CE 7.1 and CE7.0

What are the new features added in CE 7.1?
Currently I am using CE 7.0 SP 14..I am trying to create dynamic interactive forms using interactive form callable object.Is that possible in 7.0?
If so, any patches I need to install in 7.0 rather going for 7.1..
please advise
thanks
Gopal

Hello Gopal,
first of all, please be aware of that CE7.0 does not exist.
You can use GP embedded in SAP NetWeaver7.0 or available with SAP NetWeaver Composition Environment (CE) 7.1 together with SAP NetWeaver 7.1.
The dynamic forms are available with SAP NetWeaver CE 7.1 (SP0).
What's new with SAP NetWeaver CE 7.1:
[SAP Network Blog: Guided Procedures - New Functions & Features with CE 7.1|Guided Procedures - New Functions & Features with CE 7.1]
What's new with SAP enhancement package 1 for SAP NetWeaver CE 7.1:
An outlook will be blogged still within this week.
[Here is the link about general informations how to install which version of SAP NetWeaver CE 7.1.|https://www.sdn.sap.com/irj/sdn/nw-composition?rid=/webcontent/uuid/e0c6b746-61de-2910-e2a0-9991016c17a7]
Regards
Berndt

Similar Messages

  • BPM standard notification in FDN (EP 7.02 and CE7.2)

    Hello, we have FDN with EP7.02 and CE7.2. We have a requirement to tune the notification.
    Now the user get the notification that he has a new task in the UWL. There is two links in the letter, to the UWL and direct link to the task. But they links to the CE7.2 portal. Is it possible to have a notification letter with links to the task and UWL and the baseurl should be EP7.02? I tried to use baseurl parameter, but it doesn't help.

    For example my CE7.2 baseurl is http://sapce:50000/ and EP7.02 is http://sapep:50000/.
    I set baseurl parameter in the NWA CE7.2 to http://sapep:50000/ and now I have the following links in the email:
    http://sapep:50000/webdynpro/dispatcher/sap.com/tcbpemwdui~taskinstance/ATaskExecution?taskId=42eb1ee5b2a711e09639000025880a66
    http://sapep:50000/irj/portal/?NavigationTarget=ROLES:portal_content/every_user/general/eu_role/com.sap.uwl.home_ws/com.sap.netweaver.bc.uwl.work/com.sap.netweaver.bc.uwl.uwl_page
    The first link doesn't work because there is not application tcbpemwdui~taskinstance in the EP7.02, it is only in CE7.2.

  • Difference between 7.0 and ce7.2 versions

    Hi Everybody,
    Can any body tell me what is the difference between 7.0 and ce7.2
    Thanks,
    William

    Hi William,
    SAP Netweaver Portal 7.0 is the part of main release SAP NetWeaver 7.0. it has all the features like portal, Knowledge Management and Collaboration etc plus you can apply built in packages provided by SAP on ESS, MSS etc
    CE 7.1 and CE 7.2 are complementary products by SAP. Their main purpose is to enable the design of composition application easier and more effective. They have various new features compared to 7.0 like AJAX, CAF, Service Repository. But CE portal is only a thin portal means it does not obsesses all the full fledged features of portal like KM, Collaboration, TREX etc.
    However, using federated portal concept you can use them both together.
    Thanks
    Sarbjeet Singh,

  • About Adobe Sample Applications and Tutorials

    Dear All
    Is there any  Interactive Forms Applications and Tutorials by Adobe which use SAP NetWeaver Developer Studio 7.1 and CE7.1.
    i  can find some which use NetWeaver Developer Studio 7.0,there are many different places.
    i hope people can give me some that use  NetWeaver Developer Studio 7.1,my email is
    s_jd at 163.com.
    Thank you

    CRAZY!!! What would cause my system to start magically deleting random applications and files???
    An improper shutdown or restart can cause the filesystem corruption.
    Can someone please tell me what these error messages mean?
    The repair permission errors are innocuous. Dejavu is looking for the volinfo.database which is missing. This database keeps a record of permission enabled and disabled mounts (disks).

  • Recommendation for ESR and SR configurations

    Hi,
    I need some recommendation on configuration of the ESR and Service Registry in a landscape. Now that ESR and SR can reside either on CE or PI and since both PI7.1 and CE7.1 are capable of having ESR and SR configured. What is recomemded approach?
    We are trying to build sample applications using Visual composer and  WebDnpro.
    Any inputs and document links would be appreciated.
    Thanks,
    Roger.

    Hi Roger,
    The SAP [recommendation|http://help.sap.com/saphelp_nwce711/helpdata/en/dc/38d384533d472e8a6801a0fbd3d18f/frameset.htm] is to use the ES Repository delivered with SAP NetWeaver PI.
    You can also check this [link|http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417400)ID1688349650DB02601830347553568045End?rid=/library/uuid/20ca27e7-58c8-2b10-bba1-de0d6f14e57f&overridelayout=true].
    Hope this help
    Regards,
    Eduardo

  • NWDS version for EP7.0 EHP1 & CE7.1

    Hi All,
    Which NWDS version I need to install to support both EP7.0 EHP1 and CE7.1 for development and deployment of Web Dynpro Java .
    I am new to CE7.1. I am aware of settings need to done in NWDS for the deployment of WDJ application. For CE7.1 server what necessary steps I need to follow for development and deployment.
    Thanks,
    Deepak!!!

    Ervin,
    Thanks so much for the reply.
    I am collecting the necessary EP7.0 and CE7.1 server information on which I suppose to do development work. As per shared URL I have to go for 2 NWDS version in the same machine pointed to different work space.
    I'm trying to know how to use CE7.1 portal & NWDS development and deployment. Can you share your view on this?
    Can I use NWDS7.1 for the development and deploy the application in both CE7.1 & EP7.0 EHP1?
    What I am trying to achieve here is:-
    1>I need to do MDM/EP integration.
    2>Need to use MDM Java API's for customization for Search, Match & Merge and Gold copy creation functionality with work flow. This need to decide if there are SAP provided standard content coming with the BPM & CE7.3 for MDM functionality.
    3>MDM Workflow using EP-MDM-BPM scenario with CE7.1/7.3.
    Please share your thought on this.
    Deepak!!!

  • Versions and content of SAP Netweaver...

    Hi,
    Could someone please point me to the versions of SAP Netweaver?
    I would like to know the differences between SAP Netweaver, SAP Netweaver Portal, SAP Composition Environment, etc...
    If I download SAP composition environment won't I have the SAP Netweaver Portal?
    In SDN, under Downloads/SAP Netweaver Main Releases (http://www.sdn.sap.com/irj/scn/nw-downloads), which should I download?
    What does SAP Netweaver contain and what does SAP Composition Environment contain?
    Please provide me this information with the view that I am a fresher to SAP...
    Thanks,
    Agasthi...

    Hi Agasthi...
    SAP netweaver is a common name and normall it does not point to any specific product, and it consists of the following products:
      SAP NetWeaver Web AS ABAP
      SAP NetWeaver Web AS JAVA
      SAP NetWeaver Portal
      SAP NetWeaver BW&BI
      SAP NetWeaver PI(XI)
      SAP NetWeaver MDM ...
    Normally the version here is SAP NetWeaver 7.0x.
    SAP Composition Environment (SAP NetWeaver CE) is a robust platform that enables you to develop Java and composite applications from scratch and on top of existing services, the version is CE7.1x and CE7.2x.
    So simply you can understand SAP NetWeaver CE as a higher version of SAP NetWeaver J2EE implimentation.
    In case you want to test/use portal with CE, I think you can use the following edition:
    http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/d04ac7ef-0fe7-2c10-efb1-d27b38d730b3
    Best Regards,
    Thunder

  • ESR Installation with PI 7.0 / Netweaver 7.0 SR3

    Dear Experts,
    We have recently implemented PI 7.0, and the direction is to use ESR. I can find lots of information that PI7.1 and CE7.1 comes with ESR, but I am seeking information on how to install ESR with existing version, ie, PI7.0 without CE. ESR is uncharted waters to me. Here's my questions:
    (1) How to add-in ESR component to existing PI7.0?
    (2) I need help to kick start the installation/ even upgrade to ESR. Any documentation and links will be appreciated.
    Thanks.

    >>1) How to add-in ESR component to existing PI7.0?
    As said by stefan...ESR comes with PI 7.1 and CE 7.1
    You cannot convert your IR of 7.0 to ESR
    You have to install Pi 7.1 system in order to take the advantages of ESR
    Thanks
    farooq
    Edited by: Farooq Farooqui on Dec 23, 2008 6:33 PM

  • Use the new CE 7.1 NWDS for developing 7.0 Portal Applications

    Hi all,
    We currently evaluate which would be the best development studio for our development. Of course I know the SAP Guideline "use the same NWDS as your support package stack". This would mean we have to use NW 7.0 SPS 16. But we realized there is a new Eclipse Version within CE 7.1 NWDS.
    So the question is, could we also use the new NWDS, is it compatible with 7.0 or did anybody try something in the way we want to do?
    Thanks for your help,
    Stefan

    Hi Stefan,
    You might want to consider using the "federated portal network" (FPN) capabilities of SAP NetWeaver 7.0 and CE7.1.
    FPN in this case allows you can utilize the full composition capabilities of NWCE7.1 to develop applications and then render them in a central 7.0 runtime environment (portal). This is loosely called the "side-car approach".
    For more information: http://help.sap.com/saphelp_nwce10/helpdata/en/3e/878ce2eba747e2b065cfb5d4496483/frameset.htm
    Michael

  • Configuration of LUN's to Sun Cluster

    Hi,
    I have a 2 node Sun Cluster (V3.2) running on 2xE2900, Solaris 10...
    Basically, there are 3 installed Databases running on the development environment and I need to cluster all 3 in the Global Zone do some failovers and then engage Sun PS to come on site and configure the production cluster environment...
    Usually I have already configured metasets or ZFS and then the DBA installs the DB while everything is nice and neat, my question however is what is the best way to cluster the LUN's when they already have data which I cannot (or would prefer not) to loose.
    I believe the creation of LUN's in a metaset will destroy the data and obviously zfs pools will also destroy any data... hopefully this is a simple question from an SC novice :)
    Thanks...

    Thanks Tim, that answer the question... one more though :)
    I was advised to install a single node cluster then add the 2nd node to the config later. Ive done this but when I try to do the add it seems I have a problem with the cluster interconnects and receive the messages:-
    Adding cable to the cluster configuration ... failed
    scrconf: Failed to add cluster transport cable - does not exist
    scinstall: Failed to update cluster configuration ("-m endpoint=<server>:ce3,endpoint=switch1")
    The heartbeats are ce3 and ce7 which I know are working ok, ive tried everything from the 1st node but when I enter:-
    # scstat -W
    Nothing is shown, although when I do a scconf -p I can see the node transport adapters ok... so how do I let the 2nd node access to the cluster interconnects, ive tried clsetup and adding the interconnects via option4 and I remember configuring them during installation...
    Again any input would be greatly received...
    Thanks...
    Steve..

  • Connecting Non sap to webdynpro java

    Hi All
    My requirement is to connect a non sap (like mysql) to webdynpro java ..please  can anyone  provide me some document on this ..please help me
    Thanks
    Parameshwari

    Hi,
    If you are using NWDS 7.0 version, you have to create a Datasource in visual admin.
    If you are using CE 7.1 version, you have to create a Datasource in NWA--Configuration Management->Infrastructure->Application Resources.
    Step by step procedure how to create a Datasource in NWDS 7.0 and CE7.1 is given in this [PDF link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40db1ed9-b7c2-2b10-66b8-84f6954b6d2d?QuickLink=index&overridelayout=true]
    MYSQL Server 2005
    Driver/jar which you have to use --> sqljdbc.jar
    Driver class --> com.microsoft.sqlserver.jdbc.SQLServerDriver
    Connection URL --> jdbc:sqlserver://<host_name>:<port>;database=<db_name>
    Hope this helps you..
    Best Regards
    Vijay K

  • Career Guidance - What is scope for Java WD / ESS MSS Specialist

    Hi Experts,
    I am a trained and certified EP Consultant. I have worked in 3 implementation project and 1 support project. I have total 4 years of experience in SAP EP / Java WD / ESS / MSS / KM etc. I am presently working for a support project since 18 months. The work includes Java WD development , ESS , MSS customization.I am totally out of touch with the latest technologies related with SAP EP. I have heard that CE7.1 and CE7.2, EHP, PI etc related with my field.
    Can you please let me know what all are the new 'hot' things related with above skill. If possible provide me the links for learning CE7.1, CE7.2 and EHP etc.
    Please help.
    Regards,
    Gaurav

    Hi Gary,
    sorry for the link missing.
    Here are they
    SAP NetWeaver Composition Environment 7.1 
    Also check this blog for the startup
    SAP CE/SOA - The first steps?! 
    https://cw.sdn.sap.com/cw/docs/DOC-111503   
    hope this helps.

  • Connect WDJ to Sql server 2005

    Dear Experts,
    I need to connect, SQL server 2005 unsing WD java, can any one tell me what steps i need  to do  on WDJ side to established the connection.
    Also the what all jar files required to connect SQL 2005.
    Thank
    AB

    Hi Anup,
    If you are using NWDS 7.0 version, you have to create a Datasource in visual admin.
    If you are using CE 7.1 version, you have to create a Datasource in NWA--Configuration Management->Infrastructure->Application Resources.
    Step by step procedure how to create a Datasource in NWDS 7.0 and CE7.1 is given in this PDF link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40db1ed9-b7c2-2b10-66b8-84f6954b6d2d?quicklink=index&overridelayout=true
    MYSQL Server 2005
    Driver/jar which you have to use --> sqljdbc.jar
    Driver class --> com.microsoft.sqlserver.jdbc.SQLServerDriver
    Connection URL --> jdbc:sqlserver://<host_name>:<port>;database=<db_name>
    Hope this helps you..
    Regards,
    Saleem Mohammad

  • Clquorum add (clquorum:  (C522659) Unknown type "scsi".)

    Hi,
    I have 2 v890's solaris 10u4 connected to 6140 arrays (latest storade and Cam)
    recommended patches -> 127111-06
    cluster 3.2 plus HA oracle agent
    additional patches applied = 121211-02 125514-01 123305-03 121688-04 117650-66 117654-66 126106-07
    ran scinstall fine, enabled mpxio, now cluster is in install_mode, am attempting to add quorum device using clsetup and clq add d8, however i get the following error
    clq: (C522659) Unknown type "scsi".
    has anyone seen this error before and if so how do i tell the cluster that its default fencing device type is ok to use.
    I have looked everywhere for a similar issue but havnt seen one.
    Regards
    Tony

    hi,
    Thanks for your response. This is a brand new install of solaris and cluster so i havnt had the chance to play(change) anything yet.
    The problem was on all disks.
    I managed to get around this, by reinstalling it all and not putting storade on until after the cluster install.
    now the cluster is built i am seeing other problems.
    1, in format i am getting Error occurred with device in use checking: No such device for all luns on the 6140 although i can mount them label them etc.
    2 i have two transports ce3 and ce7 if i tell scinstall to use them in that order it fails autodiscovery. i replaced the switches with crossovers and tried again same problem. running scrmcd etc manually i found that this command only returned both interfaces if i gave them in the reverse order (Strange!!).
    3. when on node 1 trying to create a metaset (metaset -s bos-ds -a -h hannibal murdock) i get back :-
    sc_rval = 5
    metaset: hannibal: setname "bos-ds": no such set
    but it lets me do it on node 2 over the proxy.
    i now have a metaset, however now trying to add mediator's from either node i get segfault
    2080: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFE1D0000
    2080: munmap(0xFE460000, 32768) = 0
    2080: close(7) = 0
    2080: Incurred fault #6, FLTBOUNDS %pc = 0xFEE64E48
    2080: siginfo: SIGSEGV SEGV_MAPERR addr=0x00000010
    2080: Received signal #11, SIGSEGV [caught]
    2080: siginfo: SIGSEGV SEGV_MAPERR addr=0x00000010
    2080: lwp_sigmask(SIG_SETMASK, 0xFFBFFEFF, 0x0000FFF7) = 0xFFBFFEFF [0x0000FFFF]
    the same thing happens if i try to delete the diskset
    and if i create another one the only way seems to be over the proxy.
    root@hannibal /root $ metaset -s games-ds -a -h hannibal
    sc_rval = 5
    metaset: hannibal: setname "games-ds": no such set
    root@hannibal /root $ metaset -s games-ds -a -h murdock
    Proxy command to: murdock
    but i get the segfault when trying to delete it etc.
    root@hannibal /root $ metaset -s games-ds -d -h murdock
    metaset: Segmentation Fault
    I have all the patches i can find including the svm mediator patch.
    i think im going to try and reinstall all of this again. I didnt seem to have problems until i installed storeade.
    can you confirm if solaris 10u4 is infact ok to run with cluster
    regards
    Tony

  • SSO between BI,CE7.1 ENH1 and BOE 3.1

    Hi All,
    Our requirement is to do SSO between BI,CE7.1 ENH1 and BOE 3.1. In the BO Integration Kit documentation, it has mentioned trusting the systems between BI and BO and SSO configuration between EP and BO.
    I have performed all the steps given in the document even in CE Portal and SSO between CE and BO is not working. In further research, I can find in NWA, the JAVA EE Application u201Ccom.businessobjects.pct.masteriview.paru201D is in explicit stop mode and it is not starting even I try to do manually or restarting the server. Below is the log which states the following for not starting the service
    [ERROR CODE DPL.DS.5035] Application [sap.com/com.businessobjects.pct.masteriview] cannot be started. Reason: it has hard reference to resource [jcoclient] with type [SAPPORTAL], which is not active on the server. Hint: 1) Is referred resource deployed? 2) Is referred resource able to start?
    Not sure which resource it is looking for and need expertise on the same..Earliest response is highly appreciated.
    Thanks,
    PradeeP

    HI,
    please make sure you check the supported SAP J2EE versions for BusinessObjects here : http://service.sap.com/bosap-support and also remember that the integration is for the portal and you are using CE.
    ingo

Maybe you are looking for