CE 590 as content router?
I have a CE 590. How can I reconfigure it to function as a content router? or is this diable?
Thanks
You can configure the CE for transparent caching but would still need a router to redirect the traffic to the CE. You will not be able to configure the CE to act as a router. Couple of docs that you can refer to: http://www.cisco.com/warp/public/117/cache_engine/transparentconfig.html
http://www.cisco.com/warp/public/117/wccp/wccp2.html
Similar Messages
-
OWSM: problem with content routing
Hi,
I am working on OWSM and i have registerd a service on owsm and tested it through it. it works fine. But the problem is when i click on content routing it gives me this error "The following exception occurred when processing the JSP:
Could not connect to Gateway using its URL.The Gateway is not running or there was a problem establishing connection with the Gateway. Please ensure the Gateway is running before trying this operation.
Use your browsers "Back" button if you would like to try again."
i cant use the content routing option in policy management link , otherwise the service is running fine.
Thanks in advance.
Regards,
Abhi...
Message was edited by:
Abhishek saurabhHi all,
Any updates??
If case of any clues, please let me know because its urgent.
Regards,
Abhi... -
OWSM content routing issue (fs/crouter)
Hi,
I am using OWSM console to implement content routing. I am following the steps mentioned in the administrator guide for OWSM.
However, I am getting stuck at the very last step of content routing.
Replace the endpoint URL with the following URL:
http://host_name:port/gateway/fs/crouter
It is not excepting/invoking anything when I replace my wsdl url with fs/crouter.
Please help.Please reply if anyone has faced the same issue...or has resolved this issue.
salil -
What is difference between content switching, content routing...
Hi friends,
I want to know differences between content switching, content routing...
I want to know too, if a Content Engine 566 can caching FTP, HTTPS, Video and so on....
Regards and thank you.
Raúl.A content engine can cache files transfered via ftp but not https [as the content is encrypted].
It can cache whatever file, including video, audio, ...
Content routing, content switching are just names.
They refer to how the traffic will be intercepted and forwarded to the content engine.
You could simply use a proxy solution and have your users setup their browser to use the content engine as a proxy, or you could transparently intercept http/ftp traffic via a router running wccp, or you could use a Layer7 device like a CSS to intercept the traffic and redirect to the content engine.
Regards,
Gilles. -
Config content router dns record
Does anyone know how to config the DNS record on the content router
The FQDN mapping on the Content Router (CR) is received from the CDM based on the configuration of the Websites in the CDM. When you are configuring a website on the CDM, populating the 'Request Routed FQDN' field will cause the CDM to inform the CR that it should start responding to DNS requests for that domain.
In short, there is nothing that needs to be configured directly on the CR -- all of the configuration happens on the CDM.
~Zach -
Content Routing in JMS?.
Hi All,
Is content based routing possible in JMS queues?.
If we have one sender JMS queue, and it posts 2 messages.. one with employee structure.. and other with bank information structure..
with 2 separate structures for separate interfaces.. can XI communication channels pick up the message and route it to the correct interface?.
If so is there something special that I need to impletement?.
Please advise.
Thanks!.Any thoughts on this?.
Thanks. -
I have a SCCM 2012 SP1 CU3 "example" environment containing:
primary site in Europe (DP is not actively used)
secondary sites in Europe, US and Asia (DP's are used)
10 DP's in Europe, 10 DP's in US and 10 DP's in Asia
What I want is:
Packages are created at primary and distributed to all DP's. I want to be sure that the content of the packages first go to the DP's at the secondary sites and AFTER that being distributed from the secondaries to the DP's.
Also the DP's in Asia may only get the content from the Asia secondary site DP.
Also the DP's in Europe may only get the content from the Europe secondary site DP.
Also the DP's in US may only get the content from the US secondary site DP.
How will I ensure that this flow will be followed ?I will try to complete my case with some more information.
I have about 12000 clients. 4000 in Asia, 4000 in US and 4000 in Europe. They are managed form a primary located in Europe with lines to US and Asia. Currently all is configured and connected in SCCM 2007 and it will be migrated to SCCM 2012.
In 2012 we decide to use secondaries at the main region locations which also function as the MP for that regions (4000 clients). The MP traffic is then throttled to the primary.
Within a region we do have 10 DP's now in SCCm 2007 which are currectly shared with SCCM 2012. That works fine. But we also want to migrate those DP's to become SCCM 2012 DP's and we want te ensure that package traffic flow is minimized. So we want to send
packages from primary to secondary an dthen to the DP's.
We also do not want to reinstall the DP's since they have about 300GB of data and the lines are small. So what is the best way to go for ? migrate the DP's to SCCm 2012 DP's will assign the DP's to the primary i guess. Then we send e.g. 10 times a package
to US and that is not what we want. Could I change the DP to a Pull-DP with remaining the data on it ? Could I change the traffic flow of a DP to be change from primary to secondary ?
Hopefully you guys can clear some thing for me.... -
I have a stand-alone CE-590 connected to 72xx ISP router,located outside of our PIX. When WCCP service is enabled, download speed (tested using DSLExtreme site) is about 11MB, but if WCCP is disabled (or simple unplugged cable from CE), then download speed jump to 22MB.
The part of config is below:
Router:
ip wccp web-cache
ip wccp 53
ip wccp 91
ip wccp 98
interface FastEthernet0/0
ip address XXXX XXXX
ip route-cache same-interface
interface Serial3/0
ip wccp web-cache redirect out
ip wccp 53 redirect out
ip wccp 91 redirect out
ip wccp 98 redirect out
CE-590
wccp router-list 1 XXXX
wccp web-cache router-list-num 1 l2-redirect
wccp custom-web-cache router-list-num 1 port 8080 l2-redirect
wccp rtsp router-list-num 1
wccp dns router-list-num 1 l2-redirect
wccp version 2
Any help will be appreaciate.Thank you for the reply. And I have some more info now.
I did play with L2 config and left it on, but L2 doesn't effect the speed. I have no control of ISP router, I can only call them and ask for some changes (to add, to remove, etc). Their engineers can not explain to me why they need the Loopback interface, but take a look at the output of SHOW WCCP ROUTER comand and part of router's configuration. May be this is the reason???
As you can see no Serial (Internet) interface is involved....
X.X.X.X - is Router's Ethernet0
Y.Y.Y.Y - is router's Loopback interface
Z.Z.Z.Z - is Router's serial interface
-CE-590#show wccp router
Router Information for Service: Web Cache
Routers Configured and Seeing this Content Engine(1)
Router Id Sent To Recv ID
Y.Y.Y.Y X.X.X.X 00007D5B
Routers not Seeing this Content Engine
-NONE-
Routers Notified of but not Configured
-NONE-
Router Information for Service: Custom Web Cache
Routers Configured and Seeing this Content Engine(1)
Router Id Sent To Recv ID
Y.Y.Y.Y X.X.X.X 00007D5B
Routers not Seeing this Content Engine
-NONE-
Router Information for Service: DNS
Routers Configured and Seeing this Content Engine(1)
Router Id Sent To Recv ID
Y.Y.Y.Y X.X.X.X 00007D5A
Routers not Seeing this Content Engine
-NONE-
Routers Notified of but not Configured
Router Information for Service: RTSP
Routers Configured and Seeing this Content Engine(1)
Router Id Sent To Recv ID
0.0.0.0 X.X.X.X 0001163F
Routers not Seeing this Content Engine
X.X.X.X
Routers Notified of but not Configured
-NONE-
Router Information for Service: WMT
Routers Configured and Seeing this Content Engine(1)
Router Id Sent To Recv ID
0.0.0.0 X.X.X.X 00000000
Routers not Seeing this Content Engine
X.X.X.X
Routers Notified of but not Configured
-NONE-
ROUTER:
interface Loopback0
ip address Y.Y.Y.Y 255.255.255.255
no ip directed-broadcast
interface Serial3/0
description LAX-DC2--S8/1:8
ip address Z.Z.Z.Z 255.255.255.254
no ip directed-broadcast
ip wccp web-cache redirect out
ip wccp 53 redirect out
ip wccp 91 redirect out
ip wccp 98 redirect out
interface FastEthernet0/0
description
ip address X.X.X.X 255.255.255.240
ip access-group 194 in
ip access-group 193 out
no ip directed-broadcast
ip route-cache same-interface
Thanks again for help -
Content based routing and XML with multiple objects
I have some structure:
<contracts>
<contract>
<department>1</department>
</contract>
<contract>
<department>1</department>
</contract>
<contract>
<department>2</department>
</contract>
</contracts>
I need to route contract to 2 system based on <department> value:
contracts/department = 1 --> System1
contracts/department = 2 --> System2
Will XI split my XML (based on Content Routing rules in ID) into 2 structures (with departmet=1 and department=2 accordingly) ?
Or I have to perform 1ToN mapping? I don't like it bacause it will be diffucult to monitor hundred of messages.Alternatively if you donot like 1:n mapping and BPM.
Create two message mappings in the IR
1.Source :<contracts>
<contract>
<department>1</department>
</contract>
<contract>
<department>1</department>
</contract>
<contract>
<department>2</department>
</contract>
</contracts>
Target:
<contracts>
<contract>
<department>1</department>
</contract>
<contract>
<department>1</department>
</contract>
Basically mapping generates a target structure which has only department 1.
2.Same like step1 but the mapping should generate the XML with department = 2.
Once requires steps are done in the ID , do the content based routing in the reciever determination and give the appropraite message mapping in the interface determination.
That should your problem and also you will like doing it as it does not involve any split level mapping..:) -
How to I get my Edge animations to work in Content viewer on the ipad?
I've created several animation in Animate, they preview fine in the browser. I have placed them into InDesign, they preview fine on the desktop. I upload the to view via the ADobe Content Viewer on my ipad - nothing. I have tried using the Web Content route and placing the html file, still nothing. I've checked for updates of everything and appear to be up to date. Need help!
On an iOS device, or on a computer without iTunes installed on it, you can view your last 90 days purchases (and optionally contact iTunes Supportif you have a problem with a purchase) via http://reportaproblem.apple.com
You can only view your full purchase history (not just the last 90 days) via a computer's iTunes : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases -
Content Engine caching video content?
I am currently running ACNS version 5.5.11.2 on a CE510 Content Engine. I recently had to replace the unit and when I set up the partitions for the new build, I elected to go with CE510#disk config sysfs 10% cfs 45% mediafs 45%.
Before the cfs was setup to use the whole box. I was thinking that the mediafs partition would start to cache video content. Does that happen automatically or is there some other setting to make that happen further. How do I determine if it is getting any use?A content engine can cache files transfered via ftp but not https [as the content is encrypted].
It can cache whatever file, including video, audio, ...
Content routing, content switching are just names.
They refer to how the traffic will be intercepted and forwarded to the content engine.
You could simply use a proxy solution and have your users setup their browser to use the content engine as a proxy, or you could transparently intercept http/ftp traffic via a router running wccp, or you could use a Layer7 device like a CSS to intercept the traffic and redirect to the content engine.
Regards,
Gilles. -
Trying to migrate to routed mode
We have multiples css11k configured as bridge mode.
The firewall has direct connection to all DMZ (one vlan per DMZ) and it is the default gateway for all servers. The CSS11K is connected to all DMZs and using the group NAT to relay traffic to the real servers. The firewall does NAT for public to private VIP.
We are trying to migrate to routed mode so the servers can capture true source IP addresses, reduce the number of default routes in the CSS and remove the public VIP NATed in the firewall (to setup content rule VIP using the public ip address).
A new test DMZ is setup and it is connected by CSS and the real HTTPs servers. A test ip address is
configured at the firewall without NAT and the firewall is configured to route the incoming traffic to the CSS through one of the existing DMZ. The content rule of the CSS is configured using the test public ip address. I can see traffic in/out through the two sniffers I setup (between f/w and CSS, and CSS and real server). Most of time, we cannot get page displayed. The firewall log showed all traffic in/out through the correct interface. The sniffer showed data retransmission, tcp rest, tcp out of order .....
Any suggestion.
p.s. The ssl certificate is associated with the public ip address. The server is working fine if we connect the firewall directly to the new test DMZ and have firewall does the server IP NAT.here is section of the cfg (modified ip address and name):
############# using network 10.10.20.0/255.255.255.0 to route 100.1.1.1 traffic to CSS11K
ip route 0.0.0.0 0.0.0.0 10.10.20.1
ip route 0.0.0.0 0.0.0.0 10.10.10.1
!************************* INTERFACE *************************
interface 1/1
trunk
redundancy-phy
vlan 10
vlan 20
vlan 30
interface 2/1
trunk
vlan 10
vlan 20
vlan 30
interface 3/1
bridge vlan 999
phy 100Mbits-FD
!************************** CIRCUIT **************************
circuit VLAN10
redundancy
ip address 10.10.10.254 255.255.255.0
no redirects
circuit VLAN20
redundancy
ip address 10.10.20.254 255.255.255.0
no redirects
circuit VLAN30
redundancy
ip address 10.10.30.254 255.255.255.0
no redirects
circuit VLAN999
description "Box-to-Box Redundancy VLAN"
ip address 10.0.0.1 255.255.255.252
redundancy-protocol
!************************** SERVICE **************************
service VLAN10-SERVER-1
ip address 10.10.10.125
protocol tcp
port 80
domain test.vlan10.com
keepalive type tcp
keepalive port 80
active
service VLAN10-SERVER-2
ip address 10.10.10.126
protocol tcp
port 80
domain test.vlan10.com
keepalive type tcp
keepalive port 80
active
service VLAN20-SERVER-1
ip address 10.10.20.125
protocol tcp
port 80
domain test.vlan20.com
keepalive type tcp
keepalive port 80
active
service VLAN20-SERVER-2
ip address 10.10.20.126
protocol tcp
port 80
domain test.vlan20.com
keepalive type tcp
keepalive port 80
active
service ROUTED-SERVER
protocol tcp
ip address 10.10.30.18
no cache-bypass
keepalive type tcp
keepalive port 443
keepalive frequency 60
port 443
domain ROUTED-SERVER.com
active
!*************************** OWNER ***************************
owner vlan10
content vlan10.com
dnsbalance roundrobin
vip address 10.10.10.100
protocol tcp
port 80
balance aca
add service VLAN10-SERVER-1
add service VLAN10-SERVER-2
advanced-balance sticky-srcip
active
owner vlan20
content vlan20.com
vip address 10.10.20.100
protocol tcp
port 443
add service VLAN20-SERVER-1
add service VLAN20-SERVER-2
advanced-balance sticky-srcip
active
owner routed-segment
content routed-server.com
vip address 100.1.1.1
balance aca
port 443
protocol tcp
dnsbalance roundrobin
add service ROUTE-SERVER
active
!*************************** GROUP ***************************
group group.nat.vlan10
portmap number-of-ports 14304
vip address 10.10.10.100
add destination service VLAN10-SERVER-1
add destination service VLAN10-SERVER-2
active
group group.nat.vlan20
portmap number-of-ports 14304
vip address 10.10.20.100
add destination service VLAN20-SERVER-1
add destination service VLAN20-SERVER-2
active -
CSS & CE Reverse Proxy Caching - Freshness and Content - Help !!!
We have a pair of 11054's and a pair of 570 CE and a pair os SCA's and using them in a RPC configuration in front of a series of static content web servers.
My problem is I want the CE's to server content even when the origin server(s) are down but where the content is cached fresh or not. So of if the cache has the content, serve it no matter what its freshness. I don't want to have a sorry server used unless the content isn't cached at all.
Or can I pre-position content on the same CE and have it server from there. What content types can be prepositioned ? Is someone going to tell me I need a content router now of something ?
Anyone have any bright Ideas ??
Thanks
SimonSince there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting. -
Can I deploy a CSS 11501 to just route requests to several reals (not phiscally behind the CSS) on separate network segments?
I looked at Content routing Agent but this feature is just for DNS requests...I would like to do the same but for different traffic on different ports.
Thanks
MANUELwith the CSS you can have the reals several hops away.
However, you have to be careful that the response from the real server goes back through the CSS as well.
This is a statefull device so it needs to see all the traffic [like a firewall].
If you can't guarantee this, you need to configure client nat on the CSS, to force the response to come back to it.
Regards,
Gilles. -
Content rotuing with switching
Hi
What is the difference between content routing and content switching. Are they required to be integrated together or are they seperate solutions. With content routing we use the DFP,BCP, WCCP and other protocols to receive information. Are these protocols used with the Content switching as well or does this act in a different way.
Thank you
Regards
SanjithHi
I came across these products which are the 4400 series describing itself as the Content routers. In one of the presentations from Cisco I see the deployment of both the Content router as well as the content switch in a single data center setup. The packet goes to the content router and then to the content switch. But I am not sure why this is required. On reading the description of the content routers I see they do the exact same thing. To put it in a nutshell when would you deploy a Cisco 4400 Series Content Routers and when a CSS11500.
The following URL is about this contenet router
http://www.cisco.com/en/US/products/hw/contnetw/ps777/products_white_paper09186a0080091d9c.shtml
Thank you
Regards
Sanjith
Maybe you are looking for
-
Picking Premiere Pro CC as the Default Program in Windows 8.1
I have both Premiere Pro CS6 and CC on my computer and have to have it that way for access to older projects. I can't get Windows to default to the newer CC version. Using the "Open With" and drilling down to the newer version does not change the def
-
Stereo Audio Treated Separately, How Do I Link?
I recently migrated from FCE to FCP. I love FCP, but there's one difference that's bugging me. In FCE, when you selected and manipulated a stereo audio track, each channel was linked, so when you changed the db level or applied a pen point to one tra
-
Time machine not working since Safari 4 upgrade
I had all kinds problems installing the Safari 4 upgrade (from 4beta) a couple of days ago - it knocked out everything that talks to the internet. I finally got that sorted by reinstalling, but since then TM has been unable to complete backups. I get
-
Serialization error in inbound idoc
Hi Friends Am getting inbound idocs with this error : Serialization errror for object 01,S, 34343434,Expected counter 000001< and error in details says, The expected serialization counter has the value 000001. However, the serialization counter in th
-
HT4906 do i have to pay for iPhoto now to use iCloud
do i have to pay for iPhoto now to use iCloud