CDRW/DVD UDMA Issue with KT4VL

Hey folks,
Before I got my Kt4VL I had a MS6380 KT266 Pro board, which allowed me to utilize UDMA with my Secondary Channel CD Drives (CDRW & DVD). I used to be able to backup CD to CD in about 2-3 minutes. Now that it is only PIO, I'm up to 9. This doesn't seem right. Anyone got an answer?

For MSI KT4V-L (MS-6712) use file at top of this page:
KT4V-L Bios Update
I have my pc setup like this:
Maxtor 40GB 7200 RPM HDD (NTFS) IDE-1 Master
TDK VeloCD 161040x CD-RW IDE-1 Slave
Lite-On 32x LTN-323 CD-rom IDE-2 Master
Maxtor 80GB 7200 RPM HDD (FAT32) IDE-2 Slave

Similar Messages

DVD Playback Issues with Dual Layer media

I have been using DVDSP for years now, and have rarely had any issues with burning my final projects to DVD. Any playback issues have usually been issues with players and +or-R media.
I have recently upgraded to a MacPro, and have been really stoked about being able to burn to Dual Layer media. My previous G5 didn't have a DL burner.
I have a large project that fills most the disk, and everything seems great in the software, and when playing the media files on the computer. But when I burn to disk, I have huge issues with playback on different DVD players, computers, etc. I have stuttering with menu's, freezing, and stuttering with playback of video.
I read that the issue could be because of the speed I'm burning at in DVDSP, so I saved as a disk image, and used disk utility to burn at a 4x speed. This seemed to help, but when I got to the end of the movie I had huge issues with stuttering/playback quality. So I burned another copy from the same disk image, and it wouldn't even play in my DVD player.
When I open the Video_TS folder from the DVDSP Build, and play right off my hard drive in the DVD software player, I don't have any of these issues.
So I'm guessing my problem is either my DVD media I'm using, or the burners on this new computer. I've burned DVD's on both burners (yes I have 2) and I still have the same problems.
I am using Memorex DVD+R DL and they are 8x.
Can anyone offer me some advice here. I really wish I could just hit burn and have a disk work. DL media isn't all that cheap and I don't know how many coasters I can make and keep my sanity.

I used compressor and I used the DVD: Best Quality 90 Minutes setting. The bit rate is avg 6.2 and maximum 7.7. And yes I used ac3 audio.
When you say lowest speeds possible... shouldn't a burner that says it burns at a speed work at that speed? I'm cool with burning at a lower speed to get this thing to work, but why have a burner that burns DVD DL at 8x speed, when it doesn't work? Shouldn't it work? Why is it that it won't work?
If I get Verbatim DVD+R DL, can I burn at 8x speed with those?
When I burn in disk utility I used the "varify burned data" and everything checks out ok. So why do I have this issue. Just curious.

DVD playback issue with Windows Media Player

Hi,
This isn't an Encore specific question, rather, a DVD playback one. Has anyone had issue playing their replicated DVDs in Windows Media Player? I truly believe it's the media player, not the DVD. When we put a DVD in the drive and try to open it in WMP, it jumps right to a video, or jumps directly to the last place we were in a video.... it's not defaulting to the main menu.
Has anyone experienced this? Is it a programming glitch on my DVD? I feel like it's a WMP issue, as it's only happening on certain computers.
thanks.

WMP has never been a good player for DVD's. At some point in the past, much of that functionality was disabled my MS, in hopes to reduce piracy. For some versions, no burned DVD would even play, though replicated/pressed DVD's were supposed to play fine.
I use CyberLink's PowerDVD and it is fine, even with my burned DVD's. The free MediaPlayer Classic HC plays my discs well too, with full menuing.
Good luck,
Hunt

DVD Drive issues with A700

Hi there!
              I am having problems with my DVD drive in my A700 machine. The drive is a Sony Optiarc DVD RW AD-7640S. When I put in in a disk I hear the drive spin but when I click to open the drive in My Computer it prompts to insert a disk and ejects the one in there, sometimes it will show two drives one as DVD and one as CD. I have tried many different types of disks as well as using the Lenovo Toolbox, which also asks me to insert a disk. I have removed the DVD drive in the device manager and reinstalled, the driver is listed as being Microsoft and up-to-date.
              I have not been able to locate a different driver for this device even off of Sony's website the product is not listed. I considered a possibilty of a bad lens and wanted to replace the drive but notice that there is a seperate eject button in the casing of my machine, powered from the board. This DVD drive has the eject button to the far right and most that I am finding are off-center. Has anyone experienced this issue and believe it to be a driver problem and know where to get a driver? Or if I need to replace the drive can I use any notebook SATA drive or does it have to be this model because of the button in the casing?
                        Any suggestions are appreciated!

hey kristin7522,
welcome to the forums.
i do find it weird that in My Computer it shows two optical drives when clearly you only have one and thus i would like you to get into device manager and uninstall the current driver for the DVD drive.
this should then prompt windows to install generic drivers, let it do so.
try again.
if this does not work, head over to http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=399423
check your system and if there is anything out of date; update it.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

SATA DVD RW issues with K8N Platinum

Hi
I have MSI K8N,(939-pin) Platinum-SLI, Mother Board (AMD 3200+, 1.25GB RAM, 80GB SATA HDD).
On my system I am facing trouble with SATA DVD- Writer (Samsung's 22x, S-223F/IDBH), as it can read all supported disks but unfortunately it is unable to write/burn CD/DVD in any format since I purchased this DVD writer . Surprisingly this very same DVD writer works perfectly with any other Intel's machine for both reading & writing functions.
"However the DVD writer with IDE cable works fine on my system without any change or any exclusive setting anywhere."
Following measures I have tried but failed to burn any disk with my SATA DVD writer
1. Reseted the BIOS to default/reset to factory setting.
a) Verified that both of the SATA controller were enabled.
b) Verified that RAID was Disabled.
2. Swaped & connected the DVD writer SATA cable to the port in which the HDD SATA cable was plugged in.
3. Repleced the complete DVD writer from Samsung Service Center.
4. Updated the Nero from 7.X to 8.X on the system
5. Tried to burn disks with other freeware disk burning tools. (e.g. "Burn Plus", "Burn free" etc).
6. No other Optical drive was attached.
7. Updated the firmware of DVD writer from samsung's service center.
In all the cases of attempting to burn disks, I found either of the following errors
Error Message 1
Invalid block address
Invalid write state
Could not perform EndTrack
Burn process failed
****************** OR *****************************
Error Message 2
Invalid block address
Writing short lead-out
Session fixation error
Burn process failed
Kindly help me to resolve the issue. :(
Thanks

Quote from: Scottike on 05-March-09, 10:24:41
You didn't mention if the DVD drive showed up in your bios. Look in "Standard CMOS Features" , you should have a list of all devices attached to the ide and sata ports.
you said the drive will play music, is the sound analog (through the small sound cable connected between JCD1 on your motherboard to the DVD drive, or are you getting sound digital (sound signal coming from the DVD through the sata cable)?
Is this a replacement DVD player, an upgrade from a CD player, or a brand new install?
Which Operating System are you using? In the past, I have had cd/dvd drives that some how got set up in the os only to play music and would not read or write data discs.
I fixed the problem by removing the cd/dvd drivers from the system and reinstalling.
I am using or have used LG, Sony, and Aopen BD/DVD/CD drives on this motherboard (K8N Neo2 Platinum).
"Ya Scottike , following are my observations
1. I 'm able to see all connected drives connected through sata ports (i.e. HDD & this DVD Writer) in BIOS under "Standard CMOS Features".
2. This DVD Writer is absolutely working fine for all reading functionality.
(It plays music are you getting sound digital (sound signal coming from the DVD through the sata cable)).
3. No Other Optical Drive is attached.
4. Currently Windows Vista Ultimate is installed.
Note: I have also tried with Windows XP + SP2 earlier on my system, its gives same error whenever tried to
burn any disk with this DVD writer.
5. This is a brand new DVD writer.
Hope I have answered all your queries. Please let me know what can I do to solve my purpose.
Thanks
"

DVD Sound issues with Siundblaster Audigy ADVANVED

Hi. I've searched endlessly through the net and this forum, but so far I havent found a resolution to my problem.
When I play DVDs I get very bad popping. Its identical for each DVD and makes watching a DVD on my PC unbearable. I dont have any problem playing music (any format) or video from the HDD, or audio CDs for that matter, but DVDs are aweful. I tried following the steps from a link in the "Read beofre you post" sticky, but no fix. Initially I thought it may be a problem with my DVD dri've, but I installed a second (3rd party) dri've and I get the same problem, which leads me to think its this ADVANCED MB software. The problem is the same in dedicated DVD software as well as Media Player.
I'm using a Dell Dimension 550 with Sound Blaster Audigy ADVANCED MB.
Any help would be appreciated.

BUMP

DVD mounting issue with new Pirates of Caribbean: at world's end DVD!

So I just picked up the new Pirates of Caribbean: at world's end DVD and was going to watch it on my MacBook (see specs below). and the DVD went in, the drive spun up a few times then ejected the disk. What's up? no error message or nothing. The Disney DVD support page says: "+If you have problems loading a DVD on a Mac, hold down the Command, Option, and I keys when inserting the disc. (This mounts the disc using ISO 9660 instead of UDF.)+" This must just be a Mac OS 9 shortcut (in OS X it just launches a "get info" box - same as Command i). It also says I might not have updated drivers, etc. But can it really be a driver issue?
any thoughts? ideas? help out there?
Thanks!

I think it's the disk. The fact that there are instructions regarding mounting issues specific to macs would tell me that they have had in the past problem complaints. Try it in your dvd player on your TV. Get another copy from the store and also get a copy of something else not Disney to see if that plays.

DVD/CD issue with windows 8.1 upgrade

I have a Pavillion G7 2270us notebook. I upgraded to Windows 8.1 from Windows 8.0. My DVD/CD drive no longer read any DVD nor CD. What can I do?

Hi,
Try the following.
Open windows Control Panel and open Device Manager. Expand DVD/CD-ROM Drives, then right click the drive and select Uninstall.
When done, download and reinstall the Chipset driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59647.exe
When complete, shut down the notebook by holding down the Shift key as you click Shutdown to temporarily prevent a hybrid boot. Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
As you boot into Windows, the optical drive will be reinstalled, but let windows fully load for a couple of minutes before checking.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Issue with GEAR Software CD/DVD Drivers + Windows Vista Beta 2 (build 5384)

I am using Windows Vista Beta 2 (Build 5384), and yes I know Vista is NOT officially supported by iTunes yet. However, iTunes installs and works ok for me, except that there is an issue with the GEAR Software drivers that it installs (used for cd burning and importing). The issue is that the driver (GEARAspiWDM.sys) is not compatible with Windows Vista. Normally this would not be an issue; I would just use a different program to create audio cd's. The issue is that the drive makes both my DVD-Rom and my DVD/CD-RW drive disappears (they are still listed in the device manager, but they have driver errors, code 39).
So I was wondering if anyone in Mac/Apple land knows of a way to disable/uninstall the GEAR drivers so I can still use iTunes?
And yes I did search the GEAR Software support page, but could not find an appropriate solution.
Thank you.
Chuck Stewart

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Hey guys, so I have a DVD stuck in the CD drive on my mac. It reads it as being in there, but I cannot eject it and it is causing my a lot of issues with my mac. If i try to eject it, Finder acts up and I have issues saving projects or even browsing files

hey guys, so I have a DVD stuck in the CD drive on my mac. It reads it as being in there, but I cannot eject it and it is causing my a lot of issues with my mac. If i try to eject it, Finder acts up and I have issues saving projects or even browsing files. I feel like it interferes with iPhoto as well because it says it is locked and I have no rights to view it. I wanted to see if anyone else had/s this issue and how you fixed it before lugging it into the apple store and being without a computer for a few weeks...

A few other suggestions here as well:
http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/

Can someone help me with a DVD burner issue on an HP Pavillion dv6700 series laptop?

Hello all. I have a HP Pavillion dv6700 laptop with a pioneer dvd rw k17b internal DVD burner drive. I recently have been experiencing issues with burning DVDs. It is saying that my burn speed is too low or the DVD is not compatible with the write speed of the burner and will not burn anything. I didn't have this problem until recently and it burned other DVDs fine until then. I have tried numerous brands of DVDs and none of them seem to work. I have also noticed that only the write speed of 2.4x shows in the drop down menu now...it had other options before. I have looked for firmware updates for the DVD burner and there isn't any. I have also checked device manager to make sure DMA was enabled and even tried uninstalling the driver and allowing windows to reinstall it upon reboot. I am running windows 7 operating system and have no clue what has happened to keep me from burning at a higher speed. I have also tried different burning software programs to see if I can get around it...no luck that way either. What has happened and how can I fix this? Any suggestions would be greatly appreciated! Thanks

Hello all. I have a HP Pavillion dv6700 laptop with a pioneer dvd rw k17b internal DVD burner drive. I recently have been experiencing issues with burning DVDs. It is saying that my burn speed is too low or the DVD is not compatible with the write speed of the burner and will not burn anything. I didn't have this problem until recently and it burned other DVDs fine until then. I have tried numerous brands of DVDs and none of them seem to work. I have also noticed that only the write speed of 2.4x shows in the drop down menu now...it had other options before. I have looked for firmware updates for the DVD burner and there isn't any. I have also checked device manager to make sure DMA was enabled and even tried uninstalling the driver and allowing windows to reinstall it upon reboot. I am running windows 7 operating system and have no clue what has happened to keep me from burning at a higher speed. I have also tried different burning software programs to see if I can get around it...no luck that way either. What has happened and how can I fix this? Any suggestions would be greatly appreciated! Thanks

I'm having the same registry issues with my CDROM, getting the warning when iTunes starts up. I've followed the article on how to add the upperFIlter to the registry and it solves the warning message but the DVD/CD writer disappears completely.

I'm having thet same registry issues with my CD-/DVD as is talked about in one of the fix articles I've found here. I added the UpperFilter entry to the registry since it was not there and restarted. This fixes the warning message but then there's no CD/DVD device shown at all in windows. I can put it back to normal and vice versa and get the same results, but I can't get this issue fixed. When I get the registry warning on starting iTunes, I can still rip from CDs and my DVD burner works just fine using other programs.
Any more ideas?

This fixes the warning message but then there's no CD/DVD device shown at all in windows.
That symptom suggests the afs.sys issue ... but there's some other things that might cause it too.
We'd better check to see if we can find what's going on.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Issues with Superdrive: OPTIARC DVD RW AD-5680H

So, while burning a DVD via DVDSP, I heard the disc STOP.... and then start back up again. Seven times in fact.
Checking it on an external player, I noticed it SKIPPED several times...
Locally trouble-shot, and burned to an external burner - no problems.
Anyone else having issues with this? This thing is brand new, had it less than a month.

Newer optical drives have a physical block to prevent insertion of a disk in a failed drive. You'll most likely need to have the drive replaced. The failures that trigger the "fence" to activate are, for the most psrt, not user-fixable.

Dynamic Link (Adobe Premiere Pro to Encore) issues with burning a DVD from the project file

Hello,
I am running Adobe Suite CS 5.1 on my Mac:
2.8 GHz Quad Core
6GB Memory
I've been having issues with a few projects; using Dynamic Link, directly from my project in Premier, to send them to Encore:
When attempting to burn a DVD, Encore will 'hang up' and not burn; I rarely burn to DVD, usually I'm always encoding for web, and just always use the 'default settings' in Encore.
A few things to note:
*In my project I'm using MOV files, from a Canon 7D, and MP4 files, from a Sony EX-1.
*I am working off of 3 separate hard drives; very large projects with over 5TBs of media files.
*I noticed that after inserting a DVD, it caused one of my hard drives to eject; this happened once, as far as I know.
*This only happens when I use Dynamic Link to send to Encore, via my Premiere Pro project file.
*My Project settings are always: XDCam HD-1080p/24p
Please help.
Thanks

So you must downrez at some point in the workflow. Some users have problems and/or think they get better quality out of direct PR/AME exports than using DL for this purpose.
I would test the workflow by creating three short test sequences - one with a clip from one camera, a second from the other, and a third with both in a sequence using the same settings you are using in your edit. I would use the "drag a clip" to the new item method for making each of the first two sequences. By short I mean 30 seconds to 2 minutes with a mixture of still and action.
Export using whatever method you pick of those recommended, but use CBR 8 instead of VBR etc. Bring the resulting files into Encore. Yes, look at the files exported on the computer, and look at Encore preview, etc, but also burn to a disk and watch on multiple TVs. There are lots of issues in best quality.

CDRW/DVD UDMA Issue with KT4VL

Similar Messages

Maybe you are looking for