http://netra1/CertEnroll/netca1(2)DeltaCRLAllowed%3E.crl
When I validate URL path the CRL is expired.
Certificate of subordinate ca still shows valid.. How do I find valid CRL for crashed root CA?
(please excuse Typos)
Mahi
No, that's not what I mean.
If the root CA server is gone and the root CA CRL is expired, then your PKI is lost.
One way is to add the Enterprise PKI mmc snap-in to an MMC and see what the dates are there. You should be able to see when it expires.
Another is to open the physical file, depending on how the PKI is implemented it may be available where you point your http CRL.
Hth, Anders Janson Enfo Zipper
Similar Messages
-
Siri can not find my location and all the other apps do not even
siri can not find my location and all the other apps do not even
iPad 3 IOS 6.0.1Do you have a wifi signal? In order for the wifi only iPad to get any location fix, it needs to be connected to a wifi node - it's only way to determine locations is by looking up the wifi networks hardware address in Apple's wifi node location database of approximate locations (as mentioned already, it has no GPS chipset to use GPS location data).
-
Playbook and Windows XP : Media Options are not available
Hi, hoping someone can help me as two lengthy calls to RIM have yielded no results.
I am running Windows XP SP3 with spec well above the min requirements for Blackberry desktop software, of which I downloaded the latest version from RIM's site today.
Software recognises the PB and connects fine (displays PIN etc) yet I get two different errors:
1) Device Options > Media
"Media options are not available". A problem occured while attempting to connect to your Blackberry device
2) File > Get Started (dragging and dropping files)
"Media services are not available". A problem occured while attempting to connect to your Blackberry device
I've redownloaded the BDM software twice (both options for PC > and Sync >) with no result. I've tried different USB ports (same wire) and the same problem.
I notice when right clicking on the Device Manager > Properties that I see under Volumes "Internal Storage Not Mounted" which I doubt is helping.
Playbook Storage and Sharing Options have fiel sharing turned on, and UBS connections = Auto Detect (tried "Connect to Windows") and no result.
Any ideas?I may have a workaround for all you fellow sufferers.
In your playbook tap the information icon (uppermost right corner). Tap about and where it says view information about your tablet tap the down arrow and select network. There you will find one or two IPV4 addresses one for usb the other for wifi.
In Windows (7 don't know about XP or Vista click on start and in the search bar type the following
run \\either IPV4 address.
With any luck, Windows explorer will pop up giving you access to your playbook for file transfers.
Once you have done that, and if you prefer a two panel file manager as I do for file transfers, download and install a program called FreeCommander. This program will allow you to access a network drive from somewhere in its top menu (can't recall where at the moment and I'm not in Windows). Up will pop a screen asking you for a drive letter to be assigned (take your pick) and a location. In this area type \\either IPV4 url\media. You should now be able to access this drive from FreeCommander and easily transfer files to and from your playbook and computer.
Don't guarantee that this will work for you but it has for me.
Allan -
after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steveSee this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it. -
I seem to have lost most of my 9000 photos when I upgraded to Yosemite 10.10.3. iPhoto won't work now and says it needs an upgrade not available in the UK. Only a few of the 9000 photos appear on Photos! HELP?
Move the incompatible iPhoto version to the Trash, before you try to reinstall from the AppStore, but don't empty the Trash.
update as described here:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore Purchases tab with ⌘R, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it. -
cannot install itunes 7 because os 10.6.8 is needed. I select software update and the 10.6.8 is not available to be downloaded. I'm trying to load itunes to the iphone5
If you're using a PowerPC Mac, you can't.
If you're using an Intel Mac, phone the online Apple Store and order a Mac OS X 10.6 DVD.
If you don't know, choose About this Mac from the Apple menu.
(70291) -
I have never seen this before when I try to copy and paste, I get a
"Copy/cut/ paste is not available in Mozilla and firefox. Do you want more information about this issue? "
I have copied and pasted hundreds of times before with Mozilla and firefox . This just happened suddenly.
when I go to find more information on this issue, it give a long drawn out explanation I cant follow.
What happened?When you right-click the link, the page immediately tells you you can't copy, or does that occur after you choose Copy Link Location?
If it appears immediately, you can switch a setting in Firefox that should prevent sites from blocking the normal right-click menu. Here's how you would do that:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''context''' and pause while the list is filtered
(3) Double-click the '''dom.event.contextmenu.enabled''' preference to switch it from true to false.
This setting does have a complication: On Google Maps and other sites that have their own right-click menu, Firefox's menu then will block the site's menu. To clear Firefox's menu so you can access the site's menu tap either the Alt key or Esc key once (but sometimes Esc removes both). -
"New root object" menu not available
I'm using SJS Directory Server 5.2patch3 on Solaris 9, installed silently through state file and all seems to work fine (even if I don't understand why I have to repeat the installation more than one time since the first one doesn't create the proper directory structure inside the installation directory).
Through the Server Console, I created then a new subfix (o=people,dc=my) with its individual database under the userRoot (dc=my) and now I'm trying to create a new root object under the configuration panel (o=people which would reference to the dedicated database created in the previous step). That menu option is not available, which appears a bit strange since I'm logged in as cn=Directory Manager, which should have the proper rights to complete this operation.
The only solution would be to initialize the database through an LDIF file but I don't have a clue about all the attributes I should assign to that organization, acis ecc. It would be simpler to use the console; at least, I'm curious WHY the console doesn't allow to accomplish that step.
Any help greatly appreciated.
Many thanks,
FabioThe "New Root Object" task only appears if you created a new suffix.
Have you done a right-click on the server or on the "dc=my" entry?
Tested this for you some minutes ago with DS5.2Patch3 on Solaris9/SPARC and it worked out fine. -
Hello all!
I need urgent help!!
I'm trying to start Oracle 8.1.6 i on Solaris 8. But there are lot of error:
1. During initialising the database with dbassist, the error Code Error Codes: ORA 01034-"ORACLE not available" and ORA-01012-"not logged on" were shown.
2. I'm trying to start Oracle 8i on Sun Solaris 8 by typing svrmgrl-connect interal-startup. But the following was shown on by screen:
passau% svrmgrl
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> startup
LRM-00109: could not open parameter file '?/dbs/[email protected]'
ORA-01078: failure in processing system parameters
Please help me!!
My e-mail Adress: [email protected]I am pretty sure this has to do with the SGA..
what you may have to do is adjust you
system file
Here the values for /etc/system file: for more info look under
Oracle specific parameters (documetation) set shmsys:shminfo_shmmax=122496729 set semsys:seminfo_semmap=150 set semsys:seminfo_semopm=100 set semsys:seminfo_semvmx=12767 set semsys:seminfo_semmni=200 set semsys:seminfo_semmns=200 set semsys:seminfo_semmsl=200 set semsys:seminfo_semmnu=200 set semsys:seminfo_semume=100 set shmsys:shminfo_shmmin=100 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=100
good luck
[email protected]
null -
Widgets and features in Sony Xperia phones not available in Sony Ericsson Xperia Phones
HI All,
I am using the Sony Ericsson Xperia Neo V and my friend is using the Sony Xperia Sola.
Widgets and features that are available in Sony Xperia phones are not available in Sony Ericsson Xperia Phones even after upgrading my phone to android ICS.
Can any one please tell me, Why this difference.
Or
Is their any way to get those features ,easy shortcuts to some frequently used settings and nice widgets
Finally. If these are not available for sony ericsson mobiles . Please do give us those features as an separate update.
Thanks
Lokesh.Hello lokeshkumarn
You are right, unfortunately some apps are made available only for certain models, also some carriers may request some apps to be included or be left out of their custom firmware.
Most of the additional widgets and apps are available in the Play store for you to download.
Francis. -
My iMac = Desktop 20", 2GHz processor, 4 GB memory, running OS 10.10.1
I am tring to upgrade my iPhoto and when I follow Apple's instructions on how to do so, the download seems to occur, I click on the upgrade package and nothing changes.
I have restarted the computer after the download and still no change.
What am I missing?leonie,
Thanks for the reply, I finally got it solved. I had to find the upgrade in the Utilities folder of the Finder... -
Hi,
I am using visual studio 2013. After running a load test on my application, I need to view the "90% Page Time", "95% Page Time" and "99% Page Time" percentile data in tabular results view. But since I have started
using visual studio 2013, these columns appear blank after load test execution is completed. Is there a specific configuration change is required to view data from these columns ?
Please refer attached screen shot -
Help much appreciated.
Thanks,
Rahul S.Hi Rahul S,
To collect the data, in the Load Test Editor, under the Run Settings node, select the run setting node to change. In the
Properties window, for the Timing Details Storage property, select
All Individual Details.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi there. I have the ipad 3, and just last night had to reboot and do the upgrade, now my texting and facetime on it is not working...it states that when I click to activate it, and put in my user id(email) and passcode....that" could not sign in...please chekc network connection and try again".....well my Wifi connection is fine, and i can text and facetime fine from my iphone..just not the ipad now.....any ideas why it will not take my user id and passcode?...the passcode works fine on my iphone.
Hello cohenj80,
Thank you for the details about the FaceTime and iMessage activation issue you are experiencing on your iPad 3. I recommend following the steps in this article when you are not able to sign into FaceTime or iMessage on your iPad:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Best,
Sheila M. -
Premiere and AE for CC (non 2014) NOT available
The older versions of Premiere Pro CC (v7.0) and After Effects (v12.0) no longer appear as downloadable apps in the Creative Cloud portal. Will these be added back to the list of downloadable apps so that users can self-install non-2014 CC apps as needed?
[edited by VeloPro August 26]Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous
-
black macbook - 2 ghz intel core 2 duo, 2gb (667 mhz) sdram
Model Name:
MacBook
Model Identifier:
MacBook2,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
667 MHz
Boot ROM Version:
MB21.00A5.B07
SMC Version (system):
1.13f3
Serial Number (system):
4H*****WGM
Hardware UUID:
Sudden Motion Sensor:
State:
Enabled
<Edited by Host>It is not that you are not worthy rather it is your Macbook2,1 that is incapable of handling Mavericks. The latest OS that your Macbook will support is Lion (OS X 10.7.x). The oldest Macbook that can handle Mavericks is Macbook5,1 (Aluminum Late 2008). Apple has for many years maintained a 7 year support window before a computer is declared obsolete and no longer supported. This is the seventh year in the Macbook2,1 lifecycle.
Maybe you are looking for
-
Error connecting using RemoteObject
I've developed a simple flex app for listing data in a grid, which works just fine locally when the remoteobject call is made to the cfc. However, once the file was moved to a testing server, I receive the following error when the object call fires o
-
Moving outlook contacts to address book???
Hi, Can someone please explain to me, step by step, how to move my outlook contacts to address book? The instructions found in this article: http://docs.info.apple.com/article.html?artnum=304721 don't work at all. I have downloaded the app from littl
-
Read PO delivery schedule data
Hi SAPPERS, Is there any FM or table, were I can find delivery schedule data from purchase order-? thanks for your help Saso
-
Applet that saves images in server
Hi. I want to know if is possible that an simple drawing applet saves the image as png, gif or any that was draw in the applet. If so what clases i have to look.
-
Tablespace Fragmentation. specially in SYSTEM tablesapce.
Hi, I am working on Oracle 11gR2 DB and AIX OS. An database is having many tablespaces which are allocated to specific schemas. These schemas are functional from a long time. Data comes and goes all the time. The size of the tablespace has gone very