CDs eject without playing but DVDs work fine.

CDs eject without playing but DVDs work fine.  This is after installing Mavericks.

Reset the NVRAM/PRAM and Reset the SMC, then try again.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Similar Messages

  • Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
    I hope there is a fix for this, cause it *****!!!!

  • Music CDS no longer read and DVDs work fine?

    MAC NOW JUST EJECTS ALL MUSIC CD'S. DVD WILL PLAY BUT MUSIC WILL NOT. I'VE BEEN RIPPIN' MP3'S OFF OF THE DISK ON2 MY EXTERNAL HARD DRIVE. THEN NEXT THING I KNOW... IT STARTED SPITTIN' THEM BACK OUT. SOMETIMES IT WOULD DO IT 2 JUST 1 OR 2 AND I FIGURED THE DISK WAS MESSED UP OR SOMETHING. Please help

    This is a hardware issue. Likely your optical drive has failed.   Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

  • IMac G5 won't read any CDs but DVDs work fine

    I have an iMac G5 with a PIONEER DVD-RW DVR-K04L drive
    and firmware revision D441.
    Just recently it stopped accepting any CDs (commercial CDs, software CDs, blank CD-Rs). It buzzes and grinds and groans and then spits them back out, but refuses to mount them. The only exception is the Apple OX Installation CD that came with the machine - that one works without a hitch. DVDs play fine and I can burn to blank DVDs. The problem is only with CDs.
    I've tried suggestions from the forums:
    - reset PRAM and NVRAM
    - trashed com.apple.kernecaches, Extensions.kextcache, and CD Info.cidb and then rebooted
    - fixed permissions
    - verified disks
    Not sure what else to do - but I would appreciate any suggestions - since it reads the Apple installation CD, does this mean it's not a hardware problem but a software problem?

    You will need to take it
    to your local Apple Authorized Service Provider and
    have them take a look at it. Hopefully your iMac is
    still under warranty or AppleCare.
    Thanks for the reply.
    Is it possible to install a replacement unit on my own - or is this definitely not a do-it-yourself type fix? Also are there more reliable internal dual layer DVD/CD burners than the one the iMac G5 came with?
    If I decide to simply plug in an external burner, are the external burners compatible with iLife 06 (iDVD and iTunes)?
    Thanks.

  • My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

    My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • New project to DVD works fine, but sharing to a Blu ray fails, with a error message "video rendering error 60."  What is that and how do I fix it?

    getting an error message "video rendering error 60" when burning a new final cut pro project to Blu ray.  Burning to regular DVD works fine.  I have burned many other projects successfully to blu ray.  What is this message and how do I fix it?

    If this same timeline can be exported to other file formats and can be shared successfully to DVD, possibly it's the longer render time in the Blu Ray processing that is the problem. In the Finder in Applications, right click Final Cut Pro dot app, choose Get Info and verify that Prevent App Nap is checked. If it isn't, check it and try again.
    Russ

  • Dvd rom rejected .. dvds work fine

    Hello everyone i have a problem with my imac 21.5 inch (mid 2010)  everything works fine all be it a little slow starting up. i use my computer for making music on logic pro 9 and general web surfing ..
    when i watch the occasional dvd (originals not copies) the dvd works fine and loads using the built in dvd player ..
    my problem has been since the mavericks upgrade, so whenever i insert a dual layer DVDR from a computer music magazine that has always worked fine in the past, the disc tries to load for several seconds, spinning then stopping, spinning then stopping .. then ejects
    can anyone help with some troubleshooting please ? many thanks

    it worked fine after a few attempts of taking the dvdr out and outting back in.. then worked fine whenever i tried to load again later yesterday evening.
    then i try another music samples DVDR to retrieve samples from and i am experiencing the same thing again. this shoukdnt be happening. dvds work ok, music cds ok .. just dvdr

  • Mac Book / 10.5.2 ~ Keeps ejecting CD-R but DVD's seem okay.

    Hello there,
    My apologizes, I know that there are different threads throughout several discussions on this or something that may seem very similar but regrettable I have not been able to find a solution.
    I have a first generation Black MacBook running 10.5.2, I had a problem with my drive and in November Apple replaced it under apple care. Currently I have a :
    MATSHITA DVD-R UJ-857:
    Firmware Revision: HBEA
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media:
    Type: CD-R
    Blank: Yes
    Erasable: No
    Overwritable: Yes
    Appendable: Yes
    Write Speeds: 8x, 24x
    The problem has a few different elements:
    1. When I insert a CD-R disc that I know works (tried on a windows box), I get the standard Finder Message saying "You Inserted a blank CD. Choose an action from the pop-up menu or click Ignore." I click Eject and try again with the same result each time.
    2. When i try to record my own CD-r from a new spool it looks like it will burn but I get an error saying "... calibration problem . . ." and the disk fails.
    I have tried to reset my PRAM no luck
    I have tried to hold my MacBook upside down no Luck
    i have re-installed 10.5.2 combined update. no luck
    Checked the disk and permission . no luck.
    If you are able to offer any advice it would be greatly appreciated.
    Thank you in advance for you help and any reply you may offer.
    In Peace,
    -h

    Re: Mac Book / 10.5.2 ~ Keeps ejecting CD-R but DVD's seem okay.
    Posted: Mar 14, 2008 9:25 PM
    Did this happen right after you got it back from Apple?
    No it did not had burned over 50 disks before it began.. Started within the last 2 weeks. Cannot recall any particular change I made to the machine to prompt or trigger this.
    If so, you should of sent it back then.
    How long did you hold it upside down? The entire sequence.. Stated upside down. Put the disk in.. waited till i saw the Dialogue Box then turned it over in total about 10-15 Seconds.
    When you say tried to reset pram, did you successfully do this? I believe so. .The machine restarted and beeped then went over the inital start up chime again. So i bleive it was successful
    Did this start after you installed Leopard? I have only been using Leopard since I got the replacement drive. I thought 10.5.2 could have triggered it but no confirmation.
    What brand of disk are you using?
    Several including (imation, datawrite, princo) I know you will likely comment on the names of the disks. but i do not believe it to be the disks as even with the quality ones it is the same problem and when i place a burned disk in the drive it still thinks it is blank.
    Thanks again for the help.
    h

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • HT4600 i Get a solid amber light sometimes, bUT all works fine. I have to unplug the airport extreme to reset it and then it turns green and starys that way for a week or so and then turns back to amber. why is this and how do i fix it ?

    I gat a solid amber light once a week on my airport extreme, but all works fine. I have to unplug it to reset it and then the light turns back to green and it is good for another week and then it happens again. why is this and what can i do to fix it ?

    Solid amber on an AirPort Extreme is an indication that the internal power supply is starting to act up.
    If the AirPort Extreme is in warranty, it shouid be exchanged for another AirPort Extreme.
    If the AirPort Extreme is several years old, keep any eye on things. When/if you find that you are having to reset the device several times a week, it's time to start thinking about a replacement device, as the end is near.

  • ITunes wont download the restoring software for my itouch it gets finished and gives me an error message that says the network conection timed out but it works fine what do i do?

    i tunes wont download itouch restoring sotware it gets finished and gives me an error message saying the network conection timed out but its working fine what do i do?

    I have this same problem, i though it was my internet (super slow) it would take 3 HOURS!! to download the update and then after all the waiting, it would say "network connection timed out" Ive restarted it and checked my settings over and over but it still says "timed out" wat should I do?!?

  • I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

    I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

    That issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies

  • After configuring SSL, cannot run Report Manager but ReportServer works fine

    I'm using SSRS 2014 as part of SQL Server 2014 Express. I've configured both the Web Service URL and the Report Manager URL to use a Certificate and only allow port 443 traffic. I did this by removing the port 80 identity and adding an SSL Identity.
    All is working well for https://myserver.com/ReportServer. But when I try and access report manager, I get the following error when running remote:
    The underlying connection was closed: Could not
    establish trust relationship for the SSL/TLS secure channel.
    When running directly on the server, the server, it just rejects my passwords and asks for it again.
    If I remove the SSL Indentity and add back in port 80, it works fine over https.
    Any ideas of what might be causing this problem?
    Thanks,
    Glenn
    Please mark this post as Answered if it solved your problem, otherwise you can click Vote if it helped you out. -Glenn Thimmes

    Hi Glenn,
    Per my understanding that you have added an SSL Identity and you got some errors "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel." when you logging remotely to the report manager,
    but which work fine when login report server, and it also asked for credential when you login report manager locally, right?
    The issue can be caused by many factors. Please check below points one by one to help you clarify:
    In rsreportserver.config file(Path like this:C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer), ensure that SecureConnectionLevel is set to the value 2 or 3. If disable the SSL value is set to 0.  Corrected
    line in your rsreportserver.confiog file should look like:
    <Add Key="SecureConnectionLevel" Value="3"/>
     In rsreportserver.config, add the correct value to the <URLRoot> element. the ReportServerUrl value must be the name of the server that is registered for that certificate. with a hostname that is valid for your certificate. For example, if the
    certificate is registered to https://adventure-works.com.onlinesales, the report server URL would be
    https://adventure-works.com.onlinesales/reportserver.
    <UrlRoot>
    https://adventure-works.com.onlinesales/reportserver.
    </UrlRoot>
    Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine.
    http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/ 
    This is very important. In rsreportserver.config file, add the same value to the <ReportServerUrl> element the same as that you added in step 2. 
    <ReportServerUrl>
    https://adventure-works.com.onlinesales/reportserver.
    </ReportServerUrl>
    Then restart your report server (stop & then start in Report Server Configuration Manager).
    Article related to this issue also contain the troubleshooting for your reference:
    http://msdn.microsoft.com/en-us/library/ms345223(v=sql.100).aspx
    Similar threads for your reference:
    Could not establish trust relationship for the SSL/TLS secure
    channel
    SSRS 2008- Underlying connection
    was closed – could not establish trust relationship for SSL/TLS
    If your problem still exists, please try to provide us snapshopt about the setting for the SSL Identity and also the Report Manager URL,etc.
    Regards
    Vicky Liu

  • Cant hear audio , text tone, keyboard tone without headphone but ringer is fine in iphone 4

    Cant hear audio , text tone, keyboard tone without headphone but ringer is fine in iphone 4

    Hi Nik 123,
    Welcome to the Apple Support Communities!
    I understand that it can be frustrating when the sound on your iPhone is not behaving as expected. In this situation I would recommend using the troubleshooting steps provided in the attached article. 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Cheers,
    Joe

  • HT1444 FaceTime calling FaceTime can't hear me when talking but can hear them on macbook pro  but using FaceTime iPhone works good family has mac pro same but it works fine

    face time on mac book pro 15.5 cant hear me talking but can hear them family has same computer but it works fine facetime on Iphone works good to    

    Does your mic work in System Preferences?
    System Preferences > Sound > Input
    There is an Input Level meter that should light up when you talk. Just to make sure your mic and Mac are working.
    Which mic are you using? Are  you using the built in mic on an Apple Display? I have Apple's LED display and every time I use Facetime, as in place or take a call, the mic input volume gets reset to a level so low, people can't hear me. I have to manually raise the mic volume back to where I had set it. When I end the call, Facetime resets the volume back to where I set it. If I don't reset the mic volume level on each and every call, people can't hear me.
    I called Apple on this. They downloaded a log file tool to my Mac and took some logs. Then they called me back and said this works as designed. Incredible.
    So, if you are using Apple's LED display, this may be your problem. Note that the mic volume level gets set low and reset back only during a call. If you check it before a call and then after a call, it looks fine as if nothing changed. Open up the Sound prefernces and watch it get reset in real time.

Maybe you are looking for