Cell Border (Properly selected, finished) won't stay

Certain cells in my document refuse to be bordered. It's not that I'm not finishing it and deselecting before I've got the color or weight properly set, it's that the inspector itself won't let me change. I move from "none" to any line type, but it flips immediately back to "none". This is also happening when I try to set the color- it reverts straight back to gray and won't even let me move the slider. I just get flicker on the color wheel.
Anybody got an idea?

Never got this behavior and have no idea about it.
May you send a sample file to my mailbox ?
Click my blue name to get my address.
Yvan KOENIG (VALLAURIS, France) lundi 15 novembre 2010 09:34:04

Similar Messages

Smartforms - Is it possible to Customize Cell Border In Template in 4.6C

Hi,
In smartforms, i know that Customizing Cell border is possible with node type TEMPLATE in version 6.20
Our system is 4.6C
But there are many differences between 4.6C and 6.20 about SMARTFORMS.
Is there a way to specify custom cell border without "Select Pattern" option with node type TEMPLATE in 4.6C
thanks
ibrahim

Hi,
As you identify there are some large differences between Smartforms in 4.6c and 6.20. So there is no equivalent of the cell-specific borders in 4.6c
Regards,
Nick

New monitor profile won't stay selected

I've been using Snow Leopard for 2 years (Mac Mini) and had two different monitors in that time. I just got an Asus VE228 monitor and it was really bright and washed out. So I made a setting that looks good but it won't stay selected after a reboot.
When opening the System Preferences and going to the Display section, it switches to the right profile the moment I click on the Color tab. I have to do this every time I reboot.
Repairing permissions did not fix it. I tried making a new user and it does the same thing with that user. I tried a system reinstall and it didn't help.
I tried a different mac mini with mountain lion and it works fine with this monitor.
Can anybody help me get my monitor setting to stick?
Thanks,
Scott

Ok I have a new plan to do this.
It would work if Spry didn't keep overwriting my colours.
I have spry:odd and spry:even set on this table. I have also now removed spry:select
When someone clicks on something I make a note of the rowID and store that globally. I also set the clicked row to have the correct color and have added an id to all the rows which includes their rowID so I can easily do a document.getElementByID to find the row that should be selected.
Now I have added an onPostLoad to the notification which finds the correct row by the id I have set and then sets the color. If I put in an alert directly after I can see that this has worked.
The problem is that spry then overwrites the background colour with the spry:odd and spry:even colours.
So... what I need to know now, is how I can do something to the row directly after spry has finished setting colours.

Downloaded new ios7 and new itunes 11.1 and now iphone 4 won't finish syncing - just stays on last step and never finishes or cancels on its own. Tried reinstalling itunes with no success.

Downloaded new ios7 and new itunes 11.1 and now iphone 4 won't finish syncing - just stays on last step and never finishes or cancels on its own. Tried reinstalling itunes with no success.

I have the same problem.. latest version of iTunes (11.1.5) and latest version of ios (7.1) but it gets stuck at "waiting for changes to be applied" and I can't cancel the sync manually. It doesn't cancel on it's own either (at least not the 8 hours over night that it was syncing) and if I unmount the phone then the phone keeps the sync going (the little spinning arrows in the upper left corner) and doesn't recognize that it's been disconnected..
I've tried restoring the phone (with little success, managed to get one more song on there) and syncing over wi-fi but nothing seems to work. Any thoughts, anyone?

Show date and time in menu bar won't stay selected

Using 10.6.7 with all updates as of the time I am writing this.
Show date and time in menu bar is unselected and unselectable. When I select it (click it) it will unselect itself. I will see the checkmark for 1/2 a second, but won't stay selected.
I've reparied permissions in the Disk Utility as described by a similar post (on an older version of the OS) with no luck.
At a little bit of a loss. Spending the mandatory 30 minutes with various forms of Google searches with no luck.
Looking for new ideas other than an OS restore.
David

Looking for new ideas other than an OS restore.
Restart?

Selected Table Cell Border in 1.4.2

Hi All!!
I am facing a problem with JDK 1.4.2_01 & Windows L&F. I am unable to see the yellow border around the selected cell in JTable. Was working fine with 1.4.1_03.
A bug with id: 4674205 was reported with 1.4.0 stating :
" In the Windows Look and Feel, the selected cell in a JTree or JTable is framed with a yellow rectangle. To accurately match the real Windows UI, it should be a black and white dotted rectangle instead. (This was part of bug 4268204,which was marked fixed, but this part hasn't been fixed.) This behavior was fixed for JList, but not JTree or JTable. "
Now it has been fixed and closed.
May be they might have removed setting of yellow border for the selected cell to match with native windows UI.
But selected cell border is very much necessary for my project. Can any one please suggest me a workaround.
With Regards,
LRK

Hi Sai!
Thanks for your reply. It will not be feasible in my application as it already has huge number of tables with some of them already having complex renderers and editors.
I was looking at something which i can set globally so that it will reflect to all of the tables in the application in a particular L&F.
I tried setting
UIManager.getDefaults().put("Table.focusCellHighlightBorder",Color.yellow);
and
UIManager.put("Table.focusCellHighlightBorder",Color.yellow);
But no luck.
Any other inputs are most welcome.
With Regards,
LRK

Finder won't stay selected if other programs open and can't open new window

I have just noticed a new problem. If other programs are open, Finder won't stay selected program. If I alt tab to it or click on it in dock, it shows on menu bar for a half second and goes away. If I right click on icon in dock and select open new window, it will not do so. If I select a folder from the desktop, it opens in Finder with no problem and I can move within the Finder at will.
I have updated all software. I am running the current Macbook Pro 15in. No other problems noted so far.
Any ideas? Thanks in advance

Hi Sleddaddyfro, and a warm welcome to the forums!
Do you have another account you can log into?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Stuffit AVR has been a big one, if you have that use the Pref Pane to turn it off, but others have been implicated too. Check System Preferences for a Stuffit Pref Pane and disable AVR.

MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds. This only happens when using the external monitor. Does anyone have any suggestions?

Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

Won't stay connected to network

Not sure if this is a Safari problem or internal with my Mac somehow. I have a G5 and I connect to a router for wireless internet. I also connect to my printer through the same router.
I've noticed sometimes when I exit safari and then come back to the computer later and click the Safari Icon it sometimes doesn't connect to the internet without me having to go through a "Network Diagnostic" test. Then usually what happens is about half way through the diagnostics my internet home page will load, or I'll get to the end of the diagnostic and it says "your connection is working" and then the home page will appear.
The problem I have now is that my computer won't stay connected to my printer. If I try to print a document or photo it does not send it to the printer, however if I turn Safari on so I know I'm connected to the network then all of a sudden the printer will work.
I guess somehow my computer is automatically disconnecting from my network and I'm not sure why or how to fix it. I've gone into the network preferences an it always shows "airport" is on and I always show all "solid" in the little icon at the top that looks like a "fan".
Any thoughts here on why my comp doesn't seem to stay connected to the network?
Thank you.

HI,
Try updating your system software to 10.5.8 with the combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
After the installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Numbers won't stay open

When I open Numbers, it won't stay open. It opens, I select the document I want to edit, click on a cell and Numbers shuts down. It also shuts down if it's open and I click on a window for another app. No crash message or anything like that. Just - poof, and it's gone. Thanks for your help.

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
If that still gives problems then create a new profile.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
See also:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Safari won't work (bookmarks select but won't unselect)

My problem is that when I click on any bookmark in Safari, such as those in my Bookmarks Bar, the page stays blank/white, and the bookmark stays with a permanent grey oval around it, as thought it was selected, but won't unselect when you let go of the click. I can go through the menus and select any command, and can bring up the Downloads window for instance. So it is not completely unresponsive, but it won't actually browse the web. I can try to open a file, but when I get to the open dialog, it won't let me select anything. This happens in all users accounts, and was not corrected by resetting Safari, or by trashing the Safari cache, or trashing prefs, or repairing permissions, or even running single use mode to repair the directory. Firefox works fine, so it is not as network problem. Any ideas?

Since this happens to all user accounts, there are two paths you can try.
Path one - reapply the 10.4.8 combo update. "Repair permissions" using Disk Utility in your Utilities folder after the install/restart. I suggest not using the computer during the Install phase.
Sometimes the reinstall corrects system files which may be corrupted and affecting Safari.
If no go, then
Path two - Reinstall Safari. Have a look at this Apple article for installing other software, including Safari, from the Tiger DVD - see the section titled More custom reinstallation options with Mac OS X 10.4.
You'll need to move Safari.app in your applications folder to the trash. Also, in your HD>Library>Receipts folder, move the Safari.pkg file to the trash.
As a precaution, prior to reinstalling Safari, move your Safari Folder, found in your User Library to the Desktop. It has your bookmarks, history etc. Once the reinstall is completed, move the folder back to its original location writing over the newly created folder.
Remember too, the version of Safari you install will be specific to the Version on your installer DVD. Therefore, either run Software Update and see if Safari is updated. If not, you can reapply once again the 10.4.8 combined update. Repair permissions when you are finished.
Post back.

Highlighting text won't stay on

When I highlight text it often won't stay on, and when it does and I try to move the selection, it just beeps at me and sits there. What's up?

Ok. In System Preferences > General, Apple applies the term “Highlight” instead of “Selection” color.
In Pages v5(.2), I select a passage of text and it reflects my first sentence color setting. You can leave this alone and visit any menu or side panel setting, and the selection in the body text will remain selected. It will remain selected, if you leave the Pages document and click in another application. When you return to this Pages document, click anywhere but the body text to regain document focus. The next click in the body text should be a click/hold/drag on the selection to move it, or a press of the space bar to remove the selected text. This is mouse-based behavior.
If you are using a Trackpad, whether built-in or external, you must be very careful not to brush against it while in your Pages document, or your selection focus will be lost.
I am using the above Pages on OS X 10.9.4 and do not experience a loss of selection, or an inability to drag/move or remove the selection. I have tried with both mouse and Trackpad following the preceding guidelines and cannot reproduce what you have stated.

Cell border with categories not possible?

Several tables in my worksheet. Those without categories... I can format cell borders. Those with categories, no way. Can't select cell borders or apply line effects to a manually-selected cell border. Is there a workaround?

You are right. I also discoverd that .NET has an implementation for this. Well, I hate to resort to .NET but have no choice.

When I boot up my Mac, Messages opens automatically. I quit the app, but it just re-opens itself. It won't stay off!!! I can't figure out what's wrong with it!

For the past few months, my Mac has been acting weird. EVERY time I boot up the computer, Messages opens automaticallly (I am runing OS X 10.8.x). I quit the app, but it just re-opens a few seconds later! It just won't stay off! I've looked it up online and nothing helps. I have no idea what to do!!!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Folders in Files Panel won't stay collapsed

There are 2 folders in my Files Panel which won't stay collapsed. When I open Dreamweaver, they are expanded. If I click the arrow next to them a few times they will eventually collapse, but then as soon as I open any other file or folder they re-expand themselves. This first started back when I was using Dreamweaver CS5 with one folder which refused to collapse. A year later, I had updated to Dreamweaver CS6, and now had 2 folders which wouldn't stay collapsed. This morning I updated to Dreamweaver CC, and the same 2 folders still won't stay collapsed!
I searched the forum and found people with the same issue going back to 2007, but have yet to find any solution. A few people recommended editing the Windows Registry - but I'm using the Mac version. Several people said that they had some luck completely deleting the site settings and re-creating it - but that seems a bit extreme, plus several people said that it just started happening again later with another folder!
Does anyone have a permanent solution??
Here are a few of the other posts regarding this issue:
http://forums.adobe.com/message/4418090
http://forums.adobe.com/message/975917
http://forums.adobe.com/message/3596836
http://forums.adobe.com/message/938616
http://forums.adobe.com/message/809937
Also - just as an FYI. If I rename the folder, it stops happening. I can close and restart Dreamweaver and it stays collapsed. But, as soon as I rename the folder back - even if I do so after closing and reopening the program - it starts doing it again!!
Not sure if this is related either - but I saw in someone else's post that setting Related Files to Automatically, instead of Manual, fixed the problem. I did try this, to no avail. I even tried many times to turn off Related Files (by unchecking the Enable Related Files box in Preferences) but it keeps re-enabling itself!

As Jon Suggested , try rebuilding the site Cache
Allow me to Quote another DW user
First let me add here that I did find that when I upgraded to the new Creative Cloud version of DW and it imported my 12.0 site settings, the problem followed those settings into the 13.0 version.
Im on a Mac so these instructions would need to be taylored to the PC in regards to the location of the file referenced. And I am not sure if it's even the same file on the PC. So I can only speak for my experience on the Mac.
I've fixed my 12.0 version and my 13.0 version this way.
It was a corrupted "Site Prefs" file. I tried to fix it, but the entries where so mixed up that there was no way that was going to work. So I deleted the "Site Prefs" file and let DW recreate it.
In order to recreate the Site Prefs file, it meant loosing all of my site settings.
To make things less painful...
Open DW and go to Manage Sites. Select all sites and do an export of all .ste files, with passwords and user names, into a temperary folder and close DW.
Now find file folder called "12.0" or 13.0" in the Library/Application Support/Adobe/Common/12.0 (13.0 for the cloud version)/Sites/ and rename it to "12.0_old" or whatever. (Note: you may need to Option-click the Go Menu in the Finder in order to get the Library choice to appear).
Reopen DW and it will recreate a new blank "Site Prefs" file. Go to "Manage Sites..." and click on "Import Site". Select all of the .ste files and import them.
DW will update the site's cache the first time you open each site and it might also ask you to give permission to access the password stored in you keychain. Choose "Always Allow" for each one.
That's it. Now my corrupted folder doesn't pop open every time I click on another folder.
Mac OS 10.7.5
DW CS6 (12.0 build 5861) &/or DW CC (13.0 build 6391)
As I said, this worked great for me. But use these steps at your own discretion.

Cell Border (Properly selected, finished) won't stay

Similar Messages

Maybe you are looking for