CDR in the context of Forecast and forecast version

Can someone please help me understand the term "CDR" in the context of forecast and forecast version? What is the expansion of the term CDR?
Thanks
Kunal.
Edited by: Kunal. on Feb 23, 2012 2:06 PM
Edited by: Kunal. on Feb 23, 2012 2:09 PM

No idea of what is CDR ... We have CDP which means characteristic dependent planning.
Maybe CDR is also characterisict dependent somthing? (Just a guess ...)
What's the context do you find this term?

Similar Messages

  • SharePoint Navigation Error:The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)

    Hi,
    I take a exeption  on the  SharePoint 2013 left navigation. 
    Exeption:  "The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)"
    I searched  this exeption keyword on the internet and  I find usualy 3 results
    1)check datetime servers --> I checked datetime for all SP Severs ,DB server and AD server ..there is  no problem
    2)Disabled the WebPageSecurity Validation on CA>General Settings-->I tired  and problem not solved
    3) Reset IIS --> if I restart IIS problem solved  but  after 2-3 hours or anytime  error comes again..
    ULS Log:
    PortalSiteMapProvider was unable to fetch children for node
     at URL: /MySite/MySubSite, message: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317), stack trace:   
     at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)    
     at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
    ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
    lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)    
     at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout,
    Boolean bAsAnonymous)    
     at Microsoft.SharePoint.SPWeb.InitializeSPRequest()    
     at Microsoft.SharePoint.SPWeb.EnsureSPRequest()    
     at Microsoft.SharePoint.SPWeb.get_Request()    
     at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings..ctor(SPSite site)    
     at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings.GetSiteNavigationSettings(SPSite site)    
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)    
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedHiddenTypes)    
     at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetChildNodes(PortalSiteMapNode node, NodeTypes includedHiddenTypes)
    Plaase Help.

    Hi Veli,
    Please check the security token timeout value and it is set to 1440 as expected by default. You can check via running the command:
    stsadm -o getproperty -pn token-timeout
    Then check the OOB recycle times of the probkematic web application pool, and add daily recycle times for the problematic web application pool. You can do as the article:
    http://technet.microsoft.com/en-us/library/cc754494(v=WS.10).aspx
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • The context has expired and can no longer be used. (Exception from HRESULT: 0×80090317)

    I have followed the instructions on this blog. http://blog.cloudshare.com/2012/10/22/how-to-fix-sharepoint-2013-web-application-error-the-context-has-expired-and-can-no-longer-be-used/ and
    it fixes the problem for a short time.  I have to keep doing IISResets to get my farm backup.  
    Please Help.

    Have you trid Ajay Khanna's suggestion from the comments field?
    From Central Admin- Select the web application and Select --> Web Application General Settings --> Navigate to 'Web page Security validation', change or disable the timeout field.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • The context has expired and can no longer be used

    I am running across a repeatable error when accessing a specific Site Collection. EVERY TIME the SC is loaded we receive the error 'The context has expired and can no longer be used'.
    I have already validated the SharePoint servers' time zones are all the same and match the web application(s), as well as set the 'Web
    page Security validation' to "Off".
    What else could I be missing? Could this have anything to do with Distributed Cache?
    - Rick

    Hi,
    We just began to have the same error. The servers are also correctly set for the timezone (UTC) as well as the Web Applications.
    The error happens for every site collections, there isn't a specific site where I'm able to reproduce the issue.
    This is the ULS :
    05/27/2014 12:59:05.98 w3wp.exe (0x1524) 0x0780 Web Content Management Publishing Cache ahh6l Verbose CreateListItemFromUrl : Parameters url : '/sitename/SitePages/Home.aspx', enableCheckedOutItem : 'True', checkedOutByCurrentUser 'False' retVal Id = '4618889e-0e1c-4503-a7fb-70fd36e2661d'. 01ff949c-98cc-d0fb-9795-c691c2852f54
    05/27/2014 12:59:05.98 w3wp.exe (0x1524) 0x0780 Web Content Management Publishing Cache ahh6l Verbose CreateListItemFromUrl : Parameters url : '/sitename/SitePages/Home.aspx', enableCheckedOutItem : 'True', checkedOutByCurrentUser 'False' retVal Id = '4618889e-0e1c-4503-a7fb-70fd36e2661d'. 01ff949c-98cc-d0fb-9795-c691c2852f54
    05/27/2014 12:59:06.00 w3wp.exe (0x1524) 0x0780 SharePoint Foundation Runtime tkau Unexpected System.Runtime.InteropServices.COMException: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317) at Microsoft.SharePoint.Library.SPRequestInternalClass.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) 01ff949c-98cc-d0fb-9795-c691c2852f54

  • The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)

    We have a problem with our wiki site collection. Once a day (and sometimes more), we get the following error message :
    The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)
    This message is displayed to everyone, and will stay there for an hour or so before the collection is back to life.
    Doing an iisreset would get the site working but that will last for a day at the most.
    This is what we checked and tried so far :
    1. Our time zones are set and are correct.
    2. Changing the timeout or disabling the web page security validation (followed by an iisreset) didn't work.
    3. All server use the same NTP server for time sync (and they are indeed in sync).
    4. It is happening only on the wiki collection, not the other collections.
    5. We are unable to reproduce the behavior on the staging servers.
    Some particularities :
    1. Regional settings are set to French (Canada)
    2. We have 500+ wiki pages in the site collection
    3. We require page check-out / check-in for editing. Tried without, same problem.
    Any ideas as to what should we try next ?
    Regards,
    homerggg

    Hi,
    I don't think we have changed them from the default, a quick look shows ours are set to:
    Token-timeout = 24hrs
    FormsTokenLifetime = 10hrs
    WindowsTokenLifetime = 10hrs
    LogonTokenCacheExpirationWindow = 10m
    Rob

  • The context has expired and can no longer be used errors making farm unusable

    There are a couple of other posts on this forum about the message "The context has expired and can no longer be used" but they all suggest something related to time and time zone differences. This is not the case in my farm and I have disabled
    the security checking of requests on my web applications. Hopefully someone at Microsoft is very aware of this and is working to resolve it because my farm and many others are unusable like this.
    I have dug through all of the ULS errors when it happens and there is nothing useful. It barely even registers as a message although, I have not turned on verbose logging, which I am about to try. I have SP 1 installed. Just to be clear, this is happening
    on SharePoint 2013 Enterprise.
    I have been fighting this for a month. I can add a few things about the farm I am trying to fix:
    1. It was a WSS 3.0 farm that when through a 2007-2010-2013 migration in short order. 
    2. I believe it is under-powered on the hardware side. All VMs on a host shared with 40 other VMs, some fairly busy. Here's the virtual farm breakdown:
      -1 WFE with 12GB RAM and 2 cores
      -3 app servers with similar resources
      -No paging file on C: on any VM. This is a decision by sysadmin. Paging on D: is system managed. Probably irrelevant.
    3. Rapidly clicking from link to link seems to bring on the failure much sooner.
    Any suggestions even about how to troubleshoot this would be appreciated.

    Ultimately, I think it is a time sync issue across the farm. We still have request management off on all boxes because I cannot get the admins to resolve this issue but, in my lab environment I ran into a similar thing.
    I may turn RM back on later to see if it comes back but here's what I think happens: In production we have 2 ESXi hosts and our SP environment is all AD (of course). The clocks are all out of sync, sometimes beyond 5 minutes. (The time sync for AD is something
    I believe a lot of admins don't understand when running virtual.)
    If you allow ESXi to try to sync the time for all guests you run into problems. Maybe they are more pronounced with SharePoint. Anyway, VMware and AD start fighting over the time (check your event logs) and, for us, the clocks across the domain get out of
    sync beyond the 5 minute allowable window.
    I recommend disabling time sync from host to guest and do what MS recommends: make your domain controller the master time server and configure it to get its time from a reliable source (which can be a single hardware host over NTP). Make other domain controllers
    sync from the PDC. The other windows machines will all sync to the domain when they log in. This will prevent SharePoint from issuing tokens from one machine that are out of sync time-wise with the other machines and thus throwing the "Context has expired
    and can no longer be used" errors.
    Note that disabling host to guest time sync is not as simple as just clearing / un-checking the box in the VSphere client. That doesn't do it. You will need to Google for the 6 or so custom properties you must add to each guest to prevent VMWare from re-synchronizing
    after certain hardware events.

  • The Context has expired and can no longer be used error

    Hello All,
    I am getting ‘The context has expired and can no longer be used.’ error.
    The last thing that was modified on the farm was Distributed Cache Service.
    We stopped it on the application server and only have it run on the two WFE’s servers.
    Also the cache size was changed to 2048MB.
    Is it possible that this change is causing the error?
    We don’t have ‘Default Time Zone’ selected for the web application.
    But we never saw this error till now.
    Any suggestions?
    Thank you,
    Zabcia

    Hi Zabcia,
    Thanks for posting this issue,
    following could be the reason of raising this issue
    1. Security context of your session might be expired
    2. Somebody/you might have change the data time of your server.
    you can follow below mentioned steps to fix this issue
    Just change/update the Date/Time in the SharePoint server
    Increase the Security context in SharePoint central admin. This can be done by following the below steps:
    Go to central admin 
    Go to "Application management section" Go to "Web Application General Settings" 
    Go to "Web page Security validation" section & increase the timeout field. Or, you can simply disable this option.
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • What is the difference between ojvm and client versions?

    Changing the java vm from client to ojvm result in the following error:
    Errormessage:
    java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
    Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
    Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm      RUNS OK.
    Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
    C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
    What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
    Various version info:
    Output from program:
    java version:1.4.2_01
    java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
    java vm version:9.0.3.738 cdov
    Taken from JDeveloper Help About:
    Oracle IDE     9.0.3.10.35
    UML Modelers Version     9.0.3.9.4
    Business Components Version     9.0.3.10.7
    java.version     1.3.1_02
    java.vm.name     OJVM Client VM
    java.vm.version     9.0.3.738 o

    However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

  • What is the difference between paid and unpaid versions of adobe reader

    What is the difference between paid and unpaid versions of adobe reader

    However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

  • Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number.  Also is the serial number the same for Mac and Win versions?  Many thanks.

    Wanting to deactivate PS Elements on Mac and transfer program to a friend. Is it OK to download a trial to my friend's Mac and use my serial number.  Also is the serial number the same for Mac and Win versions?  Many thanks.

    Yes it should work transferring PSE10 from Mac to Mac. There is a download link below for PSE10, which your friend could use. There is a formal licence transfer process but it’s not necessary for your friend to register the product (activation is sufficient) although he couldn’t benefit from future upgrade pricing without registration. Serial numbers typically can only be registered one time.
    Boxed versions of PSE are normally multi-platform with disks for both Windows and Mac; so the serial number is the same. Downloads have tended to be single platform only although I believe the current version PSE12 will work on both Windows and Mac with the same serial number – boxed or download.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  • What is the official AIR SDK and FLEX version to release for iOS6 ?

    Hi,
    Wanted to know which AIR SDK and FLEX version is fully suporting the iOS6 to submit to Apple.
    I found that AIR SDK 3.4 is supporting iOS6, though the code created for iOS 6 is not working correctly when build from Flash Builder 4.7 AIR SDK 3.4 FLEX SDK 4.6 .
    Thanks
    Regards

    19th...

  • What are the differences between mac and pc versions of elements 12

    I am a Mac user and have been disappointed at some of the limitations of elements 11 on my Mac versus what I understand you can do on a pc. Have these issues been corrected for Mac users in elements 12? Thanks

    I have to say that I find it really amusing when people who don't use a specific feature for a software program automatically criticize people who do need and/or use it. I realize that many people have different workflows, and some people use certain features often, whereas other people don't use those features at all. It doesn't mean that the feature should not be in the program. Having said that, I find watched folders to be indispensable for my workflow. In addition to photography, I do a lot of graphic design work. I use Photoshop Elements mainly for organizing all of my image files. I use the full version of Photoshop for most of my photo editing and graphic design work. I build most graphic design projects from the ground up in Photoshop. On the pc, once I initially saved the graphic design file, it would automatically be imported into the organizer for me. Any edits I made to photgraphs and then saved as psd files were also imported automatically into the organizer. As it stands now, I have to remember to (and sometimes hunt around for) any of these files after the fact so that I can import them in to the organizer. With 3 kids running around my house, I am often interrupted while working, and forget to immediately import the files into the organizer. It is a real pain in the neck for me to have to go back and search for files, sometimes weeks after I have created them. I really liked the way it worked on my pc and don't understand why it isn't available on the Mac. Lightroom has a version of the watched folder (though it moves files out of that folder upon import) and a synchronize folders function (though not automatic, and might take a while for a large catalog), both available on the Mac, so I would think that it's not really a Mac limitation. Then again, I'm not a programmer, and I know that something that seems like a small fix to me may require a huge amount of coding to accomplish. I just wish Adobe would tell me if this is NEVER going to happen, so that I can move on and establish a new workflow.

  • What is the diffferencebetween primavera contractor and full version p6?

    Can someone tell me the difference between the primavera contractor and P6?
    Someone told me they are all the same except that with the contractor you can only do up to 500 activities
    is that the only difference?
    How about file formats etc
    Lets say I buy primavera contractor and someone wants a schedule in P6 from me, which tehy will, if I do it with contractor will it be the same file type so they will not notice it if it is less than 500 activities?

    Hi there
    The only difference is the amount of time you have to use it before you have to ante up and pay the piper.
    Well, there is one other difference. Typically, whatever you create using the trial is pre-configured with an expiration date on the project. That means that if you didn't purchase, the content you created will become unusable until you purchase and publish again with the expiration removed.
    Cheers... Rick

  • What is the difference between Retail and Academic versions of FCP2

    I was recently offered an Academic version of FCP(6)2 at a lower price than the retail version. I am tempted to get it but I have heard rumors and read posts that say the Academic version is limited to students and academic learning. Also, there will be no way to update the version when updates become available for FCP7. I would need to purchase the whole suite again. Is this true?
    I am not a student and would be using the version for part time income. I just thought a lower price than retail would be a good find. Please let me know.

    You are correct. You should be a student or teacher. And you can't upgrade it.
    Patrick

  • I upgraded to PSE 13 so I could edit RAW files from my Sony a6000 but PSE 13 is not recognizing any of the RAW files. My Sony a6000 is on the Camera Raw list and uses version 8.4. PSE 13 uses Version 8.6. Why isn't it recognizing the files?.

    Why isn't PSE13 recognizing my Sony a6000 RAW files?

    Not sure if upgrading to 8.7 would make any difference.  Photoshop has 8.7 so worth a try:
    I don't use PSE13 yet so don't know if this upgrade is available for it.

Maybe you are looking for