Cdrom detected on and off?
I have a 5 month-old KT3 Ultra2 and it is so weird! I took my burners and cdrom out of my old system (where they were both working flawlessly) and put them into this one. Well, from day one the cdrom refused to work (the activity light on the drive just turns on and stays on forever), but the burner was ok. Now the burner stoped working too. Sometimes when I reboot, the BIOS detects the burner, other times it doesn't. Sometimes when it detects it and windows boots up and I put in a CD the computer locks up.
This is so bizzare! I have tried two other cables and updating the BIOS. Just want to make sure that it's the mobo that has gone crazy and not me...?
Thanks!
Try them one at a time.
Are they properly jumpered in case you rearanged the way they are hooked up on the IDE channels ?
Similar Messages
-
is there an app for iphone which can be set to start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period. basically someone is vandalising my vehicle and i really really want to catch the mongrel
thanks for any suggestionsNope.
-
Hey guys i have the newest macbook air and i recently bought a magic mouse and my macbook doesn't detect it i already tried switching it on and off and all that other stuff. Any help??
when you have the same issue after the SMC reset:
put new batteries in the MM (even if the others are not empty), turn Bluetooth off then on again on the MBA, take all USB connections out (if any), delete the pairing of the MM and re pair the MM. -
found olf iphone 4 or 4s in the back of my parents closet. They told me I could now have it back and its been a year since the last time I saw it. It wont turn on unless it is plugged up to a wall plug in. But as soon as I turn it on it says activation required then it says plug into itunes. After I try doing that it plugs into my computer but flashes the apple logo on and off. It wont even turn on all the way when plugged into computer...only the wall. ANY IDEAS?): and no I didnt steal/find this phone. It is mine. I dont have the guts to steal but a lot of people online have accused me.
You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427
-
Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.
Hey Gautam5058,
Thanks for the question, and welcome to Apple Support Communities.
The following articles provide troubleshooting steps that may help to resolve your issue:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/TS1569
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
You may also want to try resetting your computer's PRAM and NVRAM.
To resolve this issue:
1. Turn the Apple Wireless Keyboard off.
- For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
- For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
2. Click the "Continue" button as the Setup Assistant instructs.
3. Power the Apple Wireless Keyboard back on.
4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
Thanks,
Matt M. -
Computer shuts on and off some corrupted files - no virues now
Listed below are some of the errors I found on event log in the laptop:
I have a Qosimo 8 megs of memory, windows 7 64 bit. Running AVAST 7.0 antivirus and Malwarebytes - both paid subscriptions. I think the model number is 830 530 I bought in 2009.
The shutdown problem has
been happening on and off for the last six months. I had two major instances of trojans taking over my machine and it caused constant shutdowns. AVAST worked with me on one and they had me use malwarebytes and spybot and hijack this. They took over my computer to get it up and running properly, but this new round of errors a trojan was found in the registry key and the startuptoolbar. Two nights ago I had another shut down several times and after running malwarebytes and antivirus I could find no errors so I’m leaning toward corrupted files? Is there anyway to fix these files without having to reformat the hard drive?
I did run a computer repair and a computer memory repair tonight using F8 and no problems were found by the computer. I’m not sure what to do with these errors in event viewer.. I get the toshiba error
quite often and it madely stops me from going online with my internet connection, and I had downloaded a newer version but same problem – I use windows repair in network and the error is always resetting the toshiba network IP. I just put a note into toshiba on that problem.
I also use microsoft silverlight for my fenderfuse application which needs that software operate properly. I’m not sure exactly what to do with that Custom dynamic link libraries are being loaded for every application. It states to check libraries – but what am I checking for? I do not have a lot of programs on the laptop but not sure what to look for in library?
Windows logs under Application
The description for Event ID 0 from source Ipod service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event
The description for Event ID 0 from source SignInAssistant cannot be found. Either the component
That raises this event is not installed on your computer or the installation is corrupted. You can
Install or repair the component on the local computer.
If the event originated on another computer, the information had to be saved with the event. The following information was included with the event:
WLD InitializationTimerQueue. QueueWorkItem Started
The win logon notification subscriber <sessionEnv> was unavailable to handle anotification event.
The description for Event ID0 from source IViRegMgr cannot be found.
Same for AdobeARMservice
Same for User Profile Service
Critical events
System has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, rashed or lost power inexpertly.
Administrative
Events
Unloading the performance counter strings for service WmiApRpt failed. The first DWORD n the data section contains the error code.
The performance strings in the performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance Registry is the first DWORD in the Data section, LastCounter value is the second DWORD in the Data Section, and LastHelp value is the third DWORD in the data section.
Several warnings on Toshiba Servicer Station. Error checking dependency (1df917db-3056-41a-bbac-0489a6b63d4dj: Unable to retrieve registry value.
Toshiba Service Station - skipping empty element (tsu:setup_args) (several errors on this one)
( I also installed the latest Toshiba service station and it did not fix the error problems in events log. When I did a restore it was before softare update this was added so now my computer is working properly with windows on connecting to the internet wireless.)
Unloading the performance counter strings for service WmiApRpl (wmiaprpl) failed. The first Dword in the Data section contains the error code.
Failed extract of third-party root list from auto update cab at: www.download.windowsupdate.com/msdownload/udate/v3/static/trustedr/en/authrooststi.cab> with error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
Biggie? Custom dynamic link libraries are being loaded for every application. The system administration should review the list of libraries to ensure they are related to trusted applications.
Audit events have been dropped by the transport. 0
The system has rebooted without cleanly shutting down first. Kernel-power - this has happened several times.
The performance strings in the Performance registry value is corrupted when process Performance extension counter provided. The BaseIndex value from the Performance registry is the first DWORD in the data section, last counter value is the second DWORD in the Data section, and LastHelp value is the third DWORD in the data section.
Sometimes my computer shuts down often on its own and I find a Trojan - other times it shuts down often during a start up and I find no viruses as was the case yesterday. Today I did not get on the internet and the computer worked fine.
I guess I need to know if there is a way to reinstall the corrupted files without having to go back to the default settings when I got the computer. Does toshiba have a windows repair disc that works better then what I did with using F8 and having a system repair and memory check done that found no errors? I also installed the latest Toshiba service station and it did not fix the error problems in events log. When I did a restore it was before this was added so now my computer is working properly with windows on connecting to the internet wireless.
Malwarebytes said that by looking at these event viewer logs that it does not appear that I have a virus now but I do have corrupted files and can toshiba help me in getting them fixed. I really hate to do a complete reformat.
Thanks
Rose
Solved!
Go to Solution.Event Viewer 5/14 events
Window logs
Application –
Information - Software protection service has stopped
Error – Unloading the performance counter strings for service wmiaprpl failed. The first Dword in the data section contains the error code
The performance strings in the performance registry value is corrupted when process Performance ext
The winlogon notification subscriber <SessionEnv> was unavailable tohandle a notification events
Error – Your computer was not assigned an address from the network (by the DHCP) Service) for the Network Card with network address0x701A043A07AE. Your computer willcontinue to try and obtain an address on its own from the network address (DHCP ) server.
Failed extract of third-party root list from auto update cab CAPI2
Warning – customer dynamic link libraries are being loaded for every application. The system Administrator should review the list of libraries to ensure they are related to Trusted Aplications.
The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The baseindex value from the performance registry is the first Dword in the data section, etc. – this error shows up often for today 5/14 (on line the aqnswer to this error is -
Performance counters are collected and used by services and applications. If they are installed incorrectly or with improper permissions, performance counters cannot be loaded, and services or applications cannot collect or interpret the data.
I noticed that software protection stopped and then it showed software protection working. I did not get any critical stop errors like I did before but that is because I don’t have any Trojans or viruses. I ran a full scan with both Avast and Malwarebytes yesterday and no problems.
Under system for today I see
The multimedia Class Scheduler Service entered the stopped state.
The application experienced service entered the stopped state
Under application Window logs for today
Fault bucket 130885241, type 5 Event Name PNDriverimportError response: not available
This is a warning error:
Windows detected your registry file is still in use by other applications or services . The file will be unloaded now. The applicationsor services that your registry file may not function properly afterwards.
10 user registry handles leaked from \Registry\User\(this section covered several registry problems I sent the note online and this is what they state: Cause this behavior occurs because the windows operating system automatically closes any registry handle to a user profie that is left open in an application. User Action – this is a warning event the application that is listed in the event detail is leaving the registry hand open, and it should be investigated.
I don't know how serious this probems are - I didn't like seeing the software security being stopped. But then it started up. I have copied everything personal on this laptop so I am ready to reformat if needed.
I still have the problem about IE not opening links unless I right button click to open it. I also had to make a separate ID to run Fender Fuse software as this computer was not recognizing the USB slot where I connect the amp to the laptop. Fender had me set up another id with minimum items and then I was able to connect to the amp and make changes.
Rose -
DV7T quad core fan on and off on and off repeatly
Hi everyone, I was wondering if anyone experience this fan problem. Just today, I opened quite a few chrome tabs, maybe like 50 or so. And after a few hours of usage, suddenly the fan started to turn on and off on and off at every 1 second interval. So I shut down the laptop and restarted it. Of course now it's back to normal. But could this be a symptom of something in the hardware? Overheating? Too many application open? Any hardware fault detection program that can find the problem?
(I do quite a bit of high graphics gaming on this laptop sometimes and never experienced any problem before)Hi Rainallthetime,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP dv7t Notebook not working correctly. Here is a link on Overheating. The overheating could cause the computer to keep shutting down or the fans not working constantly. I would also check to make sure your BIOS does not need updating.
50 open Windows in Chrome is likely to cause overheating and then shutting down.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
G5 computer flashing on and off... broken??
I was on the phone with Apple for something and they said to press command + option + P + R. Then my computer started making a really weird noise and the power light was blinking on and off three times then stopping... then repeating over and over. HELP ASAP!! Please! I talked to Apple again and they said I have to take it in to the store!! Anyone know how to fix this??
I shouldn't have to use up my own time for something Apple did!Is this an iMac G5 we are talking about here? PowerMac8.1 would indicate thus.
Normally, the three-flash sequence indicates a problem with the RAM in the machine. The G5 iMac information I have (not necessarily complete, mind you) indicates that it uses beeps, rather than flashes, but it could be either.
Some further questions, then something to try.
What problem were you having when you were advised to to the PRAM reset?
Was there anything else you were told to try and did try before doing the PRAM reset?
Now, something you can try is to simply reseat the RAM modules in the computer. Or, if you have multiple modules (or sets), remove one module (or set) at a time and try to boot.
The following may or may not apply to your machine, but is can serve as a guide:
RAM and Processor Verification: Power-On Self Test
A power-on self test in the computer’s ROM automatically runs whenever the computer is started up after being fully shut down (the test does not run if the computer is only restarted). If the test detects a problem, the status LED located above the power button on the front of the computer will flash in the following ways:
• 2 Flashes: No RAM is installed or detected.
• 3 Flashes: Incompatible RAM types are installed.
• 4 Flashes: No RAM banks passed memory testing. -
I tried to update my iphone4, in the middle it gave an error and now when try to connect it the computer doesnt even detects it and neither does itunes
Power the phone off completely. Plug the USB end of the cord into the computer, leaving the other end unplugged from the phone. While the phone is powered off, open up iTunes, hold down the home button on the phone, and plug in the USB cord to the phone, making sure you keep holding down the home button. In about 15 seconds you should get a pop-up in itunes saying that it's detected an iPhone in recovery mode. Click 'Ok' and 'Restore'.
Your iOS update crashed and your phone is in recovery mode. The good news is that this will fix it, bad news is that unless you had everything backed up in either iTunes or iCloud, you've lost everything as your phone was wiped when the iOS update crashed. -
I've tried charging it overnight and it still will not turn on, when connected to the charger the apple sign just goes on and off but does not do anything, i've tried resetting it and this also does not work, but then once taken off the charger it doesn't even say the sign for charging it just does nothing
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
-
I have a new iphone 5 that won't play selected music. When you try and pick a particular song is skips around randomly to another song. I've tried turning the shuffle on and off with no luck.
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
My iPad 2 has frozen starting up i have turned it on and off
my ipad 2 has frozen on the apple logo while turning on i have tryed turning it on and off but that hasnt worked i have also tried charging it what do i do
If a reset doesn't work, you may want to force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank
JasonFromSK wrote:
With the newest Airport firmware (7.6.1), it seems I should be able to do this.
Really? I need to check that out!
You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
AC -
My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?
Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.
-
I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)
Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L
Maybe you are looking for
-
Games app not working In I Phone 6
Hello: My game app went stark white and blank when trying to set up, and responds to nothing at this point. Help please...
-
Hi experts I am working file to idoc
1) I am working file to idoc scenario. i configured everything fine .but it is not showing any messages in runtimeworkbench.? where i have to see the messages.
-
Opening VI forces LabView to crash - How to reconstruct data of the VI?
Hello, as explained in the subject LabView crashes. This means if I open the VI the LabView project just disappers. I would like to reconstruct the internal data/programming of the VI? How can I do this?
-
Create material with reference using BAPI
Hi I need to create material using refrence to another material for all material Views. Can I use BAPI_MATERIAL_SAVEREPLICA. Which parameter I need to fill for reference materia Moderator message: please do your own research before asking. Edited by:
-
Replaced HDD, now MacBook Pro won't power on.
Just bought a new HDD, Seagate Momentus 750Gb (link below). Installed it in my MacBook Pro, replacing the old 160Gb drive (also a Seagate Momentus, older version though) and when I tried to boot my laptop back up it won't even power on. I don't hear