CDROM not reading disk - A305-S6825

Toshiba Forum Readers,
My CDROM is not reading disk and when i put a cdrom disk in the reader it does not show up in my cpu directory. Please help.
I have a Toshiba Satellite Laptop - A305-S6825
Please email me back at My Personal GMAIL account by clicking here. Thanks for your time
-Andy Cabaniss
[email protected]

Hi Michael!
Congratulations!
Perhaps you would like to mark your question as answered, and the relative posts accordingly!?
What are question answers?
When a community member posts a question as a topic starter, other members can post an answer in reply. Please note that not all replies actually answer the question.
In some cases, an answer can be just some hints or helpful information to help the poster solve an issue. The originator of the topic can mark such a reply as a Helpful post. In other cases, a community member may post a specific answer that provides a solution to the original poster's issue. The originator can then mark this reply as a Solved post.
The original topic poster has the choice to mark replies as either Helpful or Solved, or not mark a reply at all. In addition, the originator can end the discussion by marking the topic as Answered, which provides a visual cue—a green star—to the community members. This lets everyone know that the topic contains valid helpful information.
Note: Only two replies may be classified as Helpful and only one reply may be classified as Solved in any question topic. Non-question topics do not offer these classifications.
This info, and more, can be viewed by clicking on ? Help & Terms of Use, located under your login name, on all "Discussions" pages.
Enjoy your Panther experience, and repost with any questions you may have!
ali b

Similar Messages

Pavilion 23 AIO touchsmart CDROM drive not reading disks

The CDROM drive on my computer is not working. Well, it is not reading discs. I have tried several cd's, uninstalled the drive, and made sure it was not gunked up. I can hear the drive *trying* to read the disc, but opens and says to install a cd. Any other suggestions? Will I just have to replace the drive? The computer is fairly new (under 1 year old).

Hi, Please try Run now from the following link:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
or:
http://support.microsoft.com/kb/314060/en-us Regards.

Pavilion g6 not reading disk

Hello,
My Notebook will not read any disks i put in. I can hear my laptop run for a few seconds after i insert it then nothing. It just wont register that a disk as been insterted. It is mostly DVDS that i wish to use.
In this PC it comes up as "DVD RW Drive (E"
HP Pavilion g6 Notebook PC, window 8.1
Please help. Im not sure what other information you will need or what else i could tell you.

For step 2, as a result it say Media in CD/DVD drive is not readable (hp DVD-RAM UJ8B1 SATA CdRom Device) not fixed. Eveything else listed was "fixed:
Im a little unsure about steps 3 and 5 as i have never really understood what it means for me to run as an administrator, and what the password this is.
Im sort of working on the first part of step 4, not entirly sure what i need to do.
Im not very technical

MSI DVD 8216M Not Reading Disks

I purchased an MSI DVD (8216M) from NewEgg a week ago. So far I have run into a few DVDs that this drive will not play.
One in particular is a brand new DVD I bought yesterday. At first it would not play the disk it at all. I updated the firmware, and it will now read the DVD. I can access the menu, and play the special features, but if I go to scene selection and select a scene, or play the movie, it fails to read the disk.

aMAYSing wrote:
My DVD/CD player is not reading any of my disks. It spins them, as if it were going to read them, but then spits out the disk. Any suggestions?
When did this start happening? Did you load any apps or software just before this began?
You might reset PRAM

T43 Recovery Disks Not Reading Disk 1

I have tried recreating the factory partition but I keep getting an error on Disk 1. I have wiped the drive using the PC-Tools software utility, tried the process with and without the supplemental disk and it gets all the way through to disk 1 and says it's not the correct disk. I have checked the disk on another computer and the Disk 1 Recovery disk is good. Any ideas?

hey rconaway,
Is it possible for you to grab a screenshot of the error ?
At the same time, when you made the recovery disc; what was the version of Rescue & Recovery that you were using?
Currently Rescue&Recovery is at version 4.30.0027 (Win 7)
I would recommend upgrading if you havent and also try making another set and see if it works
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

DR4 - A. Does not read disks

My DR4 burner started working ok burning onto Ritek,Bulkpaq and Data Safe media. After 8 weeks its stopped writing to this media. When i try and read a previously burnt disk the green light at the front of the drive keeps flashing and locks up.
Its then displays a message of " No disk found". If i insert an original DVD or music CD all is okay.
Firmware is still at 2.30. Software Nero,Pinnacle to burn with. WinDVD and Power DVD to view with.
Any ideas!

I have just installed a DR4-A in my system
AMD Athlon XP 2700+
512 MB Ram
Gigabyte GN7N400V Pro 2 Mainboard
40GB Hardrive
Have no problem in reading discs but it will not identify a CD-R disc in the drive when using the drag and drop utility that comes with Windows XP.
When using device manager and checking properties of the drive, under volume info it always lists the CD-R as DVD.
Starting to rip my hair out (and not much of it left)!!!!
Any ideas or do I just have a duff drive?
J

Satellite L655-106 - CD/DVD drive does not read disks

Toshiba satellite L655-106 dvd rom is reading all types of cds as blank.
I have run the registry cleaner and re-installed the driver but no effect

Are all disks no readable?
Try to clean the laser lens using cotton wool tip and alcohol.
Then try again

Is DVD ROM tray broken? Trouble opening, not reading disks. G60-63OUS Notebook

My DVD/CD ROM tray is having difficulty opening (I need to keep pushing button about 10 times before it will finally open). When I am finally able to insert a disk in the tray, my laptop does not recognize there is a disk present and prompts me to load one. Is this a hardware issue - do I need to replace the drive? G60-63OUS Notebook

Not reading disks

I have a iMac 21.5" 2009 3.06GHz Intel Core 2 Duo, version 10.6.8 and all of a sudden it stopped reading discs, I tried inserting a copy of Snow Leopard to mount the disc via firewire on my macbook. I got an error message when I restarted my computer and it said Disc Non Readable and that was the copy of Snow Leopard. I tried inserting my original iMac Installation DVDs and it just ejected the discs same as Snow Leopard. I inserted a burned DVD that had some files on it and it mounted. Any ideas????

Having a similar issue with my MacBook Pro OS x 10.6.8. I'm responding to keep this discussion alive and maybe someone can help us. I read something about trying to clean the optical drive, so I'm looking for a slot drive disk cleaner to try this weekend. After that, I guess it's to the apple store.

Superdrive does not read disk when inserted

Hi there,
Having a problem with my superdrive. When I insert any disk, the drive takes it but it can't read it.
Any suggestions as to the problem?
Thanks
Carmela

You've tried commercial CD's and DVD's? Does it show up on the desktop? In Finder>Prefereces>General the box is checked?

Drive not reading disks

I've had my MacBook for approx. 3 months now. I went to burn a CD this morning with iTunes, insert the blank disk, and it makes a funny noise while it tries to read the disk then ejects the disk automatically. Does the same thing with all CD's and DVD's. What do I need to do? Anyway to fix this without sending off to Apple?

You might want to try running a cleaning CD in your '12 PowerBook G4's optical drive. If dirt gets on the laser lens it can cause read errors to occur & ejecting of the disc due the Mac's inability to read the disc properly. The cleaning CDs have a special cleaning brush/fiber built into them that knocks the dirt/dust loose of the optical drive's laser lens.

Hp-dvd-ram-uj8c2 not reading discs

hi there, i have a problem with my hp-dvd-ram-uj8c2 device, its not reading discs,but on properties it shows the device is working..
thanx

Hi @codesa ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your optical drive will not read disks but shows that it is working properly in Device Manager. This may be due to it requiring a driver update?
Have you done all your Windows and HP updates?
Here is a link to the HP Support Assistant to aid with the HP updates.
If you are unable to update please note this solution by @DavidPK hp dvd ram uj8c2 won't update on hp pavilion
I hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Boot image does not exist and cannot read disk label errors.

Hi - I'm having a problem with installing Solaris 9 4/04 on a Netra T1. The Netra already has Solaris 7. I need to get this set up as a jumpstart server but it can't find the boot image. I'm using a brand new bonafide installation disk - not a copy. The system won't let me install/upgrade to Solaris 9 either. I get an error stating that disk label can't be read. I've tried swapping out the CDROM but I still get the same errors. Does anyone know what or why this may be happening? (Oh - and another strange thing - like I said the CDs are the original but there doesn't appear to be a cdrom/cdrom0/s0 directory. The directory I see is cdrom/cdrom0/sol_9_404_sparc/Solaris_9/Tools)
ERROR: Install boot image /cdrom/sol_9_404_sparc/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
and
Excuting last command: boot cdrom [- nowin]
Boot device: /pci@1f,0/pc1@1/ide/cdrom@2:f file and args: [- nowin]
Can't read disk label.
Can't open disk label package
Evaulating: boot cdrom [- nowin]@1/ide@e/cdrom@2:f File and args: [- nowin]
Can't open boot device
I appreciate any help at all - is there anyone out there who can tell me what I may be doing wrong?
Thanks

Hi check that you are booting of the right cd. Make sure it is soalris 9 software 1/2 if that fails then it may well be that your cd is buggered. most likely it is buggered it it cant find the boot image.

Can't read disk label: Booting Blade from CDROM

Folks !
I am trying to boot Sun Blade 100 from its internal IDE CD-ROM drive
using the Solaris 8 boot/installation CD (01/01). When I give the command
"boot cdrom" from ok fromt in OpenBoot, disk seems to spin for a moment
(green light comes on) but it eventually fails complaining:
can't read disk label
can'open disk label package
failed to open boot device.
I have tried following (all to no avail)
"boot /pci@1f,0/ide@d/cdrom@1,0:f" since devalias shows that cdrom is aliased to above. I also tried cdrom@0,0:f, but same result.
tried boot/installation CD from Solaris 9
did set-defaults reset-all
checked probe-ide and show disks output to make sure CDROM is recognized - it is primary slave.
swapped another IDE CD-ROM drived pulled from a PC. It was recognized but still not bootable.
Makes me wonder if PROM/NVRAM is corrupted. Hard disk
drive is trashed as such (another Blade 100 problem, since it was crashing
often, I had to force powerdown using the switch eventually leading
to corruption of basic files like /usr/lib/libnsl.so.1, so I can't force fsck)
I have to boot from CD to recover the machine and hopefully
repair the disk drive or swap it out and upgrade to Solaris 9.
any help would be appreciated.
thanks very much.
-Sanjay Kumar

as per the message it appears either you have a bad CD drive or CD media . If you have another machine try to boot this CD and verify it is working there. If the CD is ok you will have to swap the cd drive for testing
Hemant
http://www.adminschoice.com
Folks !
I am trying to boot Sun Blade 100 from its internal
IDE CD-ROM drive
using the Solaris 8 boot/installation CD (01/01). When
I give the command
"boot cdrom" from ok fromt in OpenBoot, disk seems to
spin for a moment
(green light comes on) but it eventually fails
complaining:
can't read disk label
can'open disk label package
failed to open boot device.
I have tried following (all to no avail)
"boot /pci@1f,0/ide@d/cdrom@1,0:f" since devalias
shows that cdrom is aliased to above. I also tried
cdrom@0,0:f, but same result.
tried boot/installation CD from Solaris 9
did set-defaults reset-all
checked probe-ide and show disks output to make sure
CDROM is recognized - it is primary slave.
swapped another IDE CD-ROM drived pulled from a PC. It
was recognized but still not bootable.
Makes me wonder if PROM/NVRAM is corrupted. Hard disk
drive is trashed as such (another Blade 100 problem,
since it was crashing
often, I had to force powerdown using the switch
eventually leading
to corruption of basic files like
/usr/lib/libnsl.so.1, so I can't force fsck)
I have to boot from CD to recover the machine and
hopefully
repair the disk drive or swap it out and upgrade to
Solaris 9.
any help would be appreciated.
thanks very much.
-Sanjay Kumar

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

Hi Joe,
Thanks for your quick response. I should add....it worked before. When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac. Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed. I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD. SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously. I do not remember changing any settings since then.
When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc. The problem is my DVD is all miscellaneious files/documents. I just want to be able to see them in the finder. I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents. Again, I was able to open them previously and the DVD is not corrupted in any way.
Any additional advice?
Thank you!

CDROM not reading disk - A305-S6825

Similar Messages

Maybe you are looking for