CDR by Outbound Dialed Number

Hello,
Is it possible to run a report on an outbound dialed number? I have been tasked to find how many times a number has been called. I normally did this with query analyzer with an if statement in older versions of CM but this is on UCM 8.
Any help is greatly appreciated. 
Thank you to all in advance.

What version are you on?
Mine shows "By User/Phone Number/SIP URL" for the first option.
You can try using the "By User Extension" option but it may not work.
You can use the CDR->Export CDR function to just export that date range to an Excel sheet and do your filtering there.
The SQL queries would be another option as well.
Brian

Similar Messages

  • CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

    Hi there,
    I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
    https://supportforums.cisco.com/thread/2031366
    Thanks in advance for any help.
    Carlos A Trivino
    [email protected]

    Hello Dale,
    CVP doesn't allow you to exceed the RNA more than 60  Seconds. If you want to configure the timer for DN Patterns you should  do it via OPS console, It would update the sip.properties files in  correct way, the above way is incorrect.
    Regards,
    Senthil

  • UCCE 10.X Outbound Dialer

    Hi,
    Is it possible to configure the outbound dialer so that when we have a list of customers from a different countries, the outbound dialer selects an Agents who has a skill for that specific country for language purpose?
    Thanks,
    Nizar

    You can create multiple Import rule, query rule and campaign to achieve this.
    lets say that you want english speaking customer to talk to english speaking agent.
    The English speaking Agents are under skill group say English_SG.
    now you can try this steps to achieve the scenario.
    1) create a dialing list by gathering all english speaking customer in to single list.
    2) create import rule and map this list to import rule.
    3) create query rule, and above created import rule to query rule.
    4) create a campaign sy English_CMP and assign above created Query rule.
    5) in the same campaign configuration in skill group selection tab, assign English_SG(english speaking agents) and in the Dialed Number box create a dial number which will be used by MR PG to reserve the agents.
    6) for the same dialer number, schedule a reservation script and select LAA from English_SG
    thats is you are done at this point.
    same thing you can try for other languages, by creating different campaign and query as well as import rule.
    i hope you have got the basic concept on how this can be achieved.
    Regards
    Chintan

  • How to look for sales order number if I know outbound delivery number?

    How to look for sales order number if I know outbound delivery number?

    Hi ,
        If you want to see the Sales order Number from Outbound delivery or invoice,go to their respective T-codes,say for example,
    for delivery,Goto Tcode: VL02N / VL03N.There you will find Document Flow Icon,click on that,or press F7.
    You will get a window,there you can see the Sales order Number before your outbound delivery Number
    With Thanks and Regards,
    Priya

  • Agent desktop changing dial number as entered

    In the agent desktop there is a checkbox, "dial number as entered" that I want to be checked when the application is started. How do I do this?

    3 years later I'm running UCCX 8.5(1)SU2 with CAD 8.5.1.214 and have the same issue. Did you ever get a solution or workaround?
    Without putting a checkmark in "Dial Number as Entered"  I enter a 5-digit extension I get in bottom left corner "Call Failed: Invalid Destination", if I put the checkmark in I can 5 digit dial.

  • How to turn of the sound of the keyboard while dialing number on my Iphone5 ??

    How to turn of the sound of the keyboard while dialing number on my Iphone5 ??

    Setting-keyboard clicks-off --> just turn off keyboard sound while you write a message!!
    If I put my phone on mute I will not hear when somebody will calls me,or I must everytime before dialing a number put my phone on mute and after back turn in ON! apple apple apple ... one of the expensive mobiles these days,but not finalized !
    P.S. sorry for my english

  • UCCX 7 outbound dialing, problem with area codes

    Hello all,
    I'm just testing the outbound dialing feature in a lab, and have run into the following problem:
    I have following:
    outbound configuration:
    general:
    Customer dialing time: start (9:00) end (21:00)
    dialing prefix - 9
    international prefix - 00
    Local Area Code: 44
    Area Codes:
    44 -> Europe/London
    34 -> Europe/Madrid
    86 -> GMT-10 (for testing purposes, does not correspond to real China time).
    Then, I upload a .CSV file into a campaign with the following information:
    Jane,Smith,00447111113007
    Jacky,Chan,0086611115002
    Juan,Pablo,0034611114001
    The dialing works, the agent receives the call, accepts it, and then the call is made.
    if anyone is interested, although it has nothing to do with the question itself, the calls are translated to other extension on CUCM to be able to make a call.
    The problem is that, they are all treated as in the same AREA CODE, although I have clearly defined area codes for each of those countries.
    when the call appears it shows on the CAD as BAAreaCode: +00060
    Therefore the calls are made through to China even when it's midnight there!!!???
    I know I must be doing something wrong, but I don't know what?
    Many thanks for your help,
    Cheers,

    Hi Aaron,
    Sorry for being so late to answer you. But I've done quite a few tests last weekend and have couple traces as well.
    Apparently, the first time I added area codes, I did something incorrect, although I do not know what exactly, because now I've added area codes and it partially worked.
    Area code: 4420 - Europe/London with Daylight saving
    Area code: 3498 - Europe/Madrid with Daylight saving
    Area code: 8661 - GMT/+7 NO Daylight saving
    The first two Area codes (Spain and London) were correctly identified, In traces I could even see:
    this one is for Spain:
    type=com.cisco.executor.QueuedExecutor,Thread=MIVR_CFG_MGR_INVOKE_NOTIFICATION-33-189,Thread priority=7,Original Thread=null,Original thread priority=5,Time=null,Exception=null 358035:
    Jul 03 10:56:40.390 BST %MIVR-CFG_MGR-7-UNK:configStubImpl-replace() notified with DialingListConfig,time=2010-07-03 10:56:40.373,recordId=0,impl=class com.cisco.crs.outbound.DialingListConfig,desc=,key[137],columns[137,1,,Jacky,Chan,0086611115002,,,377,0,424,1,424,1,,1278150825843,6,0,0,0,0,0,0,0,0] 358036:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 358037:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:138 358038:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0034981114001 0034981114001 358039:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 358040:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:numToDial=0034981114001 0034981114001 358041:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:138 358042:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Europe/Madrid",offset=3600000,dstSavings=3600000,useDaylight=true,transitions=165,lastRule=java.util.SimpleTimeZone[id=Europe/Madrid,offset=3600000,dstSavings=3600000,useDaylight=true,startYear=0,startMode=2,startMonth=2,startDay=-1,startDayOfWeek=1,startTime=3600000,startTimeMode=2,endMode=2,endMonth=9,endDay=-1,endDayOfWeek=1,endTime=3600000,endTimeMode=2]] 358043:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=true 358044:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=716 globalStartTime=480 globalEndTime=1410 358045:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 358046:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: no more in-memory contacts left for campaignID 1 358047:
    As we can see, localTimeMins is 716 which is: 11:56AM.  That was correct time, and in between min/max globalstart times.
    And this one is for London:
    getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 276065:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:130 276066:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=00442081114002 276067:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 276068:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:numToDial=00442081114002 276069:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:130 276070:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Europe/London",offset=0,dstSavings=3600000,useDaylight=true,transitions=242,lastRule=java.util.SimpleTimeZone[id=Europe/London,offset=0,dstSavings=3600000,useDaylight=true,startYear=0,startMode=2,startMonth=2,startDay=-1,startDayOfWeek=1,startTime=3600000,startTimeMode=2,endMode=2,endMonth=9,endDay=-1,endDayOfWeek=1,endTime=3600000,endTimeMode=2]] 276071:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=true 276072:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=627 globalStartTime=480 globalEndTime=1410 276073:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 276074:
    As we see, localTimeMins is 627 which is: 10:27AM which is correctly between min/max globalstart times too.
    But the problem started with GMT+7.
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: for campaignID=1 280255:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: campaignID=1;#of DLC=2 280256:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 280257:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:131 280258:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0086611115002 280259:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 280260:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:numToDial=0086611115002 280261:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:131 280262:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Etc/GMT+7",offset=-25200000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null] 280263:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=false 280264:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=148 globalStartTime=480 globalEndTime=1410 280265:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=false 280266:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: cannot dial at this time, will be marked RETRY
    It correctly identifies Etc/GMT+7 but then it calculates the localtime wrongly... It came up with 148 which is 2:28AM... and the time I was making a call GMT+0 time was around 9:28AM so GMT+7 should've been 4:28PM...
    Then I tried GMT-7 too:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: for campaignID=1 433346:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: campaignID=1;#of DLC=2 433347:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 433348:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:140 433349:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0086611115002 433350:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 433351:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:numToDial=0086611115002 433352:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:140 433353:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:OutboundContactInfo:isRequestingContacts() for CSQ 2 returns true 433354:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:OutboundContactInfo:setNrGetContactsReqSent() for CSQ 2 to 1 433355:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:OutboundContactsRequestor before sleep 433356:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:Dialer:printLicenses() working_resources for CSQ:2 is 0 433357:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:Dialer:printLicenses() total_working_resources:0, OB_contacts_in_progress:0 433358:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Etc/GMT-7",offset=25200000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null] 433359:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=false 433360:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=1045 globalStartTime=480 globalEndTime=1410 433361:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 433362:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: remaining # of in-memory contacts for campaignID 1:1 433363:
    and this time it did all the way around, instead of early morning, it was 1045: 5:25PM...
    I do not understand what am I doing bad... but I'm starting to think it's some kind of a bug...
    and the other problem is: outbound dialer does not even take contacts out of the campaign for calling if the server's local time is not between global start time and global end time. which should not be the case, as I understand campaign times should be applied to area code local time not to server local time.
    Many thanks to all,
    Cheers,
    George

  • ICM 7.5-how to get individual outbound dialer calls talktime and respective ECC values

    Hello,
    I'm looking for following two items
    1. Outbound dialer calls talktime in each call.
    2. Each calls respective ECC values.
    I have tried to get talktime from TCD table it’s shows zero value.
    Please advice how to get above values, it would be much appreciated.
    Thanks
    Regards,
    Param

    Hey Param,
    You can use the PeripheralCallType in the TCD table to find dialer calls. Look for calls with:
    PeripheralCallType IN ('27','28','29','30','31') for reservation calls and
    PeripheralCallType IN ('32','33','34','35') for the customer calls
    For duration of reservation calls look at the HoldTime value
    For duration of the customer call you can look at the HoldTime + TalkTime + WorkTime for a total handle time for the customer leg of the dialer call
    If you want to look at the ECC variables that were associated with that call you will have to lookup the Termination_Call_Variable table matching:
    Termination_Call_Variable.TCDRecoveryKey = Termination_Call_Detail.RecoveryKey
    Cheers,
    Nathan

  • UCCX Multiple Phones Agent Predictive Outbound Dialer

    Under UCCX 10.5, does the Agent Predictive Outbound Dialer dials multiple phones per record in case of no answer, busy, etc?

    MR PIM unable to reserve agent.
    Can you check if you have label assigned for MR PIM on the Agent's Device Target?
    Do you see the Routing Script gets executed?
    "Router Log viewer" will be next thing to monitor when you try to run the Agent based campaign
    Thanks
    - abu

  • For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue.

    For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue. Waiting for your reply.

    Hi sb00349044,
    I'm sorry to hear that you are having problems with your Firefox OS device. Can you please specify the device Model and Version?
    If your device is one of the Firefox OS Tablets from the contribution program, please be aware that those builds are still being improved and ironed out. If that is the case, please follow the guidelines for the contributor program to report issues with the device.
    Thanks,
    - Ralph

  • UCM Routing Client doesn't appear when configuring a Dialed Number in Configuration manager

    Dear all,
    I am implementing a UCCE system version 9.0
    When I am trying to configure a Dialed Number in Configuration Manager, the Routing Client field is empty, it doesn't show the UCM option.
    Kindly can someone help me on this issue, what should I check? is there something missing in the configuration?...
    Any help would be greatly appreciated.
    Thank you in advance.
    Lara

    ICM Config Manager > Tools > Explorer Tools > PG Explorer
    Do you see a PG and PG Peripheral for UCM? If so, select the Peripheral and go to the Routing Client tab. I've attached a picture of what a healthy functioning PG and PG Peripheral would look like from the Routing Client perspective. 

  • Dialing number+number

    Hi,
    What is the meaning of '+' sign in the middle/end of a dial string? What should Dialing number+number do?
    for example 0541112233+03443355 and then dial
    I have nokia 3100
    tnx,
    Ohad

    It looks like it does the following:
    - It calls to the number before the '+' sign.
    - When the call is connected, the phone considers the number after the '+' as speed dial short key, and searches if there is a number assign to it.
    - If speed dial exists it sends the speed dial number as DTMF
    For example: send 12345+4
    - Call 12345
    - If the '4' key is assigned to speed dial, lets say '987', it sends '987' as DTMF to the other side.
    Never saw such complex behavior !!

  • How to find Outbound Idoc number from inbound Idoc number.

    Hi,
    I have one inbound Idoc in my system, then
    How to find the  idoc number from the system which sends that idoc(Outbound Idoc number).

    Hello
    You can use fm SREL_GET_NEXT_NEIGHBORS for this purpose.
    Scenario: An EDI purchase order is received by SAP-XI and forwarded as Inbound ORDERS IDoc to R/3. SAP-XI generates an (outbound) IDoc number which differs from the (inbound) ORDERS05 IDoc in the R/3 system.
    Calling fm SREL_GET_NEXT_NEIGHBORS with the following parameters:
    OBJECT-OBJKEY = <IDoc number, 16-digits>
    OBJECT-OBJTYPE = 'IDOC'
    MAX_HOPS = '99'            " <<< get all links
    I get the following result:
    0000000000133906                                   IDOC       CUSTOMER   OUTIDOC
    0000000000407402                                   IDOC                  INIDOC
    000000370383                                       BUS2012    CUSTOMER   OUTBELEG
    0010057944                                         BUS2032               INBELEG
    Outbound IDoc number
    Inbound IDoc number (ORDERS05)
    PO number
    Sales order (created from inbound ORDERS IDoc)
    Regards
      Uwe

  • Outbound IDOC number

    Hi All,
    How to find Outbound IDOC number from receiving system?
    I want to know  number assigned to IDOC in sending system from target system.
    Regards,
    Rahul

    hi,
    you want to see the idoc number use <b>WE02 Transaction or WE05</b>Transaction.
    <b>or</b>
    using <b>WE20 </b>   we can get Outbound IDOC number from receaving system.
    Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing
    <b>Check the Below link..You can get ALE/EDI and IDocs book online for free...</b>
    http://idocs.de
    Go thru the book "ALE,EDI and IDoc Technologies for SAP" By Arvind Nagpal..
    follow this link...
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/ale,IDOC&
    regards,
    Ashokreddy

  • How to get dialed number

    Hi all,
    l am writing a trusted application using ucma. My application creates user endpoints and starting register for incoming calls. However l want to get dialed number of a lync hard phone.(polycom)
    my questions:
     1. is it possible to get call information ?
     2. is there a possibility to register / subscribe for call/conversation?
    Thanks
    Christian

    Rather than using a UCMA application and the overhead of creating endpoints, you should write and MSPL application that will run on your front end(s).  It can look at the INVITES coming through the system and parse out the dialed number.
    You don't say what you want to do with the information, but if you want to use it externally to the MSPL script, you can call out to a managed code app installed on the front end and do whatever you want with the information there.
    Oscar Newkerk
    Oscarnew Consulting

Maybe you are looking for

  • How to replace the LabView logo at the top left corner of running VI windows

    Hi All I need to replace the Labview logo (at the top left corner of the windows) when my VI is running. Same thing applies for any of the pop up windows I have in my program.  I have a .jpg file of the logo I would like to replace the Labview logo w

  • Why wont my ipad 2 play movies

    i have knowhow cloud backup and share and all my movies which are MP4 are on there. however, whether im using the app or going online i cant stream and watch the videos, there is just a black screen. this has happened on some other videos on other we

  • Defaulting Jurisdiction code in FB60

    HI ppl, Can anyone suggest me how to default Jurisdiction code in FB60 screen? I have tried SHD0, but it is not allowing me to make any changes until I create a vendor. I don't want to create a vendor in my Golden Client. Is there any alternative way

  • Adobe Customization Wizard XI (Windows) - Availability

    Hi Is there any indication on the anticipated release of the Adobe Customization Wizard XI (Windows).  It says (forthcoming) on the FTP site: ftp://ftp.adobe.com/pub/adobe/acrobat/win/11.x/11.0.00/misc/ Regards,

  • Response time difference

    Hello: I did 2 experiments with oracle 10g on AMD 64 bit windows 2003 server. expt 1: Post 10000 records, read records from 1 to 10000 in batch of 100 and note the average time . Now with 10000 records already in the database, post another 10000 reco