CE 71 Productive Edition SR5 post processing

What is the procedure for post processing CE71 prod edition? Do I just run the config wizard only or do I need to run the prod or dev template.
Thanks
Mikie

Hi,
See Post Installation section:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80653293-da1c-2b10-3687-918d6323b728
Normally, you run the DEV, then run wizard. But the above document says the correct steps.
Best regards

Similar Messages

Looking for "SAP NetWeaver CE 7.1 SR5 Production Edition on Windows: MaxDB

From this URL (http://www.sdn.sap.com/irj/sdn/nw-ce-general#section9) there is a link to "Installation Guides - SAP NetWeaver Composition Environment 7.1 SR5 - Productive Editions ", which brings me to a page (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80653293-da1c-2b10-3687-918d6323b728) that has a button to view "SAP NetWeaver CE 7.1 SR5 u2013 Production Edition on Windows: MaxDB", but that button brings me to a document entitled "SAP NetWeaver Composition Environment ‒ Update Guide SP03" (http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80653293-da1c-2b10-3687-918d6323b728?overridelayout=true), instead. Does anyone know where the actual SR5 Productive Edition installation document is?
Thanks,
William

Hi William,
On the page page you have found (http://www.sdn.sap.com/irj/sdn/nw-ce-general#section9) there are two other links that might be of help to you:
In the table, the cell in the Windows column and MaxDB row holds a link that leads to a page where you can download the installation guide for SR5.
Below on the page, in the Updating SAP NetWeaver CE 7.1 section, there is a [SAP NetWeaver Composition Environment 7.1 SP05 Update Guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9077971a-48c9-2a10-3799-bf967a68ed08] link to the update guide for SR5.
Hope this helps,
Rossen

One or more post-processing actions failed. Consult the OPP service log for details.

hi expert plz help me i can't understand here what can i do to resove this error.
here is the logfile details of output post processor
ebs- 11i (11.5.10.2)
os - rhel 4
[9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
[9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
[9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
[9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
[9/2/13 4:59:35 PM] [2984174:RT21672063]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[090213_045936408][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936409][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
[090213_045936409][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[090213_045936410][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[090213_045936419][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
[090213_045936419][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[090213_045936419][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[090213_045936419][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[090213_045936420][][EXCEPTION] [DEBUG] [path.separator]:[:]
[090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[090213_045936420][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[090213_045936420][][EXCEPTION] [DEBUG] [user.country]:[US]
[090213_045936420][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
[090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[090213_045936421][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936421][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[090213_045936422][][EXCEPTION] [DEBUG] [line.separator]:[
[090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936422][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[090213_045936422][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936422][][EXCEPTION] [DEBUG] [cpid]:[2984174]
[090213_045936422][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[090213_045936423][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[090213_045936423][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[090213_045936423][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-82.ELsmp]
[090213_045936424][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[090213_045936424][][EXCEPTION] [DEBUG] [user.home]:[/home/appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[090213_045936424][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[090213_045936424][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[090213_045936424][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
[090213_045936424][][EXCEPTION] [DEBUG] [user.name]:[appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
[090213_045936425][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[090213_045936425][][EXCEPTION] [DEBUG] [user.language]:[en]
[090213_045936425][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
[090213_045936425][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[090213_045936426][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936426][][EXCEPTION] [DEBUG] [file.separator]:[/]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[090213_045936426][][EXCEPTION] [DEBUG] [APPLOUT]:[out/ORIDEMO_demo]
[090213_045936427][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
[9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
[9/2/13 5:10:51 PM] [2984174:RT21672114]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
thaks
pritesh

hi experts
thanks for ur replay,
this issue is occured with only the particular request and this is custom report. i try some step
down the manager run the cmclean.sql, increease the processes of output postprocessor but not get the any type of effect on issue...
and also follow the step that describe in the below doc:
Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
To Bottom
request log file details below:
+---------------------------------------------------------------------------+
CONA Custom: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
+---------------------------------------------------------------------------+
Current system time is 02-SEP-2013 17:10:29
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SEGM='02'
P_CHART_OF_ACCOUNTS_ID='50268'
p_from_date='2012/04/01 00:00:00'
p_to_date='2012/04/05 00:00:00'
P_YES_NO='No'
XML_REPORTS_XENVIRONMENT is :
/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
+------------- 2) PRINT   -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 02-SEP-2013 17:10:52
+---------------------------------------------------------------------------+
i check the document that u all suggest above after that i update u as soon as possible..
thanks & regards
pritesh ranjan

One or more post-processing actions failed - XML Publisher report

Hi all, I'm working with the following envinronment:
Unix platform: HP-UX rp1 B.11.11 U 9000/800
DB: Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
eBS: EBS 11.5.9
More in detail I have a problem when I run a request to see an XML Publisher Report. The request's status at the end is WARNING.....
When I click on "View Output" I don't see nothing and inside the "View Log" I have this error:
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1897375 on node RP1DEV at 10-SEP-2008 14:13:36.
Post-processing of request 1897375 failed at 10-SEP-2008 14:13:37 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Following the Metalink Note 364547.1 I opened the OPP service log and this is the content:
[9/10/08 2:51:09 PM] [OPPServiceThread0] Post-processing request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Executing post-processing actions for request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Starting XML Publisher post-processing action.
[9/10/08 2:51:09 PM] [72379:RT1897433]
Template code: XX_MANAGERS
Template app: AR
Language: en
Territory: GR
Output type: PDF
[9/10/08 2:51:09 PM] [UNEXPECTED] [72379:RT1897433] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:187)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:223)
at sun.io.Converters.newConverter(Converters.java:263)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/10/08 2:51:09 PM] [72379:RT1897433] Completed post-processing actions for request 1897433.
Anybody have any idea where the error is ?
Any help will be appreciated
Alex

You are right !!
The problem is inside the report generated by Oracle Reports
The XML code, which I retrieve running the report request is the following:
<?xml version="1.0" encoding="&Encoding"?>
- 
- <MODULE1>
- <LIST_G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1000</MANAGER_NO>
<MANAGER_NAME>Anil Passi</MANAGER_NAME>
</G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1001</MANAGER_NO>
<MANAGER_NAME>Martin</MANAGER_NAME>
</G_MANAGER_NO>
</LIST_G_MANAGER_NO>
</MODULE1>
and the problem is the "&" !!!
So, inside Oracle Reports, when I try to generate the XML code from a preexisting report, the encoding variable is not set.
Now, I'm trying to understand how to set it, but I didn't find nothing....
Somebody knows where can I find a Report's configuration file in order to set this "encoding" ?
Thanks
Alex

OIM 11.1.1.5: Post Process Event Handler, change password notification

Hi,
Products
OIM 11.1.1.5 BP02
OAM 11.1.1.5
OID 11.1.1.5
Problem
I have written a post-process event handler which fires when a role is assigned to a user. The event handler calls a plugin which uses the UserManager API to generate and change the user's password.
I've tested this by assigning a role to the user via the OIM web console. I can see my log messages indicating that the event handler has fired and that the password has been changed.
However, I expected that when UserManager.changePassword completed, a notification email would then be sent to the user informing them of the new password, but no notification email has been sent.
The email notifications have been set up correctly, because I have changed the same user's password via the OIM web console and successfully received a Reset Password email.
So, my questions are:
1) Am I right in thinking that when you call UserManager.changePassword(), an out-of-the-box ResetPassword email notification should be sent to the user?
2) Has anyone got this working in 11.1.1.5?
Some more detailed info
In my plugin class I'm calling the following from both execute methods (EventResult and BulkEventResult):
char newpasswd[] = new RandomPasswordGeneratorImpl().generatePassword(user);
getUserManager().changePassword(userKey, newpasswd, false, null, true);
logger.info(("Successfully changed password"));
plugin.xml
     <oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
     <plugin
     pluginclass="oracle.iam.PostInsertPlugin"
     version="1.0"
     name="PostInsertPlugin">
     </plugin>
     </plugins>
     </oimplugins>
$OIM_HOME/server/bin/weblogic.properties
          wls_servername = oim_server1
          app = OIMMetadata
          metadata_from_loc=/home/oracle/eventhandlers
          metadata_file=/metadata/roleuser/custom/EventHandlers.xml
/home/oracle/eventhandlers/import/metadata/roleuser/custom/EventHandlers.xml
<?xml version='1.0' encoding='utf-8'?>
<eventhandlers
xmlns="http://www.oracle.com/schema/oim/platform/kernel"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<action-handler
class="oracle.iam.PostInsertPlugin"
entity-type="RoleUser"
operation="CREATE"
name="PostInsertPlugin"
stage="postprocess"
order="1002"
sync="TRUE"/>
</eventhandlers>
There are no errors in the OIM out and diagnostic logs apart from the following which occur at OIM startup:
[2013-01-07T16:29:23.425+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-OIMMigration/EventHandlers.xml and it will not be loaded by kernel.
[2013-01-07T16:29:24.267+00:00] [oim_server1] [ERROR] [IAM-0080075] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 2e903d7ef060ab65:66b2de91:13c15d6d9ce:-8000-0000000000000002,0] [APP: oim#11.1.1.3.0] XML schema validation failed for XML /metadata/iam-features-callbacks/event_configuration/EventHandlers.xml and it will not be loaded by kernel.
Thanks
dty
Edited by: oim_user on Jan 7, 2013 5:37 PM

No notification will be sent if you changepassword using the method from usermanager api.
You have to trigger the resetpassword event manullay in your code.
Here is a sample code to create an event for reset password. Once you create event, invoke it from notification service - notify method.
NotificationEvent event = new NotificationEvent();
String[] receiverUserIds= {userLogin};
event.setUserIds(receiverUserIds);
event.setTemplateName("ResetPasswordNotification");
event.setSender(null);
HashMap<String, Object> resolvedData = new HashMap<String, Object>();
resolvedData.put("userLoginId", userLogin);
event.setParams(resolvedData);

SAPINST failed step "Install Oracle Database (post processing)"

i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeck

Hi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Best Practice Reuse - Post Processing

I have a Query Canvas that I would like to use over and over again in my different form modules. I created an object group and put the group into the object library. All of the code is located in program units.
I want some "post" processing done which differs depending on which form I am reusing it on. I first created a post_query procedure and called it as a hook, but when I use it on a form, it gets overwritten as I update the reusable object group.
I then thought I would just call my post processing after I called the query procedure, but the "post" code is executing BEFORE query code executes - which I am completely confused as to why.
So my basic question is, how do you add "hooks" or pre and post procedures to your reusable code and prevent that code from being overwritten as you update your objects?

Hi,
I also want to know what kind of monitoring scripts I can use to setup as cron jobs to monitor or detect any failure or problems?
To monitor Cluster (OS Level):
I suggest you use a powerful tool "CHM" that already comes with product Grid Infrastructure.
What do you do to configure? Nothing ... Just use.
Cluster Health Monitor (CHM) FAQ [ID 1328466.1]
See this example:
http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-monitor/
To monitor Database:
PERFORMANCE TUNING USING ADVISORS AND MANAGEABILITY FEATURES: AWR, ASH, and ADDM and Sql Tuning Advisor. [ID 276103.1]
The purpose of this article is to illustrate how to use the new 10g manageability features to diagnose
and resolve performance problems in the Oracle Database.
Oracle10g has powerful tools to help the DBA identify and resolve performance issues
without the hassle of analyzing complex statistical data and extensive reports.
Hope this help,
Levi Pereira
Edited by: Levi Pereira on Nov 3, 2011 11:40 PM

Post processing using NI6225

I have 12 NI6225 DAQ Boards (~960 chs). I want to set up LV8 to read Ch1 on all 12 boards ( SW trigger) then Ch2 on all 12 boards, then Ch3 etc. I need to store ALL this data then process it ( post process?) after acquiring all 900 chs. Any suggestions or examples ? In post processing how does LV distinguish between the raw data from Ch1 board 0 and ch 2 board 0 or even ch1 board 1 ?
Make my day and answer this question.
Thanks,
Clint E.

Clint,
In order to do this, you will need 12 individual tasks. Since you have
12 of these, I'm assuming that you have them inside of a PXI chassis.
The attached example is for 2 devices, but you can extend it to more by
repeating the bottom half of the code. You should physically locate the
master device (the one with the reference clock being exported) in slot
2 of your PXI chassis (the source of the star timing). In this code,
all other devices are synchronized with the master device reference
clock. Whenever the master's Start Task VI is called, this will assert
the AI Start Trigger signal on the master device, and all other devices
will use that as a digital trigger to begin their acquisitions. Please
make sure that all other devices execute their Start Task before the
master does (Merge Errors VI would be helpful). This process will
result in each of your devices acquiring samples at the exact same
time. The output of each analog read will output an array of waveforms,
with each waveform corresponding to the samples acquired on a single
channel of that device. To specify the order with which the channels
are scanned, order them that way in the physical channel control. For
instance Dev1/ai1,Dev2/ai3, Dev1/ai5 will acquire one sample from
channel 1, channel 3, and channel 5, then repeat. Please let me know if
this is not what you were asking, or if you have any additional
questions.
Hope this helps,
Message Edited by Voltage Viper on 12-02-2005 12:13 PM
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments
Attachments:
M Series Multi-Device Synch - Shared Ref CLK.vi ‏60 KB

Unable to find an Output Post Processor service to post-process request

Hi experts,
Users complaining that they could not able to generate the PDF.
User Complaint:
The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps that we tried:
1. Increased the OPP process to 16
2. Increased Concurrent:OPP Response Timeout to 750
3. There is no issue in manager log file.
4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
5. Restarted CM. Ran CMclean.
6. Re: Output Post Processor
7.Unable to View pdf Output File Created by XML Publisher
But we dont find any solutions over the above.
Log:
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='8414037'
p_trx_number_high='8414037'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='Y'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00500: DEBUG: About to build WHERE clause.
MSG-00500: DEBUG: WHERE clause built.
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00500: DEBUG: Table 1:          AR_ADJUSTMENTS                         COM_ADJ,
        AR_PAYMENT_SCHEDULES                   P,
        RA_CUST_TRX_LINE_GL_DIST               REC,
        RA_CUSTOMER_TRX                        A,
        HZ_CUST_ACCOUNTS                       B,
        RA_TERMS                               T,
        RA_TERMS_LINES                         TL,
        RA_CUST_TRX_TYPES                      TYPES,
        AR_LOOKUPS                             L_TYPES,
        HZ_PARTIES                        PARTY,
        HZ_CUST_ACCT_SITES                     A_BILL,
        HZ_PARTY_SITES                         PARTY_SITE,
        HZ_LOCATIONS                           LOC,
        HZ_CUST_SITE_USES                      U_BILL
MSG-00500: DEBUG: Table 2:          RA_TERMS_LINES                         TL,
        RA_CUST_TRX_TYPES                      TYPES,
        AR_LOOKUPS                             L_TYPES,
    HZ_CUST_ACCOUNTS                       B,
        HZ_PARTIES                        PARTY,
        HZ_CUST_SITE_USES                      U_BILL,
        HZ_CUST_ACCT_SITES                     A_BILL,
        HZ_PARTY_SITES                         PARTY_SITE,
        HZ_LOCATIONS                           LOC,
        AR_ADJUSTMENTS                         COM_ADJ,
        RA_CUSTOMER_TRX                        A,
        AR_PAYMENT_SCHEDULES                   P,
        RA_TERMS                               T
MSG-00500: DEBUG: Where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
AND REC.LATEST_REC_FLAG = 'Y'
AND REC.ACCOUNT_CLASS   = 'REC'
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                   'INV', 0,
             = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = PARTY.PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND A.TERM_ID = TL.TERM_ID(+)
AND A.TERM_ID = T.TERM_ID(+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
MSG-00500: DEBUG: Where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                   'INV', 0,
             = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
AND B.PARTY_ID = PARTY.PARTY_ID
AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL.TERM_ID(+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: Remit To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        11000 IH-35 NORTH
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:            TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code:      78753
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     US
MSG-05000: DEBUG: Customer Name:
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       6
MSG-05000: DEBUG: Height Max:       6
MSG-05000: DEBUG: Remit To Formatted...   11000 IH-35 NORTH
AUSTIN TX 78753
MSG-05000: DEBUG: Bill To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province:         SASKATCHEWAN
MSG-05000: DEBUG: Postal Code:      S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     CA
MSG-05000: DEBUG: Customer Name:    VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:       VAUGHN
MSG-05000: DEBUG: Last Name:        FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       8
MSG-05000: DEBUG: Height Max:       8
MSG-05000: DEBUG: Bill To Formatted... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: Ship To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province:         SASKATCHEWAN
MSG-05000: DEBUG: Postal Code:      S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     CA
MSG-05000: DEBUG: Customer Name:    VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       8
MSG-05000: DEBUG: Height Max:       8
MSG-05000: DEBUG: Ship To Formatted...   VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 25854362.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT   -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Can any one please guide me for this issue.?.
Thanks,
Vasanth

Hussein,
FNDOPP log file
9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
[9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
ORA-06512: at line 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
[9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
[GC 20321K->4065K(63360K), 0.0137050 secs]
Thanks,
Vasanth

Post Processing records in BAPI_PRODORDCONF_CREATE_TT

Hi All,
I am using BAPI_PRODORDCONF_CREATE_TT for Production Confirmation with Auto Goods receipt(GR) Feature.
But, in case any error in goods movement occurs system creates a post processing record( Visible in transaction COGI).
We don't want entires in COGI.In case, any error occurs system should terminate the session. The same control is maintain in SPRO. But, BAPI overrules that.
Kindly let me know which settings to be used in BAPI, to avoid COGI.
In Post Wrong entries field of BAPI , I have used ' " ( Blank) value.
Please suggest.

Hi Stuti,
What I suggest you is to use 2 BAPI's instead of 1.
First use BAPI_GOODSMVT_CREATE to carry out goods movements.
If this BAPI is successful then only execute the BAPI you are using only to carrying out the confirmations
This is the best way to control your confirmation for failed goods movements.
Regards,
Yogesh

Residual item column in post processing F-28 or F-32

Hi
When i go to F-28 or F-32 in the post processing screen in the Residual items Tab i could not see residual items column after net amount column, instead i am seing payment item Column.
How can i fix this? In residual item Tab i typically used to see residual items column.
Can some one please advice on how to get this?
Thanks.

Hi,
After click on process open items button in F-28, Click on EDITING OPTION Button.Here you can deselect the check box ENTER PAYMENT AMOUNTS FOR RESIDUAL ITEMS. I hope your problem solved.
Regards
Maruthi.

Problem caling ConcRequest with Post Processing from code using fnd_request

Gurus,
Background:
I am working on an XML Publihser report using Reports6i. I have defined a Report in Applications. This report generates XML data and as part of post processing I specify the template to pick under "Upon Completion" Section. The report works fine when I submit it from SRS window.
(This is possible because with XML Publisher installed, we can specify a template for any RDF report and its processed as part of Post processing)
Now I have to invoke the same report programmatically. I am using
fnd_request.submit_request (application => 'PO',
program => 'XXTPOREP',
description => '',
start_time => '',
sub_request => FALSE,
argument1 => 'R',
argument2 => CHR (0),
argument3 => CHR (0),
argument4 => CHR (0),
argument5 => CHR (0),
My query is how do I specify the parameters for post processing the request to ensure that the output is generated with the template .
Thanks in Advance

before submitting the request add this line
v_request_status := Fnd_Request.add_layout('PO','XXTPOREP','en','US','PDF');
This is with the assumption that you need a pdf document as the output and the template language and territory is English and United States
Message was edited by:
user585821 on 19 July 2007

Post-processing request failed one or more post processing action failed .

Beginning post-processing of request 3064071 on node SURYA at 03-NOV-2008 17:07:20.
Post-processing of request 3064071 failed at 03-NOV-2008 17:07:21 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
oppserver log file:
11/4/08 9:17:55 PM] [main] Starting GSF service with concurrent process id = 1100320.
[11/4/08 9:17:55 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[11/4/08 9:17:57 PM] [Thread-21] Service thread starting up.
[11/4/08 9:17:57 PM] [Thread-22] Service thread starting up.
[11/4/08 9:22:48 PM] [OPPServiceThread0] Post-processing request 3066109.
[11/4/08 9:22:48 PM] [1100320:RT3066109] Executing post-processing actions for request 3066109.
[11/4/08 9:22:49 PM] [1100320:RT3066109] Starting XML Publisher post-processing action.
[11/4/08 9:22:49 PM] [1100320:RT3066109]
Template code: XXINA_VIOLET_SUPP_EXE
Template app: SQLAP
Language: en
Territory: US
Output type: PDF
[110408_092250799][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[110408_092250800][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[110408_092250800][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[110408_092250801][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[60]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[UTF8]
[110408_092250801][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[110408_092250801][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=surya.inatech.com)(PORT=1531)))(CONNECT_DATA=(SID=TRAIN)))]
[110408_092250801][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[110408_092250802][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[110408_092250802][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[true]
[110408_092250802][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[110408_092250802][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[1]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[110408_092250808][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[110408_092250809][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[110408_092250809][][EXCEPTION] [DEBUG] [APPLTMP]:[u02/oracle/traincomn/temp]
[110408_092250809][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[110408_092250809][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[110408_092250809][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[110408_092250809][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[110408_092250811][][EXCEPTION] [DEBUG] [dbcfile]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250811][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[110408_092250811][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[110408_092250812][][EXCEPTION] [DEBUG] [path.separator]:[:]
[110408_092250812][][EXCEPTION] [DEBUG] [APPLCSF]:[u02/oracle/traincomn/admin]
[110408_092250812][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[110408_092250812][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[110408_092250812][][EXCEPTION] [DEBUG] [user.country]:[US]
[110408_092250812][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[110408_092250812][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[110408_092250813][][EXCEPTION] [DEBUG] [user.dir]:[u02/oracle/traincomn/admin/log/TRAIN_surya]
[110408_092250813][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[110408_092250813][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[110408_092250813][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[110408_092250813][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[110408_092250813][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250813][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[tmp]
[110408_092250813][][EXCEPTION] [DEBUG] [line.separator]:[
[110408_092250813][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[110408_092250813][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[110408_092250813][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[110408_092250813][][EXCEPTION] [DEBUG] [cpid]:[1100320]
[110408_092250814][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[110408_092250814][][EXCEPTION] [DEBUG] [java.library.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u02/oracle/trainora/iAS/lib:/u02/oracle/trainora/8.0.6/network/jre11/lib/i686/native_threads:/u02/oracle/trainora/8.0.6/network/jre11/lib/linux/native_threads:/u01/oracle/trainappl/cz/11.5.0/bin:/u02/oracle/trainora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[110408_092250814][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[110408_092250814][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[110408_092250814][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[110408_092250815][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-34.EL]
[110408_092250815][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[110408_092250815][][EXCEPTION] [DEBUG] [user.home]:[home/oracle]
[110408_092250815][][EXCEPTION] [DEBUG] [user.timezone]:[Asia/Calcutta]
[110408_092250815][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[110408_092250815][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[110408_092250815][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[110408_092250815][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[110408_092250815][][EXCEPTION] [DEBUG] [java.class.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/oracle/traincomn/java/appsborg2.zip:/u02/oracle/traincomn/java/apps.zip:/u02/oracle/trainora/8.0.6/forms60/java:/u02/oracle/traincomn/java]
[110408_092250815][][EXCEPTION] [DEBUG] [user.name]:[oracle]
[110408_092250815][][EXCEPTION] [DEBUG] [DBCFILE]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250816][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[110408_092250816][][EXCEPTION] [DEBUG] [java.home]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre]
[110408_092250816][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[110408_092250816][][EXCEPTION] [DEBUG] [user.language]:[en]
[110408_092250816][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[110408_092250816][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[110408_092250816][][EXCEPTION] [DEBUG] [logfile]:[u02/oracle/traincomn/admin/log/TRAIN_surya/FNDOPP1100320.txt]
[110408_092250816][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[110408_092250816][][EXCEPTION] [DEBUG] [java.ext.dirs]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[110408_092250816][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[110408_092250817][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[110408_092250817][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[110408_092250817][][EXCEPTION] [DEBUG] [file.separator]:[]
[110408_092250817][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[110408_092250817][][EXCEPTION] [DEBUG] [APPLOUT]:[out/TRAIN_surya]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[11/4/08 9:23:00 PM] [UNEXPECTED] [1100320:RT3066109] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.UnsupportedEncodingException: &Encoding
     at sun.io.Converters.getConverterClass(Converters.java:215)
     at sun.io.Converters.newConverter(Converters.java:248)
     at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
     at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
     at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
     at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
     ... 17 more
[11/4/08 9:23:00 PM] [1100320:RT3066109] Completed post-processing actions for request 3066109.
[11/5/08 11:00:13 AM] [OPPServiceThread0] Post-processing request 3067075.
[11/5/08 11:00:15 AM] [1100320:RT3067075] Executing post-processing actions for request 3067075.
[11/5/08 11:00:15 AM] [1100320:RT3067075] Starting XML Publisher post-processing action.
[11/5/08 11:00:15 AM] [1100320:RT3067075]
Template code: XXINA_XML_TEST_TEMPLATE
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 11:00:58 AM] [UNEXPECTED] [1100320:RT3067075] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.UnsupportedEncodingException: &Encoding
     at sun.io.Converters.getConverterClass(Converters.java:215)
     at sun.io.Converters.newConverter(Converters.java:248)
     at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
     at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
     at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
     at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
     ... 17 more
[11/5/08 11:01:00 AM] [1100320:RT3067075] Completed post-processing actions for request 3067075.
[11/5/08 12:20:30 PM] [OPPServiceThread1] Post-processing request 3067153.
[11/5/08 12:20:30 PM] [1100320:RT3067153] Executing post-processing actions for request 3067153.
[11/5/08 12:20:30 PM] [1100320:RT3067153] Starting XML Publisher post-processing action.
[11/5/08 12:20:30 PM] [1100320:RT3067153]
Template code: XXINA_XML_TRANS
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 12:20:37 PM] [UNEXPECTED] [1100320:RT3067153] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.FileNotFoundException: /D:\Inahome\Raja Ramesh\Official\XML Publisher -Internal Project\SD - XML Publisher\31-oct\subtemp.rtf (No such file or directory)
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 17 more
[11/5/08 12:20:38 PM] [1100320:RT3067153] Completed post-processing actions for request 3067153.
[11/5/08 5:32:38 PM] [OPPServiceThread0] Post-processing request 3067574.
[11/5/08 5:32:39 PM] [1100320:RT3067574] Executing post-processing actions for request 3067574.
[11/5/08 5:32:39 PM] [1100320:RT3067574] Starting XML Publisher post-processing action.
[11/5/08 5:32:39 PM] [1100320:RT3067574]
Template code: XXINA_XML_TEST
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 5:33:11 PM] [1100320:RT3067574] XML Publisher post-processing action complete.
[11/5/08 5:33:11 PM] [1100320:RT3067574] Completed post-processing actions for request 3067574.
[11/5/08 5:36:51 PM] [OPPServiceThread1] Post-processing request 3067581.
[11/5/08 5:36:51 PM] [1100320:RT3067581] Executing post-processing actions for request 3067581.
[11/5/08 5:36:51 PM] [1100320:RT3067581] Starting XML Publisher post-processing action.
[11/5/08 5:36:51 PM] [1100320:RT3067581]
Template code: XXINA_XML_TEST
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 5:36:56 PM] [1100320:RT3067581] XML Publisher post-processing action complete.
[11/5/08 5:36:56 PM] [1100320:RT3067581] Completed post-processing actions for request 3067581.
getting this error in OPP server log file
any solutions ?
regards,
Arul.

Caused by: java.io.FileNotFoundException: /D:\Inahome\Raja Ramesh\Official\XML Publisher -Internal Project\SD - XML Publisher\31-oct\subtemp.rtf (No such file or directory)Did you verify this?

Automated post processing of PDFs

The PDFs generated by RoboHelp are not production-ready in my
opinion, because:
- All bookmarks are expanded by default.
Acrobat Pro does not include a feature to collapse all
bookmarks at once (you can only collapse top-level bookmarks). You
have to collapse bookmarks either manually, or use the free Acrobat
plug-in "closebm" from Planet PDF. This plugin works with Acrobat 8
BTW.
- The initial page mode of the PDF generated with RH is set
to "Page Only". This means that the bookmarks panel is not
displayed when opening the PDF. My preferred setting is to show the
available bookmarks when a PDF is opened (Acrobat setting
"Bookmarks Panel and Page").
Because we run everything in batch (compile help, publish
help) and because we do not wish to buy a full Acrobat license for
every author/publisher (the add-on that comes with RH should be
enough), I have created a solution that automatically collapses
bookmarks, sets the initial view to show bookmarks, and finally
linearizes (Fast Web View) the PDF.
You don't need Acrobat to do this and all auxiliary (and
free) programs to post process are in the sample project that you
can download from
here:
After unzipping the sample project, double-click the file
"PostProcessPDF.bat". This batch file will update the
"Printed_Documentation.pdf" in the folder "PDF Input" and put 2 new
versions in the folder "PDF Output":
1. BookmarksCollapsed.pdf
2. BookmarksCollapsed_Linearized.pdf
The following steps are performed in the batch file:
- The bookmarks from the original RH PDF
("Printed_Documentation.pdf") are exported to XML using "iText
Toolbox";
- The resulting XML file is manipulated with "replace.exe"
(just a free command line search/replace tool that I found), so
that bookmarks are set to collapse;
- The manipulated XML file + original
"Printed_Documentation.pdf" are then combined in "iText Toolbox" to
create the new "1. BookmarksCollapsed.pdf" in folder "PDF Output";
- The "1. BookmarksCollapsed.pdf" in folder "PDF Output" is
processed with Ghostscript's "pdfopt" to linearize the PDF again.
When you change a PDF and just "Save" a PDF (also in Acrobat), Fast
Web View is gone. In Acrobat you have to 'Save As' or use the "PDF
Optimizer" to linearize the PDF again.
The sample project is pretty large (11 MB), but this is
because Ghostscript and iText Toolbox are included.
BTW, you must have Java installed to use "iText Toolbox".
Have fun,
Herman

I thought that because Ghostscript is command-line based, I
could just add the files to my sample project.
But apparently there are some dependencies, and you have to
install Ghostscript to use my sample files.
If you want to play around with my sample files, install
Ghostscript to the folder 'RH' (remove folder 'gs' first). It will
then install to folder RH\gs, where the batch file is expecting the
Ghostscript files.
Latest version of Ghostscript can be found here:
http://sourceforge.net/project/downloading.php?group_id=1897&use_mirror=heanet&filename=gs 862w32.exe&73395111

CE 71 Productive Edition SR5 post processing

Similar Messages

Maybe you are looking for