CDR billing for Transfer, conference and forwarding

Hi,
We found some difficulties when trying to link several CDRs within a conference or transfer. The doc says they should have the same call leg, while from the actual CDR files from customers, we find the call legs are all different through out one single conference.
How should we deal with this?

Hi Gabriel,
Thank you for you answear.
The DOC that you sent to me is about CDR for CUCM version 7.0.1 and my version is CUCM 6.1.4, I don't know if there are diferences between them.
I've opened a case with TAC to try solve or find a solution for this "issue".
Follow the TAC's position:
Hi Evandro,
As per your conversation with David, there is no report that Call Manager generates that will let you see who transfer and where were those calls transferred to, neither who created/participated in conferences and how long would those conferences lasted. However you can pull that information from Call Manager with a billing server. Attached you will find the link that talks about the supported billing servers that Cisco recommends to use
http://forums.cisco.com/eforum/servlet/IPCApps?page=Call_Acct_Billing.
Note: As stated in the document you provided each time that a call is transferred, the Cisco Unified Communications Manager terminates the CDR for that call and initiates a new CDR. For conferences the number of CDRs that are generated depends on the number of parties in the conference. One CDR exists for each party in the conference, one CDR for the original placed call, and one CDR for each setup call that is used to join other parties to the conference, please remember that Call Manager assign a conference ID when they are created so you do best effort following it.
Hope this information helps.
Thanks in advance,

Similar Messages

HT4914 I was billed for iTunes Match and I was not aware and would like to cancel it and get a refund for it. I don't store my music in iCloud and still have 4.5 gig of my 5 gig free. Please advise

I was billed for iTunes Match and I was not aware and would like to cancel it and get a refund for it. I don't store my music in iCloud and still have 4.5 gig of my 5 gig free. Please advise

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to contact the iTunes Store and make your request.
Regards.

Now that iPad has multitasking gestures, why don't they just add a gesture for going back and forward in safari?

Now that iPad has multitasking gestures, why don't they just add a gesture for going back and forward in safari? Just like in a mac, with the multitouch gestures. The osx Lion got the launchpad idea from the ios, so why don't the ios gets something from osx?

Send them feedback and make the suggesion. We're just fellow users here, we have zero control over anything Apple does.
http://www.apple.com/feedback/

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

There are severall units out there with 4 ink cartridges, not sure about the option to revesre image in the printer, however mirroring an image is possible in most software programs. Even in paint i think.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Am running Firefox 8.0.1 on a MacBook Pro running OS 10.5.8. The URL bar at the top of the page has disappeared and is inaceesible along with the arrows for navigating backwatd and forward. Please help.

Unable to scroll to top of page, as scroll tools are not active upon opening Firefox or a new browser window since this problem occurred. Home/startup page is set to Google Advanced Search. Would prefer not to have to re-install Firefox, if possible, as I have a lot of important data in Zotero and Bookmarks that I do not want to jeopardize.
Thank you for your help.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

HT1515 Is there a monthly bill for airport express and extreme?

I am thinking about buying a airport express but would ike to know if I will have to pay a monthly bill for it or not

Well, in order to use the devices for internet access, you need an ISP (internet service provider) - either cable, DSL or whatever is available in your area. That provider is going to charge a fee for internet access. Other than that, no there is no inherent fee in using the equipment (eg. as long as you do not need internet connectivity, and just wanted an in-home wireless connection between your own devices, you could use them entirely for free, other then the electricity used to power them).

Right combination needed for transfer method and TTy

Hi,
I have a scenario to map for transfers (affiliated co),
Company code A - apc 1000; nbv 200; accum 800; new value 250;
In company code A
cr apc 1000
dr clrg 250
dr accum 800
cr interco gain 50
In receiving company code B
dr apc 1000
dr asset 50
cr contra 800
cr clg 250
I am unable to do this with transfer method 3, which is new value method. I tried creating new trnsfr variants and TTys but unable to get the above postings.
Please suggest suitable combination of trnsf methods and TTys asap!!!
Thanks
Edited by: rick dermont on May 9, 2008 6:05 PM

Hi,
>Can someone tell me why my post doesn't show up as I typed it? All of the carriage returns were removed so that its one big >paragraph (that is impossible to read).
Because your post is too long.
Because the performance of the java forum software is very bad, the forum admins had to disable the paragraph formatting of "long" messages to keep "acceptable" response times.
This is such a good advertising for Jive software and the j2ee engine...
Olivier

Using a proxy for http requests and forward

Hi. My company won't allow access to mail.yahoo.com and www.hotmail.com. However, I can get to my own web server on my Cable Modem at home. Can I use the proxy to accept the http connections and forward them to hotmail ...will this work? If not any other solutions?

Yes, that would work if you configure it as a reverse proxy.
IMHO proxy would be overhead for this. There's many freeware out this which is exactly designed for that, see
http://freshmeat.net/search/?q=http+tunnel&section=projects&Go.x=0&Go.y=0

The browswer bar (for website url) and forward and backward arrows are not there on my firefox page and other webpages? What is the problem and how to resolve it, can anyone help?

I am using desktop and Window XP.

see [http://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing Back and forward or other toolbar items are missing]
[http://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_showing-the-navigation-toolbar Showing the Navigation Toolbar]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Service billing for the material and service registers

Dear All,
I have doubt, if i do a sale of material 'X' and for the same material if i have to do a service invoice for rendering some service at the customer end. eg:- service charges for transportaion of the material to the customer place, doing installation charges for the material at the customer end etc.,
how should i go about it in SD .
A. Should i have to create a seperate mm master record for the list of service with the item category group LEIS
B. or is it possible to do a service invoice with out creating a sales order i.e directly based on the billing of the material 'x'
C. Is there any service tax register standard available. or if i wanted to create a service master should i have to ask the abaper to develop a z program for it
d. is this tcode can be used S_ALR_87012357 for service tax registers?
kindly update me on this
thanking you in advance
kumi

Hi
You need to create a material with item category group
a) LEIS (Service without Delivery) or
b) DIEN (Service with Delivery)
Based on the same you could bill the customer.
... Please.
with kind regards
Sundar

Order related billing for partial payment and inconsistent amounts

Hi,
We are using billing plans with payment cards to capture payments before goods are delivered. SAP doesn't seem to support credit cards for down payments, so we are entering the payment in the payment card and billing plan lines, then generating the F1 order-related billing.
Sometimes, the dollar amount is prorated proportionately, sometimes, it is disproportionately. For example, if we have 5 line items for $100, $200, $300, $400, $500 a total net value of $1500, and the customer makes a credit card payment of $500, we are seeing that sometimes this explodes to $33, 66, 99, 122, 155. Sometimes, it explodes to $0, $0, $0, $0, $500 in the billing document.
Where does SAP control the way the amounts are derived in the billing document? This is milestone billing.
Ideally, we would like this evenly applied across all conditions. I really need to understand how SAP handles this. The configuration indicates that the pricing is copied straight from the order. I don't see anything custom in the document copy procedure here.
I have had a difficult time finding anything in forums or on the internet in general, I've tried search terms such as "order related billing amount distribution" and "payment card amount allocation" as well as a few other terms but haven't found anything helpful.
Thanks for any suggestions you may have.

Hi,
Have you check in copy control order to invoice
At item level Pricing type it should be - G
Kapil

I've lost my drop down menu for my back and forward buttons. I use them constantly. How do I add this or is that option gone for good?

There used to be a drop down menu along side the forward and back buttons so you could skip several pages in between. I couldn't find that as an option to customize that feature back is that option no longer available?

Hi Emclatchy,
In Firefox 4 you should be able to get the history drop-down menu by left-clicking on the back button or the forward button and holding the mouse button down for a few seconds.
Or, you can try installing this add-on:
https://addons.mozilla.org/en-us/firefox/addon/backforedrop/
I haven't tried it myself but it is supposed to add the history drop-down indicator back to Firefox 4, same as it was in previous versions.
Hope that helps,
--Jono Xia, Mozilla

CAR/ART Billing for Off-Net and On-Net Calls

Is there any possibility of differentiating between On-Net and Off-Net calls once the Rating engine has been configured?
Within the CAR Dial-Plan the following destination patterns are configured 2XXX, 3XXX and classified as On-Net.
The problem is that when you run a detailed report, calls between 2XXX and 3XXX display billing amounts, when only Off-Net calls are required for billing.

Could be a codec issue. Verify what codec you are trying to use when the call fails.
Is this H323 or MGCP, what is the PSTN connectivity, SIP or PRI or FX0?
Might be helpful to post the router config.

I am being billed for premium messaging and I've never used it.

I received my verizon bill last month. Noted I was charged $19.98 for premium messaging under Data. This showed up on my statement for my one phone - 989-600-7940. I've never used premium messaging for data on any of my phones. I want my bill adjusted.

vtx1800sba wrote:
I received my verizon bill last month. Noted I was charged $19.98 for premium messaging under Data. This showed up on my statement for my one phone. I've never used premium messaging for data on any of my phones. I want my bill adjusted.
Welcome to the community, vtx1800sba!
Thank you for making us aware of potential billing errors. Please be cautious about posting your cell phone number here or anywhere online. (To protect yourself and the billing on your account).
Let me add to what the community posted by explaining that a premium SMS is a premium message service above the standard texting on your plan. It allows special daily/weekly/monthly services, whether it be horoscopes, ringtones, jokes-of-the-day, reality television voting, etc.
If this issue has not already been addressed please PM me your name and contact number so I can help in resolving this issue.
Thank you again!

Billed for transfer to new address but three month...

After three months and continuous calls to BT they have just sent an engineer who agrees there is no connection nor is one possible with the current cabling situation. BUT bt took £130 from my account and the first quarters rental. Now I have to try and get repaid.

Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

CDR billing for Transfer, conference and forwarding

Similar Messages

Maybe you are looking for