CE-500 and multiple MAC adressess per port?

Hi,
I have CE-500. There are users which have IP phones with atached desktop PCs. So their ports have role Desktop+IP phone. Security is set to low, so for each port there can be 3 MAC addresses.
Some users are running VMWare which creating additional MAC addresses at this port. CE-500 after some time generates error message about attack and dissables that new MAC addresses to access network.
But I did not find way how to disable MAC address count check.
I tried to change role of this port but none other than Desktop+IP phone has voice vlan settins.
Does anyone know how to solve it?

Why do you want to disable MAC address count?. It is a security feature in this. If you want some more mac addresses, then in crease swirchport port-security maximum .
Or else, I would suggest you to provide static Mac address allocation to that port.

Similar Messages

  • Using external NAS drive for Time Machine and multiple Macs

    I just installed an external NAS drive from OWC's sister company Newer Tech. It is 500g with ethernet and usb2.0 connections. It works very well with easy setup with Time Machine with no hassle.
    However, in very fine print that I missed in the ad, it supports 20 computers but not for Mac only for PC. OWC customer service said I could return it but I'll keep it anyway since it works well but only for one computer at a time in read/write mode.
    Anyone know of a way around this? Are there any drivers from other vendors that would allow this to be used with the multiple Macs on my home network?

    Very doubtful, but even if there is a workaround, you do not want to take that kind of risk with your backups.
    See the pink and yellow boxes in #2 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

  • Port addressing and restricted MACs to a port Cisco Catalyst 1900

    Hi, to everyone I want to ask if there is a method or documentation to guide me throught to give restricted mac or macs to a port via snmp. What are the OIDs and method? Any information would be helpful. Thanks in advance.

    Thank you for your reply. So, you mean that I can do this via SNMP? What are the OIDs or the MIB? Is there any available documentation on how to do that?

  • Itunes and multiple macs

    I presently have two Macs and can't seem to figure out how to sync Itunes. Can't it be done (sure hope so) and if so how? Thanks

    Try posting in the iTunes for Mac forum. You'll be more likely to get help there than you will here in the iTunes for Windows forum.
    Good luck.

  • Aperture and multiple Macs

    We're two users that have have one iMac and three MacBooks, one Pro, one regular and one Air.
    Thanks to the very useful tips provided in this magnificent forum, we've managed to consolidate our two iPhoto libraries and migrate them over to Aperture. We're now having a rather large single Aperture "master" library on our iMac. This is also the place where we do all our image imports and editing.
    What I'm looking for is practical experiences to get a subset of images from our iMac to our MacBooks, both for viewing on the road as well as to sync with a variety of iOS devices. Note that there's no need to do editing on the MacBooks, so it's a one way transfer only.
    What I've been looking at until now:
    Obviously MobileMe galleries are an option and I do hope these survive in Steve's future iCloud.
    Put images to share in a dedicated folder and export this as a separate Aperture library. Disadvantage is that Aperture runs rather slow on our regular MacBook and MacBook Air.
    Transfer Aperture images to an iPhoto library. Disadvantage is that for example slide shows cannot be exported this way.
    Love to hear what other forum members do in real life.
    Many thanks,
    Eric

    Hi Eric --
    EVO67 wrote:
    What I've been looking at until now:
    Put images to share in a dedicated folder and export this as a separate Aperture library. Disadvantage is that Aperture runs rather slow on our regular MacBook and MacBook Air.
    Does it still run slowly in Quick Preview mode?  Quick Preview loads only the Previews of images, and does not read or load the Master + Version.  It's designed to improve performance during quick reviewing, keywording, etc.
    This has the advantage of giving you the Aperture interface, with which you are familiar.  And should the need arise, you could always merge back an adjusted or otherwise altered image.
    The only other thing that comes to mind is one of the many alternatives to MobileMe -- something which allows you to host a on-line gallery of images.  The disadvantages there are: must have on-line access; cost; maintenance.

  • How do i sync iphone with multiple macs? and few questions

    Hi
    I would appreciate if anyone would help me.
    1. I would like to know how to sync my iphone with different macs. I have a macbook 13 and a macbook 15 and would like to use BOTH to be able to transfer data without losing them. (address, apps, photos and music)
    would like to use this feature if I were to be suddenly on a trip and a friend would like to share some of his files (audio, apps, photos..etc)
    2. is it possible to use internet tethering on multiple macs or example a "spontanious" mac? (ex. if I were suddenly to use internet through usb on a friends mac while we were on a trip but it were programmed on my mac at home)
    3. my internet tethering is only working on one mac which I usually use to sync everything... i tried just using tethering through usb on the other mac wihtout any sync but somehow it didnt work... usually i just plug and play and start using firefox... by automatic detection...
    4. is there also a way to copy files from iphone onto a mac which would not be one of my libraries?
    5. why cant i use iphone like the ipod as a disk use?
    I am aware that these things are somewhat possible because i have read quiet a few artivles but they are sadly enough not so current... any help appreciated.

    #1: As has been said, you can't get around it. An iPhone cannot be synched to more than one computer for any media content (it can be for contacts and calendar information, I believe).
    #4: You can transfer items purchased from the iTunes Store to another computer but only if you disallow synchronization and authorize that computer to your iTunes Store account. There are third-party utilities that can transfer non-iTunes Store content.
    #5: there is no disk mode in an iPhone and no way to enable one, at least not in the sense of disk mode in earlier iPods. There are third-party apps that allow some file transfer to and from an iPhone.
    I can't help with tethering questions.

  • Back to My Mac and multiple iCloud accounts

    I have an iMac at home and a Macbook I travel with.  Previously I had just one mobileme account, and BTMM has worked like a champ.  I now have multiple iCloud accounts in my household, as my wife mostly uses the iMac and I have the macbook.  I very much enjoy the seemless sharing of iCal calendars and the syncing of email accounts over multiple macs and mobile devices.  Trouble is to make BTMM work you have to enter preferences-->iCloud and log both computers into the same iCould account.  Surely apple must have forseen this sort of problem.  I as an indivdual if you have TWO computers and no one else uses them, it's no big deal to have everything on one iCloud account.  But with multiple users, with multiple email accounts, that's just not realistic.  I thought I may have found the work around when going to System Prefs-->Users & Groups-->and adding multilple Apple User IDs, but that doesn't work.
    Any one else frustrated with this?  Similar issues with Photo Stream, it would be nice to view other photo streams.  Anybody got any ideas?  Other than logging out of my iCloud account when away....getting all the warnings about deleting stuff off my mac with regard to iCloud..... and logging into my wifes iCloud account?
    thanks
    x

    I share this frustration. Over last weekend I needed to leave my computer at home while we went across the country to visit family. I found out there I needed to access my computer and finish an item before I was to return. We brought my wife's MBAir with us just in case, and good thing too. Either way, I was required to sign out of iCloud for her, then sign in as myself. This deleted all her iCloud contacts, calendar, mail, etc. Then it had to reload mine, then when finished i had to do that process all over again for her account. It would seem a quite simple task to allow multiple iCloud accounts to view a set of computers set to any of the iCloud Apple ID's. There is a function similar to this on my TimeCapsule. I can put both of our AppleID accounts onto that device and both of us can see our TimeCapsule and all attached storage while away from home (brilliant by the way), great for accessing movies I have stored on the TimeCapsule. Any results on how to make this work? Thanks

  • I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.

    I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.

    If you use the same Apple ID for iCloud on each device, yes. However, you can use the same Apple ID for iTunes content on each device, but different Apple ID's for iCloud, iMessage, FaceTime, etc., on each device. That way, you can have whatever iTunes content you want on each phone, but keep all of the other data separate. You can create another Apple ID here:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
    Must be a verified email address.

  • MobileMe and working on a site between multiple Macs

    In an article I was reading, the following was noted:
    iDisk balks at file packages like iWeb's Domain.sites2 file, making it +difficult for MobileMe users to work on an iWeb site between multiple Macs+.
    Does that mean working at the same time? Or, if for example I'm doing my site on my personal iMac, and then went to college or wanted to work on a MacBook for instance, cannot I complete working on my site through MobileMe?
    I may not be getting it clear.
    Thanks.

    if for example I'm doing my site on my personal iMac, and then went to college or wanted to work on a MacBook for instance, cannot I complete working on my site through MobileMe?
    The point is that to work on an iWeb site with two computers, both must have a copy of the Domain file. There are various ways to do that, like using a memory stick or Dropbox. But uploading and downloading from MobileMe is most likely not practical.

  • Windows 2008 Server contacting multiple public IP on port 80 and 443

    Windows 2008 Server contacting multiple public IP on port 80 and 443
    Source : Microsoft Lync 2010
    Port : 80
    Destination : unknown.prolexic.com
    Source : Internet Explorer
    Port : 80
    Destination :a-0001.a-msedge.net
    Source : Internet Explorer
    Port : 443
    Destination :204.79.197.200
    Is this virus? how to stop the same?

    Org name of the IP shows Microsoft Corporation
    Since its hits on firewall , i will have to stop the same 
    but not sure for what its being contacted to these Ips
    OrgName:        Microsoft Corporation

  • Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

    Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

    Using USB 3 devices on Mac computers FAQ

  • FAcing problems in configuring multiple macs(imac and mac book) pro) on time capsule

    FAcing problems in configuring multiple macs(imac and mac book)

    You may find these links useful:
    http://pondini.org/TM/Time_Capsule.html
    http://pondini.org/TM/4.html
    Ciao.

  • There are multiple MAC's in my house and I am considering buying Time Capsule to use as a file sharing device. Is anyone doing this? Pros/Cons?

    I have multiple MAC's in my house. I would like to create a file server environmet. I am considering using Time Capsule. Is anyone doing this? Pros/Cons?

    The Linksys should be about as fast as the Time Capsule. So you might as well connect the Time Capsule to the Linksys, disable sharing and wireless.
    Solution two is to use the TC as the router, wireless and network drive. This would save the power the Linksys needs. What is the Linksys connected to? a separate modem?

  • Can I use accounts in the Airport Utility to keep backup from multiple macs separate and separate?

    Can I use accounts in the Airport Utility to keep backup from multiple macs separate and separate?

    Backups from multiple Macs are always kept separate. Each Mac TM will create its own sparsebundle and will not interfere with others.
    Using the accounts in AU will simply make each sparsebundle only accessible to that user.. ie it is a purely a security measure.. that is so weak as to be useless .. anyone can bypass it by pressing the reset for 1sec.
    And what it will do is cut off everyone from their existing backups.. you will be warned when you set it up that what is about to happen may not be 100% goodness.. pay attention.. it is not.

  • I had multiple copies of the library and i tried to move 1 to trash and now i have broken icon and my mac won't boot up any more can i fix this from home or do I need to go to the genius bar?

    I had multiple copies of the library and i tried to move 1 to trash and now i have broken icon and my mac won't boot up any more can i fix this from home or do I need to go to the genius bar?

    Go to the genius bar. You've mucked up your MBP OS and it requires a hands on repair.

Maybe you are looking for

  • Crystal Reports - OLE image maintain correct proportions

    I'm using a CR 2008 to report off of a Oracle database.  The report consists of a three images per page.  The image comes from an OLE object which shows the image dynamically from an image path field as the graphic location.  My images are not all th

  • DBAdapter Logical Delete Polling 에서 CustomSql 관련 문의

    DB Polling시에 SELECT해오는 쿼리에서.. 프로시저 수행하는 SQL문을 추가.. 동시에 1) 프로시저 호출 수행 후 COMMIT 2) SELECT(DB Polling)을 수행. 수행방법- Custom SQL에서 원래 SELECT 되는 문장에서 위에 프로시져 호출 수행하는 구문을 넣고 COMMIT과 함께 수정. TopLink.xml 반영됐는지 확인했습니다. activision으로 Log를 확인해 본결과.. 예전 폴링시에 나오는 SELE

  • Corrupt....

    My ipod been corrupt for a while it happened randomly when I plugged it in and Ive done the five rs and all that junk but it still wont work its not even in color anymore all the "Do not disconnect" and the loading thing is all in black and white and

  • How do I contact apple for a replacement macbook?

    I have had a series of problems with my macbook and two repairs later I am still having issues. My computer would sporadically lose contact with the wifi, unable to load the internet despite having 'full bars', whilst my phone and iPad could both con

  • Anyone know how to make a QT .mpg? (mpeg2 with sound)

    I have a gig making QT file for this display that plays from a flash card, it just loops the content on the card but it needs a .mpg(mpeg2 file with sound) I can not seem to figure out hoe to make this kind of file. Compressor only makes m2v files an