Cell Broadcast / Cell Info Display is not static i...

Good Afternoon,
I come by this means can try to explain how a situation that saw the Nokias 6210 Navigator.
A customer information to activate the cell and the cell to receive the information by the same operator appears next to the hours over the name of the profile but is not static, or appears and disappears immediately.
In other Nokias I have checked the information of the cell is always static display of the phone does not disappear. I wonder how can get this information to Nokia to the next versions of firmware updates to correct this situation, there are customers who use certain services of the operators such as the case of TMN TMN that has regional and customer needs to see what indicative of the area where you are and thus becomes complicated because you do not see the same information by not being static.
Can perform this experiment with a Nokia 6210 Navigator and a Nokia E65 or 6630 and others in which information is fixed.
It was with considerable difficulties in Spain which could capture information of the cell with Nokia 6210 Navigator, and therefore opted to take pictures with a nokia 6630 and N-Gage.
No other matter of time, support me with high esteem and consideration
Carefully
Examples:
Nokia 6630
Nokia 6210 Navigator
Message Edited by rsaraiva on 23-May-2009 03:51 PM

If it helps, it may be whether operators actually support it, as my nokia x6 from vodafone use to display it but as soon as I unlocked it and siwtched to T Mobile it's stopped. I have now just switched it onto gsm connection only and it doesn't work so it could well be operator support dependent

Similar Messages

N95 Cell Broadcast & Active Standby not compatible

Hi - I have a N95 with V31 software and it STILL has the same problem.
2G Cell Broadcast information isnt displayed (only displayed for 1 second) when the Active Standby is on
Anyone know when this will be fixed?
Also does it do it in the N97 too?

The ability to view texts/emails on the stanby screen is a feature only offered to the business E-Series phones.
I too would like this on my N95, but alas we cannot!
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

How to enable Cell Broadcast message in Iphone5

Hello!!
I work at True Corp. in Thailand. I would like to use Cell Broadcast System by using Iphone5 for receving Cell Broadcast message from Radio Site. I cannot find Cell Broadcast setting in Iphone5, I am not sure I have to new software from Apple or not?
How to enable Cell Broadcast function in Iphone5?
Note: Reference from this Website https://smscellbroadcast.wordpress.com/tag/iphone/
Thank you

In your case, you need to reset the router to factory defaults, at which point the SSID will be set to broadcast and it cannot be disabled. To know more about why there is no option to disable the SSID broadcast anymore on the Cloud firmware, click here.

Cell Info Display Problem

Past 2 days , my Nokia N71 cell info display gets stuck only showing one area or doesn't show at all, even though moving to another area doesn't change. To update cell info display i need to restart my phone or i need to go settings then i select cell info display then change to off then again on. But i have also Nokia 5700 XM but it doesn't face the same problem and it is also subscribed to same network as n71.
my N71 fimware is V 2.0642.1.05
Please someone give the solution to the problem.
Best Regards

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

Cell info display on Nokia 701

Hi every body, My Nokia 701 is not displaying cell info i.e name of area or name of tower covering my phone even though I set info display to on in pull down notification menu right from time of purchase. Is this problem specific to my phone. My old phone Nokia X3-00 was showing cell info with 2G sim. Now I am having 3G sim inserted into my phone 701. But cell info display is off either with 2G or 3G coverage.

I jsut checked it on my c3 00 with vodafone and it started showing some special offers on home screen.
But I tried the same on my 701 with aircel and it doesn't show any of that.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Nokia X1-01 Cell Info Display Problem

My X1-01 sw version 05.27 ,26-05-11,RM -713, Language: MG
The problem is that it does not display Cell Info display correctly. Only few times it shows, But only for sometime. Is this bug fixed in the latest version 5.44 ???? and it also has the signal problem .. If i put it in my pocket , the whole signal goes away in both sims....

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

Using Cell Info Display in MIDlets

How can I access the " Cell Info Display " provided by GSM service provider from our MIDlets to get some location idea from Nokia Series 40 or 60 Mobile Handsets ?
Without using Locational API's, is their any Native mathods aceesable for this, provided by any Nokia ?

Well, that's a very popular question.
What i have found until today is summarized below.
1-) No, there are no methods for getting Cell ID or Local Area Network. Most provider's don't provide it (intentionally). Some Motorola phones accept a call like System.getProperty("phone.cid") or System.getProperty("Siemens.CID")
2-) I suggest you use C++ if your phone supports symbian. There is not a standar way, but using etelcom Apis you can get the Network information.
Look for more details on official nokia forums.
3-) Good luck, and tell me if you could manage to finish your app.

Cell Info Display option in iPhone

Hi, I am using iPhone 5. I need to know that 'do we have an option to Display Cell Info like we do have in Nokia handsets'. This will display the real time tower location info on the screen. This information should be displayed everytime handsoff occurs and this should work without opening any external installed app. Thanks.

09-Sep-2008 04:21 AM
engshiraj wrote:
Thank you it_is_me!
What you had written is correct, when selected GSM only it displays the cell info.
However, in Sri Lanka, where I live, the operators are using GSM and UMTS in a complementary fashion that when you put on to dual mode the coverage is high.
I am subscribing to two operators, Dialog and Mobitel. In the Dialog network even if you put to dual mode it displays the cell info. This happenedwith Mobitel network only.
Anyway, thank you very much for the information.
You are welcome , also bear in mind that cell info display that can be activated in E71 is not only 3G , it's 3.5G and this could make difference when it comes to network services .
citation needed .

Cell Info Display

Hey. I have an n8. When i turn on the cell info display. Where does it display?

Normally it is displayed at the place where your active Profile is displayed ...
Not sure where are you located..but here in India the Cell Info Displaye just comes on only when the screen is activated from the standby mode..and it remains hardly for a second..then it displays the active Profile..

Receiving info through Cell Broadcast

hello!
I am trying to receive a cell broadcast message on cbs://:50.
my phone is a nokia 6230i which supports WMA and MIDP 2.0; the application works under WTK2.2, but not in real life. My GSM provider is Vodafone, and they do send CB messages (i receive them on the phone, but not with the application).
i have seen a similar thread (http://forum.java.sun.com/thread.jspa?forumID=76&threadID=708476) -the code is basically the same- but the post has no answers.
does anyone have a hint?

Hi, I have to get the cell id of the network where my mobile is located.
Do you think it's possible with cbs? If yes, how can I extract the value I need from the message I get?
alberto

Cell Broadcast reception on iPhone - is it possible ? How to enable it ?

Hello, all.
I'm working in a company that develops software for mobile operators, such as SMSC, USSDC, Customer care, Billing, etc...
One of our products is Cell Broadcast center.
Our clients use Cell Broadcast to give different services to their subscribers, such as location based discounts. For example, in some areas with low traffic a cell broadcast message is broadcasted - "Discount 20%". The subscribers see such messages on their phone and prefer to call from "cheaper" areas.
The problem is that these messages are not displayed on iPhone.
I've checked through all menues on iPhone and iPhone 3G, and couldn't find anything like "Cell Info Display" \ "Cell Broadcast" (like on Nokia phones), "Channels" (like on windows mobile Samsung), "Info services" (like on Motorola) or anything like this.
At the same time I know that iPhone is able to receive Cell Broadcast messages, since it's able to receive data on sim-card related cell broadcast channels (such as 1000h) and pass it to sim-card.
So my question is - can Iphone be configured to receive ordinary text Cell Broadcast messages (on channels 0-999) and show them on the title screen or in Messages (Mail) menu ???
Maybe there is some "secret code" to enable cell broadcast (like the one used to change SMSC address on iPhone) ???
Best regards,
Yury

I second that! It was a very useful function on my Nokia back then. Now I'm a proud owner of the iPhone 3G and it'd be really great having an opportunity of recieving broadcast messages on Apple's cell-phone as well.

N95 Cell Broadcast Question ?

Hi.
I've been used to when "Cell Broadcast" is enabled for Topic 050 that on the display is shown from where I receive the signal.
In my N95 I'm only getting mesages telling me from where the signal is received but nothing is shown on the display.
Can someone of you guys tell me how to set it up that my phone won't alert me with a message received and only shows on the display from where I receive my signal.
Any help is very much appreciated.
Thanks in advance,
Tommy

Just put cell broadcast to off & it won't bother you anymore. By the way you have to subscribe first to a particular topic in which your isp provides such as traffic condition or whatever, so it can be send to you & displayed on your phone.
Message Edited by android on 09-Feb-2009 06:23 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

How to stop cell broadcast 50

I keep getting this Cell broadcast 50 message and I can't find how to stop it. I also find the lack of control options upsetting. Past BlackBerry gave awesome options and user friendly where as my Z10 limits my usage.

Can you not unsubscribe from the broadcast messages?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cell Broadcast question

I have 2 questions that I need help with. First, is in the hub settings there is a option to enable or disable Cell Broadcast. What function does it serve? And second does it use battery resources?
Thanks

Cell Broadcast
It won't consume battery resources unless it is being utilized.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to configure Cell Broadcast channels on Z1 compact?

Just got my Z1 compact (wow!) and now I want to enable some (but not all) cell broadcast channels, zo I can receive emergency messages from the dutch governement. They are on channel 919.
Normally I would look on the configuration menu of either the Messages app or on the Settings, Networks menu. Neither shows anything resembling the Cell Broadcast configuration.
I downloaded and installed the Nexus cell broadcasting apk, but I can only enable/disable the US emergency messages.
How do I configure indivdual cell broadcast channels?
Robert

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
There are no specific settings that you can adjust in the phone for cell broadcast.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Cell Broadcast / Cell Info Display is not static i...

Similar Messages

Maybe you are looking for