CDS-18010 Error:A Index and a index with the same name

Hi
I am facing strange error is some one expert there to help me to get rid of this error.
CDS-18010 Error:A Index and a index with the same name 'LA_SP_FK_1' have been asked to be created.
I am generating tables from Data model diagram & getting this error.
Thanks,
Vijay

Your Right!!
Designer does not like 2 of the same name.
there are several bugs on the same name issue and CDS-18010
Bug.3973155/3443005 (92) CDS-18010 IN CAPTURING A TYPE WITH CONSTRUCTOR FUNTIONS IN ITS BODY:
Bug.2586582 (93) CDS-18010 A DOMAIN AND A DOMAIN WITH THE SAME NAME 'D1' BEEN ASKED TO CREATE:
Bug.2561625 (15) CDS-18010 GENERATION OF TWO SYNONYMS WITH SAME NAME BUT DIFFERENT SCOPE:
Bug.2072505 (93) CDS-18010 CAPTURING 2 TRIGGERS WITH SAME NAME ON ONE TABLE SHOULD BE A WARNING:
Bug.1689800 (90) CDS-18010 PLSQL WITH THE SAME PROCEDURE NAME ALREADY EXISTS:
Bug.1073311/1029997 (96) CDS-18010 ERROR ATTEMPTING TO CREATE 2 PROCEDURES WITH SAME NAME:
Just to name a few.
I would suggest you change the name.
Michael

Similar Messages

Dng and tif file with the same name, in the same Lightroom folder

If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?

If you can only see one of them, which one can you see?
Was the DNG and the TIF imported at the same time?
How are you trying to "access" the files?
The more details you can provide, the more likely it is that someone will be able to help you.

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Bridge copy and paste folders with the same name question

I just copied and pasted a folder named, as an example, "concerts" with a bunch of pictures to another drive with a folder with the same name.
I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. They are completely lost!

I choosed "substitute" when prompted and all the pics existing in old "concerts" folder have been deleted and replaced with just the new ones.
Are you on Windows? don't know the options you tell, I have three options (Mac) called: 'cancel', 'replace' and 'auto resolve' when dealing with one file and for multiple files it adds 'skip' to the list and has the option for 'apply all'
Replace does what it says, it replaces files and folders with the same name, auto resolve adds a (1) to the files or other number if more with same name are added.
So pasting a folder can't add files to the folder with the same name, but it completely replaces it. The other prompted option creates a "concerts (1)" new folder.
This is normal and wished behavior, you get a warning if names are the same and a choice to either overwrite them or add them with a new (different) filename.
Luckyly before moving files I always do a backup, so it's not a big issue, but I'm amazed by such behaviour. Also deleted pictures don't appear in the recycle bin. Completely lost!
Heard that before but can't replicate this, they always appear in the trash on my Mac.

Is it possible to have a calendar and reminder list with the same name?

I migrated from MobileMe to iCloud on the first day. MobileMe was then set up with my MacBook and so in iCal i saw my calendar events duplicated. I didn't like this so I tried deleting the MobileMe calendars first, then realised I couldn't delete all of them, it seemed that I must have one calendar. I then removed the the account setting (which would have been the smarter thing to do). A few hours later I notice that the calendars I deleted from MobileMe have been deleted from iCloud, as well as associated task/reminder lists. Luckily for me I made a backup before moving to iCloud so I've managed to recover my calendars.
My question is: Can I make a calendar and reminder list by the same name?
After the migration I did have some calendars and reminder lists by the same name eg. Work, Home.

T-Storm, I'm having the same annoying delay on my X-Fi Extreme Gamer card, it's driving me nuts trying to fix it.
I noticed that if I un-tick the Dolbly Digital Li've in the console it goes away, along with the 5. sound, %$*&^^&%!
Is it he same with you? Try un-ticking the DDL while playing something and see if it stops the delay or not. At least it will see if the problem is the card, the connection, the optical cable, or DDL itself.
Dolby Digital Li've works in real-time so I fear that is causing the delay rather then a bad cable or connection. But I don't know if others are getting the same delay or not, if it is DDL then everyone should be getting it.
But, if they are not trying to play a digital signal at the same time as a anolog one they might not notice it.

Two computers and two users with the same name. Can't copy files anymore...

Hi all, after a user migration to my new iMac I had to make a change of the shortname. I knew it was not a good idea but had no choice otherwise I had to wait other 3 hours to migrate data again...
Anyway, I managed to change my shortname with success, but one strange thing happened afterwards... I have two macs networked, both have an admin user with the same shortname/real name, 'gillo' (I followed the procedure in one of these two, the Intel iMac. The other, a Powerbook, was not modified).
While previously I had no problems in copying files from the user 'gillo' on the Powerbook TO the user 'gillo' on the iMac, after the shortname change I'm not anymore able to do it. The error I get is:
"The operation cannot be completed because you do not have sufficient privileges for some of the items"
Doesn't matter where I put the files, Desktop, Documents, even the Drop Box, I always get the same error.
I went through some checks and this is the 'log':
- The files/folders in the iMac 'gillo' directory are not locked.
- The files can be copied without troubles to the dirs of another admin user
- Permissions are the same as the other admin user and owner/group are the correct ones.
- Both Macs have 10.4.6
- The 'gillo' user on the iMac can copy files FROM the user 'gillo' on the Powerbook.
- I repaired permissions and the hard disk booting from the install DVD.
- I tried to change permissions of the directories (such as Desktop) on the iMac 'gillo' user allowing everybody to read/write. Also a no go.
Anybody went through this already? Or maybe something similar not directly related to the short name change?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

If i add two officially released and named albums with the same name, they keep compiling as one album. How to separate the tracks by artist??

I need immediate help. So here's the situation: Okay so I added an RHCP (Red Hot Chili Peppers) album that is named Greatest Hits on my iPod and I also added an The Offspring album also named Greatest Hits to my iPod and both tracks of the albums group as one. Any help please? Please please reply asap thanks in advance

This is a known bug, and you will see it in iTunes if you sort your library by Album name.
The workaround is as Mitch indicated, change one of the album names. However, you can simply append a space at the end of one of the albums so that it "looks" the same as the other, but will be treated differently because of the space.

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Bean property and public field found with the same name: getid

Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
[build.xml]
[work.jar]

In article <[email protected]>, lcl <[email protected]> wrote:
-=-=-=-=-=-
Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
-=-=-=-=-=-For better or worse the JAX-RPC spec requires this behavior. From
section 5.4.1:
"There is no standard mapping for the case when a JavaBean property
has the same name as a public field. A Java to XML mapping
implementation is required to flag this case as an error."
Since you are not the first person to run into this restriction I'm
beginning to think we need an option to bypass it.
--Scott

Lsmw error - no fields with the same name

Dear Experts,
I am trying to upload master data through LSMW through Standard Batch/Direct Input but when i am executing the step READ DATA it is throwing me error as
File 'C:\Documents and Settings\Guest\Desktop\DMS.TXT' and source structure 'ZEQUI_STRUTURE' have no fields with the same name.
Even though i cheked my flat file in notepad i used the following field for it
AEDAT
EQTYP
SHTXT
EQART
GROES
ERDAT
ANSDT
ANSWT
WAERS
HERST
HERLD
TYPBZ
BAUJJ
BAUMM
SERGE
SWERK
STORT
BEBER
GEWRK
ABCKZ
EQFNR
BUKRS
ANLNR
KOSTL
IWERK
INGRP
TPLNR
HEQUI
Regards,
Rip.
Edited by: Julius Bussche on Jan 20, 2009 11:04 AM
Please use meaningfull subject titles

Hi Ripel,
When you are assinging a file if it has field names in first row then select "Field names at Start of file", if not names then uncheck the box at "File Structure".
If fields are using, then check the tabulator in file and Uncheck the "Field order matches Source structure Definition."
Regards,
Sunil
Edited by: Sunil Reddy Sibbala on Jan 20, 2009 11:10 AM

Run the data copy and comments copy with the same key

I want to Run the data copy and comments copy with the same key.
I tried to challenge in the following way, but it is an error.
1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
2. Select the newly can process chain to add a package, make a change to the script as follows:
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%SELECTION_KEYDATE%,)
TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables?

Query 0: Runtime error There is already a line with the same key. with para

Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.

Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps!

Project Server 2010 and Report Builder 3 : the same name already exists

Hi,
I created my first report in Report Builder, and,
although it's not perfect, I tried to save it. But I get the error :
Impossible to save the report "No title.rdl". A file from another type with the same name already exists".
I tried to change the name 5 times but I always got the same error.
Any idea ?
Thanks

Hi WLID,
I have taken a sample test in my environment, it works well. If there is already another type file named “No title” on report server, then it can be saved on report server. If there is already a report named “No title” on report server, then it would prompt
that “An item named ‘http://servername/reportserver/foldername/No title’ already existed. Do you want to replace the existing item?” when we want to save the report in the same folder.
What’s the location that you want to save the report? Is it a report server or others? Could you please provide us more information about the issue? You can try to reopen the Report Builder, then create another simple report to text the issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

CDS-18010 Error:A Index and a index with the same name

Similar Messages

Maybe you are looking for