CDs with multiple artists are added to the library multiple times I want to be able to add the artwork to all.

CDs with multiple artists are added to the library multiple times. Usually one has the artwork. I want to add the artwork to the others.  The instructions are inaccurate. I tried it several ways and it does not work.  How do I add the artwork shown on one of the albums to the other albums (same album, different artists)?

Try Ethernet over Power adapters.. these are very popular for your kind of environment.. being able to make non-wireless link to another area where you can setup a wireless access point.
Airport Express are not great for wireless power.. if you really have issues with wireless strength in a bad environment apple stuff is not the way to go.
The comparison chart here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
This is their worst test location you can also see averages.. the latest airport extreme.. is there a long way down.. and that is a much better wireless device than Airport Express.
The Ubiquiti power AP is small cheap and designed for precisely this duty.. useless in an apple wireless network.. you will need to run ethernet or EOP adapters back to the main router.. but if the normal omni directional antennas don't provide enough signal you can get directional ones.. I suspect you can cover your whole apartment with a pair of these and high gain directional antenna.

Similar Messages

  • One of the computers that had our Itunes account on it crashed. We want to be able to add the account to our new computers and future computers but it shows that we have used 4 of 5 computers. Once we hit 5 are we out of luck or do they revolve?

    One of the computers that had our Itunes account on it crashed. We want to be able to add the account to our new computers and future computers but it shows that we have used 4 of 5 computers. Once we hit 5 are we out of luck or do they revolve? Like putting on number 6 will delete number 1?

    Authorise / Deauthorise About
    http://support.apple.com/kb/HT1420
    shendricks11 wrote:
    ... Once we hit 5 are we out of luck or do they revolve? Like putting on number 6 will delete number 1?
    This is not how it works.
    You can only have a maximum of 5 computers Authorised at any one time.
    If you no longer have, or access to, the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store, deauthorise all five,
    (Please Note: this can only be done Once every 12 months)
    Then re-authorize your current Computer(s) one at a time.

  • How do I "save tabs and quit" in this new version of Firefox, as I did in the older version? I want to be able to see the same websites open from the last time I closed the computer.

    In an earlier version of Firefox, when I went to close it, I would get a prompt "save tabs and quit?" that allowed me to see the same websites open from the last time I closed the computer. Where is that feature on the new version of Firefox?

    Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
    Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs.<br />
    You can use "History > Restore Previous Session" to get the previous session at any time.<br />
    You may need to click the orange/gray Firefox button to see History.<br />
    There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
    Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
    * [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • I have a MacBook and cannot connect to App Store. I have no problem with the internet connection. I want to be able to buy the apps that are available for my computer. The date, time and location are all correct - all the suggestions have failed

    I have a MacBook - I am unable to connect to App Store - I have no problems using the internet to connect to anything else. I have checked out all the suggestions - Apple Preference and time, date, location etc. they are all correct. I cannot think what else I should do. Any suggestions please Cynthiafromgrayshott.

    If you don't see any messages, not have anti-malware running or the Firewall on, try installing the Mac OS X 10.6.8 Update Combo
    It's ok to do this even though you are already running v10.6.8 (according to your profile).
    Restart your Mac after the combo in installed, try the App Store.
    Also... if you have an app called Little Snitch installed, that can prevent a connection to the App Store.

  • How can i add subtitles to a movie I have already purchased in the itunes Store? I want to be able to add french subtitles to the already English movie.

    hellpppp meee i just want french subtitles so when i watch the movie with my french friend, she'll understand!! thanks

    Go to iTunes prefs>Playback - from the drop down menu select your language.
    You will see sub-titles if the media is programed with sub-titles. Not all content has sub-titles.
    MJ

  • The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

    The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
    The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

    Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
    Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
    Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

  • I have elements 8 and I want to be able to load the same picture in multiple times because

    Question - I have photoshop elements 8 and I want to be able to load the same picture in multiple times because I have 1200 pictures already pregrouped into 60 file categories and some pictures are duplicated thruout these files. How can I get elements 8 to load the duplicates  - it currently seems to default to only loading the picture one time and not allowing duplicates

    The apple lightning to 30 pin works just fine for me.
    Works with a fio amp and srs  iwow.

  • I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

    I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
    In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
    <B>DESCRIPTIONS</B>:
    This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
    <B>INSTRUCTIONS</B>:
    1. Run the VI.
    2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
    <B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
    3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
    4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
    <B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
    1. SVL Scale Voltage to EU.vi
    2. OAT Digital Tacho Process.vi
    3. OAT Get Even Angle Reference.vi
    4. OAT Convert to Even Angle Signal.vi
    5. OAT Compensate Even Angle Signal.vi
    My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
    Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
    Solved!
    Go to Solution.

    Hi CracKatoA.
    Take a look at the link bellow:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
    Regards,
    Filipe Silva

  • I have realised over time I have created multiple accounts. I have bought music on my iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone to help.

    I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know  how to contact someone in Itune to help me.  PLEASE

    I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
    You might find help on the vendors website: http://www.nfinityinc.com/index.html

  • I write in greek as well as english on my mac (osx mountain lion) problem is, there is no spell checking on pages, and yes, i have added a greek dictionary in the library spelling folder. and i can also select it from the inspector. what's wrong?

    I write in greek as well as english on my mac (osx mountain lion) problem is, there is no spell checking on pages, and yes, i have added a greek dictionary in the library spelling folder. and i can also select it from the inspector. what's wrong?

    You need to give more details:
    1. What version of Pages?
    2. Where did you get the Greek dictionary from and exactly how did you install it?
    3. Are you applying the language to your text?
    Peter

  • My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

    My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

    Hello Sandra,
    The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
    Mac OS X 10.6: Recovering items using Time Machine and Spotlight
    http://support.apple.com/kb/PH6379
    Sincerely,
    Allen

  • I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?

    I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?
    I was a kid when I made a documentary for a school project. I've been trying to figure out how to retrieve the file. 4 years ago, I was able to get the files off the Iomega Zip drive (finally), but I now see the file is saved as a .A4P. There is also a file saved as a .PKG as well, but I don't know how to open this with my Windows 8 COmputer.

    .a4p is an Authorware v.4 (Windows) project.
    Interesting you have it as a .pkg...usually that's a published-on-a- Mac extension, if I recall.
    At any rate, can you put the file up on a Box, Dropbox, FTP, etc...and send me a URL?
    I should be able to published it so you can view the project (it would be an .exe).
    It can't be converted to anything though - not without manual effort.

  • I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY WUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ??

    I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY QUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM .I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ?? HOW IT IS ??

    Hi Kishore,
    First identify deleted records by selecting "Detect deleted rows from comparison table" feature in Table Comparison
    Then Use Map Operation with Input row type as "delete" and output row type as "delete" to delete records from target table.

  • Itunes is not picking up the library on my external hard drive although I have mapped the drive in preferences? Can anyone help please? Thank you.

    Hi,
    I have been rebuilding our iTunes library on a external hard drive, no problems to start with.  The pc crashed the other day and I lost some of the files.
    I can see the music files on the external hard drive, but I haven't been able to get iTunes to pick them up as being the library despite following the instructions to map the drive under 'preferences' in iTunes.  I have added new songs, these are being saved in the folder on the external hard drive and are showing in the library pane on iTunes, any suggestions how I can get the other files to show in the library? Would be very grateful for any help! Thank you.

    The fix for the exclamation marks is: Adobe Lightroom - Find moved or missing files and folders
    The proper way to use backups is to restore the photos to their original location, but you probably don't want to do that as you said your old hard disk was almost full. Thus, the solution given above will solve the problem.

  • I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages).....  Do the following have free copyright

    I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
    The question I need answered is ( and not able to find the answer on any of you help pages).....
    Do the following have free copyright to publish on facebook and U Tube?
    1.Garage band sounds?
    2.Slide show...Sample music and Theme music?
    3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
    I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
    It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
    I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

    Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Maybe you are looking for