CE supported features

Hi All,
I would like to understand whether the following features are supported in ACNS
1. Adding multiple .pac files to the CE, so that different clients can choose different pac files. I did refer to the below but didn't answer my questions
http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a0080394d2c.html#wp1412653
2. Does the HTTPS proxy tunneling feature support adding domain names instead of the ip address? The CLI allows the user to add hostname, but if you see the configuration it changes to an IP. I want the CE to resolve for IP address for each request so that the Load balancing configured on the server becomes effective.
3. Are there any specific ACLs for HTTPS proxy tunneling feature. For example i need to have control over who can use the above tunneling service, by blocking certain ip address.
4. how do i manunally remove the cached contents from the CE.
Any help is appreciated.
Arun

HI Arun,
find below an answers to one of your questions:
1) Yes it supports multiple proxypac (see http://www.cisco.com/en/US/customer/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a008040f5d6.html#wp1041374
From my point of view you just have to upload several files(different file names for sure) and configure your clients to request the wanted one (proxy1.pac ... proxyn.pac)
Btw why do you need several different files isn't it possible to the detect the client by IP-range or any other credential and give him the specific proxy settings?
If this is possible one proxy.pac would be enough.
Kind Regards,
Joerg

Similar Messages

The SSL support feature is not properly configured. Https is not available.

Hi all
We get the following warning message even though we are not using SSL.
"The SSL support feature is not properly configured. Https is not available."
I tried with the following parameter set to false in the MobileEngine.config, still the same warning occurs for each synchronization done. But the sync works fine.
MobileEngine.Security.SSLSupport=false
Had any body come accross this one, if so please let me know.
Thanks
Raj

Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter MobileEngine.Security.SSLSupport=false but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar

Digital Publishing Suite Help | Supported feature list

This question was posted in response to the following article: http://helpx.adobe.com/digital-publishing-suite/help/supported-feature-list.html

Has this chart been updated for V27?

Wism version 2 support feature "enable NAT address?

hi all
i would like to ask some question that wism v 2 support feature nat address? because i see in configuration guide it just tell about wlc 5508. So, please give me or share information.
Thanks.

Well that is the thing... will it work if you are using multiple ap managers? What I was told is that the ap's still need to communicate with the management interface with the 2504, 5508... the newer stuff. Its not like the 4400's where if you break up the management and the ap manager, you can actually isolate the ap manager on a vlan with the aps and the aps will communicate with the ap manager interface only. The newer controllers don't function like that. We had a client that migrated and wanted to keep everything the same.... well it didn't work. We had to enable routing between the ap manager subnet and the management. I never split them apart and don't know why people do
Maybe we can get George to test it out
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Supported feature or Luck? (Multiple users in LITE)

The docs led me to believe that LITE is a single user database.
However, if you create the database on a system that is shared, then define within ODBC ADMIN the connection to the shared database it will allow you to connect from any machine that has access to the shared directory that has the database (and of course has LITE installed).
Is this a supported feature or just luck?
Thanks, DJ

~Zork~ wrote:
Thanks for the quick reply. But when I log on under the standard account is when I only see blank finder windows. Any other ideas?
I don't think we're on the same page. When signed-on as the standard user, open a Finder window to +that user's+ home folder, then go into TM. You should then see +that user's+ backups, for all backups since that user was created.
If all you see is the +Today (Now)+ window, that's an occasional bug in Snow Leopard. Just exit TM and try again.

Mobile browser support feature requires sign in.

We have a site that is largely anonymous and public facing. I tried enabling the "Mobile browser support" feature at the site level, which provides a much better mobile experience. However, when users are redirected to the mobile-friendly
site, they encounter a sign-in challenge before the page loads. This is not the desired behavior in our case. Is there a known workaround for this?

Hi Josh,
Based on your description, my understanding is that the users got authentication prompt when accessing SharePoint site which was set to allow anonymous access in mobile device.
I recommend to use PowerShell command to check if the site has ViewFormPagesLockdown enabled: get-spfeature -site
http://sitecollectionURL
If ViewFormPagesLockDown is listed, it is enabled.
Then I recommend to disable it:
$lockdown = get-spfeature viewformpageslockdown
disable-spfeature $lockdown -url http://sitecollectionURL
If anonymous is already setup, you may need to disable\re-enable anonymous on the site.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

4x Supported feature- Multiple Org

Hello everyone,
One of the supported features in Discoverer 4.x is Multiple Organization while running against an Oracle Application Database. How does Discoverer support this specifically ? I know what Multi Org in Oracle Apps world is. But how does Discoverer behave while working with an Application database with Multi-org ? Thanks a lot!
Akhil Choudhury
Reference: Oracle Discoverer Plus, User's Guide, 4.1 For windows, Part no: A86732-01

Discoverer creates an Apps mode EUL that uses the Apps Security to view data. Thus the Data Security is handled by the Apps Security model.
C
<BLOCKQUOTE>quote:<HR>Originally posted by Akhil Choudhury ([email protected]):
Hello everyone,
One of the supported features in Discoverer 4.x is Multiple Organization while running against an Oracle Application Database. How does Discoverer support this specifically ? I know what Multi Org in Oracle Apps world is. But how does Discoverer behave while working with an Application database with Multi-org ? Thanks a lot!
Akhil Choudhury
Reference: Oracle Discoverer Plus, User's Guide, 4.1 For windows, Part no: A86732-01 <HR></BLOCKQUOTE>
null

Update the supported features list

I suggest that you update the help guide about supported features.
Recently I was misguided because of that list on supported features, about horizontal swipe, flattened articles, on Android devices.
The list tells that its not supported on Android, but actually it is.
http://helpx.adobe.com/digital-publishing-suite/help/supported-feature-list.html

Sorry, I missed that one. I updated the help article. Thanks for reporting the error.

LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows - Supported Features

Hi,
Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows]
1) Is there a limit on the size of the exe which can be run on it?
2) Will this support additional modules like DAQ etc.,? Or do we have to chose the regular installer ( 170 Mb ) for that purpose?
3) If a list of what it does or does not support is available, it would be extremely helpful.
Thanks In advance.
Regards,
Vijay

Anand,
I did go through both the links that you had sent earlier before posting on the forum. For eaxample refer the following link where it says,
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1599
It does not contain the full run-time engine, but will allow some executables to run.
1) What do they mean by 'some' executables. Is there a list of yay's and no's available?
2) Can someone from NI reply to this and shed more knowledge?
Regards,
Vijay

SPA-1X10GE-L-V2 AND 4-10GBE-WL-XFP SUPPORTED FEATURES

Hello!
I am trying to find documents that prove the following:
4-10GBE-WL-XFP (with CRS-FP40 and XC-L2L3VPN)
SPA-1X10GE-L-V2 (with CRS-MSC-40G-B AND CRS1-SIP-800)
FEATURES NEEDED:
-802.1q encapsulation for L2VPN (EoMPLS & VPLS), L3 and L3VPN
-802.3ad and QinQ for L2VPN (EoMPLS)
-Support complete separation of QoS EXP, TOS, DSCP per interface
-Support complete separation of QoS EXP, TOS, DSCP per VLAN.
I am still researching to see if I can find supporting cisco documents.
Thanks in advance,
Rodrigo

Hi Rashed,
I see that your list includes Cisco Insight Reporter and Cisco Service Control Subscriber Manager. Those are SW pieces which will require some servers to run them. You can review the following documents to have an idea of the SW and HW requirements for the servers required to run those components:
- Insight:
http://www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/insight/rel34/install_guide/insight_34_ig.pdf
- Subscriber Manager:
www.cisco.com/en/US/docs/cable/serv_exch/serv_control/broadband_app/rel38x/smug/Installation_and_Upgrading.html
If you have any doubt, I would strongly suggest you to reach out to your local Cisco Acount Team for these type of questions. They will be able to provide you proper support and guidance for these type of inquires.
Best regards.

Actually supported features in JVM

My phone has PersonalJava, so it should not support SWING.... but I found out a method to get it supporting it, without asking the phone vendor to release a new JVM version: I had just to copy swingall.jar from an old SDK and copy it to the phone!
So, how can I really know which are the REAL capabilities of my JVM?!? Being it designed for limited-memory devices, it has been stripped down.... but as my phone/PDA memory can be expanded up to 1 GB (!), I need no stripping down, I want ALL features enabled! How can I accomplish this?!?

You can do Edit in place with autoversioning enable. Which will create version in contendb also checkout/checkin automatically.
Regards,
Jigar

Does Cisco7200VXR support feature Q-in-Q VLAN tag termination?

There is only 10000ESR platform support announced in feature guide and no information in Feature Navigator tool...
http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps5207/products_feature_guide09186a00801f0f4a.html

Hi there,
Well.. it seems this feature has several names:
"Cisco IOS Software Releases 12.3 T - IEEE 802.1Q-in-Q VLAN Tag Termination"
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801f0f4a.html
"Cisco IOS Software Releases 12.0 S - Stacked VLAN Processing"
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a008021b9ee.html
But I can't find any reference to the 7200 having support for it... though many others has it.. mainly switches.. not too surprising.. :)
Did it help?

Need security cert support - feature request

The iOS version of Adobe Reader does support password-based encryption, but not certificate-based encryption. We need certificate-based encryption for certain business functions. When I tried reading a pdf file encrypted with a certificate on the iPad, Adobe Reader for iOS said, “The document has features that are not supported in this version of Adobe Reader”. Please consider this a feature request to add this capability.

Hi Josh,
Thanks for your feedback. But can you let us know which version of MRD client you are using on which device as to clarify and research more regarding your case.
Thanks for your understanding and Support!
Regards.
Dharmesh Solanki
TechNet Community Support

What are the supported feature for LYNC Server 2013 WITHOUT Telephony

Hi
I have a new customer who is asking for LYNC Server 2013 without to use VoIP Support.
The would like to use the LYNC-SKYPE connectivity but without LYNC calls.
Most of their internal users are using SKYPE.
The Question is now, what Features are possible for example:
FEATURE-LIST
See other’s presence
Manage own presence
See presence in Office
Contact management
Contact card
PC-PC and multiparty IM
PC-PC and multiparty file transfer
Persistent Chat
PC-to-PC computer audio calling
PC-to-PC computer video calling
PC-to-PC presence display, IM, audio, and video with Skype users
But what of the above feature list is possible without using VoIP ??
And how works that LYNC WebApp Client without VoIP? Is it possible to route Audio/Video over the internet by using that LYNC WebApp Client in LYNC 2013??
Thanks in advance ;-)
Kind regards
Michael
Kind regards Michael Damaschke

All of that is possible without PSTN connectivity or the plus cal.
When you say VoIP, do you mean audio chatting over TCP/IP in the purest form, or do you mean specifically telephone calls?
Technially PC-to-PC computer audio calling is VoIP, or voice over IP, but if you're talking about connecting it to a PBX or the phone network, you don't need it for any of the above. It works wonderfully and is quite a bit cheaper without it due to
fact that you won't need to license the plus cal for enterprise voice or the Exchange enterprise cal for voicemail.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Does AP1131G support feature 'multiple ssid'?

Hello
I've checked in feature navigator and I've seen AP1131G doesn't support multiple ssid feature. It's right?
If yes, What is replacement AP for AP1121?
I can't order old good AP1121 so I need good replacement for it.
Thank you!

Hi Pavel,
Just to add a clip to the good tips from Dan and Lucien (+5 points each guys :)
From the 1130 Quick Start Guide;
When the access point configuration is set to factory defaults, the first SSID that you create by using the Express Security page overwrites the default SSID, which has no security settings. The SSIDs that you create appear in the SSID table at the bottom of the page.** You can create up to 16 SSIDs on the access point.
http://www.cisco.com/en/US/docs/wireless/access_point/1130/quick/guide/ap1130qs.html#wp32816
Hope this helps!
Rob

CE supported features

Similar Messages

Maybe you are looking for