CDR of CUCM ver 6.0 & ver 8.5

Guys,
I have a customer whose going to upgrade there Call Manager from vesion 6 to version 8.5.
The current Call Manager is integrated with a third party billing software.
I just want to know is there any difference in the CDR data record information between CUCM release 6.1.2 and 8.5 ?
If the CDR data record information is different then i may will face problem in getting the information from billing software.
Can any body share the link for above required information so that i can share it with customer.
Regards,

Review the CDR/CAR links for that info:
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

I uninstalled ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.

Can I go "CS4(Japanese Ver)" from "CS1 Educational Ver.(English Ver.)??

Hi guys~
I need your help!
I am currently using Adobe CS1 Premium (Educational / English Version).
I purchased this like 6years ago while I was still a student in the US.
My PC is a G5 Power mac and the OS is in English.
The problem is that now I got a CS4 Design Standard upgrade (Japanese Version).
So what I wanted to know is if It's possible to upgrade to CS4(Japanese Ver) from CS1 Educational Ver.(English Ver.)
I haven't open the upgrade package yet because I am afraid it's not gonna work.
I have heard and read opinions from both sides I now I'm really confused and don't know what to do...!!
Please help. I know I can trust in you guys!
Thank you!!

As long as you are upgrading from Mac version to Mac version it should be fine.

Ease of use from ver 2 to ver 8

A long time ago I bought Elements Ver 2 and could not understand it all and returned it. I am looking for a program to edit photos like fun stuff,,adding people to other picts, changing picture sizes for a group of picts (pixels/size/names/etc), changing backgrounds etc. something a bit more than the camera and microsoft standard photo editing has to offer. Organizing and video is not a real preference to use a lot . Is the new ver 8 easier to use than the older versions? Is there another adobe product I should get instead. Thank you for anyone who can take the time to assist me.

Version 8 is easier in that it has more one-button fixes and some newer tools to help you, but there is no program from anyone where it's a snap to move a person from one photo to another. I would suggest downloading the trial for PSE 8 and seeing if you like it. There are millions of tutorials on the internet now for anything you might want to do, which wasn't the case for version 2.
Oh, and no, there's nothing simpler from adobe. You might want to look into something like Picasa if you find PSE 8 too much.

Updating from Ver 4 to Ver 5

I have an Old version of Adobe PS LR ver 4 - Want to upgrade to the latest & greatest version (5.?) - I went to the DL page and there were numerous versions of LR 5. The question is if I select the most recent version and install will I be up to date. Or do I need to install them sequentially.
Also how do I determine version of 4 that I have installed

You upgrade to the latest version (which is 5.5), and that's all you need to install
how do I determine version of 4 that I have installed
Help->About Adobe Lightroom

CDR with CUCM 6.0

Hii experts,
I want to know the steps, how to active the CDR service in CUCM 6.0 and make it up and running? I hade active the Cisco CAR Web Service & Cisco CAR Scheduler, but I can not find any record.
Thanks

Cause 2
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008056bd4e.shtml#cause2
HTH
java
if this helps, please rate

What is the significance of having Ver 1 and Ver 2 in a Bal Sheet?

Hi,
1. What is the significance of having Version 1 and Version 2 in a Balance Sheet(Income Statement)?
Any real life significance of these versions?
2. I had a previous question which was not answered, can verify if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, can you help with it?
Thanks

Hi,
thanks for the response.
Does this versioning process also takes place in Balance Sheet or it is something done only for Income Statements?
Is this the reason why some queries have varaibles to enter Version 1 and Version 2?
If Version 1 and Version 2 are from the same datasource, and you bring all into a DSO, what will be the advantage to separate the Version 1 and Version 2 data different cubes?
To help me get your response well, is the Versioning concept used in addressing the other part of my question:
i.e. if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, how do you address this?
Thanks

How can I confirm that my extensions are compatible with FF ver 4 and ver 5 before I upgrade?

When I have upgraded in the past I have been affected by extensions that do not work in the new version. How can I determine if my extensions are compatible with new versions. I have looked at knowledge base and other help but I can find nothing.

Thanks, Forewarned is forearmed.
Checking my incompatible extensions now seems to be less than when I just casually reviewed the list. Perhaps authors are still updating their products.
Most of my incompatible extensions are not critical. Perhaps the most important is AARDVARK which I use extensive prior to printing bank statements.
My incompatible extensions are:
Aardvark
Colourful Tabs
Image ToolBar
MS .NET Framework Assistant
Quick Page Zoom
Rewind/Fastforward Buttons
Windows Update

How to transfer photos when upgrading from ver 6 to ver 11 HELP!!

Can someone please HELP. I have version 6 on my computer. I have a new version 11 FULL install on cd. After I install version 11, how do I transfer all of my pictures over from version 6? After that is completed, I assume that I can just uninstall version 6 from my computer? Thanks anyone for the assistance.

Thanks Barbara B for your timely assistance! If I understand you correctly, after I install version 11 (FULL install, not a version update), my Catalog (4659 items in 256 folders) will automatically be imported into the version 11 Organizer. At that point I can uninstall Elements version 6 from my hard drive. That sounds too easy, but do I have it about right? Thank you!

Myspace wrt54g ver 5 fw ver 1.01.0

i have a wrt54g version 5 with firmware 1.01.0
when i visit myspace some images dont show up
when i go to other sites i either get page cannot be displayed or missing images
it useally resolves if there is no activity for 5 min this problem is verry annoying
either myspace has a bug or the issue with the firmware
i down graded to firmware 1.00.9 it works fine

hi , try this.....upgrade the firmware to 1.01.0 and then get into the router setup and adjust the value of the MTU....you can start at 1492 and go down gradually to 1200 if necessary....i think this will resolve your issue....
another thing you can try is to reset your TCP/IP stack
at the command prompt ,run the following command
"netsh winsock reset catalog" and restart your PC.

I want to install ver 7 as ver 8 interfers Norton 360 toobar.

I want to uninstall version 8 and reinstall version 7. Version 8 interferes with Norton 360.

Norton released update compatibility yesterday night
* http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640
do live update frequently manually untill no update are required then reboot your pc

CUCM 8.6.2 - Doubt about recommendated FTP to collect CDR

Hi Guys,
I Would like know if there are any list recomendated or validate software about FTP to collect CDR in CUCM and the same question to Operation System.
Thanks,
Wilson

There are many software avaialble but recommendation/suggestion i can see this.
Cisco uses the following servers for internal testing. You may use one of the servers, but you must contact the vendor for support:
•Open SSH (refer to http://sshwindows.sourceforge.net/)
•Cygwin (refer to http://www.cygwin.com/)
•Titan (refer to http://www.titanftp.com/)
Note For issues with third-party products that have not been certified through the CTDP process, contact the third-party vendor for support.
Br,
Nadeem
Please rate all useful post.

Recurrent requests to download latest ver. of Adobe Flash Player

I have Windows 7 Pro 64bit. I have downloaded what is called the latest version of Windows 7 64 bit ver. of ADFP (Ver. 11.9.900.170) and Adobe says this download minus the Chrome should be 16.4mb. When I download it and it is installed in control panel under the list of programs Adobe Flash Player 11 ActiveX is shown and the ver. is listed as:
11.9.900.170 but it shows the program to be only 6.00mb. Also on the left side where there should be a red icon for Adobe Flash Player the icon is NOT red but it is a rectangular box black out line and center white. I have gone to "Manage ad ons" and it is enabled there. Still I get daily requests from www.lumosity.com to "Download the latest version of Adobe Flash Player and they will not let me go on with their program until I do so again. This time everything is the same except the icon on the left side of the program is red as it should be. I also get same requests from World of WarGames, they don't stop the game but at the end they suggest downloading the latest version. When I down load the Flash Player why is it not the 16.4mb they say it will be. Why only 6.00mb. What is disabling Adobe Flash Player. I'm using the 64bit version of internet explorer to download it but it seems I'm only getting the 32bit version of Adobe Flash Player. Could that be the problem? What would be a way to fix this? I'm using Internet Explorer 10 and I have both the 64bit and the 32bit versions on my desktop. Please offer some experienced help with this annoying, recurrent problem! Thanks. I've uninstalled and reinstalled several times, but that was no help.

I'm not a tech. I don't work here. I'm a volunteer, as are ALL participants here... with a very limited few exceptions.
The following instructions will be as clear as if I were sitting right next to you holding your hand on the mouse:
Download the Flash Player for ActiveX (Internet Explorer), Flash Player Uninstaller and the Shockwave Player Uninstaller
Save them to your Downloads folder - DO NOT RUN THEM.
Close your browser.
Make SURE it's closed.
The icon should NOT have a frame around it.
Open your Downloads folder and run the Shockwave uninstaller.
Follow the prompts.
until it finishes.
Then, run the Flash Player uninstaller.
Once it finishes, open Windows Explorer to the "Computer" window.
Double click the C drive to open it. Open the Windows folder.
Open the System32 folder.
Open the Macromed folder.
Delete the Flash folder.
Press (Shift+Delete) and click Yes.
Navigate back to the Windows folder. Double click the SysWOW64 folder.
Open the Macromed folder.
Delete the Flash folder.
Press (Shift+Delete) and click Yes.
For the next part, you need to have Hidden Files and Folders visible.
Click Tools>Folder Options
(If your Windows DON'T have a menu bar click Organize>Layout>Menubar)
In the Folder Options, click the View tab, and check the button for "Show Hidden Files, Folders and Drives"
Click Apply
Click OK
In Windows Explorer, open your [user] folder
Double click the AppData folder.
Double click the Roaming folder.
Double click the Adobe folder.
Delete the Flash Player folder.
Press (Shift+Delete) and click Yes.
Navigate back to the Roaming folder and open the Macromedia folder.
Delete the Flash Player folder.
Press (Shift+Delete) and click Yes.
Close the window and click Start>Run (Press thw Windows key+R if your Start menu doesn't have "Run" in it.
Type "regedit" and click OK
In the Registry Editor, goto HKEY_CURRENT_USER/Software and delete the Macromedia folder.
Go to: HKEY_LOCAL_MACHINE/SOFTWARE and delete the Macromedia folder there.
Close the Registry Editor and then run the Flash Player installer and the Shockwave installer for Internet Explorer/AOL from here: http://www.adobe.com/shockwave/download/alternates/#sp

WRE54G Ver.3 Setup Wizard

I have lost my Setup CD for the WRE54G Ver.3 and it is not available for download on the Support and Services page (although there are Setup Wizards for Ver.1 and Ver.2).
Would you please provide access to this Wizard.

If you are unable to find the setup CD you can configure your Range Expander manually...See the link here

Can't open PDFs in Netscape with Ver. 7.

I had Reader ver 7 for some time. I am using Netscape ver 7. Awhile back I succumbed to the nag notices and downloaded and installed Reader ver 9. Ver 9 caused problems so I uninstalled it and did a system restore to recover ver 7. Now I can't open pdfs from within the Reader window in Netscape. At first Netscape wouldn't even open Reader but I was able to correct that. However, now it will open Reader in a separate window but locks up whenever I try to download a pdf. I have XP Sp3. Any help would be appreciated.
Thanks,
Gary

Right or control click a PDF file you have saved on the hard drive then click: Get Ino
In the Get Info window you'll see: Open with
Select Preview from the pop up menu.

CDR of CUCM ver 6.0 & ver 8.5

Similar Messages

Maybe you are looking for