CE-507 with ACNS 4.1.1 killing the network !

I have sme CE-507 content engines running 4.1.1 ACNS code in transparent cache mode. Config below.
I am wccp'ing from a 2600 router using " ip wccp web-cache redirect in".
On the router I also have
no ip source-route
ip wccp web-cache
ip wccp 90
ip wccp 91
Packets are forwarded to the cache engine but are then lost.
As soon as wccp comes up all HTTP traffic dies ( even ports that I have not specified in the port-list).
Has anyone seen this before ??
wccp router-list 1 10.10.10.1
wccp port-list 2 "http ports"
wccp port-list 3 "more http ports"
wccp web-cache router-list-num 1
wccp service-number 90 router-list-num 1 port-list-num 2 application cache
wccp service-number 91 router-list-num 1 port-list-num 3 application cache
wccp version 2

This problem has been fixed.
When using wccp redirect inbound - ip route-cache same-interface command must be on the ethernet side of the router where the CE is .

Similar Messages

Hyper V file transfer kills the network

Dear All,
We have 4 Hyper V VM installations on 2 HP DL 380 G8 servers and have they are connected to HP NSA 2040 SAN Storage through 6 Gbps Fibre channel. The physical machines are clustered.
Out of the 4, 2 are Clustered Hyper V's running Microsoft Dynamics AX 2012 R3 and we have 2 Clustered Hyper V for Database server running MS SQL 2012 R2.
The issue here is that the APP servers are slow in communicating with the DB server. The Hyper V's have a dedicated 4 * 1Gbps interface cards teamed and the packets are getting timed out. But from any other machine in the subnet the communications are proper.
When ever i try to copy a file from the DB server to the APP server using SMB share it kills my network, the copy will happen but after the copy is completed the network comes backup.
Its strange scenario. APP server 2 APP server smb copy is fine, and from DB to DB smb copy is fine but cannot copy between them.
Can anyone please help?
Thanks,
Sriram A Das

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Hyper-V forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HT4623 help with iOS7 how do you kill the programs that you visit on your phone to save the battery life?

how to kill programs with IOS7 that you visit on your iphone to save the battery?

Double tap Home button, swipe the app UP to delete from multitask-list.

Can I configure a wireless home network with two cable routers (both with separate connections to the same cable company)? Issue is poor signal strength even with multiple Airport Expresses added to the network.

I have a wireless home network consisting of a time capsule, two airport expresses and a cable modem. Even with this configuration I get a very weak signal in much of be condo - the walls, etc. are solid concrete. I want to see if I can add another separately connected cable modem and connect one of the existing airport express to it by Ethernet cable. If so, this would give me two wired hubs and greatly improve signal strength. I do not know if this configuration will in fact work or if I will just wind up with two, separate and unrelateable networks. Unfortunately, there is no way to run any additional Ethernet cable and I doubt simply adding more Airport Express will help. Thanks.

Try Ethernet over Power adapters.. these are very popular for your kind of environment.. being able to make non-wireless link to another area where you can setup a wireless access point.
Airport Express are not great for wireless power.. if you really have issues with wireless strength in a bad environment apple stuff is not the way to go.
The comparison chart here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
This is their worst test location you can also see averages.. the latest airport extreme.. is there a long way down.. and that is a much better wireless device than Airport Express.
The Ubiquiti power AP is small cheap and designed for precisely this duty.. useless in an apple wireless network.. you will need to run ethernet or EOP adapters back to the main router.. but if the normal omni directional antennas don't provide enough signal you can get directional ones.. I suspect you can cover your whole apartment with a pair of these and high gain directional antenna.

Outlook strange behavior with error 0x800CCC13 Cannot connect to the network. Verify your network connection or modem

Hi guys,
I am having a strange behavior in my environment. We are running Exchange 2010 with Outlook 2007 for client access. Some of these clients needs to access some pop3 accounts from diferent vendors.
About 2 weeks ago, we start getting error Ox800CCC13 (as described above) when users try to send email through their pop3 accounts in Outlook. This only happens to about 5 out of 100 users. I have removed the pop3 account and readded it. I was able to send
just one email out then issue was back.
Next, I tried sending out simple text message with no attachment. No luck. However, I noticed when I remove the signature (10 kb gif image) I was able to send out a few emails. However, issue is back with or without signature.
For more testing, I added Mozilla Thunderbird client for the pop3 account with no exchange account and so far no error. Emails are sending out fine. I would appreciate any insight please.

Hi,
This problem may occur if the Outlook 2007 client computer does not have a default gateway configured.
For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.To
add this DWORD value yourself, follow these steps.
Outlook 2007
1.
Click Start, click Run, type regedit in the Open box, and then click OK.
2.
Locate and then click the following subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC
3.
On the Edit menu, point to New, and then click DWORD Value.
4.
Type DefConnectOpts, and then press ENTER.
5.
Right-click DefConnectOpts, and then click Modify.
6.
In the Value data box, type 0, and then click OK.
7.
Exit Registry Editor.
Sincerely
Harry

Can i use my iphone with any carrier that is on the network selection

if i find wind and mobilicity on my network selction does that mean i can use my phone with those carriers?

Hi(Bonjour)!
Yes, but according tou the user licence you have to unsintall the copy on your G5 prior to use it on intel Mac.
Michel Boissonneault

Kill the Network Stalling popup!!!

Does anyone know how to stop iTunes from throwing up the "Network Stalled" popup? It’s absolutely, completely, and infinitely infuriating. I simply don't care if the network is having an issue. I especially don't want a popup coming up randomly while I’m trying to do other more important things….like work. I loose window focus on what I’m working on and either have to wait for the window to close or grab my mouse to click back on what I was doing. All the while I’ve lost my place and wasted time on something I can’t change or fix. And, to add insult to injury, when the window comes up, the specific focus is on the “Stop” button. Therefore, if I’m typing and the window pops up before I can stop, my key presses cause the “Stop” button to be clicked and iTunes stops playing. It would be fine if the message displayed in any of the iTunes status message areas within the application. But, it’s completely pointless and counterproductive for anyone to endure the current behavior.

As an addendum to this post, hopefully Tech staff gets messages from this forum: ANYTIME iTunes has a dialog box it Steals the Window Focus. This should only happen when a severe error will affect the entire computer. I have had multiple dialog boxes dismissed without being read becuase I was typing along and iTunes stole the window focus and the space bar dismissed a box before I knew what happened. I then had to use the mouse to go back to the application where I was actually getting some work done. Please fix this in the next release!

Chat SSDP Discovery flooding network killing all networking

I am having a huge issue with the latest version of iChat. When I start it up it sends out 10,000 to 20,000 SSDP requests to 239.255.255.250. If I shut down iChat it continues for about a minute then stops and everything is back to normal. Tried changing the ports.
We are using NAT on a Windows 2003 server.
This kills the network and no other network traffic happens.
When I run iChat at home it all works fine, without a problem. It is only when I am in the office.
My office setup is DHCP from a Windows 2003 R2 x64 server and all network traffic is routed through this server via NAT.
It has been working fine in the office for about a year and all three macs worked fine. Now all three have the same issue.
A network sniff with WireShark shows that my mac sends a MDNS query to 224.0.0.251 then to 10.x.x.x which is the server. but the one to the server is designated a malformated packet.
My mac then sends a SSDP request to 10.x.x.x
The server replies with an ICMP packet saying the port it not reachable
My mac then sends out another request to the server
Then it sends out a SSDP request to 239.255.255.250 and continues doing so killing the network.
This is part of the packet trace
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:service:WANIPConnection:1
Man:"ssdp:discover"

Hi Ralph
Thanks but no joy.
Some more background information:
When I run iChat at home it all works fine, without a problem. It is only when I am in the office.
My office setup is DHCP from a Windows 2003 R2 x64 server and all network traffic is routed through this server via NAT.
It has been working fine in the office for about a year and all three macs worked fine. Now all three have the same issue.
A network sniff with WireShark shows that my mac sends a MDNS query to 224.0.0.251 then to 10.x.x.x which is the server. but the one to the server is designated a malformated packet.
My mac then sends a SSDP request to 10.x.x.x
The server replies with an ICMP packet saying the port it not reachable
My mac then sends out another request to the server
Then it sends out a SSDP request to 239.255.255.250 and continues doing so killing the network.
This is part of the packet trace
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:service:WANIPConnection:1
Man:"ssdp:discover"

IChat SSDP Discovery flooding network killing all networking.

I am having a huge issue with the latest version of iChat. When I start it up it sends out 10,000 to 20,000 SSDP requests to 239.255.255.250. If I shut down iChat it continues for about a minute then stops and everything is back to normal. Tried changing the ports.
We are using NAT on a Windows 2003 server.
This kills the network and no other network traffic happens.
This has only just started in the last week.

Hi Ralph
Thanks but no joy.
Some more background information:
When I run iChat at home it all works fine, without a problem. It is only when I am in the office.
My office setup is DHCP from a Windows 2003 R2 x64 server and all network traffic is routed through this server via NAT.
It has been working fine in the office for about a year and all three macs worked fine. Now all three have the same issue.
A network sniff with WireShark shows that my mac sends a MDNS query to 224.0.0.251 then to 10.x.x.x which is the server. but the one to the server is designated a malformated packet.
My mac then sends a SSDP request to 10.x.x.x
The server replies with an ICMP packet saying the port it not reachable
My mac then sends out another request to the server
Then it sends out a SSDP request to 239.255.255.250 and continues doing so killing the network.
This is part of the packet trace
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:service:WANIPConnection:1
Man:"ssdp:discover"

ITunes kills my network

Hi, I've seen a number of threads in the past about iTunes killing the network. I'm trying to download the latest firmware for my iPad (4.3.2) but I am unable to do so as my network dies. It only happens when I use iTunes. I am on an ADSL Router, and it seems that it kills my connection between my PC (10.1.1.3) and my router/gateway (10.1.1.1) As I type, my PC has been happily pinging the default gateway for 30 minutes now, but as soon as I try to download apps or the firmware, anytime between immediately and 60 seconds, it starts displaying "General Failure" and "Request timed out" randomly until it dies. I then get random replies of "Reply from 10.1.1.3: Destination host unreachable." The firmware won't allow me to resume the download after it dies, which make it that much more difficult.

I have also tried updating from version 7 to 8 Itunes. This did not fix the issue.

Can I connect a TC with BT Infinity router to form a network

My main router is a BT Infinity 5 in the home and the TC is connected to this router via an in-line system in an out building office. The system works fine in both places however is it possible to make one network? I would like to have one network so that I can use the printer in the office.

I am not sure what you are defining as in-line system.. but any ethernet or EOP adapter type setup will allow the TC to be part of the same network.
It should be in bridge mode..
ie
And it should be set to create a wireless network of the same name and same security and password as the BT router.
Where I have TC24ghz you type in your BT wireless name.
The TC is then setup as a roaming wireless AP in the network.. with full access from anywhere in the network.. but do not expect perfection from Yosemite.. it has trouble remembering its own name 5 min after a reboot.

I pressed Windows-M to minimize all screens, then Firefox 6.0.1 (Win XP VM) started to open large number ( 70 in a few seconds) of new Firefox windows (stopped only when I killed the Firefox process with Task Manager). Firefox had no focus at that time.

Windows XP 64-bits Virtual Machine, ServicePack 2, 4MB of RAM, dual processor running on a Windows 7 64-bits host machine, ServicePack 1, 8MB, 8-core processor.
I have worked with that for half a year, no particular issues.
I was working in other program in my VM (so Firefox had no focus) , then wanted to view my VM desktop, so I pressed Windows-M to minimize all windows in my VM. Exactly at that time Firefox 6.0 started to issue new empty Firefox windows, at a pace of about 4 or 5 per second. So I killed the firefox.exe process in my TaskManager to prevent my machine of running out of memory. Then I started Firefox again, without further issues so far.

I'm a Chrome user by choice. I use Firefox for two reasons only:
1) Speedbit video downloader
2) A second browser to handle secondary Google and Facebook sign-ins.
If I remove Speedbit, I lose 50% of my reason to use your browser at all.
Speedbit and Firefox worked together just fine before version 19.
PLEASE PROVIDE A PATCH. DON'T BLAME SPEEDBIT.
Thank you.

A web site I used to visit daily, but haven't for a while, causes Firefox to go off in la-la land. I have to kill the process with the task manager.

The web site in question is for our local newspaper. The problem occurs when I am returning from a discussion thread (by Disqus) to the article it's attached to. Also when I attempt to return to the home page from an article. Sometimes just letting it sit for a while will produce the problem. At that point I cannot open a new tab, switch to another open tab, close tabs, click on any menu bar items or close the app. The tab I was in shows the spinning wheel and says connecting. I must use Task Manager to kill the process. I tried installing version 31.0 with no result.

Application Basics
Name: Firefox
Version: 31.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Firefox/31.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Adblock Plus
Version: 2.6.4
Enabled: true
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Name: Adblock Plus Pop-up Addon
Version: 0.9.2
Enabled: true
ID: [email protected]
Name: Flashblock
Version: 1.5.17
Enabled: true
ID: {3d7eb24f-2740-49df-8937-200b1cc08f8a}
Name: Image and Flash Blocker
Version: 0.7
Enabled: true
ID: [email protected]
Name: Webroot Filtering Extension
Version: 1.0.0.40
Enabled: true
ID: [email protected]
Name: Consumer Input
Version: 9948
Enabled: false
ID: ConsumerInput@Compete
Name: TopArcadeHits
Version: 1.0
Enabled: false
ID: {0113D088-8ED1-468C-B225-585A9C53B5E3}
Graphics
Adapter Description: Intel(R) G33/G31 Express Chipset Family
Adapter Drivers: igdumd64 igdumdx32
Adapter RAM: Unknown
Device ID: 0x29c2
Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 8.1500.1000.1930 or newer.
DirectWrite Enabled: false (6.2.9200.16571)
Driver Date: 9-11-2009
Driver Version: 8.15.10.1912
GPU #2 Active: false
GPU Accelerated Windows: 0/1 Basic
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) G33/G31 Express Chipset Family Direct3D9Ex vs_0_0 ps_2_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20140716183446
browser.startup.homepage: http://search.conduit.com/?ctid=CT3310511&octid=CT3310511&SearchSource=61&CUI=UN32943663548444182&UM=2&UP=SPB3F4BFFF-D3A
browser.startup.homepage_override.buildID: 20140716183446
browser.startup.homepage_override.mstone: 31.0
dom.mozApps.used: true
extensions.lastAppVersion: 31.0
font.internaluseonly.changed: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1408714969
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.state.npqtplugin: 2
print.printer_EPSON_NX420_Series.print_bgcolor: false
print.printer_EPSON_NX420_Series.print_bgimages: false
print.printer_EPSON_NX420_Series.print_colorspace:
print.printer_EPSON_NX420_Series.print_command:
print.printer_EPSON_NX420_Series.print_downloadfonts: false
print.printer_EPSON_NX420_Series.print_duplex: 185
print.printer_EPSON_NX420_Series.print_edge_bottom: 0
print.printer_EPSON_NX420_Series.print_edge_left: 0
print.printer_EPSON_NX420_Series.print_edge_right: 0
print.printer_EPSON_NX420_Series.print_edge_top: 0
print.printer_EPSON_NX420_Series.print_evenpages: true
print.printer_EPSON_NX420_Series.print_footercenter:
print.printer_EPSON_NX420_Series.print_footerleft: &PT
print.printer_EPSON_NX420_Series.print_footerright: &D
print.printer_EPSON_NX420_Series.print_headercenter:
print.printer_EPSON_NX420_Series.print_headerleft: &T
print.printer_EPSON_NX420_Series.print_headerright: &U
print.printer_EPSON_NX420_Series.print_in_color: true
print.printer_EPSON_NX420_Series.print_margin_bottom: 0.5
print.printer_EPSON_NX420_Series.print_margin_left: 0.5
print.printer_EPSON_NX420_Series.print_margin_right: 0.5
print.printer_EPSON_NX420_Series.print_margin_top: 0.5
print.printer_EPSON_NX420_Series.print_oddpages: true
print.printer_EPSON_NX420_Series.print_orientation: 0
print.printer_EPSON_NX420_Series.print_page_delay: 50
print.printer_EPSON_NX420_Series.print_paper_data: 1
print.printer_EPSON_NX420_Series.print_paper_height: 11.00
print.printer_EPSON_NX420_Series.print_paper_name:
print.printer_EPSON_NX420_Series.print_paper_size_type: 0
print.printer_EPSON_NX420_Series.print_paper_size_unit: 0
print.printer_EPSON_NX420_Series.print_paper_width: 8.50
print.printer_EPSON_NX420_Series.print_plex_name:
print.printer_EPSON_NX420_Series.print_resolution: 0
print.printer_EPSON_NX420_Series.print_resolution_name:
print.printer_EPSON_NX420_Series.print_reversed: false
print.printer_EPSON_NX420_Series.print_scaling: 1.00
print.printer_EPSON_NX420_Series.print_shrink_to_fit: true
print.printer_EPSON_NX420_Series.print_to_file: false
print.printer_EPSON_NX420_Series.print_unwriteable_margin_bottom: 0
print.printer_EPSON_NX420_Series.print_unwriteable_margin_left: 0
print.printer_EPSON_NX420_Series.print_unwriteable_margin_right: 0
print.printer_EPSON_NX420_Series.print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 4
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1406752907
JavaScript
Incremental GC: true
Accessibility
Activated: true
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.6
Version in use: 4.10.6
NSS
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSSMIME
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSSSL
Expected minimum version: 3.16.2 Basic ECC
Version in use: 3.16.2 Basic ECC
NSSUTIL
Expected minimum version: 3.16.2
Version in use: 3.16.2
Experimental Features
---------------------

Discoverer Plus - Kills the browser with error msg for session timeout

If left idle for more than few minutes, Discoverer Plus instance will kill itself with an error.
i guess it kills the IE browser instance with an error message when Session Timeout occurs. The problem is I have to re-login in a new IE browser.
Is this normal behavious, or a bug. Any workaround to stop this happen. Please can someone help me, we are going on for a production rollover very soon.
I appreciate your help.
Regards, B

B,
The pref.txt file has session time out parameter that can be controlled. You can increase the time out value.
Regards

Mail is killing the processes on my server with IMAP

Why is mail over running my server with IMAP processes?
I've had to start killing the process like crazy cause it was causing other services on my website to fail.
i contact support for Hostgator and they asked if i was using Mac Mail. i said yes, and he said, yeah mac mail does that. what's that suppose to mean?
it really hasn't happened in the past, why now?

I have found a temporary fix, until Apple addresses the issue.
For those with access to the cPanel for their hosting account, you will need to create a Cron Job. At blueHOST.com I have access to this feature. I created a cron job via the cPanel to run every two minutes (because I have so many users running mail at the same time.) And the command is "killall imap" (without the quotes). This will do as advertised, kill all imap processes, old and new, every two minutes. You can set the amount of minutes to anything you want.
I can thank a senior tech at blueHOST for the idea. It may be strong-arming the situation, but it gives my client back their blog.
In my first post here, I said I sent this to MacFixIt. They never published or followed up on the eMail I sent. But I've also formally sent this as an issue via Apple Support. With any luck it will be fixed with the 10.5.7 update when it comes out.
If you have not made a formal report to Apple I strongly suggest you go to the Mac OS X Feedback page & file a detailed report of the issue you are having with IMAP processes & Mail.app. Reporting in the support forums may not be enough to get the full attention of Apple.
I will also post this on my blog.

CE-507 with ACNS 4.1.1 killing the network !

Similar Messages

Maybe you are looking for