Cell border with categories not possible?

Several tables in my worksheet. Those without categories... I can format cell borders. Those with categories, no way. Can't select cell borders or apply line effects to a manually-selected cell border. Is there a workaround?

You are right. I also discoverd that .NET has an implementation for this. Well, I hate to resort to .NET but have no choice.

Similar Messages

Cell (tower ID) with J2ME (not possible?)

Hi
I heard that it is just not possible to get cell tower ID, Network ID, etc through the J2ME framework.
Is that true? I know there is some implementation but that requires some sort of licence. Is there any open-source J2ME API that I am not aware of?
thanks a lot

You are right. I also discoverd that .NET has an implementation for this. Well, I hate to resort to .NET but have no choice.

Saving of assigned item categories not possible

Hello Guru,
I wanted to create Open Items and Bank Statement Files using program RFEBKATX. When I am executing, I get the error message "Item category 04000 not allowed in accounting transaction 0200 / 0001.
So, I tried to add the entry 04000 in Accounting transaction variant 0001. The problem is, that it`s not possible to save the entry. If I try to do, I get no message that saving was successful and when I leave the table, the entry is not longer available.
Why is it not possible to save the entry?
I tried the same with creating a new Accounting transaction variant. The result was the same.
Best regards
Phillip

Dear Phillip,
The probable reason why you are getting this error is you are combining some cash transactions in the process which you are doing.
SAP would not allow you to change the existing transaction variants.This is a standard behaviour and there is no error. If required, copy the existing variant and create a new variant and include item category 04000( Cash) . Assign the same to your document type.
Strange that you are not able to create a new item category. I understand that system will not allow to create a business transaction, but create a new accounting transaction variant and have all your desired item categories.
Check the below path for customising
General ledger accounting(new)-Document splitting-extended document splitting.
Thanks
Aravind
Edited by: Aravind Aitipamula on Nov 11, 2010 5:16 PM

Configuring Netgear WLAN-Router with Safari not possible

Hi,
I've got a problem with safari and my netgear router WGT624v2. In a fromer safari version it was possible to configure the router via the config-page. But with my current safari version it is not possible. I can logon, but to only thing I coud see is cryptic HTML-Code. Firefox isn't able, too. The only browser which could manage this is MS Internet Explorer.
Maybe this has something to do with active x? Could a former safari version handle active x, and the current could not?
Does anybody have the same problem?
regards
Benni

Hi Benni and Welcome to Apple Discussions ...
Could be possible Microsoft isn't supporting Active X to the latest Safari update?? Try the Support and FAQ's at the Netgear site:http://kbserver.netgear.com/downloads_support.asp
Carolyn
Message was edited by: Carolyn Samit

Waking up the Mac from a complete power OFF with WOL not possible, ***

I was told by AU applecare stuff that ALL Mac cannot be woke up from a complete power OFF. I asked the team at applecare because my mini server won't do a WOL.
Is this for REAL?
Can't I do WOL on Macs?
What a horror! How is this possible in this day and age? Macs are intel macs now, and it is just a matter of the network card/chip has this build in. A $200 PC can do this ages ago.
It is huge environmental disaster if we cannot wake the Macs from power off remotely via LAN/WAN, and putting them to sleep when not needed.
Can someone help brighten up my day by pointing me to some official documentation on this or you real experiences on waking up a Mac with WOL
from a complete power OFF?

Maybe necroposting here, but HRMUser is right. Many (most?) modern PCs support WOL from a powered-off (shutdown) state. PCs that support WOL usually have a BIOS setting that allows you to enable/disable it. The network interface itself is powered enough that it will "see" magic WOL packets. I regularly use this feature for PC administration. It's annoying / silly that Macs don't support WOL from power off.

Remote session via RDGW fine with Windows - not possible with Mac ...?

Hi,
I've configured a fresh single RDS Server (all roles on one Server including Gateway) based on Windows Server 2012 R2. Everything works fine when we use Windows 7 with current RDP Client to connect via Gateway/HTTPS.
When we use a Mac (OS X 10.9.3) with current Version of "Microsoft Remote Desktop" (8.0.7), no RDP Connection is established. Error message: "Unable to connect to remote PC. Please verify ...". Login on <external.domain.name>/rdweb
works fine and I'm able to download the .rdp-file and open it with Microsoft Remote Desktop, but after a few seconds the error above appears.
I did some traffic analyzing on our Firewall and it seems that the Mac try to connect on port 3389 on the public ip of the RDS Server, which is blocked. I manually configured a RDP Connection with Gateway - same error. The log of Microsoft Remote Desktop:
[2014-May-22 11:58:30] RDP (0): Final rdp configuration used: gatewayhostname:s:<external.domain.name>
screen mode id:i:2
use multimon:i:1
session bpp:i:32
full address:s:<external.domain.name>
audiomode:i:0
username:s:
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
redirectprinters:i:1
bookmarktype:i:3
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.<name>_RDS
[2014-May-22 11:58:30] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-22 11:58:30] RDP (0): lo0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-22 11:58:30] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-22 11:58:30] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-22 11:58:30] RDP (0): gif0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): stf0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en0 af=30 (AF_INET6) addr=<address>%en0 netmask=ffff:ffff:ffff:ffff::
[2014-May-22 11:58:30] RDP (0): en0 af=2 (AF_INET) addr=<address> netmask=255.255.255.0
[2014-May-22 11:58:30] RDP (0): en0 af=2 (AF_INET) addr=<address> netmask=255.255.255.0
[2014-May-22 11:58:30] RDP (0): en1 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): fw0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en2 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): bridge0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): p2p0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): --- END INTERFACE LIST ---
[2014-May-22 11:58:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-22 11:58:30] RDP (0): client version: 8.0.24875
[2014-May-22 11:58:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-22 11:58:30] RDP (0): correlation id: 7a0a5e55-c35a-c642-882e-788a487a0000
[2014-May-22 11:58:30] RDP (0): Resolved '<external.domain.name>' to '<external ip address>' using NameResolveMethod_DNS(1)
[2014-May-22 11:58:38] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-22 11:58:38] RDP (0): ------ END ACTIVE CONNECTION ------
I remember that there was an issue to establish SSO based on DNS resolve (external Domain Name to internal ip address via Gateway Connection); but we resolved this with a new DNS Zone. But why is it fine on Windows, but not on Mac OS X with Microsoft
Remote Desktop? I wondering why the MRD is not using the Gateway Connection to resolve the RDP host ... ?
Many thanks,
Erik

And log from situation 1:
[2014-Jun-03 14:43:36] RDP (0): Final rdp configuration used: redirectcomports=0
disable themes=0
allow font smoothing=1
session bpp=32
negotiate security layer=1
disable wallpaper=0
full address=rds.something.com
rdgiskdcproxy=0
[email protected]
disable cursor setting=0
gatewayusagemethod=2
use redirection server name=1
compression=1
gatewayprofileusagemethod=1
keyboardhook=2
remoteapplicationmode=0
allow desktop composition=1
connection type=6
alternate full address=rds.something.com
drivestoredirect=*
gatewayhostname=gw.something.com
displayconnectionbar=1
networkautodetect=1
redirectposdevices=0
gatewaycredentialssource=0
screen mode id=2
bitmapcachepersistenable=1
disable full window drag=0
shell working directory=
workspace id=rds.something.com
redirectprinters=1
kdcproxyname=
redirectclipboard=1
use multimon=0
disable menu anims=0
prompt for credentials=0
authentication level=2
audiocapturemode=1
audiomode=0
autoreconnection enabled=1
enableworkspacereconnect=0
bandwidthautodetect=1
alternate shell=
videoplaybackmode=1
promptcredentialonce=1
redirectsmartcards=0
winposstr=0,3,0,0,800,600
devicestoredirect=*
loadbalanceinfo=tsv://MS Terminal Services Plugin.1.something
[2014-Jun-03 14:43:36] RDP (0): Final rdp configuration used: gatewayhostname:s:gw.something.com
screen mode id:i:2
use multimon:i:0
session bpp:i:32
full address:s:rds.something.com
audiomode:i:0
username:s:[email protected]
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
redirectprinters:i:1
bookmarktype:i:3
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.something
[2014-Jun-03 14:43:36] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-03 14:43:36] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-03 14:43:36] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-03 14:43:36] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-03 14:43:36] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): en0 af=30 (AF_INET6) addr=fe80::288:65ff:fe37:7788%en0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-03 14:43:36] RDP (0): en0 af=2 (AF_INET) addr=192.168.21.114 netmask=255.255.255.0
[2014-Jun-03 14:43:36] RDP (0): en4 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): bridge0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): p2p0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-03 14:43:36] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-03 14:43:36] RDP (0): client version: 8.0.24875
[2014-Jun-03 14:43:36] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-03 14:43:36] RDP (0): correlation id: 9c3a9777-747c-704c-86d1-1ace1eef0000
[2014-Jun-03 14:43:36] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-03 14:43:36] RDP (0): ------ END ACTIVE CONNECTION ------
Seems to have disappeared "workspace id=" or is it all right?

H.264 MP4 preset with 920x518 not possible in Compressor?

We need to export our Final Cut projects to different H.264 MP4 sizes. They are 1280x720, 640x360 and 920x517. Unfortunately we didn't find a way to set a preset to 920x518.
What can we do to get that work?
Thanks in advance for every hint.
Heidi

You'll need to use QuickTime Conversion out of FCP (or QT Pro) since Compressor will not create h.264-encoded .mp4 files.
Just for starters:
With your sequence selected or active, *File > Export > QT Conversion*.
Select MPEG-4 from the Format drop-down.
Hit the Options buttons to bring up the MPEG-4 Export Settings dialog
File Format is, by default, set to *MP4 (ISMA)*. Instead, select the MP4 option.
Switch Video Format to H.264.
Alter the Image Size to Custom, then set your width and height.
Check the +Preserve Aspect Ratio using+ box and set the drop-down value to *Fit within size*.
There are, of course, other considerations (Data Rate, Multi-Pass vs Single Pass, Profiles, etc) but that should at least get you started.
Also, in case you're working with an anamorphic format (like, say, DVCProHD or HDV) you have to, if I remember correctly, export a reference movie out of FCP first. Once that's done, open it in QuickTime Pro and set the Conform Aperture property to Production. Then export out of QT Pro. Oherwise, I believe you'll end up with distorted .mp4s since your sequence footage isn't square-pixel.
Of course, this is non-factor if you're working in a square-pixel format

Batch processing with JTA not possible?

hi ng,
i'm hoping that someone can tell me if it is actually possible to use JTA transactions in non-app server spawned threads and, if so, how to do it.
The problem we have is that we need a demon thread executing updates over a cached cluster (hence the need for JTA), but sun 7 uses a thread local to store the context and transaction info, if we try to perform JTA transactions in our own thread it bombs out from trying to lookup the missing data.
We've tried to re-create what is expected in the thread local and bind it in but this is a large hack involving changing accessibility levels etc and we can't even get it to work anyway.
The other option we've considered is to do the processing in a servlet but that would make the process widely accessible.
Any help would be most appreciated.
Thanks,
Cam

Hi Marje,
It's possible to include both resizing and image overlay in a custom Fireworks command that can be used in batch processing. To get started, you could check out this tutorial that deals with the first step.
That article describes how to perform image resize and overlay (in that case, a watermark), and then how to record the steps and turn them into a custom command that can be later used in batch processing.
Once you saved the custom command, click File >> Batch Process, and follow the steps below:
In the first window, select the images you want to process.
On the next screen, open the Commands dropdown menu and select the custom command you created (it'll probably be on the bottom of the list), and click the Add button to include it in the batch process list.
Finally, on the next screen select the location of the processed files, and optionally save the batch script for later use.
Good luck!

Multiple currency transaction with DI not possible

Hi all!
I'm trying to make a jounral entry with multiple currencies. For example I want to book on Debit in EUR and on Credit side in USD. When I want to add the journal entry I got an error:
Transaction includes more than one currency.
I can reproduce the error in Business One, making a Journ Entry in the form. But there I have a form setting called "Allow multiple currency transactions". When I check it I can add my journal entry without any problem.
Can anyone help me find a solution in this?
As the Add-on I'm developing is a stock-exchange reporting tool and it passes journal entries to B1, multi currency transactions are regular task
Thanks!
Jörg

Ok, I find a solution by myself.
In the AdminInfo object is a property called MultiCurrencyCheck. When this is set to cc_NoMessage, I can save the journal entry.
If you want to change this setting in Business One:
Select Administration --> System Initialization --> Document Settings --> Per Document tab --> Journal Entry tab
There is a check box "Allow multiple currency transactions". The description is wrong and it should say "Block multiple currency transactions", like the other. When it is unchecked, I can make multiple currency transaction otherwise not.

Solver VBA SolverAdd constraints with decimals not possible

This issue is related to the German versions of Excel, it tried all from XL2002 up to XL2013.
I can add a constrain with decimals to the solver manually and it works as expected:
When I record a macro the recorded constrain line is this:
SolverAdd CellRef:="$A$1", Relation:=3, FormulaText:="0,001"
But when I run that line the constrain is always ">= 1", the decimal part is missing! I tried all variations that I can think of, but nothing works. When I run this macro:
Sub Makro1()
SolverReset
SolverAdd CellRef:="$A$1", Relation:=3, FormulaText:=0.001
SolverAdd CellRef:="$A$1", Relation:=3, FormulaText:="0.001"
SolverAdd CellRef:="$A$1", Relation:=3, FormulaText:="0,001"
End Sub
The result is this:
How can I set a constrain with decimals into the Solver?
Andreas.

The answer for this from Frontline Systems Inc. is:
This is an old VBA bug.
Just use:
FormulaText:="=1"
Rather than
FormulaText:="1"
That sounds strange... "old VBA bug"?? VBA is able to detect and work with the language depended decimal delimiters and such things!
So I went a little into the depths and have looked more closely at SOLVER.XLAM and there I found the bug:
If "." <> Application.International(xlDecimalSeparator) Then
dummy = InStr(FormulaText, Application.International(xlDecimalSeparator))
Do While dummy <> 0
Mid(FormulaText, dummy, 1) = "."
dummy = InStr(FormulaText, Application.International(xlDecimalSeparator))
Loop
End If
If Not IsNumeric(FormulaText) Then
On Error Resume Next
If TypeName(FormulaText) = "Range" And Not IsCellReference(Stylecheck(CStr(FormulaText))) Then
FormulaText = FormulaText.Address
End If
FormulaText = CStr(FormulaText)
FormulaText = Stylecheck(FormulaText)
On Error GoTo mainerror
Else
FormulaText = CDbl(FormulaText)
End If
They replace the "," with a "." and then they call CDBL (and not VAL), that is the reason.
In Germany (Europe) the "." is the thousand delimiter and the "," is the decimal delimiter. And CDBL knows that!
Okay, so why does "=0,0001" work? Obvious the CBDL line isn't executed in this case.
The solver routines creates hidden names in the sheet and store anything there. If you like to see them execute this:
Sub ShowNames()
Dim N As Name
For Each N In Names
N.Visible = True
Next
End Sub
And names are also language depended, but when we want to store values into a name we have to "speak" English.
The code changes "=0,0001" to "=0.0001" and stores that into the name manager. So when we look into the names we can see "=0,0001" at screen (in Europe).
And the Solve routines grabs that values... what a mess. :-)
If you want to write language-independent programs therefore this syntax is recommended:
SolverAdd "A1", 3, "=" & 0.0001
Andreas.

CAL - Access system with GUI not possible

Hi,
we have activated the SAP hybris Marketing instance with AWS.
It all seems to be activated successfully. The AWS Cloud instance is running.
But if we want to access onto the system with gui, the following error occurs:
We have also entered the entry in the host file, as it is described in the start guide.
Could anyboby help us and give us instructions what to do, that we are able to access onto the system?
Many thanks and best regards,
Mohamed Darwiche

Hi Mohamed,
Most probably you are behind a firewall that does not allow you to open an SAPGUI connection.
You may telnet the list of access points in SAP CAL to get a better picture of the connectivity to your instance: telnet <IP address> <port>
Best regards,
Stanimir

Cell border not appearing in Adobe forms

Hi,
We Placed a button in internal table cell and itu2019s property is set to invisible.
This button is set to visible based on value of other column value in the same row of table.
But border for the cell is not coming when button is invisible.
Note: the button size is equal to cell size and so when we make the button invisible ,the cell border itself is not appearing as the whole cell is invsible.
How make the cell border visible even the button in that cell is invisible.
Please put your suggestions in this regard.
Regards,
Kranti Yamparala.

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

Problem with smart Playlist after Upadte to 10.6 - PLEASE UPDATE SOON, Backup not possible

Apple, Apple, Apple... (again)
Is it so difficult to let things, that are quite good, just there where they are??
After updating my iTunes, OS Lion and some other stuff 2 days ago, I have now a big problem with a smart Playlist in iTunes 10.6. Before updating all things was right.
The problem: Now, AFTER UPDATE, my Playlist ist totally empty!
Before they were over 2000 songs in it.
And because this is my major-smart-Playlist, which is established to my whole other Smart-Playlists, the other ones are also empty.
And this is not the first time Apple.
It´s good, if you - apple guys - just added something like new categories to sort of music (like "iCloud-Status" or some others).
BUT WHAT DID YOU THINK, WHEN YOU DELETED THE OPTION "VALUATION" - mh??? (I hope in english this is the word that used in Itunes - my iTunes is in German)
So I don´t mean the "lines" - I don´t know the right english word - when you see the music. There you can fade in "Album-Valuation" - new - AND "Valuation" - old.
But I mean in the options of the smart-playlists - THERE ARE ONLY "Album-Valuation"!!!!! What the heck....
EVERYONE NEEDS THE NORMAL Song-"Valuation" - and not the album (because normaly you decide by each track how good he is and not by the whole album).
You can let the Album ones in it, BUT PLEASE BRING THE NORMAL ONE BACK.
So, in my case, I tried to go back to iTunes 10.5.3 with my nice Time-Machine-Backup. So, but I couldn´t because there came a bug-message that said something like "It is not possible because OSX need the Programm".
What is that?
I also couldn´t delete the iTunes app from my app-folder.
So, and now?
I had to totally restore my volume !
What is that for a solution?!
So please think before you delete any functions, who is needed by many people.
And if you did, maybe ask some users, that uses for example smart-playlists alot, if there is a problem about some changes, you want to add.
I hope anyone from Apple read this and also answer me. Because I´m upset about that.
In every iTunes-Update I am concerned about what will be after the update.
For example in the past, there was more than one changes in iTunes with the Valuation. First, there was just whole stars to set for every song. Than, after a long time, Apple decided to give the options for also half stars. So I said to myself - hey that´s great, that I don´t have to use external apps anymore to set these. So I did this to many of my songs (and that´s many).
Than - after an Update - wow, all half stars rating are gone ! Great Apple, really great.
I was VERY upset.
So after an other update, the opportunity to give half stars are back.
I thought, my god, it is so difficult to talk with other guys, that worked before on iTunes if I am new or just to look if there was already a change in that part of the app???
So, apple guys, please don´t think that I want to attack you. But please be more carefull in the future. I hope that I don´t have to worry too much about so stuff. I really have better things to do with my time.
So, have a nice weekend.
Greetings from Germany.
Marco Blum

Hi..
Use Lion Recovery to reinstall the Mac OS X.

Smartforms - Is it possible to Customize Cell Border In Template in 4.6C

Hi,
In smartforms, i know that Customizing Cell border is possible with node type TEMPLATE in version 6.20
Our system is 4.6C
But there are many differences between 4.6C and 6.20 about SMARTFORMS.
Is there a way to specify custom cell border without "Select Pattern" option with node type TEMPLATE in 4.6C
thanks
ibrahim

Hi,
As you identify there are some large differences between Smartforms in 4.6c and 6.20. So there is no equivalent of the cell-specific borders in 4.6c
Regards,
Nick

Color fill only changes the border with formula cells

Color fill only changes the color of the border with formula cells. It works fine and changes the color of the entire cell with normal, non-formula cells. Anyone found a way around this problem?

Well, that's better. Thanks for the camera icon tip. That did the trick. However, that does lead to another minor gripe. I cut and pasted these parts of the screen shot into the reply window. They appeared and everything seemed in order. But obviously they didn't send. It looked like it was going to work nice and easy - Apple like. But it ended up requiring more steps and clicks - Microsoft like...
Anyway, as you can see, the cell with the RED expired has not filled with black like, rather the black appears on the border.

Cell border with categories not possible?

Similar Messages

Maybe you are looking for